tft lcd color monitor wiring diagram pricelist

General Specification NMLCD-43480272-CTP-CLB-IPS is a 4.3 inch IPS type TFT LCD with Capacitive Touch and Cover Lens Bezel, with 480*272 resolution. The touch panel is driven by FT5446. This product accords with RoHS. Product Pictures...

General Specification NMLCD-43480272-CTP-IPS is a 4.3 inch IPS type TFT LCD with a Capacitive Touch Panel which is 1:1 scale with the LCD module, with 480*272 resolution. This product accords with RoHS. Product Pictures 4.3 inch 480*272...

General Specification Product Pictures 4.3 inch TFT LCD with 540*960 High Resolution 4.3 inch High Resolution TFT LCD with Portrait Mode and MIPI Interface

General Specification NMLCD-43800480-IPS-850 is a TFT LCD with all view angle with high brightness. It is composed of a colour TFT-LCD panel, driver IC, FPC and a back light unit and with/without a Resistive/Capacitive Touch Panel (RTP...

General Specification This type is a 4.3"" 480*272 full view angle TFT LCD with a Capacaitive Touch Panel with full bonding. Product Picture 4.3"" TFT LCD with Capacitive Touch Panel with Full Bonding 4.3""...

General Specification The NMLCD-43M15 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. It is composed of a TFT LCD panel, a timing controller,...

General Specification NMLCD-43480272-RTP-IPS is a 4.3 inch IPS type TFT LCD with a Resistive Touch, with 480*272 resolution. This product accords with RoHS. Product Pictures 4.3 inch IPS Type TFT LCD with 480*272 Resolution with...

Text: panel type 8.4- inch TFT color LCD monitor , the IV-08MP, realizes power saving, automation and cost , series controller can be directly connected to the backside of the IV-08MP monitor and used as one unit , Monitor cable* (Cable length: 2m) Backside of equipment * Monitor cable IV-S50MC2 is sold , Monitor input connector This connector is connected to the monitor output connector of the controller , ) of the mounting surface (thickness: max. 7 mm) to fit the 0 0 IV-08MP into the surface. (When

Abstract: omron plc to ns screen cables pin diagram V520-RH21-6 basic plc ladder diagram XW2Z-200S-CV CJ1W-CIF11 NSJ5-SQ10B-M3D at enhance v520 CJ1W-IC101 XW2Z-200S-V

Text: reduced,addedthe NSJcontrol panel. on later. Wiring and and can ·The number of design steps can be , Ivory 5.7- inch color TFT LCD No Black Ivory 117.2 × 88.4 mm (W × H) Ivory (5.7 inches , Kwords) EM: None 0.04 µs 1 5.7- inch color High256 KB luminance Ivory TFT LCD (See note 2.) Black 320 × 240 (QVGA) No Yes Ivory 8.4- inch color TFT LCD Yes 170.9 × 128.2 , . Now, even the 5.7- inch class models have 60 MB of screen data capacity as a standard feature and also

Text: 5.7- inch STN 320 u 240 dots Yes No 5.7- inch TFT Yes No NS8-V2 8.4- inch TFT 640 u 480 dots Yes No NS10-V2 10.4- inch TFT 640 u 480 dots Yes No NS12-V2 12.1- inch TFT 800 u 600 dots Yes Number of dots , explanation of the cause of the error as well as the countermeasures x Ladder Monitor come as a Standard , the configuration, wiring , and other conditions of the equipment or control panel in which the PLC is , 256 colors NS5-V2 5.7- inch Color STN 5.7- inch Color TFT Text attributes Functional objects

Abstract: omron -ns5-sq10b-v2 PLC Communication cables pin diagram omron NT Example SIMATIC S7 Programming PID function block NS12-TS01-V2 omron CPM1-CIF01 rs 232 manual NS5-SQ omron plc CJ1M CPU 13 troubleshooting NS8-TV00B-V2 NS15-TX01B-V2

Text: . P12 Greatly Improved Ladder Monitor . Enhanced Visibility and Ease of Use , Link Ladder Monitor NS5-MQ Monochrome STN NS8-TV Color TFT NS12-TS Color TFT , the PT. NS system version 8.2 or higher is required. Specifications 7 Previously, all of the , number of pixels is 1.6 times greater than the NS12. With the Ladder Monitor , ladder diagrams can be , Visibility and Ease of Use. e d Featur Standare note.) (Se Note: Not supported for the 5.7- inch model

