remove good lcd panel from macbook pro for sale

Consumers can locate a new replacement for the screen or LCD panel on their Apple MacBook Pro. It is also possible for you to swap the screen or panel themselves with the proper accessories. Keep in mind that different screens or LCD panels used by the MacBook Pro will depend upon the model; many affordable options are available on eBay.

MacBook Pro - These are the original MacBook Pros made from 2006 to 2012. They come in three sizes: 13-inch, 15-inch, and 17-inch measured diagonally from the top-left to bottom-right corners. The model name, MacBook Pro, is written on the bezel beneath the screen, and the power button is located on the upper right corner of the chassis. Depending on the type of damage, it is possible to repair these Macs by replacing only the glass panel or LCD. In some cases, both panels need to be replaced to display properly.

MacBook Pro with Retina Display - The 13-inch and 15-inch Apple MacBook Pro Retina models were introduced in 2012 and feature much greater resolution displays and more powerful hardware than their predecessors. Retina Macs can be identified by their thinner chassis, lack of the name on the screen bezel, and the placement of the power button on the keyboard instead of on the chassis. If the screen on the Retina model is damaged, the entire display assembly must be replaced.

If your Mac"s screen is not performing as intended, there are a few symptoms that indicate that critical damage has occurred. Many Apple computers feature a glass panel atop an LCD panel, both of which may undergo damage. When damage occurs requiring screen replacement, a simple search on eBay will help you find what you need. Some common repairable issues include:

Cracks - These are some of the most easily identifiable forms of display damage. Cracks, similar to those seen in a broken windshield, are the result of blunt force damage to the glass of the MacBook. They can occur after the laptop has been dropped or banged. Cracks are easily observable whether the machine is powered on or off.

Distorted image - Visual anomalies include lines, unusual coloration, and blotches of black or distorted colors on an otherwise clear image on the screen. These distortions may occur after the device has undergone physical damage and can only be seen when the Mac is powered on. If you have a distorted image and cracks, it is possible that both panels of your MacBook are damaged.

Black display - If your Apple MacBook"s screen is totally black, it can be more difficult to determine the cause. While damage to the display is a definite possibility, this can also be caused by other hardware issues, such as a power supply failure or problems with software.

There is a guide for the 15" MacBook Pro that illustrates replacing the matte screen. In fact, you can pretty much follow that guide all the way through for the 17" as well. There are a few differences but not enough to trip you up.

The Intel model has the screen glued in! It will take a good heat gun suction cups and plastic picks to carefully pry the display off, often times the screen will fracture in the process so be careful you control the flying glass and razor sharp edges! Wear eye protection & proper gloves.

Just like the early 2020 Intel version of the MacBook Air Core i7 Apple offered TrueTone which requires new screens to be calibrated! So while a new screen will work you will loose brightness control & FaceTime camera functions. Even a new complete display assembly faces this issue as well. This is a special calibration program not available to the public only via Apples Global Services private network.

Now while not a solution today, Apple has made it clear they will be opening up a parts program for their gear. We don’t know when as well what will be covered time wise, or if access to the calibration tool will be offered.

Hi there! My name is Nathan and I have been working professionally on Mac Screen Repair, Website Design, and Data Recovery for over 15 years now. I am proud of the services I offer and look forward to helping you. Please don’t hesitate to contact me with any questions. I do offer all my services nationwide via my mail-in program. Not sure what you need? Get a free quote!

I offer MacBook Air screen replacement for every model of the modern MacBook Air from when it was introduced in 2010 to the present model. In order to complete the Macbook Air cracked screen repairs, a time-intensive process must be completed to remove the broken LCD panel and install a brand new LCD display panel. I am one of the few shops in the country that offers LCD-only MacBook Air screen repair with a 24-hour turnaround. After completing thousands of Mac screen repair projects, I can confidently say I am a MacBook Air screen repair expert!

As long as the edges around the screen aren’t dented and there are no bends to the display, an LCD panel replacement is all that is needed for a cracked screen repair.

