standard lcd displays pricelist

Computer monitors are a must-have for PC users and hardcore gamers. Consumers may be looking at computer monitor buying guides and wondering just how much a typical computer monitor costs and the overall price range of displays.

Generally speaking, LCD displays are the cheapest type of modern computer monitor. LED displays, which are based on the same technology as their LCD cousins, tend to be slightly more expensive while OLED displays are the most expensive of all. The latter being due to the high-priced components that make up the OLED technology.

Modern computer monitors can boast resolutions as high as 8K, offering stunning and true-to-life visuals and graphics. 8K, and even 4K, displays feature newly adopted technological advancements. As such, the higher the resolution, the costlier the monitor. If you are looking to snag a high-quality monitor on the cheap, go for an HD display with a 1080p resolution.

If you are using your PC to stream content or to play graphically intensive games, then the refresh rate is an incredibly important consideration. The refresh rate indicates how often your monitor refreshes the screen. As for price, monitors with ultra-high refresh rates, above 120Hz, tend to be more expensive than displays with refresh rates of 75Hz or less.

The overall size of a computer monitor, and its width, can impact the overall price. Typically, ultrawide monitors and displays that are larger than 34-inches tend to be on the expensive side. This price continues to increase as the monitor size increases. Get the size that may cater better to your needs if you need the monitor for a specific task, like the best size monitor for gaming should help make your gameplay more efficient. Ultrawide monitors and larger-than-average monitors can significantly increase the viewing angle, which can be a useful benefit.

Manufacturers have discontinued their lines of bulky CRT monitors in favor of slimmer, brighter LCD monitors. Many monitors are designed to double as TV and movie screens or computer displays. Selecting the right LCD monitor depends a lot on how users intend to use the product, be it for working, playing games or watching movies.

A budget-priced LCD monitor can be purchased for about $100to $200. This type of LCD monitor is a low cost way for students or general-purpose users to upgrade from an old CRT unit. Expect a 15- to 20-inch screen, either standard 4:3 or widescreen format, with a maximum resolution of up to 1600 x 900. Even budget monitors should have a response time of at least 12ms, fast enough to play video games or watch DVDs. An example of an inexpensive monitor is the Acer V173b, a 17-Inch LCD monitor with 1280 x 1024 maximum resolution available for a shade under $100. The HP 2009M[1] is available for about $150and offers a 20-inch HD screen with a maximum resolution of 1600 x 900.

Sharp NEC Display Solutions incorporates both Sharp and NEC brands of display products. Including desktop, 4K and 8K UHD large format, video wall, dvLED, collaboration and interactive products, Sharp/NEC offers the widest portfolio of displays available. Understanding that every market and environment has unique requirements, Sharp/NEC prides itself on being your partner, delivering customized solutions to match your needs.

23.8" LED-backlit LCD monitor / FHD (1920x1080) resolution IPS display / 178° (H) 178° (V) viewing angle / 250 cd/m² brightness / 5ms (GTG) response time (in FAST mode) / 1xUSB‑C input (video/audio/60W charging capability), 1xDisplayPort (in), 1xDisplayPort (out) with MST, 1xHDMI, 1xUSB‑C output (data/15W charging capability), 3xSuperSpeed 10Gbps USB Type A ports / 1xDisplayPort, 1xUSB-C to USB Type A cable included / 3 year system/panel warranty

Advanced LED video wall with MicroLED models in 0.6, 0.7 and 0.9mm pixel pitches, and 1.2mm pixel pitch standard LED; with powerful processing, proprietary alignment technology and off-board electronics.

Planar® CarbonLight™ VX Series is comprised of carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility, available in 1.9 and 2.6mm pixel pitch (wall) and 2.6mm (floor).

From cinema content to motion-based digital art, Planar® Luxe MicroLED Displays offer a way to enrich distinctive spaces. HDR support and superior dynamic range create vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge MicroLED technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior décor.

From cinema content to motion-based digital art, Planar® Luxe Displays offer a way to enrich distinctive spaces. These professional-grade displays provide vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior decor.

Advanced LED video wall with MicroLED models in 0.6, 0.7 and 0.9mm pixel pitches, and 1.2mm pixel pitch standard LED; with powerful processing, proprietary alignment technology and off-board electronics.