Text: ) 764-0839 www.redlion.net GTM - GRAPHICAL TANK MONITOR ! MONITORS THE LEVEL AND TEMPERATURE OF , fuse terminal) Type: 1/4 x 1 1/4 inch (6.3 x 32 mm) slow-blow, glass 2. DISPLAY: 10.4" TFT resistive , The GTM - Graphical Tank Monitor is a ready to use system for tank monitoring, complete with level , either by keying in the current signal, or through the use of its built in learn mode. For nonlinear , Crimson software package. The GTM also accepts two, or three-wire, 100 Ohm platinum RTDs to monitor tank

Abstract: cable diagram mitsubishi plc FX2N SERIES A2SH ge fanuc cpu 331 PLC Communication cables pin diagram fanuc 90-30 Allen Bradley PLC micrologix 1200 wiring diagram PLC to pc Communication cables pin diagram siemens Allen Bradley PLC micrologix 1000 Allen Bradley Micrologix 1500 315-2DP

Text: interface eliminates costly investments in wiring and installation of multiple pushbutton indicators on the , touchscreen to monitor and control PLCs in different locations. Depending on PLC type, a maximum of 31 PLCs , 171CCC96020 N/A = Cable not available at this time. Wiring diagram available at www.idec.com/usa/smarttouch , HG9Z-3C145A N/A N/A = Cable not available at this time. Wiring diagram available in WindO/I-nv2 , time. Wiring diagram available in WindO/I-nv2 manual. Visit www.idec.com/manuals. Download Host

Abstract: PC MOTHERBOARD repair MANUAL fault find ups circuit diagram PC MOTHERBOARD SERVICE MANUAL free home ups wiring diagram wiring diagram of ups home ups circuit diagram Wiring DIAGRAM OF 7 INCH TFT MONITOR 500 UPS diagrams free circuit diagram of hard disk

Text: Wiring diagram Wiring according to the wiring diagram (the circuit of PC_ON and PowerStatus is , Fitting the cable Wiring in accordance with wiring diagram Fit the cables for the power supply of the , connector Wiring diagram Fitting the cable Material for assembling the connectors Assembling the , 7 Product Description Interfaces Interfaces of the Built-in Panel PC CP63xx 1 3 4 7 5 2 6 Serial interfaces RS 232 COM1 - COM2 The basic version of the CP63XX Industrial PC

Text: INCREASE MEMORY CAPACITY  10.4- INCH TFT 32K VGA 640X480 PIXEL LCD OR SVGA 800X600 LCD  OUTDOOR UNIT , " TFT VGA Display Operator Interface (indoor), USB Host, Isolated Comms CAUTION: Risk of electric , SIZE 10.4- inch 10.4- inch 10.4- inch TYPE TFT TFT TFT COLORS 32K 32K 32K PIXELS 640 X 480 , standard DH485 cable to connect this port to Allen Bradley equipment. A cable and wiring diagram are , core with integrated functionality. This core allows the G310 to perform many of the normal features

Text: current monitor ITH Outputs short circuit protected to GND and VBatt Diagnosis: - Wiring : short circuit to GND ,short circuit to VBATT or Open load - Ignition coil: assessment of current relating to , time or flag time of channel i and i+3 (bit value x 8µs) DIAGCHx: 2 bits wiring and 2 bits BDI , - / functional diagram Ignition Driver with Diagnosis Customer benefits: Excellent system know-how Smart concepts for system safety Secured supply Long- term availability of manufacturing processes and

Abstract: TFT LCD timing controller T-con car rear camera P-TQFP-64-1 full hd tcon with lvds input LCD monitor TCON LCD TCON TCON color QVGA GRAPHICS LCD DISPLAY TCON

Text: linearity between input and output image data. Since the characteristics of TFT LCDs vary from monitor to monitor , the brightness and color hue of an input image can also vary. Gamma correction is used to , to the timing of various TFT LCDs. This function enables compatibility with a wide range of TFT LCDs , passengers seated in the rear seats of a vehicle. Note 7 : Vehicle-mounted camera system Onboard analog , wiring patterns making up a balanced cable or on a printed circuit board (PCB). * Names of companies

