prosine 2.5 lcd panel quotation

We"ve got hundreds of hours of experience on these. We"ve drawn schematics of the DC-AC module and the drive circuits on the mainboard. We"ve developed a method of repairing them that includes checking all of the drive circuits and signals. We then connect the module so we can monitor it as we increase the input voltage from a current limited outside source. Once we have it running at the designated DC input voltage (215VDC) we monitor the waveform to ensure a clean stable sine wave output.

If you ever lost expensive equipment due to an abrupt voltage fluctuation, you are likely to remember the feeling of helplessness. Such events are typical when dealing with heavy recreational and industrial applications; therefore, it makes sense to invest in a power inventor that can safeguard your investment. Luckily, you can find a variety of PROsine power inverters on eBay, which should ensure time and cost savings.What are some features of PROsine inverters?

The following are some of the distinguishing features of this power inverter:Size: The use of high-frequency switching technology during a conversion process enables the manufacturer to keep dimensions of PROsine inverters smaller than identical power inverters. As a result, PROsine inverters are smaller and compact in design, making them practical for indoor and outdoor use.

No glitching: The clean output due to higher-frequency switching technology and low harmonic distortion means trouble-free sine wave electricity for most types of electrical appliances.How do PROsine inverters protect electrical appliances?

Designed for optimal performance, the power inverter helps by turning off the appliance whenever the temperature reaches abnormally high levels. Similarly, it provides safeguards against overloads. The system will also automatically adjust to any under or over voltage spikes that can cause irreparable damage to the equipment.Is there a difference between PROsine and PROsine International?

PROsine inverters are designed to be user-friendly, which means that the LCD display panel may give a number of error and warning messages during normal operational mode. Most of these error messages and warnings are self-explanatory; however, if the system stops abruptly, it is recommended to restart the system. Restarting the system will clear messages without changing any configuration settings, enabling users to resume normal operations.Content provided for informational purposes only. eBay is not affiliated with or endorsed by Xantrex.

Our boat (hull #33) was delivered in Oct 2003. We had to replace our Prosine 2.0 after 2.5 years (factory warranty is 2 years). It completely quit after an increasing set of error messages. I found that Xantrex does not repair the units. If in warranty, they simply send you a new one. If beyond the warranty period, you are out of luck. The best they will do for you is sell you another for a reduced price - about $1000. This is what we wound up doing, as it is cheaper than new ones on ebay. An outfit in Miami, Sunelec, had some refurbished ones (with six months warranty) for around $600, but were out of stock when we needed one. They substituted a Prosine 2.5 which had to be returned because it physically would not fit.

Yours, ours and Duetto"s make three failures in about 100 boats. A 3% failure rate (possibly much higher as there are probably failures I have not heard of) is not good. Our unit is mounted upside down in the starboard aft cabin in the compartment that is directly under the interior helm seat. In earlier boats it was in the wiring compartment behind the instrument panel. I understand it was changed because of overheating problems and to get it closer to the batteries. It is a good location in terms of wiring length as it is inches from the battery switch at the foot of the companionway and about as close to the batteries as one can get. Ours still overheated until James Power installed a short piece of ducting from the unit to a grill in the front vertical surface of the compartment. I also leave the compartment door open most of the time.

As retrofitting a different unit would be a major job due to wiring considerations, I am sticking to the Prosine 2.0 and hoping for the best. But I am not happy about it.

PROsine is lighter and more compact than other inverters with similar power ratings because it uses high-frequency switching technology in the power conversion process. The power ratings of PROsine are taken at 40° Celsius, and this coupled with the unique cooling tunnel design means the heat is quickly removed from the unit. This cooling tunnel design helps PROsine to provide power for loads up to 50% greater than its constant output.

PROsine features, as standard, a removable LCD remote control panel. This panel can be located anywhere you choose & provides status information such as battery voltage, DC amperage being consumed and the AC wattage of your appliances. More importantly it provides an on/off switch to completely shutdown the unit when not in use (zero amperage drain on battery).

One of the best features of the PROsine is the seamless AC automatic transfer switch. This allows for the easy integration into the onboard AC power system to provide seamless integration between the mains / generator power and inverter power.

All inverters use DC power while not being used, and PROsine can easily be switched into powersave mode (by the remote control panel), which drops the stand by current to less than .1 of an amp. Power is restored if you turn an appliance on (2.5 second search mode), or simply switch the inverter back into normal power mode, with a stand by current of around .75 amps.

Offering superior quality ture sine wave output, the PROsineTM 1000and 1800 stand-alone inverters are ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recrestional and industrial applications, their 120-volt/230-volt, 60HZ/50HZ AC power output is capable of handing both heavy duty and smaller, multiple AC loads. PROsine inverters include a backlit LCD display panel, which can be mounted remotely.