what should be used to clean lcd monitors for sale

We’ve all lived that moment when our computer monitor is met with the perfect stream of daylight, and the thought crosses your mind as you squint to see through the scattered fingerprints and dust: “Whoa, when was the last time I cleaned this thing?”

There are a few different types of screens, and your cleaning options vary between the surfaces. It’s critical to know how to clean your specific screen because, if you do it wrong, the active ingredients in the cleaning agents could affect the display of sensitive crystals or cause permanent damage in the form of streaks and scratches.

It doesn"t hurt to wipe down the surface of your keys and your mouse at the same time you"re cleaning your screen, since many germs are housed on those surfaces. Using a dry microfiber cloth is always safest when it comes to removing dust.

Are there different considerations for cleaning a Mac screen versus a PC screen? In short, yes. We know that there are hundreds of different computer and monitor models to consider, but in general, screens are either backlit LED made with LCD (liquid-crystal display) pixels, or a non-LCD glass-coated surface. And just to note, some of the newer matte glass screens are nano-texture glass, which require a special polishing cloth from the manufacturer and should be cleaned with nothing else.

LCD screens are more susceptible to damage by cleaning agents, but because they’re commonly used on PC laptops and standalone computer monitors, there are lots of easy-to-use products available to clean them. It’s not that they’re hard to clean, but you’ll have to be careful and diligent so you don’t damage the surface or any of the LED elements. Any cleaners that include ammonia will leave a film. Soap and water can cause damage. It’s always safest and most effective to use an LCD cleaner free of alcohol, ammonia and acetone to clean an LCD screen, but if you need a DIY fix, you’ll be successful if you use a microfiber cloth that’s sprayed lightly with a mix of vinegar and distilled water.

Most Mac computer screens are glass-coated and can be cleaned and resolved streak-free more easily than LCD products using glass cleaners, like Windex, or a cloth lightly sprayed with rubbing alcohol. Nano-texture glass screens on products like the Apple Pro Display XDR or iMac require use of the special polishing cloth sold by Apple.

For fingerprints and smudges, spray 70% isopropyl alcohol onto a cloth, or use a pre-moistened alcohol wipe or a Clorox Disinfecting Wipe, to clean non-porous surfaces like the screen; do not use bleach.

To clean spots and streaks on the surface of the screen, mist an LCD cleaning spray onto a dust-free side of your microfiber cloth; an easy DIY solution is 1:1 parts of white vinegar and distilled water.

Instructions on how to clean PC monitors aren’t usually available or indicated in the user manual, but it’s an important part of ownership. Keeping your display spic and span not only makes the device look good but also lessens distractions and health issues like dust allergies or even eye strain. We don’t usually touch or move the monitor, so it is highly prone to gathering dust and grime if left unkempt.

Dust is your main enemy with monitors even if they don’t outright damage the device. The problem with dust is it builds up over time, so it can clog a monitor’s air vents or cause a short if they find its way to the internals or ports. It’s also unpleasant to look at a dusty monitor, especially if you use it all the time.

You can get by with a simple wipe-down or even a good cleaning brush, but it usually takes more effort to clear persistent stains. You might even damage the fragile parts like the AG coating if you wipe too hard, so making the process easier has its benefits. Speed can also be the key for emergency cleanups for something like spills if you want to avoid permanent damage.

Here are some important steps you need to take before attempting to clean your PC monitor:Power Down – Turning the monitor off and unplugging it not only makes you and the device safer, but it also makes seeing smudges and fine dust easier. Do this to avoid injury, shorting, and permanent damage to your precious display.

Wipe or Brush it First – Wiping down or using a soft brush is usually enough to get rid of the haze of dust on your screen. You can also do this before applying the liquid cleaners to avoid smudging the dust around or turning them into clumps.

Use Cleaning Fluid After – If there’s still some more gunk like mucus that landed on your monitor after sneezing on it, use the fluids. Never use water since it can wipe out the screen’s coating or damage the electronics. Do not spray the screen with the cleaner directly since it can drip down and get into the gaps between the screen and the bezel.

Wipe Dry with a Clean Cloth – You should wipe down any excess fluid and let the monitor dry before attempting to use it. Using it while it’s still wet is a surefire way to destroy, cause a fire, or get a surprising jolt from the device.