Abstract: ZR-RX40A-E ZR-RX40 DATASHEET PT1000 omron temperature sensor pt100 ZR-XRT1 ZRRX40 multi channel voltage measurement with lcd display pt100 usb transistor ZR

Text: AC adapter. Easy-to-see 5.7 inch color TFT LCD. Comes with bright, easy-to-see, high-intensity 5.7 inch TFT large-scale color LCD panel. Its wide field of vision means it can even be seen at an , drive Internal 12 MB flash-memory 5.7 inch TFT color LCD Easy-to-navigate menus 9 hour battery , Internal 3.5MB flash memory 3.5 inch TFT color LCD Easy-to-navigate menus 6 hour battery (option) M3 , 200 channels All channels isolated Thermocouples 12MB internal memory 5.7 inch TFT LCD

Abstract: wiring diagram of ups PC MOTHERBOARD SERVICE MANUAL free home ups wiring diagram home ups circuit diagram C9900 CP7130 fault find ups circuit diagram PC MOTHERBOARD repair MANUAL free circuit diagram of hard disk

Text: according to the wiring diagram (the circuit of PC_ON and PowerStatus is symbolical): Wiring diagram , connector Connecting Power Supply Cable Cross Sections PC_ON, Power-Status Wiring diagram , Instructions Fitting the cable Wiring in accordance with wiring diagram Fit the cables for the power , power-switch in accordance with the wiring diagram , using the included material for assembling the connectors , stripped cable ends into the opening of the terminal of the 7 -pole connector in accordance with the

Text: 8.4- INCH TFT 32K VGA 640X480 PIXEL LCD 7 -BUTTON KEYPAD FOR ON-SCREEN MENUS THREE FRONT PANEL LEDS , TFT 32K 640 X 480 450 cd/m2 CCFL 50,000 HR TYP. G308C1 7.5- inch TFT 32K 640 X 480 112 , Bradley equipment. A cable and wiring diagram are available from Red Lion. G3 to AB SLC 500 (CBLAB003, GENERAL DESCRIPTION CONTENTS OF PACKAGE The G308 Operator Interface Terminal combines unique , performance core with integrated functionality. This core allows the G308 to perform many of the normal

Abstract: Wiring Diagram s7-300 siemens Wiring Diagram s7-200 siemens FATEK PLC Communication cables pin diagram s7-200 cpu 216-2 PLC Communication cables pin diagram fanuc 90-30 Keyence PLC KV 40 R omron sysmac c20 C40H OMRON Operation Manual sysmac c28h

Text: 4. Names of Components 5. Dimensions and Panel Cut-out 6. Mounting Procedure 7 . Wiring 8 , installed within the angle of 0 to 135 degrees as shown below. Display 0° 1 Wiring 7 1 - 17 , . Connection of a wrong power source may cause a fire. · Wiring should be done by qualified electrician , already programmed panel data. You can select the size of panel such as 5.7 inch display, 7.7 inch , -43EM(for ZM-43) for backup of an internal memory. 9) Ladder monitor ability is carried A ladder figure

Text: helpful in the installation, wiring and inspection of Delta HMI. Before using the product, please read , comply with the electrical standard of the country. Do not modify or remove wiring when power is applied , the information of HMI software operation, software installation and hardware wiring , please refer to , Definition of Serial Communication COM1 Port [A, AE and AS57B(C)STD Series] COM Port PIN 1 2 3 4 5 6 7 8 9 , : Please refer to pin definition of actual model for detailed pin assignments. English- 7 Dimensions

Abstract: GT10-C30R4-8P pin configuration FX-232CAB-1 gt01-c30r4-8p mitsubishi rs232 sc09 programming cable GT10-C30R4-8P Allen Bradley PLC Communication cable pin diagram mitsubishi fx plc programming cable pin wiring diagram gt01-c10r4-8p GT10-C30R2-6P cable diagram

Text: height (mm) Freeely defined display Touch Screen Active area of display W x H (mm) / diagonal ( inch , Active area of display W x H (mm) / diagonal ( inch ) Keyboard Function keys Memory for application , test individual parts of the plant. The PLC programs can be monitored graphically (ladder diagram ). , Function card to use additional functionality of GT1500 HMIs and System Q/QnA/A/FX monitor £116.00 , range of E1000 Series & NEW GOT1000 series Portable PCs & Software This document contains list