From cinema content to motion-based digital art, Planar® Luxe MicroLED Displays offer a way to enrich distinctive spaces. HDR support and superior dynamic range create vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge MicroLED technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior décor.

Advanced LED video wall with MicroLED models in 0.6, 0.7 and 0.9mm pixel pitches, and 1.2mm pixel pitch standard LED; with powerful processing, proprietary alignment technology and off-board electronics.

Planar® CarbonLight™ VX Series is comprised of carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility, available in 1.9 and 2.6mm pixel pitch (wall) and 2.6mm (floor).

Carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility for various installations including virtual production and extended reality.

a line of extreme and ultra-narrow bezel LCD displays that provides a video wall solution for demanding requirements of 24x7 mission-critical applications and high ambient light environments

Since 1983, Planar display solutions have benefitted countless organizations in every application. Planar displays are usually front and center, dutifully delivering the visual experiences and critical information customers need, with proven technology that is built to withstand the rigors of constant use.

Do you need a large, crisp image when working at your computer? Are you worried about the sticker shock that usually comes with high quality displays? Those days are over.

At Lenovo, we work hard to design computer displays that fit your budget and provide the higher resolution experience you deserve. No more grainy displays with washed out colors. No more boxy, limited visuals.

Choose from an ultra-slim portable monitor to quickly set up and improve your multitasking even when on the go. Or for a more traditional option, we have displays in popular ranges like24 inches,27 inches,31 inches

Buying an impressive computer displays doesn’t have to be complicated or expensive. Browse our inventory of options based on group, activity, connections, resolution, aspect ratio, and more to find the best fit for your lifestyle. With the right monitor complementing your PC, you can fully realize its potential as a business, gaming, or everyday machine.

Trying to decide between all the types of displays, frames, and panels today’s modern computer monitor can offer? Here are a few common comparisons of monitor types that might help.

Many monitor manufacturers, including Lenovo, also still offerVGA displays. VGA is a more dated method of connecting your PC and visuals but there are still plenty of PCs around that may require this input method.

A computer monitor is an output device that displays information in pictorial or textual form. A discrete monitor comprises a visual display, support electronics, power supply, housing, electrical connectors, and external user controls.

The display in modern monitors is typically an LCD with LED backlight, having by the 2010s replaced CCFL backlit LCDs. Before the mid-2000s,CRT. Monitors are connected to the computer via DisplayPort, HDMI, USB-C, DVI, VGA, or other proprietary connectors and signals.

Multiple technologies have been used for computer monitors. Until the 21st century most used cathode-ray tubes but they have largely been superseded by LCD monitors.

The first computer monitors used cathode-ray tubes (CRTs). Prior to the advent of home computers in the late 1970s, it was common for a video display terminal (VDT) using a CRT to be physically integrated with a keyboard and other components of the workstation in a single large chassis, typically limiting them to emulation of a paper teletypewriter, thus the early epithet of "glass TTY". The display was monochromatic and far less sharp and detailed than on a modern monitor, necessitating the use of relatively large text and severely limiting the amount of information that could be displayed at one time. High-resolution CRT displays were developed for specialized military, industrial and scientific applications but they were far too costly for general use; wider commercial use became possible after the release of a slow, but affordable Tektronix 4010 terminal in 1972.

Some of the earliest home computers (such as the TRS-80 and Commodore PET) were limited to monochrome CRT displays, but color display capability was already a possible feature for a few MOS 6500 series-based machines (such as introduced in 1977 Apple II computer or Atari 2600 console), and the color output was a speciality of the more graphically sophisticated Atari 800 computer, introduced in 1979. Either computer could be connected to the antenna terminals of an ordinary color TV set or used with a purpose-made CRT color monitor for optimum resolution and color quality. Lagging several years behind, in 1981 IBM introduced the Color Graphics Adapter, which could display four colors with a resolution of 320 × 200 pixels, or it could produce 640 × 200 pixels with two colors. In 1984 IBM introduced the Enhanced Graphics Adapter which was capable of producing 16 colors and had a resolution of 640 × 350.