The most basic tools for maintaining your PC monitor are a microfiber towel and any type of brush with fine hairs. However, it wouldn’t hurt to augment it with wipes, a spray, or even a portable blower to get rid of the nastier and more persistent dirt. Thankfully, there are products now which can help you to clean PC monitors and your other peripherals.

The  Screen Mom cleaner kit doesn’t have harmful chemicals so it will safely clean your screen with a like-new appearance. It includes a purple microfiber cloth and over 1500 sprays so it should last quite a while despite being so affordable.

The WHOOSH! Screen Cleaner Kit is another eco-friendly cleaner that is safe enough to use even for eyewear. It comes in several sizes and it includes a soft micro-fiber cloth and a portable bottle so you can take it anywhere with you.

The Gobe Glass Cleaning Kit is the premium and prosumer option since it comes with extras like its blower and the soft-hair brush. It is plant-based and it even comes with a pouch so you can neatly stow it away after use.

The EVEO option is one of the most effective screen cleaners in the market thanks to its unique formula. We like its black microfiber cloth which lasts long, and it lets you easily see if it is already dirty.

The Insignia Screen Cleaner comes from Best Buy which is widely known for electronics. It is quite popular since it gets rid of streaks quickly, plus its cloth can be stowed inside the cover so you won’t lose it.

The Weiman E-Tronic wipes can clean your screen without inducing streaks for that all-new look. It’s safe to use for TVs and monitors, plus it’s pre-moistened so it is ready to go once you pop the tube open.

The OXO Good Grips Sweep and Wipe is a double-sided tool that has a retractable soft brush on one side and a microfiber pad on the other. It’s designed to be used with laptops so it is very portable and very easy to store because of the way it is designed.

The DataVac computer cleaner is an enthusiast favorite since it’s powerful enough to blow out dust from inside your computer. It comes with a host of attachments so it can clean every nook and cranny of your setup with powerful airflow.

The Artist Unknown duster is a smaller, battery-operated compressed air duster that’s designed to sweep out dust from the tightest spots. Its powerful enough to clear dirt from your monitor’s seams and it lasts up to 30 minutes of continuous cleaning on a single charge.

Getting a brush kit like this generic set from Amazon can deepen your cleaning prowess, especially for monitors with tight edges and corners. It comes with a variety of brush sizes and types and long handles so you can reach spots that wipes and microfiber cloths won’t be able to reach.

Don"t make the mistake of thinking that LCD screens work like your nifty new iPad. In general, touching should be off limits because pressing too hard on the screen can actually break or crack pixels. So the first rule to cleaning an LCD screen is don"t do it unless you have to (i.e. unless it"s actually dirty).

Many retailers offer special cleaning solutions for LCD screens, but the truth is that most of these are made up primarily of water. So, if you don"t want to take the time to go buy a cleaner or you want to save the money (maybe to put toward that "What Not to Wear" dress), you can just make your own LCD cleaner by mixing water with some vinegar or isopropyl alcohol -- the solution should be no more than 50/50.

You could even start with plain water and see if you need the vinegar or alcohol, which will come in handy when you"re trying to wipe away greasy fingerprints. Some people recommend only using distilled water, but regular water works fine, according to Dave Chipman from Sharp.

Unless you want to end up with a melted, discolored, hazy or scratched LCD screen, steer clear of all spray cleaners. In particular, don"t use any solvent cleaners that include acetone, ethyl alcohol, ethyl acid, ammonia or methyl chloride. You also want to avoid using any materials that could potentially scratch the screen"s delicate surface. Opt for a soft, clean, cotton cloth instead of wood-based products like paper towels and tissues. Chipman suggests using a microfiber cloth for best results.

If you"re lucky enough to have a service come in and do your cleaning for you, make sure they don"t inadvertently ruin your television or monitor by trying to clean it with something like glass cleaner. You should either take the time to explain -- and maybe even demonstrate -- how you want your LCD screen cleaned or just ask your cleaner to leave this particular job for you.

Keeping your computer clean is a necessary habit. Over time, your computer — especially your monitor — collects dust and debris, not to mention passing germs from sneezing and coughing. While fingerprints are bad enough, the eye strain from a messy monitor is even worse.

Cleaning your monitor is also a bit more involved than a simple wipe-down, and there are certain products you shouldn’t use. In this article, we’re going to talk about the right way to clean your computer monitor.