Text: Monitor input and output contact states. Power-on time ≠Equipment operating time Number of ON , applications 2 3 Compact design Incorporates the functionality and performance of a modular PLC in an outstanding compact format 1 Traceability FP7: Seven steps to higher efficiency 7 5 Traces the values of variables over a certain time frame during program execution 4 , Advanced motion control (cam & gear) Offers a variety of control options, from simple position control

Abstract: c9900-e169 schematic diagram on line UPS WELL outside plant access cabinet home ups wiring diagram schematic diagram UPS PC MOTHERBOARD SERVICE MANUAL ups circuit schematic diagram repair C9900 C9900-K292

Text: (the circuit of PC_ON and PowerStatus is symbolical): Wiring diagram power supply and external wiring , down the PC PC_ON and Power Status functions Wiring diagram Connecting the Network Pre-assembled , . The picture shows the earthing connection in the wiring area of the PC (see arrow). The earthing , diagram of power supply unit wirings Innovative solution for shutting down Industrial PCs , . CP72xx 13 Installation Instructions Connecting Power Supply The external wiring consists of

Abstract: NL2432HC17-07B NL8048HL11-01B NL2432HC22-41B 7 inch TFT LCD WVGA NL9654HL06-01J NL2432HC22 NL2432HC22-40A nec display nl4864HL11-02a NL8048HL11-01A

Text: applications and applied their knowledge of the market requirements to the design of small-sized TFT LCD modules. NEC offers a variety of small-size amorphous silicon (a-Si) TFT LCD products as well as , the peripheral wiring of the glass substrate and in the number of connections with external circuits. This results in pixel density that is four times higher than that of conventional 3.5- inch quarter VGA , NL2432HC17-04A 2.7- inch Part Number NL2432HC17-10B Out of concern for the environment, NEC LCD

Text: ® SOCKET FOR DATABASE/RECIPE STORAGE AND DATA LOGGING 15- INCH TFT ACTIVE MATRIX 32K COLOR XGA 1024 X 768 , N-m) 13. WEIGHT: 11.41 lbs (5.17 Kg) 15- inch TFT 32K 1024 X 768 600 cd/m2 50,000 HR TYP , Allen Bradley equipment. A cable and wiring diagram are available from Red Lion. Connections G3 , TFT XGA DISPLAY AND TOUCHSCREEN          C UL , POWERED BY 24 VDC ±20% SUPPLY RESISTIVE ANALOG TOUCHSCREEN CONTENTS OF PACKAGE The G315C Operator

Text: . . 1 2.2 Simultaneous drive of CRT monitor and flatpanel , . . 7 6.3 B/W- / Plasma-Displays / Mono TFT . , WD90C24. 2.2 Simultaneous drive of CRT monitor and flatpanel The Dotcard-Speedcolor only supports a , TFT displays This 24 pin male header with a pitch of 2.54 mm is designed for the connection of 9 , potentiometer Pin grouping 4.8 J3: J4: Wiring proposal Adjustment of the +V0 voltage Pin

Abstract: Connector 30pin lcd 9 watt cfl circuit diagram ITSX95 cfl circuit diagram of 12 volts Connector 30pin lcd jae lcd screen LVDS connector 30 pins lcd screen LVDS connector 40 pins JAE FI-xb30s-hf10 Vsync

Text: following diagram shows the functional block of this Type 15.0 Color TFT /LCD Module. The first LVDS port , Inverter. To update Power Consumption. To update Reference Drawing as of September 1,2000. 1,5,6, 7 6 , is used in this module, take care of static electricity and insure human earth when handling. 7 ) Do , at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged. 11) At , Interface Connector of the TFT Module. 12) After installation of the TFT Module into an enclosure

Text: Long Logger System SI Onboard Long Logger System FEATURES • 1% of net payload • Easy to , set-alarm points • Supervisor lock-out • Color TFT graphic display with LED backlight • Optional , cells for the truck and trailer. The easy-to-install and operate system consists of load cells and , transmitters, and all the necessary wiring . APPLICATIONS • Forestry/logging • Bulk hauling • Aggregate SYSTEM BLOCK DIAGRAM Document Number: 11948 Revision: 03-May-12 Technical contact in

Abstract: schema monitor crt 3,3V Spannungsregler fotowiderstand lcd backlight inverter schema schema Lcd monitor schema inverter connettore d-sub circuito stampato lcd panel schema vga pcb D-sub connector

