pentair easy touch lcd screen free sample

The EasyTouch Control System eliminates the inconvenience of trips to your pool equipment pad, memorizing operating sequences, opening and closing valves and resetting time clocks and thermostats. With push-button operation and clear, intuitive instructions and displays, your EasyTouch system includes all circuitry and fully programmable controls in a single Load Center installed near your pool or spa equipment. This avoids expensive wiring and installation costs to make an EasyTouch system affordable for any budget.

From our residential and commercial water solutions, to industrial water management and everything in between, Pentair is focused on smart, sustainable water solutions that help our planet and people thrive.

But, on the ET controller shown below you can see the header that connects the LCD to the main board... in a response above I suggested cutting the header pins, but there"s an easier way that doesn"t destroy the header...

You can heat the header pin between the two boards, as close to the LCD as you can, and then use the pump on the top of the LCD solder joint to suck out the solder. This allows you to heat and pump simultaneously... as soon as the solder melts you hit the pump plunger.

Pentair EasyTouch Automation Systems are the world"s best-selling pool and spa control systems by setting the standard for operating simplicity with push-button command and clear, intuitive instructions and displays. EasyTouch systems can manage a separate pool, a separate spa, or a pool and spa sharing the same equipment. Variable speed or variable flow pumps, pool lighting, landscape lighting, waterfalls, fountains, heaters, and more are controllable with the Pentair EasyTouch system. The Pentair EasyTouch Control System integrates resettable circuit breakers into the Load Center which is accessible by you or your service professional from outside your home.

The Pentair EasyTouch is full programmability of everyday pool and spa equipment operation for optimum efficiency. The service mode option aids in system testing and troubleshooting to give you real time results without the need of a service technician entering your home. The EasyTouch has a Time-Out feature that allows you to pause any program like a fountain or waterfall temporarily before automatically resuming several hours later. Push-button operation and clear, intuitive instructions and display, the EasyTouch system includes all circuity and fully programmable controls in a single Load Center installed near your pool and spa equipment pad.

The Pentair EC-520545 EasyTouch 8 Function Control Pool and Spa Automation System includes the IntelliChlor IC40 Salt Chlorinator Cell that can easily plug right into the control panel, as the IntelliChlor transformer is contained inside. The IntelliChlor IC40 Salt Cell automatically generates pure chlorine from mixing salt and the water that passes through the plates inside the cell. The IntelliChlor IC40 Salt Cell has the same amount of chlorine sanitizing capability with none of the drawbacks when using traditional chlorine. Say goodbye to itchy irritated eyes, dry skin, and bleached clothing. When using a Pentair IntelliChlor Salt Cell, it converts your pool"s water into a softer, much more luxurious feel, letting you swim more comfortably without the harshness of the chemicals affecting your body.

Optional controllers are available such as the Pentair ScreenLogic Interface Kit. With the addition of this kit, you can control everything from pool and spa temperatures, lighting and more - right from your favorite mobile digital device.

Can the Pentair IntelliChlor IC40 Salt Cell work on smaller pools?Yes, the Pentair IntelliChlor IC40 can sanitize in-ground pools that are up to 40,000 gallons. Simply adjust the sanitizer output.

Is the EasyTouch compatible with other brands of heaters or heat pumps?The EasyTouch Automation Control System is compatible with any gas or electric heater that has a two-wire remote connection point on it. Please refer to the heater or heat pump manual to verify the unit has this remote connection type.

What warranty does the Pentair EC-520545 EasyTouch Pool and Spa Control System carry?One year parts only warranty from the date of purchase. Please see the Pentair Warranty Card for more details.

EASYTOUCH PL4/PSL4 CONTROL SYSTEM ® FOR POOL AND SPA USER’S GUIDE IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS...

Customer Service / Technical Support USA Phone: (800) 831-7133 8 A.M. to 7:30 P.M. (ET) Fax: (805) 284-4151 Web sites visit www.pentairpool.com and staritepool.com P/N 522461 Rev. C 2/2020...

System Test ..........................65 Testing the Auxiliary Relays ......................65 Setting up the EasyTouch PL4/PSL4 Control System wireless control panel for the first time ..66 Synchronizing control panels ......................67 Wiring UltraTemp Heat Pump to EasyTouch PL4/PSL4 ..............67 Glossary ............................

F button to switch off the pump, only the heater will turn off, then the filter pump will automatically switch off after 10 minutes to allow the heater to cool down. Pentair Water Pool and Spa heaters do not require a cool down time. To override the “heater cool-down,” press the Filter Pump button again to switch off the pump.

When this button is pressed the solar relay is switched on to activate a booster pump, if installed, and activates valves to rotate to divert water through solar heating panels. Reset button: Press this button to reinitialize the EasyTouch PL4/PSL4 Control System outdoor control panel.

EasyTouch PL4/PSL4 Control System Indoor Control Panel and Wireless ® Controller Buttons Spa button/LED: For spa operations. Press the Spa button to activate the filter pump to rotate the pool/ spa valve actuators and circulate the spa water (LED on). Press the button again to switch the filter pump off (LED off).

Control panel buttons are disabled while in menu mode. Power ON, Menu/Back button (Wireless Controller): Use this button to power on the EasyTouch PL4/ PSL4 Wireless Controller. If there has been no button activity for 60 seconds (see page 54). The Menu/Back button to access, save and exit the system menu settings.

Set the cover aside. Battery cover crew (6x) EasyTouch PL4/PSL4 Control System Wireless Controller (rear view) Load the four batteries into the battery compartment. Orient the positive polarity end of each battery as shown below.

MODE: SCHEDULE AUX 1 08:00A -- 05:00P (12:00 AM - 11:59 PM -12 HOURS) S M T W T F S (DAYS OF THE WEEK) AUX 2 MODE: EGG TIMER AUX 3 TIME: 12:00 (00:00 - 23:59) / DON"T STOP MODE: NEW / DELETE / NONE EasyTouch PL4/PSL4 Control System Menus...

If the IntelliFlo pump is connected to an automation system, such as the EasyTouch PL4/PSL4 Control System, the drive must be powered up to receive and respond to the RS-485 serial communication from the automation system. However, the pump can be operated in “stand-alone”...

Before assigning a pump address, first set the address on the pump itself. If there is only one pump, it is always seen as pump #1 by the EasyTouch PL4/PSL4 Control System. In this case you do not need to set the pump address.

II Wireless Remote will not work, or will not work dependably. ® Symptom Possible Cause Solution Ensure power is being supplied and that the EasyTouch PL4/PSL4 Control power center operates correctly without the System Power Center does not receiver installed have power POWER LED does not light on...

Transmitter Battery is Replace Transmitter battery (type 2032 3V). prior function failing. PL4/PSL CONTROL SYSTEM FOR POOL AND SPA WIRING DIAGRAM EasyTouch PL4/PSL4 Control System Wiring Diagram (Outdoor Control Panel) EASYTOUCH PL4/PSL4 Control Systems User’s Guide ®...

10951 WEST LOS ANGELES AVE., MOORPARK, CA 93021 • (805) 553-5000 www.pentair.com All indicated Pentair trademarks and logos are property of Pentair Inc. or its global affiliates in the U.S.A.and/or other countries. Third party registered and unregistered trademarks and logos are the property of their respective owners.