By the end of the 1980s color progressive scan CRT monitors were widely available and increasingly affordable, while the sharpest prosumer monitors could clearly display high-definition video, against the backdrop of efforts at HDTV standardization from the 1970s to the 1980s failing continuously, leaving consumer SDTVs to stagnate increasingly far behind the capabilities of computer CRT monitors well into the 2000s. During the following decade, maximum display resolutions gradually increased and prices continued to fall as CRT technology remained dominant in the PC monitor market into the new millennium, partly because it remained cheaper to produce.

There are multiple technologies that have been used to implement liquid-crystal displays (LCD). Throughout the 1990s, the primary use of LCD technology as computer monitors was in laptops where the lower power consumption, lighter weight, and smaller physical size of LCDs justified the higher price versus a CRT. Commonly, the same laptop would be offered with an assortment of display options at increasing price points: (active or passive) monochrome, passive color, or active matrix color (TFT). As volume and manufacturing capability have improved, the monochrome and passive color technologies were dropped from most product lines.

The first standalone LCDs appeared in the mid-1990s selling for high prices. As prices declined they became more popular, and by 1997 were competing with CRT monitors. Among the first desktop LCD computer monitors was the Eizo FlexScan L66 in the mid-1990s, the SGI 1600SW, Apple Studio Display and the ViewSonic VP140vision science remain dependent on CRTs, the best LCD monitors having achieved moderate temporal accuracy, and so can be used only if their poor spatial accuracy is unimportant.

Organic light-emitting diode (OLED) monitors provide most of the benefits of both LCD and CRT monitors with few of their drawbacks, though much like plasma panels or very early CRTs they suffer from burn-in, and remain very expensive.

Dot pitch represents the distance between the primary elements of the display, typically averaged across it in nonuniform displays. A related unit is pixel pitch, In LCDs, pixel pitch is the distance between the center of two adjacent pixels. In CRTs, pixel pitch is defined as the distance between subpixels of the same color. Dot pitch is the reciprocal of pixel density.

Pixel density is a measure of how densely packed the pixels on a display are. In LCDs, pixel density is the number of pixels in one linear unit along the display, typically measured in pixels per inch (px/in or ppi).

Contrast ratio is the ratio of the luminosity of the brightest color (white) to that of the darkest color (black) that the monitor is capable of producing simultaneously. For example, a ratio of 20,000∶1 means that the brightest shade (white) is 20,000 times brighter than its darkest shade (black). Dynamic contrast ratio is measured with the LCD backlight turned off. ANSI contrast is with both black and white simultaneously adjacent onscreen.

Refresh rate is (in CRTs) the number of times in a second that the display is illuminated (the number of times a second a raster scan is completed). In LCDs it is the number of times the image can be changed per second, expressed in hertz (Hz). Determines the maximum number of frames per second (FPS) a monitor is capable of showing. Maximum refresh rate is limited by response time.

With the introduction of flat panel technology, the diagonal measurement became the actual diagonal of the visible display. This meant that an eighteen-inch LCD had a larger viewable area than an eighteen-inch cathode-ray tube.

Until about 2003, most computer monitors had a 4:3 aspect ratio and some had 5:4. Between 2003 and 2006, monitors with 16:9 and mostly 16:10 (8:5) aspect ratios became commonly available, first in laptops and later also in standalone monitors. Reasons for this transition included productive uses for such monitors, i.e. besides Field of view in video games and movie viewing, are the word processor display of two standard letter pages side by side, as well as CAD displays of large-size drawings and application menus at the same time.LCD monitors and the same year 16:10 was the mainstream standard for laptops and notebook computers.

In 2010, the computer industry started to move over from 16:10 to 16:9 because 16:9 was chosen to be the standard high-definition television display size, and because they were cheaper to manufacture.

In 2011, non-widescreen displays with 4:3 aspect ratios were only being manufactured in small quantities. According to Samsung, this was because the "Demand for the old "Square monitors" has decreased rapidly over the last couple of years," and "I predict that by the end of 2011, production on all 4:3 or similar panels will be halted due to a lack of demand."

The resolution for computer monitors has increased over time. From 280 × 192 during the late 1970s, to 1024 × 768 during the late 1990s. Since 2009, the most commonly sold resolution for computer monitors is 1920 × 1080, shared with the 1080p of HDTV.2560 × 1600 at 30 in (76 cm), excluding niche professional monitors. By 2015 most major display manufacturers had released 3840 × 2160 (4K UHD) displays, and the first 7680 × 4320 (8K) monitors had begun shipping.