Text: setting for deliver of graphic boards to use with TFT displays. 4. DIP Switch settings With the DIP , and the PCB. 6. Pin out of the connector X9 and X5 (table 1) Pin # 1 2 3 4 5 6 7 8 9 10 , 22 24 5 3 1 9 28 40;42 44 2;4;6;8;14;14;20;26 7 Pin out of connector X7 and X8 (table 2 , ) Monitor (VGA) Stift Nr. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 X9 Rot Grün Blau Nicht , Issued / Herausgegeben / Publicatto V10816 09/00 Digital PCI Bus Interface Card for TFT

Abstract: 6 pins socket mini -din mouse connector Floppy connector 34 pin IDC 8255 connect with led 6 pin MINI DIN VGA pinout 486SX-25 8255 keyboard interfacing interfacing floppy disk drive with microcontroller 386SX GRAPHICAL LCD INTERFACING DIAGRAM

Text: product to make the connection between the module and your monitor . The details of the cable are as , drive CRT displays. Please insure that you follow the follow the above wiring diagram carefully , developed to serve most markets quickly. The limitations of such solutions are well documented but include the difficulty of expansion, limited performance and the frustrations of simulations running , . Despite these hurdles micro-controllers dominated the development labs as the majority of products only

In this Arduino touch screen tutorial we will learn how to use TFT LCD Touch Screen with Arduino. You can watch the following video or read the written tutorial below.

The next example is controlling an RGB LED using these three RGB sliders. For example if we start to slide the blue slider, the LED will light up in blue and increase the light as we would go to the maximum value. So the sliders can move from 0 to 255 and with their combination we can set any color to the RGB LED,  but just keep in mind that the LED cannot represent the colors that much accurate.

As an example I am using a 3.2” TFT Touch Screen in a combination with a TFT LCD Arduino Mega Shield. We need a shield because the TFT Touch screen works at 3.3V and the Arduino Mega outputs are 5 V. For the first example I have the HC-SR04 ultrasonic sensor, then for the second example an RGB LED with three resistors and a push button for the game example. Also I had to make a custom made pin header like this, by soldering pin headers and bend on of them so I could insert them in between the Arduino Board and the TFT Shield.

Here’s the circuit schematic. We will use the GND pin, the digital pins from 8 to 13, as well as the pin number 14. As the 5V pins are already used by the TFT Screen I will use the pin number 13 as VCC, by setting it right away high in the setup section of code.

I will use the UTFT and URTouch libraries made by Henning Karlsen. Here I would like to say thanks to him for the incredible work he has done. The libraries enable really easy use of the TFT Screens, and they work with many different TFT screens sizes, shields and controllers. You can download these libraries from his website, RinkyDinkElectronics.com and also find a lot of demo examples and detailed documentation of how to use them.

After we include the libraries we need to create UTFT and URTouch objects. The parameters of these objects depends on the model of the TFT Screen and Shield and these details can be also found in the documentation of the libraries.

So now I will explain how we can make the home screen of the program. With the setBackColor() function we need to set the background color of the text, black one in our case. Then we need to set the color to white, set the big font and using the print() function, we will print the string “Arduino TFT Tutorial” at the center of the screen and 10 pixels  down the Y – Axis of the screen. Next we will set the color to red and draw the red line below the text. After that we need to set the color back to white, and print the two other strings, “by HowToMechatronics.com” using the small font and “Select Example” using the big font.

Next is the distance sensor button. First we need to set the color and then using the fillRoundRect() function we will draw the rounded rectangle. Then we will set the color back to white and using the drawRoundRect() function we will draw another rounded rectangle on top of the previous one, but this one will be without a fill so the overall appearance of the button looks like it has a frame. On top of the button we will print the text using the big font and the same background color as the fill of the button. The same procedure goes for the two other buttons.

Here’s that function which uses the ultrasonic sensor to calculate the distance and print the values with SevenSegNum font in green color, either in centimeters or inches. If you need more details how the ultrasonic sensor works you can check my particular tutorialfor that. Back in the loop section we can see what happens when we press the select unit buttons as well as the back button.

