samsung galaxy s7 lcd screen replacement in stock

The video guide recommends removing the battery, SIM tray, and motherboard. This is not necessary, but it does make heating the phone safer. This procedure is only recommended if you"re replacing the battery and the screen at the same time.

This guide instructs you to replace only the display while leaving the original frame, logic board, and battery in place. Note: some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires you to transplant all of your phone"s internals and install a new battery. Make sure you have the correct part before starting this guide.

If the frame is damaged or bent, it"s important to replace it, or else the new screen may not mount correctly and can suffer damage from uneven pressure.

With uBreakiFix, getting a Samsung Galaxy S7 repair won’t ruin your plans for the day or put your life on hold. We can fix every issue you are facing with your device from a cracked screen or battery that won’t hold a charge. We’ve got knowledgeable technicians and high-quality parts to complete any Galaxy S7 repair you might need. There’s no reason to go out and buy a brand new device when a repair is all you need.

We’ve got an expert service to fix any issue your device is facing. Whether your phone has a cracked screen from taking a tumble, or has water damage from falling in the pool, we’ve got a repair service for that. Nobody has time to be away from their device for long periods of time, especially when you need to catch up on work or stay connected with your family. We promise that we’ll never keep your device for longer than necessary to complete the repair. Our most common repairs like our screen, battery and charge port repairs usually only take an hour to complete. Other repairs can take longer depending on part availability and the extent of the damage, but we promise to keep you updated at every step of the repair process so you know exactly what is going on with your device.

Our repair diagnostic is a simple and easy way for our technicians to determine which of our services will best solve the issues that you are having with your Galaxy S7. This service is completely free for all customers and there is never any obligation to continue with a repair after the diagnostic. During the diagnostic, a tech will examine the surface of the device as well as test a few basic functions such as the camera, battery and microphone. This helps determine if the problem is concentrated to one component or if any other components of the device were affected. Once we determine the issue, the technician can recommend a repair service as well as provide a quote. We don’t believe in surprising anyone with hidden fees or taking on extras that you don’t need, so the price you are quoted is the price you’ll pay.

We offer a 1 year warranty on all of our repaired devices just in case anything goes wrong after you leave our store. This warranty is valid at any uBreakiFix location across the country so no matter where you and your Galaxy S7 go, you’ll always be covered.

Start talking to our suppliers on Alibaba.com to find the perfect cell phone lcd screen shipment for your needs! Our wholesalers offer top to bottom, left to right model phones to keep your inventory on point.

The reason many phones use s7 edge screen replacement rather than LED or AMOLED screens is because of their relatively cheaper cost. Additionally, smartphone lcd screens also use less power than LED or AMOLED screens and therefore help conserve battery power. With today"s powerful apps, this can be a real advantage for those who do not like to or do not have the ability to charge their phone frequently.

On Alibaba.com, finding the right s7 edge screen replacement for any make or model of phone is very easy. We have multiple options from our many wholesalers for each specific s7 ed screen replacement you need for specific phone models. For phone screens, lcd smartphone screens are seen as a more cost-effective alternative to led screens. With the prevalence of damage on the screen, there is a huge demand for replacement lcd screens for phones. Many people are walking around with cracks on their screens and they will be looking for a smartphone lcd screen replacement. So, stock up on replacement lc screens today!

For Samsung Galaxy S7 SM-G930/G930F/G930A/G930V/G930P/G930T/G930R4/G930W8 LCD Screen and Digitizer Assembly Replacement - Black - With Logo - Grade S+

How to Install / Tips:Special repairing tools are required for assembling or disassembling, as the Galaxy S7 LCD display and digitizer are hermetically attached.

Heat up along the sides of Galaxy S7 for 1~2 minutes, the back cover is glued to the rear housing with waterproof adhesive, which is pretty sticky. Pay your patience on this step and make sure the Galaxy S7 back cover adhesive is nicely warm and loosen.

Insert the spudger tip into the back cover and carefully raise it up so as not to damage the fragile glass, stick a plain card in and walk it around, then insert a guitar pick and run it along the edges of Galaxy S7 back cover. The adhesive is easily cooled down, you"ll need to heat it up back and forth before releasing the back cover. Likewise, be patient.

Now the Galaxy S7 back cover was pulled out from a large portion of strong adhesive as you can see from the below picture, also avoid to hurt the fingerprint sensor in the middle of rear housing while you"re heating.

The connetors include: 3 antenna cable connectors, volume button flex connector, power button flex connector, home button flex connector, front facing camera connector, rear facing camera connector, LCD assembly connector, battery flex connector and ear speaker flex connector.

Heat up around the edges of Galaxy S7 LCD assembly back and forth to soften the front housing adhesive underneath. Pay your patience, the Galaxy S7 LCD assembly and frame are bonded by extremely sticky waterproof adhesive so as to make it IP68 protected. The waterproofness of Galaxy S7 will lost once the screen was replaced unless you apply the adhesive as sealed as the original manufacturer made, which is almost impossible to realize.

Wear a pair of gloves to avoid your hands being hurt by the hot display. Carefully insert the tip of a plain card into the gap between LCD assembly and frame, run it back and forth to weaken the adhesive.

Now the Galaxy S7 LCD assembly and frame are successfully separated. Looks like it"s so easy, isn"t it? I"m afraid not, tedious maybe more appropriate. Anyway, get your patience and chariness prepared.

In Union Repair store, we grade our iPhone screen into 5 different types of quality on the basis of different material assembled. The following is the full details of each condition.

It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.

It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.

The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality.

No doubt, it is tear down from used iPhone with all the parts 100% original and working perfectly just like an original new screen, it has whatever the original new screen has. The only complaint about this quality is that some of the displays are with 1 or 2 scratches but still be welcome by our critical customers who are requiring good quality.

It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F.