While it may be tempting to reach for a bottle of Windex or some other general cleaning product, don’t! Harsh chemicals may be fine for windows or countertops, but they can wreak havoc on computer monitors, wearing away coatings. There are many cleaning fluids on the market specifically geared toward computer monitors. While these products indeed work, you don’t need to spend money on them if you don’t want to; distilled water should work for most monitor-cleaning, and you can mix in some white vinegar for stubborn grime.

Additionally, avoid paper towels, rags, old T-shirts, or any of the usual materials you use to wipe down surfaces in your home. Monitors are more delicate than they look, and these fabrics — even paper towels — are abrasive enough to scratch your screen, especially if you have used them for other jobs where they might have accumulated grit. A microfiber cloth — the kind you might use to clean your glasses or vinyl records — is the safest choice. Just make sure it’s free of any dirt or grime before swiping across your display.

Step 1: Turn off your monitor. It’s easier to see smudges and stuff on a black screen, so turning off your monitor makes it easier to see what you are doing. It’s also safer for you and your computer. Cleaning your monitor while it’s on and the pixels are all fired up could damage your screen or potentially give you an unpleasant electrical jolt. Please turn it off!

Step 2: Wipe your monitor with a microfiber cloth. If dust is the only thing on your screen, a quick wiping should be enough to clean it. Take the microfiber cloth and gently brush the screen in long motions. We cannot stress enough that you should be gentle: Pressing too hard on the screen could damage the pixels within.

Step 3: If the thick layer of dust on your monitor has been slowly replaced with more questionable gunk — maybe some dried mucus from a sneeze that caught you off guard or mysterious specs of who-knows-what — then you’ll want to use cleaning fluid.

There are gentle cleaning fluids designed for monitors, but distilled water works well, as mentioned earlier. It’s important you only use filtered or distilled water, however, since tap water contains minerals and other substances that can harm the screen or leave annoying streaks. For especially stubborn grime, add a bit of white vinegar to the water. Just be careful not to spill any on your laptop.

Step 4: It’s important that you never spray water or other cleaning fluids directly onto your monitor, or it might trickle down to the edge of the screen and seep into the monitor itself and damage the electronic components within.

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

From the television to the computer to the tablets, screens and monitors are all around your house. As more and more devices move into the touch-screen mode, you may very well find you’re frequently cleaning TV screens and computer monitors. While you may be quick to grab some paper towels, glass cleaner and start wiping away, stop and ask yourself this: is this the best way to clean this screen? There are many different considerations for cleaning the screens and monitors in your house. Here’s a closer look at what you need to know.

Most of the TVs found in homes today have flat screen monitors and are quite different compared to screens on older models. Cathode Ray Tube (CRT) TVs of the past (like the big 1980s-style sets you may recall) had a thick glass screen that was relatively safe to wipe clean with paper towels and window cleaner. Not so with today’s flat screen models. Much of what’s on the market today has a liquid crystal display, or LCD, monitor that produces images. LCD televisions are also thinner and lighter than CRTs.

The make-up of an LCD monitor or screen, however, features a special type of material that is sensitive to chemicals, such as a glass cleaner. Likewise, a plasma display panel (PDP) is made with small cells that contain electrically charged ionized gases—the plasmas.

One of the most important steps to remember is to turn the device off before you begin cleaning. When the screen is dark it will be easier to see the dirty areas. Keep in mind that using harsh chemicals on these screens could ultimately damage or even ruin the television or computer. And it’s not just the cleaners you need to be aware of; kitchen towels or paper towels could also cause scratches and leave the screens covered in lint.

Knowing and understanding how to clean your screens and monitors can help ensure you’re able to use and enjoy your devices for years to come. Here are a few suggestions for properly cleaning these specialty screens.

Probably one of the most important considerations is to never spray any type of cleaning fluid or even water directly onto the screen. While the old CRT screens were pretty much water-tight, the same can’t be said for today’s modern screens. Screens today are made of layers upon layers of glass, plastics, various display elements, and other materials. When liquid comes in contact with the screen’s edge it can be pulled in, like a capillary, to the layers. Once this happens, you will likely notice something that looks like a blob on your screen, and the liquid will most likely never evaporate without leaving some remaining damage.

You may think that grabbing the bottle of glass cleaner you already have on hand is fine for cleaning screens and monitors. But think again. Using many of these common cleaning products can end up causing serious damage. Ammonia-based cleaners (such as traditional window cleaning spray), for example, could cause a chemical reaction with the coating on the screen or cause clouding. Some electronics stores sell specialty cleaners for use on screens, but you can also make cleaning solutions at home. One option is to combine equal parts of water and vinegar for a homemade cleaning product. But don’t spray anything directly onto the screen. Instead, spray the solution onto a lint-free cloth and gently wipe the surface.