Many monitors have other accessories (or connections for them) integrated. This places standard ports within easy reach and eliminates the need for another separate hub, camera, microphone, or set of speakers. These monitors have advanced microprocessors which contain codec information, Windows interface drivers and other small software which help in proper functioning of these functions.

Some displays, especially newer flat panel monitors, replace the traditional anti-glare matte finish with a glossy one. This increases color saturation and sharpness but reflections from lights and windows are more visible. Anti-reflective coatings are sometimes applied to help reduce reflections, although this only partly mitigates the problem.

Most often using nominally flat-panel display technology such as LCD or OLED, a concave rather than convex curve is imparted, reducing geometric distortion, especially in extremely large and wide seamless desktop monitors intended for close viewing range.

Raw monitors are raw framed LCD monitors, to install a monitor on a not so common place, ie, on the car door or you need it in the trunk. It is usually paired with a power adapter to have a versatile monitor for home or commercial use.

A desktop monitor is typically provided with a stand from the manufacturer which lifts the monitor up to a more ergonomic viewing height. The stand may be attached to the monitor using a proprietary method or may use, or be adaptable to, a VESA mount. A VESA standard mount allows the monitor to be used with more after-market stands if the original stand is removed. Stands may be fixed or offer a variety of features such as height adjustment, horizontal swivel, and landscape or portrait screen orientation.

The Flat Display Mounting Interface (FDMI), also known as VESA Mounting Interface Standard (MIS) or colloquially as a VESA mount, is a family of standards defined by the Video Electronics Standards Association for mounting flat panel displays to stands or wall mounts.

A stowable rack mount monitor is 1U, 2U or 3U high and is mounted on rack slides allowing the display to be folded down and the unit slid into the rack for storage as a drawer. The flat display is visible only when pulled out of the rack and deployed. These units may include only a display or may be equipped with a keyboard creating a KVM (Keyboard Video Monitor). Most common are systems with a single LCD but there are systems providing two or three displays in a single rack mount system.

An open frame monitor provides the display and enough supporting structure to hold associated electronics and to minimally support the display. Provision will be made for attaching the unit to some external structure for support and protection. Open frame monitors are intended to be built into some other piece of equipment providing its own case. An arcade video game would be a good example with the display mounted inside the cabinet. There is usually an open frame display inside all end-use displays with the end-use display simply providing an attractive protective enclosure. Some rack mount monitor manufacturers will purchase desktop displays, take them apart, and discard the outer plastic parts, keeping the inner open-frame display for inclusion into their product.

Van Eck phreaking is the process of remotely displaying the contents of a CRT or LCD by detecting its electromagnetic emissions. It is named after Dutch computer researcher Wim van Eck, who in 1985 published the first paper on it, including proof of concept. Phreaking more generally is the process of exploiting telephone networks.

Masoud Ghodrati, Adam P. Morris, and Nicholas Seow Chiang Price (2015) The (un)suitability of modern liquid crystal displays (LCDs) for vision research. Frontiers in Psychology, 6:303.

A close look at the video input interfaces used in LCD monitors. With the emergence of a new generation of interfaces, growing numbers of LCD monitors feature multiple and different interfaces. Image quality and ease of use are likely to depend on how well the user knows and uses the unique characteristics of each interface when connecting the appropriate devices.

Note: Below is the translation from the Japanese of the "IT Media LCD Display Course II, Part 2," published on December 16, 2008. Copyright 2011 ITmedia Inc. Information about Mini DisplayPort was added to the English translation.

Driven by demand for higher-resolution monitor environments and the proliferation of high-definition devices, the types of video input interfaces ("interfaces" hereinafter) found in LCD monitors continue to proliferate. More than likely, significant numbers of users encountering LCD monitors incorporating multiple input systems have wondered what to connect to which terminal. In this article, we"ll discuss, one by one, the main interfaces used today. But first, let"s give an overview of the types of interfaces available.

The interfaces for LCD monitors designed for use with PCs can be grouped into two categories: analog interfaces, carryovers from the days of CRT monitors, and the digital interfaces developed more recently. An analog interface involves the additional steps of conversion of digital signals within the PC to analog signals for output and the conversion of these analog signals back into digital form by the LCD monitor receiving the signal. This series of actions can degrade image quality. (Image quality also depends on the quality of the route used in converting from analog to digital.) A digital interface offers superior image quality, since it transmits digital signals without conversion or modification.