Ok next is the RGB LED Control example. If we press the second button, the drawLedControl() custom function will be called only once for drawing the graphic of that example and the setLedColor() custom function will be repeatedly called. In this function we use the touch screen to set the values of the 3 sliders from 0 to 255. With the if statements we confine the area of each slider and get the X value of the slider. So the values of the X coordinate of each slider are from 38 to 310 pixels and we need to map these values into values from 0 to 255 which will be used as a PWM signal for lighting up the LED. If you need more details how the RGB LED works you can check my particular tutorialfor that. The rest of the code in this custom function is for drawing the sliders. Back in the loop section we only have the back button which also turns off the LED when pressed.

Investing in home security is a vital investment, getting the cameras is one thing another significant investment will be having the Best CCTV monitor to compliment your camera system.

The Eyoyo K1223 model is a portable 11.6 inch monitor with a high resolution of 1366 x 768. You will experience a bright and sharp image from a wide viewing angle of about 160 degrees horizontally and 140 degrees vertically.

The Aspect ratio of 16:9, a brightness level of 350 cd/ m2 and a contrast ratio of 600:1. You will experience more accurate color presentation when it comes to interconnectivity with other devices such as PCs, TV, camera and DVD players or writers...

To interface TFT LCD Display with Arduino, for designing custom HMI TFT LCD Display provide rich colours, detailed images, and bright graphics with their full-colour RGB mode it comes in different pixels 128 x 160 pixels, 320×240 pixels and many more.

In this tutorial, we’ll interface the 1.8 TFT LCD display with Arduino Uno. You’ll learn how to interface the TFT LCD with Arduino to write text on this LCD. This tutorial presents the coding, wiring diagram and components list required for the LCD display.

Creating an interface between the user and the system is very important. This interface can be created by displaying useful data, and menus. There are several components to achieving this. LEDs, 7-segments, OLEDs, and full-color TFT LCDs. The right component for your projects depends on the amount of data to be displayed, and the type of user interaction.

TFT LCD is a variant of a liquid-crystal display (LCD) that uses thin-film-transistor (TFT) technology to improve image qualities such as addressability and contrast. In the case of Arduino, the processor frequency is low. So it is not possible to display complex and high-speed motions. Therefore, full-colour TFT LCDs can only be used to display simple data and commands. This TFT has 128 x 160 pixels. 1.8 TFT display can load images from an SD card. It has an SD card slot at the back. You can see the front and back views of the TFT LCD in the figures below.

TFT is an abbreviation of “Thin Film Transistor”. It has transistors made up of thin films of Amorphous silicon. It serves as a control valve to provide an appropriate voltage onto liquid crystals for individual sub-pixels. The working principle is very simple the TFT LCD composes of many pixels that can emit light of any colour. The desired image achieves by controlling each pixel to display the corresponding colour. In TFT LCD, the backlight technology is generally used. In order to accurately control the colour and brightness of each pixel, it is necessary to install a shutter-like switch after each pixel. When the “blinds” are opened, light can pass through them. When the shutters are closed, light cannot pass through them.

This is the section before setup which uses for globe variables defining and libraries additions. TFT.h is the library for TFT LCD Display and uses for writing and drawing on the display. The TFT display communicates with the Arduino via SPI communication, so you need to include the SPI library.

This is the setup section in which Serial.begin(9600) initialize. TFTscreen.begin() is use to initialize the library. TFTscreen.background(0, 0, 0) is use to customize the screen background color here TFTscreen.background(0, 0, 0) means the background colour is black. TFTscreen.setTextSize(2) is use to set the font size.

In the loop section first, we will print the “Hi_peppe8o!” in the centre of the LCD and this will be in three different colours (Red, Green, Blue) you can choose any colour using the different colour codes. After 300 milliseconds a straight line will be displayed, after 300 milliseconds a square will be displayed, after 300 milliseconds a circle will be displayed, and after 300 milliseconds screen will be black/ erase and these all shapes and the text will be repeated in the void loop.

The LCD displays the text of “Hi_peppe80” and after that displays the line, square, and circle and then erases everything after completing this sequence. The command used for clearing all the data is TFTscreen.background(0,0,0):

This ST7735S 1.8" TFT Display features a resolution of 128×160 and SPI (4-wire) communication. Integrated with an SD card slot, it allows you to easily read full-color bitmaps from the SD card.

The module provides users with two wiring methods: pin header wiring and GDI (General Display interface). You can directly connect the display to a FireBeetle main controller using an FPC cable. Plug and play, easy to wire. Besides, the display supports a low refresh rate and offers a good display effect and strong versatility.