Even if you don"t have snot-nosed kids or wet-nosed pets, your computer monitor or HDTV panel will eventually accumulate a collection of annoying smudges and stains. My household happens to contain both of the aforementioned creatures and, thus, I"ve developed a method for wiping down the HDTV in the living room and the LCD monitor in my office, as well as the screen of my laptop and iPad.

If you take a quick survey of LCD or HDTV manufacturers about the recommended method for cleaning the surface of your monitor or TV screen, you"ll discover more don"ts than dos, often in conflict with one another.

In the don"t column:Don"t use aerosol sprays, solvents, or abrasives. (This means don"t reach for the Windex under the kitchen sink, as tempting as it may be.)

First, attempt to clean your screen with a dry, lint-free cloth. If you can"t find the cleaning cloth that came with your screen in question, then it"s likely you have one laying around from a laptop, iPad, or iPhone purchase.

After removing any dust from your screen with a dry cloth, dip the other cloth in your dish soap solution, wring it out, and gently wipe your display. Next, rinse out your soapy cloth, wring it out again, and wipe your display to remove any soap residue. Finally, take your dry cloth and wipe the display to remove any streaking.

Editors" note:It"s time for spring cleaning! Week"s two"s theme: physical cleaning.Check backevery day this week to see how best to keep dirt, grime, crumbs, and other annoying bits off your devices. And be sure to return next week for more spring cleaning tips and tricks.

There’s definitely a wrong way to clean your TV or monitor screen. Mess it up and you’ll be looking at scratches, smears, or worse for a long time. Get it right and your display will gleam like the day you bought it.

Your TV or monitor manufacturer likely has its own set of cleaning instructions for your specific display type. This goes for LG OLEDs, Samsung QLEDs, and Dell touchscreen monitors.

While these manufacturer guides often err on the side of caution and recommend very little in the way of cleaning products, you may also find some specific advice to your particular display and the types of coatings used on it.

Some manufacturers, like Dell, recommend 70-90% isopropyl alcohol on some products. Others like LG recommend never even moistening the display. If your display is still under warranty, you might want to carefully follow these instructions to avoid any problems if you have to make a claim later on.

By far the most important thing to remember is to avoid any harsh cleaning chemicals, including glass cleaners like Windex, polishes, and even isopropyl alcohol unless you have specific clearance from the manufacturer that this will not damage the screen.

Such cleaning products are usually made with ammonia, alcohol, and contain other products and fragrances that could damage the display. These screens often have protective coatings on them to combat glare and reflections, or oleophobic coatings to repel fingerprint oil in the case of touchscreens.

If you’ve already used something like this will no ill-effect, consider yourself lucky and avoid using it again in the future. Many displays will be utterly ruined by the application of these household cleaners, leaving streaks and clouding that could render the display worthless.

Canned air is a great way of removing dust from a display surface without causing any damage. Dust particles, though small, may scratch sensitive surfaces when pressure is applied. By not touching the display, you’re minimizing your risk of scratching the delicate surface. This is especially true of glass TV and monitors, like those that use OLED technology.

Second to canned air is a high-quality microfiber cloth, ideally one with deep grooves to catch all of the dust without moving it over the screen. Use the lightest of touches when cleaning to avoid undue pressure on the display. You may need to turn to a microfibre cloth when canned air simply won’t cut it.

Avoid any paper-based cleaning products like tissues or kitchen towels since this contains lots of small fibers that can scratch the display. This is good advice in general when cleaning anything reflective, whether it’s a shiny plastic gadget or a pair of reading glasses.

You should take care when cleaning the microfibre cloths too. Avoid putting them in the wash with any fabric softeners or in the dryer with a dryer sheet since these products contain oils and waxes that may transfer to any surfaces you wish to clean. This will leave unwanted streaks on your display.

Lastly, if your microfibre cloth has a tag then be aware that the tag probably isn’t made of the same microfibre material and may cause damage to your display. For peace of mind, snip off any tags with a pair of scissors before using the cloth.

When air and dry microfibre cloth don’t cut it, you may need to turn to distilled water instead. While tap water often contains particles and minerals that may scratch your screen, distilled or “pure” water does not.