LCD-monitor interfaces also can be grouped by differences in the devices connected. Major categories here are inputs from PCs and inputs from audio-video (AV) devices. PC input generally involves one of the following five interface types: D-Sub for analog connections; DVI-D for digital connections; DVI-I, which is compatible with both analog and digital connections; and HDMI and DisplayPort, representing the new generation of interfaces for digital connections. Other more recent adapters input and output PC RGB signals and LCD monitors using USB as a video input interface.

The main AV input interfaces are composite video, S-Video, component video, D1 – 5, and HDMI. All of these other than the new HDMI standard use analog connections. As with PC input, a digital HDMI connection generally provides better image quality for AV input than the various analog connection interfaces.

It"s worth noting that while HDMI was designed for use with AV input and output, the standard also supports PC input and output. LCD monitors incorporating HDMI ports include some that support PC input officially and others that—whether or not they can display PC input—do not support PC input officially.

Known officially as D-Sub miniature, D-Sub is not exclusive to display use. It"s also used for serial-port, parallel-port, SCSI, and other connectors, with the number of connector pins depending on the purpose of use. However, these connector standards are rarely if ever found in PCs now for general-purpose personal use, most such applications having migrated to USB.

When used as a monitor interface, a D-Sub port is also known as a VGA port, an analog connection standard that"s been around for some time. The connector is a DE-15 connector with 15 pins in three rows, often referred to as a "mini-D-Sub 15-pin" or "D-Sub 15-pin" connector. (Some connectors omit unused pins.) D-Sub is currently the most widely used monitor interface, compatible with very large numbers of PCs and LCD monitors.

The Digital Visual Interface (DVI) standard uses one of three types of connectors: DVI-D for digital connection; DVI-A for analog connection; and DVI-I, compatible with both digital and analog connections. The DVI-A connector for analog use is not in general use and can be disregarded when choosing monitor products.

Keep in mind that there are two types of mainstream DVI-D digital connections: single link and dual link. For a single-link DVI-D connection, the maximum resolution that can be displayed is 1920 × 1200 pixels (WUXGA). Higher resolutions (such as 2560 × 1600 pixels) require a dual-link DVI-D connection providing double the bandwidth of a single-link DVI-D (7.4 Gb/second or higher). To use a dual-link DVI-D connection, the DVI-D input on the LCD monitor side, the DVI-D output on the PC side, and the DVI-D cable must all be compatible with the dual-link DVI-D standard.

DVI-I, the other DVI standard, can be used with both digital and analog connections, depending on the monitor cable used. Since a DVI-I analog signal is compatible with the D-Sub standard, an analog connection can be formed by using a monitor cable with a D-Sub connector on one end and a DVI-I connector on the other. Depending on the cable and the connectors on the PC side and on the LCD-monitor side, it may also be possible to use an adapter for connecting a DVI-I connector with a D-Sub connector.

Monitor cables with DVI-I connectors on both ends were available at one time. These are rare today, since this configuration made it difficult to determine whether the connection was digital or analog and generated frequent connection issues. Having DVI-I connectors on both the PC side and the LCD monitor side can lead to confusion. In such cases, the ideal configuration is a digital connection made with a DVI-D cable.

As the latest digital interfaces, the High-Definition Multimedia Interface (HDMI), DisplayPort, and Mini DisplayPort have attracted considerable attention. All standards offer the capacity to transfer both audio and video signals digitally using a single cable; all offer easy cable attachment and removal.

At left is an HDMI (type A) female connector; in the middle is a DisplayPort female connector; at right is a Mini DisplayPort female connector. The HDMI connector has 19 pins. The DisplayPort and Mini DisplayPort connectors have 20 pins and an asymmetrical (left to right) connector. (The HDMI standard also defines a 29-pin type-B connector compatible with resolutions exceeding 1080p.)

The HDMI, DisplayPort, and Mini DisplayPort standards also are compatible with the High-Bandwidth Digital Content Protection System (HDCP). A technology intended to protect copyright on digital content, HDCP allows authorization of both output and input devices before video is displayed.

