prosine 2.5 lcd panel pricelist

This remote panel displays DC input voltage from the battery, DC input current (amps) drawn from the battery, power scale with inverter wattage output, and status/error display for shutdown conditions - overload, over-temperature, and over/under voltage. Comes with 25" (7.6M) cable.

PROsine is lighter and more compact than other inverters with similar power ratings because it uses high-frequency switching technology in the power conversion process. The power ratings of PROsine are taken at 40° Celsius, and this coupled with the unique cooling tunnel design means the heat is quickly removed from the unit. This cooling tunnel design helps PROsine to provide power for loads up to 50% greater than its constant output.

PROsine features, as standard, a removable LCD remote control panel. This panel can be located anywhere you choose & provides status information such as battery voltage, DC amperage being consumed and the AC wattage of your appliances. More importantly it provides an on/off switch to completely shutdown the unit when not in use (zero amperage drain on battery). The DC battery cable connection points are 8mm bolt posts that allows for DC cable connection of any size battery cable in a 180° rotation – Remember: Battery cables are the lifeline to your inverter. The bigger the better. One of the best features of the PROsine is the seamless AC automatic transfer switch. This allows for the easy integration into the onboard AC power system to provide seamless integration between the mains / generator power and inverter power.

All inverters use DC power while not being used, and PROsine can easily be switched into powersave mode (by the remote control panel), which drops the stand by current to less than .1 of an amp. Power is restored if you turn an appliance on (2.5 second search mode), or simply switch the inverter back into normal power mode, with a stand by current of around .75 amps.

PROsine is lighter and more compact than other inverters with similar power ratings because it uses high-frequency switching technology in the power conversion process. The power ratings of PROsine are taken at 40° Celsius, and this coupled with the unique cooling tunnel design means the heat is quickly removed from the unit. This cooling tunnel design helps PROsine to provide power for loads up to 50% greater than its constant output.

PROsine features, as standard, a removable LCD remote control panel. This panel can be located anywhere you choose & provides status information such as battery voltage, DC amperage being consumed and the AC wattage of your appliances. More importantly it provides an on/off switch to completely shutdown the unit when not in use (zero amperage drain on battery). The DC battery cable connection points are 8mm bolt posts that allows for DC cable connection of any size battery cable in a 180° rotation – Remember: Battery cables are the lifeline to your inverter. The bigger the better. One of the best features of the PROsine is the seamless AC automatic transfer switch. This allows for the easy integration into the onboard AC power system to provide seamless integration between the mains / generator power and inverter power.

All inverters use DC power while not being used, and PROsine can easily be switched into powersave mode (by the remote control panel), which drops the stand by current to less than .1 of an amp. Power is restored if you turn an appliance on (2.5 second search mode), or simply switch the inverter back into normal power mode, with a stand by current of around .75 amps.

Xantrex Freedom SW On/Off Remote Panel provides on/off functions for the Freedom SW series from a convenient location. The remote panel also has the ability to enable/disable the Ignition Lockout feature of the Freedom SW Inverter

New Xantrex Prosine Interface Panel. Model 808-1800. Xantrex Prosine Remote Interface Panel lets you mount the standard LCD Panel remotely in the location of your choice. This model is designed for use with the Prosine 1000 and 1800 models.

antrex 865-1025-01 Conext XW + Conduit Box. Conduit box add on to create systems larger than two inverters. Can also be used to refit XW Inverters into existing systems that may already have AC/DC disconnects. The ConextTM XW+ Power Distribution Panel (XW+ PDP) is factory-wired and labeled to support the integration of multiple Conext XW+ inverter/chargers and Conext MPPT Solar Charge Controllers with a single battery bank. The XW+ PDP ships with breakers, bus bars and cables to install a single XW+ inverter/charger. With space to add wiring and breakers a single XW+ PDP supports one to three XW+ inverter/chargers, a diesel generator and either four MPPT 80 600 or four MPPT 60 150 Solar Charge Controllers. The XW+ PDP supports single-phase split phase or three-phase installations. A field-reversible door and multiple conduit knockout entry points allow for the XW+ PDP enclosure to be mounted and configured on either side of the inverter/charger. The XW+ Power Distribution Panel is designed to save significant time and money during installation, when compared to custom solutions.

Xantrex Freedom 458 Basic Remote Panel provides valuable Inverter/Charger System Monitoring and Control of the Xantrex Freedom 458 Series Inverter/charger.

The Freedom remote control panel allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel.

Refurbished Xantrex Freedom Sequence together with the Freedom SW Inverter/Charger, System Control Panel (SCP) and Automatic Generator Start (AGS), the Freedom Sequence provides a complete integrated power management solution for RV"s. The Freedom Sequence enables you to monitor and control all the power components from a single, easy to use System Control Panel, rather than multiple, mismatched control panels. When used with the Freedom SW Inverter/Charger and the Automatic Generator Start, the Freedom Sequence provides automatic generator starting and stopping and automatic inverter assis support for maximum load usage, all behind the scenes. These power components that form a sing, cohesive Freedom SW power system are manufactured by Xantrex and are able to communicate with each other.

Our PPC Series comes with the AC/DC Smart Charger built-in to properly charge and fully maintain the battery voltage whilst providing clean 12Vdc power for all sensitive electrical equipment, with or without a battery in line. User adjustable DC voltage is standard so the PPC Series can be used with many battery types, including Lituim on our single Fixed output mode so no need to change when upgrading the battery type in the future.30 Amp AC and 12 Volt DC Distribution Panel

Refurbished Prosine 1000, Pure Sine Wave Inverter. The Prosine1000 delivers true sine wave output that is identical to Ac power supplied by your utility. This clean output makes it ideal for handling sensitive loads, while also improving AC equipment performance. Designed for recreational and industrial applications, expect the best performances from television, audio systems, speed tools, and any other electronics where you want nothing but the most optimal performance.

The Xantrex MPPT Solar Charge Controller is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries. The XW SCC can be used with 12, 24, 36, 48, and 60-volt DC battery systems. Two or three-stage charging process, with manual equalization to maximize system performance and maintain expected battery life Maximum Power Point Tracking (MPPT) to deliver the maximum available power from a PV array to a battery bank Configurable auxiliary power output Two-line, 16-character liquid crystal display (LCD) and four buttons for configuration and system monitoring in stand-alone applications Battery Temperature Sensor (BTS) to provide automatically temperature-compensated battery charging The Charge Controller is able to communicate its settings and activity to other Xanbus-enabled devices.

Refurbished Xantrex Prosine 1800 Watt Pure Sine Inverter. This Prosine delivers true sine wave output that is identical to AC power supplied by your utility. This clean output makes it ideal for handing sensitive loads. Designed for recreational and industrial applications, the 120-volt, 60Hz AC power output is capable of handling both heavy duty and smaller, multiple loads. The inverter includes a backlit LCD display panel, which can be mounted remotely.

The Xantrex 817-2080 Freedom HFS 2055 Inverter is equipped with quick-connect AC terminals, ignition control capability and programmable smart battery management logic. The quick-connect AC terminal on both AC input and output enables incredibly easy installation.True sine wave 120 Vac inverter/charger with built-in transfer switch