Use a pump spray bottle to mist a microfibre cloth until just damp, then spot-fix any stubborn grime that has adhered itself to your screen. This will likely only work for dry matter. Oil and other streaky marks will likely need a different approach.

Be aware that some manufacturers will never recommend using any moisture near your display. LG is one such display manufacturer that dissuades customers from doing so, though the company does not acknowledge that a dry microfibre cloth is often not enough to remove stubborn dirt.

You’ll have to use your intuition at this point. We’ve used distilled water and a microfibre cloth to remove dried-on grime from a glass-panel LG OLED with no ill effect since the alternative was a distractingly dirty screen.

Some experts recommend using a small amount of dishwashing liquid dissolved into distilled water to remove oily stains with a microfibre cloth. Once you’ve attacked the effective area, a clean microfibre cloth that’s been moistened with distilled water should remove any remaining residue.

If you’re not comfortable doing this, there exist purpose-built cleaning solutions like AudioQuest CleanScreen that promise to safely clean display surfaces without damaging them. There’s always a risk of damage when using any product, though purpose-made solutions are a lot safer than household cleaners and tap water.

LCD screens use LED backlights which can kick out a fair bit of heat, while OLED displays also generate heat as a byproduct of the chemical reaction that lights up individual pixels. Plasmas and CRTs were also notorious for heat production, so cleaning the back of a display is equally as important as cleaning the front.

Make sure you take the time to blow out any dust from vents using canned air or use a microfibre cloth to remove any material that may hinder cooling. Take care not to use a vacuum or similar since static electricity can build up and cause damage to internal components.

While you should take care to make sure dust buildup at the back of the unit is kept to a minimum, you’re better off cleaning the front of the display as sparingly as possible to avoid scratching glass or wearing down panel coatings.

Industrial LCD displays and computer monitors are generally very low maintenance, but they do need a good cleaning every once in a while to make the viewing experience more enjoyable and extend their lifespan. But it’s important that you learn the proper ways to clean LCD screens to avoid damaging them in the process. Keep reading to learn how to clean a monitor screen the right way, so that you can get the most use out of it and remove smudges, dirt, and germs.

Cleaning your computer screen the wrong way could actually damage it and lead to expensive repairs or replacements. To avoid this type of headache, here are some tips on how to clean a monitor screen the right way.

Computers usually come with special care instructions from the manufacturers that explain in detail the proper ways to care for your device and keep it clean. Before setting up your device, make sure to read through the care instructions carefully and follow them closely. If you have any questions or need further assistance, you can contact the manufacturer directly.

Make sure to turn the monitor off before you start cleaning it as wiping it with a damp cloth while it’s on can damage the pixels. Plus, it’s easier to see the dust, smudges, and dust particles when the screen is off and completely black. That way, you can make sure you get a thorough clean without damaging the screen. Turning off touchscreen devices before cleaning is also highly recommended so you can avoid accidental touches that perform the wrong actions or functions.

LCD screens have protective anti-glare and anti-reflective coatings on them to improve visibility. Touchscreens also have oleophobic coatings that prevent fingerprint oil smudges from appearing on the screen. Store-bought glass cleaners contain harsh chemicals such as alcohol and ammonia, which can penetrate the surface of the screen and severely damage its internal mechanism after wearing down the protective coatings. It’s best to stay away from using household cleaners on your industrial LCD displays unless you have the greenlight from the manufacturer.

Canned air is incredibly effective at blasting away dust particles, crumbs, hairs, and any other organic materials that can become stuck to your screen or lodged between the keys on your keyboard. This prevents the particles from scratching the surface of the screen.

Microfiber cloths are also a great option because they usually have grooves that gently capture and remove stuck-on particles while also removing smudges on the screen without damaging them.

If blasting the screen with canned air or wiping it down with a microfiber cloth doesn’t work, then your next best option is cleaning it with distilled water. Unlike tap water, distilled water isn’t fortified with mineral deposits that can scratch or damage industrial display monitors. Many manufacturers advise against spraying the water directly onto the screen for obvious reasons. Instead, spray a small amount onto a microfiber cloth until it’s just damp and gently spot wipe the parts of the display that need it.

Some manufacturers of industrial computer monitors also sell special screen cleaners that are meant to go along with their products. If you’re lucky, they might even be included with your original purchase. These are light cleaning solutions that effectively remove dirt, grime, and dust from your screen for optimal functionality and usability. After applying a cleaning solution to your screen, make sure to let it dry completely before resuming usage. Otherwise, you’re just going to smudge the screen again if it’s a touchscreen.