Another feature is that HDMI, DisplayPort, and Mini DisplayPort video signals can be converted back and forth with the DVI-D standard, a PC digital interface. Using the appropriate conversion adapter or cable, we can output video from a DVI-D, HDMI, DisplayPort, and Mini DisplayPort connector and input to any of these options. Currently, however, this implementation appears to be imperfect: In certain cases, input and output devices are not completely compatible (i.e., video does not display).

While HDMI, DisplayPort, and Mini DisplayPort each can transmit both audio and video using a single cable, DVI-D can transmit only video and requires separate input/output ports and cables for audio. For this reason, when converting between the DVI-D and HDMI, DisplayPort or Mini DisplayPort standards, only video can be transmitted over a single cable. (Some products can transmit audio from the DVI side via a conversion adapter.)

Now a standard interface for devices (primarily televisions and recorders), HDMI was established in December 2002 by Sony, Toshiba, Thomson Multimedia, Panasonic (formerly Matsushita), Hitachi, and Philips, led by Silicon Image. HDMI video signals are based on the DVI-D standard, a digital RGB interface used in PCs, to which audio transmission and digital rights management (DRM) functions were added. HDMI was intended mainly for use as a digital video and audio interface for home electronics and AV equipment.

An HDMI (type-A) female connector (photo at left) and male connector (center photo). The compact HDMI cable is easily connected and disconnected, just like a USB cable (photo at right). HDMI cables come in two types: Standard (category 1), denoting those that have passed 74.25 MHz in transmission-speed tests, and High Speed (category 2), denoting those certified for 340 MHz. A High Speed cable is recommended when using high-definition signals such as 1440p.

In discussions about HDMI, the subject of functional differences between versions of the HDMI standard is unavoidable. The table below summarizes the major differences. There are significant differences in functions implemented between HDMI versions through version 1.2a and HDMI versions 1.3 and above.

Incidentally, while HDMI 1.3 incorporates standards such as the wide color-gamut standard xvYCC and Deep Color, which can handle color data at greater than 24 bits, these specifications are elective. A version number such as 1.3 is merely the number of the applicable technical specifications; manufacturers can choose what functions to include, depending on the specific product. For this reason, even a product advertised as HDMI 1.3a compliant may not feature all of the functions supported by HDMI 1.3a.

Formally approved in May 2006, the DisplayPort standard is a new standard released in May 2005 by the Video Electronics Standards Association (VESA) of the United States, an industry organization that establishes standards for PC-related interfaces. As a video interface promoted by VESA, a constituency composed mainly of PC and monitor makers, it is designed to succeed the DVI and D-Sub standards as a PC interface. However, there"s no reason it can"t also be used in AV equipment.

Since DisplayPort is a serial interface like PCI Express that generates a clock from the data instead of using external clock signals, data transmission speeds and functionality are easily improved. In addition, since DisplayPort employs a configuration wherein the LCD monitor is operated directly, it makes it possible to reduce the numbers of components. Another benefit is its ability to transmit signals over distances of up to 15 meters.

In the DisplayPort standard, the output side is defined as the source device and the input side as the sync device. Under this configuration, the source and sync devices communicate with each other, making it possible to automatically adjust transmission to the optimal resolution, color depth, and refresh rate. Audio and video data can be transmitted through a combination of single, double, or quadruple channels called lanes, and two data rates (1.62 Gbps and 2.7 Gbps). The minimum configuration is a single lane at 1.62 Gbps; the maximum is four lanes at 2.7 Gbps each for a total of 10.8 Gbps.

The audio formats supported and other attributes are important elements of sync devices. For audio, compatibility with 16-bit linear PCM (32/44.1/48 kHz) is required. Other formats are optional. Still, the standard is compatible with formats up to high-definition audio such as Dolby TrueHD and DTS HD. For color information, compatibility with RGB, YCbCr (4:2:2), and YCbCr (4:4:4) is a requirement.

DisplayPort requires no licensing fees other than that for HDCP, making it more attractive and easier for manufacturers to adopt. Progress in mass production will likely lead to price advantages for ordinary users as well. Still, HDMI is clearly the current mainstream digital interface for products like AV equipment and videogame consoles. DisplayPort, even if standardized under the leadership of PC makers, is unlikely to take its place. With growing support for DisplayPort among vendors of graphics chips for use in PC environments and growing numbers of compatible products, including the MacBook, use of DisplayPort is projected to expand.