For more tips on how to clean a monitor screen and keep it in tiptop shape, contact Nauticomp Inc. We’re one of the leading suppliers of industrial computer monitors and displays around the globe.

Use a non abrasive cleaning solution, diluting isopropyl alcohol (not rubbing alcohol, as it may contain oil) into a solution of 50% alcohol and 50% with distilled water water (or purified/bottled water). You could also buy a cleaning solution that does not contain bleach, ammonia, or vinegar.

Before you start, power-off and unplug your monitor. Spray the cleaning solution on a soft cloth (for example an old T-shirt), lint-free microfiber cloth, or some other very soft cloth. A large cloth is best, since it will help reducing the risk of leaving streaks across the display from finger pressure.

Starting from the top, wipe the screen in one direction until you have cleaned the entire screen. Apply light, but distributed pressure. Repeat if necessary. Let it air dry.

Dirt, dust, and fingerprint smudges aren"t likely to do any long-term damage to your gaming monitor(opens in new tab), but they still suck. Why pay all that money for a nice screen only to have the visual fidelity brought down by smudges and dust. Let"s face it, your monitor is filthy—it"s time to clean it.

You might think that cleaning your monitor is easy, and you"re right. But you still want to be careful and avoid doing things like just wiping it with the corner of your t-shirt—or even worse, a paper towel. Here are a few do"s and don"ts:

Before we start, let"s go over a few big no-no"s, as accidentally damaging your monitor is a pricey mistake we want to avoid. Unfortunately, most of your go-to cleaning products are in here, including our PC favourites like isopropyl.

First off, avoid corrosive substances! That means no alcohol- or ammonia-based cleaners (like diluted rubbing alcohol or Windex). These cleaners can damage your screen by stripping anti-reflective coatings, cause clouding, or worse. Monitors have come a long way from the giant glass bulbs of old-school CRT screens, but that means they"re a lot more sensitive too.

Next, be careful what you use to wipe the screen. Paper towels might seem like a good option, but at a microscopic level, they"re actually quite abrasive. Ditto to t-shirts or other household rags, which might be harboring a stowaway spec of sand, metal, or something else that could scratch up your display in a single wipe.

Finally, you never want to spray your cleaning agent directly onto your monitor. Excess liquid runs the risk of pooling in the corner of your screen, seeping in through tiny weak spots and wreaking havoc on the sensitive materials inside.

1. Blast it — With those words of warning aside, let"s get down to the business of cleaning that monitor. For simple dustings, a blast of compressed air (the same stuff you use to knock dust out of your case fans(opens in new tab)) should do the trick, possibly followed up by a quick dry wipe-down.

2. Wipe it —As for what you wipe with, microfiber cloth is your best friend. Microfiber is extremely soft (at a microscopic level) and known for attracting dust and absorbing oils. Most importantly, it won"t damage your screen. We like these(opens in new tab), or these(opens in new tab) if you want to step up to a more plush option.

3. Wet it —For a little bit of extra cleaning power, slightly dampen your cloth with distilled water (no impurities to cause accidental damage), but not so much that water can be wrung out of it. Remember, we don"t want liquid to run down the screen and collect in the edges and corners. If water alone isn"t doing the trick, mix a cleaning solution of 50 percent distilled water, 50 percent white household vinegar. Same deal as before—apply liquid to the cloth, not the screen.

Now sit back, relax and enjoy the cleanest screen you"ve looked at in a while. Just remember to think of us now and then while you"re enjoying your gaming visual experience to its fullest capacity.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Before you give into your impulses and wipe your screen with whatever you have at hand, let us stop you right there. Your display is way more delicate than you think, and if you want it to last a long time in optimal conditions, you’ll need to treat it with proper love and care.

The good news is that cleaning a computer screen is more simple than you think. You only need a soft cloth, a tiny bit of water, and the most delicate of touches.

As you would expect, not all screens are created equal, and some are more delicate than others. The safest way to figure out the proper care for your screen is to search for the make and model of your device, find out if it has an LCD, LED, or some other type of display, and search for the manufacturer’s instructions on how to care for it.

If you want to skip all that, there’s an easy way to avoid making a mistake that might not only result in irreparable damage to your screen but to your entire device. According to Joe Silverman, owner of New York Computer Help, a tech repair center in New York City, no matter how much money you spent on your computer or tablet, it probably has an LED or an LCD screen if you bought it within the last three years—and neither type benefits from window cleaner or highly concentrated alcohol.

That’s the uppermost layer of your screen, which is extremely sensitive to the acidity in alcohol and in compounds like ammonia or propylene glycol. These are often present in cleaning agents such as window cleaners and degreasers. Using these liquids will corrode the surface of your screen, resulting in scratches or even smudges you won’t be able to get rid of.

“Underneath there it’s the most intelligent part of the laptop,” Silverman explains. “What happens is that the liquid will get through that first line of defense, and when it does that it’s going to really affect the sensors.”

Things get even trickier when you’re dealing with touchscreens. On models like the Microsoft Surface, the display is the main input—as opposed to your mouse or trackpad on a regular laptop—so it’s ultra-sensitive, Silverman says. Using a strong liquid cleaner like a degreaser or a bleach-based disinfectant can obliterate the top layer on the screen. Combine that with high pressure, and you can kiss your fancy touchscreen computer goodbye.

Another downside to newer computers is their size and weight. If you decided to splurge on a new laptop, for example, you probably found one that has top-notch components, but also a slick, lightweight design. This format is only possible if everything in your laptop is smaller and thinner. In the case of your display, a thinner screen means a weaker barrier between your computer’s guts and the elements in the outside world.

Caring for your screen is simple—it only takes a little bit of water and a dust-free cloth, such as a microfiber wipe or the piece of fabric that came with your glasses.

First, turn off your computer and disconnect the charger. This might sound paranoid, but the benefit is twofold—you avoid any chance of triggering an electrical surge, and your screen will remain black, which will make it easier to see any dirt and grime.

Pour a couple drops of water on your cloth. Forget paper towels or the sleeve of that soft cotton t-shirt you love—microfiber is your best bet. Still, no matter how soft it is, a dry wipe could always leave micro-abrasions on your screen. The moisture will also help gather dust and particles while lifting grease from your display.

Use circular motions starting in the center of your screen and moving outward, so you don’t leave any streaks. If you can see any droplets or water traces on the glass while you clean, you’ve used way too much water. Gently dab the residual H2O with an absorbent cloth or tissue paper and start again.

If you’re dealing with next-level gunk, you can use isopropyl alcohol at 70 percent or lower, Silverman says. “That percentage is very important,” he explains. “We’d only use 90 percent or higher on dummy parts that don’t have sensors, like top cases and keyboards.” In these extreme cases, spray the alcohol on the cloth, never directly on the screen, and wipe it gently.

Maybe you can get away with using a high percentage of alcohol or even a window cleaner on your computer screen once or twice. But if you keep at it, eventually you’ll see the deleterious effects.

The best way to avoid damaging your screen while cleaning it is to simply keep it from getting dirty in the first place. If you have a laptop, cover the keyboard with a thin microfiber cloth before closing it to prevent finger grease from transferring to the screen. If you have a touchscreen, wash your hands often before you use it, but make sure you let your hands dry completely before you start tapping—the soapy water or liquid hand cleanser from your fingers can easily end up on the screen and corrode it.

Wet, newly washed hands can also be detrimental to regular computers. Silverman says he often sees such victims in his shop—computers completely dead after hand sanitizer rubbed off the owner’s hands, seeped through the keyboard, and ruined the inner guts of the machine.

Your phone was designed to be carried, dropped, tapped, swiped, smashed against your face for long periods of time, and stowed in the deepest corners of your bag. In other words, its screen is way more resilient than your computer’s.

Silverman explains that most iPhones and Samsung phones, for example, have screens made out of one thick piece of glass. These, as opposed to computer screens, have all the LCD layers fused together, making them much more difficult to damage. Still, if you’re using alcohol, he recommends keeping the concentration at 70 percent or lower, using a soft cloth, and applying only low pressure to get rid of any accumulated gunk there.

Be especially careful with charging ports, as contact with water (also present in rubbing alcohol) can damage the electronics inside your smartphone. Newer models often are resistant to liquids, but there’s always a threshold to how much they can withstand. And you probably don’t want to know what that is.

Replacing the screen of your computer or smartphone can be expensive, and even if that’s not an issue for you, no one wants their devices to fail when they need them the most. So remember these tips well—we hope you never have to read this article again.