Let"s discuss video input interfaces, starting with the D-Terminal and component video standards. The video signals themselves are identical for both of these. The video signal is composed of the following three signal types: the Y brightness/synchronization signal; the Pb (Cb) signal for the difference between blue and Y; and the Pr (Cr) signal carrying the difference between red and Y. Altogether, these are referred to as a component video signal. A characteristic of this technology is its ability to input and output high-quality analog video signals by omitting the process of video-signal separation and combination.

While component video ports offer higher quality and greater benefits than most other types of analog video input, they also entail inconveniences, including more troublesome connections (since they use three connectors) and greater space requirements on devices equipped with such ports. Additionally, they are incapable of transmitting control signals. In Japan, the D-Terminal standard, formulated by the Japan Electronics and Information Technology Industries Association (JEITA, known at the time as the Electronic Industry Association of Japan, or EIAJ), which features its own improvements on these points, has entered widespread use.

A D-Terminal connector combines the three types of component video signals into a single cable and is easier to connect. It also embeds a control signal to identify scanning lines, scanning method, and aspect ratio. (In passing, it"s called a D-Terminal only because its connector is shaped like the letter "D"; the "D" does not mean "digital." Signals flowing through the D-Terminal and the connecting cable are analog.) The table below gives the types of D-Terminals (D1 – 5) and corresponding video formats. While many products feature D5 terminals, which are compatible with 1080p video, this is not specified in the official JEITA standard.

Comparisons of picture quality between component video and D-Terminal standards show that component video, with its three separate connectors, offers higher picture quality, due to structural characteristics of the cable and connector. Many believe this difference becomes even more marked with longer cables.

S-Video and composite ports are capable of handling video up to standard-definition NTSC (480i). They are likely to be phased out gradually in the future, except for applications requiring the connection of older video equipment such as VHS video decks or DV cameras.

Most such products are adapters, which connect to the PC using USB and feature DVI-D or DVI-I connectors on the output side. These are then connected to LCD monitors. After the user installs a device driver, the PC recognizes the adapter as a monitor adapter. Users can create a multi-monitor environment in Windows by activating the secondary monitor connected to the adapter in Display Properties. In terms of display performance, these adapters are not well suited to uses that require high-speed response; they are associated with slight delays in reflecting mouse or keyboard operations.

A small number of LCD monitors on the market use USB as a video input interface, making it possible to output and display a PC screen through a USB connection between the PC and the LCD display. These, too, are ideal for laptops and netbooks, since they allow users to use laptops connected to large-screen LCD monitors at their office desks or at home, then use the laptops for mobile use when out and about simply by unplugging a single USB cable.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.

So, what are the types of monitors? There are basically 6 types of monitors currently being sold by major manufacturers. They include LCD Monitor, LED Monitor, OLED Monitor, Plasma Monitor, CRT Monitor, and Touch Screen Monitors.

As technology advanced, displays became less bulky and gained newer features, while resolutions increased. The CRT lasted all the way up until 1992 and since then we have seen a variety of monitors and display types such as Plasma monitors which lasted until 2014, and LCD and LED monitors take over as technology advanced.

An LCD monitor is a flat-panel display that uses liquid crystal technology to produce images. The image quality depends on the quality of the screen (the clarity) and not the size of the screen like with older CRT monitors.

Generally, LCD monitors offer crisp images and good contrast than their previous counterparts. These types of monitors are not as thin and lightweight as IPS monitors, but are also energy-efficient.

LCDs can offer higher resolution than other display technologies, including those that use cathode ray tubes (CRTs). The average price of LCD monitors ranges from $100 to $250. Top LCD monitors include monitors from LG, Samsung, and Boe.

An LCD monitor with flat-screen technology takes up less space with its slim design and it is more lightweight than normal CRT monitors. It does not require additional desktop space because the screen of the monitor is slim.

IPS panels are now widely used in the manufacture of LCD monitors, due to their high-quality images, fast response times, and wide viewing angles. IPS panels are preferred over TN displays by web designers who require accurate color reproduction and good image quality for their work.