Is your computer monitor looking a little blurry? There may not be anything wrong with the monitor or your eyes. The monitor is probably dirty—covered with dust, fingerprints, smudges, and the occasional splatter from food and drinks. It"s time to clean your computer monitor.

Not all computer monitors are equal or can be cleaned the same way. So, it is vital to read your user manual or visit the manufacturer"s website before attempting to clean the monitor.

Glass-coated screens are not as delicate as non-glass-coated screens. Newer iMacs and Macbooks have a glass overlay like the big CRT monitors and vintage televisions.

If you aren"t sure what type of screen you have, use the least aggressive cleaning methods to remove dust and grime. Using caution may save you the cost of buying a new monitor.

The cleaning frequency necessary for a computer monitor depends on environmental factors and your usage habits. If the work area is particularly dusty, you frequently touch the screen or pick it up for moving, or are careless when eating and drinking around the monitor, clean it more often. For most users, a quick weekly cleaning will keep the monitor at its best.

You’re on your computer A LOT. If you’re like most people, you’re on it anywhere from 3 to 7 hours a day. And the screen is REALLY close to your face, like 12 inches or so.

Which means all that coughing, sneezing, coffee sipping, and touching is inevitably leaving behind a trail of gunky, oily, germy messiness. Most visible when the screen goes black, sure, but sitting there, staring back at you the whole time. What to do?

The sleeve of your shirt won’t cut it this time. It’s time for a computer screen intervention (aka a helpful cleaning guide) to bring the dignity back to your monitor.

Don’t directly wet the screen. That means never spray it. If you’re going to use a cleaning solution, spray your cleaning towel, and then wipe the surface of the screen. When you spray it directly, you risk oversaturating the pixels, which can cause component failures, electrical problems, and even fire.

Don’t use regular cleaning supplies. Using multi-surface or glass cleaning products is a big no-no. The chemicals in these products are too strong for your monitor. Even regular soap and water is too harsh of a solution for your computer screen.

Don’t press too hard. Use a gentle circular motion to clean your screen and never apply too much pressure. Doing so can cause permanent damage, and is a major bummer when all you were trying to do was remove that coffee splatter.

Turn your computer off. A black screen makes spotting smudges and oil schmears easier, but merely putting your computer to sleep isn’t enough. Powering your computer down ensures you don’t damage its pixels while they’re still firing electricity and also eliminates the risk of electric shock or even fire.

Use a microfiber cloth. Never use a paper towel, old t-shirt, or napkins to clean your computer monitor. At worst, the fibers in these materials may scratch the surface of your screen and at best, they’ll leave a trail of lint. Instead, use a microfiber cloth, which is made up of a super soft synthetic material that won’t cause any damage to your screen, and will wipe away debris beautifully.

Wipe gently. Use a gentle, circular motion to wipe your screen clean. For any tough food particles or debris, a repeated circular motion may help do the trick. If not, skip to the next method which will show you how to make a homemade cleaning solution. It bears repeating, never spray your screen directly with cleaners, or soap and water.

Clean the frame and base. The only areas of your monitor that can withstand multi-purpose cleaners are the frame and base of your computer. Very carefully, lightly spray a paper towel with the cleaner (don’t soak it!) and run it along the frame and base. Never apply the paper towel to the actual screen of your computer.

Turn your computer off. For this method, the first step is to again power down your computer so that you can easily see all the debris on its screen AND so that you don’t inadvertently cause damage or burnout to the pixels.

Make a cleaning solution. The first and easiest cleaner you should try is distilled water, which doesn’t contain any chemicals. If your screen needs something stronger, mix ¼ cup distilled water and ¼ cup white vinegar in a spray bottle. If you don’t have white vinegar, a ¼ cup of distilled water and a ¼ of rubbing alcohol will do the trick, too. This simple solution can be used on many household items, from windows to shower doors .

Spray the microfiber cloth. Spray your cleaner onto a clean microfiber towel. Never spray the screen directly or you risk component failure or electrical shock.

Cleaning your computer screen will provide the much-needed physical (and mental!) cleansing you so desperately deserve. If you’re on a laptop, you can rest assured you won’t offend anyone at the coffee shop or in the conference room with splatters from last week’s roast beef sandwich. If you’re on a desktop computer, a clean screen could be just what you need to feel at home in your home office. And if that doesn’t do the trick, hey, maybe try washing the walls. Either way, cleaning your monitor is a win-win.