When compared to other LCD panel technologies such as inPlane Switching (IPS) and Vertical Alignment (VA), the twisted Nematic (TN) LCD panel technology delivers a higher faster response time making it the best panel type for monitors for games like League of Legends.

Vertical alignment (VA) panels are LCD technology that has many advantages over the existing TN displays. They are known for their high brightness, high contrast ratio, and ability to be viewed at many different angles.

An LED monitor is an advanced type of flat panel display that uses Light-Emitting Diodes for illumination. Compared to standard LCDs, an LED panel display is thinner and utilizes less power than LCD monitors. The benefits of LED monitors are also fully explained here.

Just like the name suggests, an organic light-emitting diode (OLED) monitor is a type of flat panel display that produces its own light. OLED monitors gives you several advantages over traditional LCD monitors, including thinner panels and the use of less energy

Due to the fact it doesn"t produce any toxic waste products during use, OLED is also friendlier on the environment than an LCD or plasma display. QLED monitors (see QLED vs IPS review) though have tried to replicate the best picture quality features of OLED along with far superior brightness and colours..

Plasma monitors have exceptional brightness and color power. Millions of red, green, and blue cells light your screen with light so pure and bright, making them brighter than CRT monitors and LCD monitors.

The cons of using a plasma monitor are that it is susceptible to burn-in due to the use of a phosphor screen. It also has a shorter lifespan because the gas wears out eventually and this reduces its brightness. The average price for plasma displays ranges from $50 for a 19-inch display to $500 for a 50 inch.

Various monitor brands that make plasma displays include Panasonic, Toshiba, and LG. Some monitor brands such as Samsung and LG have ceased making these types of monitors since they have been replaced by better technologies, such as LCD, LED, and OLED monitors.

CRT monitors have been around since the late 1940s and were commonly used until the second decade of the 21st century. Now they are being replaced by newer technology monitors such as LCD or plasma screens, which offer clearer images and more flexibility in viewing angles.

Business monitors; Business monitors are workstation-optimized, full-featured displays that meet the needs of your business from the desktop to the boardroom.

Ultrawide Monitors; these are super large monitors. They are an excellent choice for multitasking, with two or even three times the screen real estate of a standard monitor. Stay organized with multiple columns or spreadsheets or give your games an immersive feel with an ultra-wide computer monitor.

As technology advances, new devices emerge every now and then. Computer monitors are no different. LCDs replaced CRT monitors and plasma monitors, and then came along LED monitors.

LCD monitors are flat-panel monitors that use liquid crystal display technology to create the image displayed. These flat panels have replaced the bulky cathode ray tube monitors previously in use in most computer workstations.

This means that an LCD monitor like this by AOC is more portable, which makes it easier to transport from one location to another - see how they compare to other portable monitors such as this one from Asus or this one from Lenovo.

One of the biggest advantages of this type of PC display is probably their crystal-clear picture quality. An LCD monitor has a higher resolution and a sharper, crisper image than a CRT, and has far less glare than the latter.

One disadvantage with LCD monitors is that they are a bit expensive than other types of monitors such as plasma but are totally worth it because of their superior features.

This monochrome is made up of two words Mono (Single) and Chrome (Color), hence it is called Single Color Display and it displays the monitor’s output in Black & White colors.

These Gray-scale display monitors are similar to monochrome but it displays in gray shades. These types of computer monitors are mostly used in portable and hand computers such as laptops.

Color monitor displays the output with the adjustment of RGB (Red-Green-Blue) radiations. The theory of such monitors is capable of displaying graphics in high-resolution it can be 4k.

The best monitor types are LCDs. With LCD computer displays, you have high-quality screens, which offer HD or higher resolution like QHD technology. They are thin and flat, have a high refresh rate, and wider color gamut unlike other types of monitors such as CRTs.

The most affordable monitor types will not be plasma or LCDs. It is actually CRTs or Cathode Ray Tubes. You can purchase one for approximately $30-$50. The price will depend on the size of the screen, and you can purchase a 19-inch screen for $30 -$50. They are available in sizes ranging from 13 inches to 24 inch monitors.

LCD monitors are. Along with LED, LCD is the most common type of monitor you will find available currently. LCD monitors consist of two panes of glass with liquid in between and thousands of rows of pixels to organize said liquid.