Whether you need an older model Mac screen repair or a newer Macbook Pro Retina screen replacement, I can replace your damaged MacBook Pro screen with a new display to get you back up and running as soon as possible. If you have an older MacBook Pro with a DVD slot with a cracked screen, you may need just the glass replaced, just the LCD replaced, or both the glass and the LCD replaced. No matter which panel needs to be replaced, I offer MacBook Pro screen repair at affordable prices with a fast turnaround. Just fill out my quote form and let me know what you need and I will respond quickly with a quote.

As long as the edges around the screen aren’t dented and there are no bends to the display, an LCD panel replacement is all that is needed for a cracked screen repair.

There’s nothing but fast, friendly, professional service from a very talented tech and outstanding communicator. Nathan is an artist, he cares, he’s ethical. He’s good person. And that makes all the difference when you’re looking for somewhere to get your computer repaired.

Nathan is where it is at. While apple wanted my first child and left kidney to repair my MacBook Pro. Nathan came to the rescue with an unbeatable price.

His staff is also awesome, and combined they can fix anything. He swapped out the glued in battery in my Macbook Pro in a matter of minutes and found that I had a GPU issue that could be fixed under an Apple recall for free.

They’ve also got a really fantastic system in place that keeps the repairs in a database so all updates are kept in a service history. And unlike a lot of repair shops he actually updates you on the progress of the repair without any prompting. As always, a fantastic experience!

We all know how it feels when you bring a piece of equipment in for repair. You want to know what is wrong with it, how much it will cost to fix, and how you can keep the issue from happening again. And you want to know these things as soon as possible. I will keep you in the loop from the beginning of the repair to the end with my state-of-the-art repair system. You will receive regular email updates throughout the process including when I receive the computer, when I start working on the computer, when the computer repair has been complete, and when the computer is on its way back to you!

You can’t get work done without your computer nowadays. I understand that you need your computer back as fast as possible. My 24-hour Mac screen repair turnaround will get your computer back to you as quickly as possible. Once your computer is received, the repair process will be started and completed within 24 hours. Once the repair is complete I will send your invoice via email, and your computer will be packed and shipped back to you via 2-3 day air service.

Steve Jobs told how his father taught him to paint the back of the fence as well as the front, even though it would not be seen. I use the same approach here at Mac Screen Repair. I am not the kind of tech to leave screws out, mount the screens without adhesive, or scratch the computer on a dirty workbench. You can trust me to provide your Mac screen repair with the highest quality workmanship possible.

As a one-man shop, I am able to provide service that is way more personal than most other shops. I take care of everything including answering questions, repairs, and shipping. I know what is going on at every step of the process and I will treat you the way I want to be treated when I have a product of my own serviced. Mac screen repair is my specialty, I am happy to guide you through the process.

We design Apple products to protect your privacy and give you control over your information. Our products and features include innovative privacy technologies and techniques designed to minimize how much of your data we — or anyone else — can access. And powerful security features help prevent anyone except you from being able to access your information.

Affected devices were sold between October 2016 and February 2018. Apple or an Apple Authorized Service Provider will service affected MacBook Pro units, free of charge.

To identify your computer"s model and to see if it is eligible for this program, choose Apple () menu > About This Mac. Eligible models are listed below.

Please choose one of the options below for service. Your MacBook Pro will be examined prior to any service to verify that it is eligible for this program.

Note: If your MacBook Pro has any damage which impairs the service, that issue will need to be repaired first. In some cases, there may be a cost associated with the repair.

The program covers eligible MacBook Pro models for 5 years after the first retail sale of the unit or 3 years from the start date of this program, whichever is longer.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

It used to be that if your screen cracked on your laptop, you"d just replace the LCD and be done with it. That unfortunately is no longer the case. With the introduction of the Unibody Macbook and Macbook pro models, Apple changed the design of the display assembly. Now, there is a glass panel assembly that is placed on top of the LCD panel. The good news is that it is possible to crack just the glass panel and save yourself some money. The bad news is that it is also possible to crack both the glass panel and the LCD.

If you take your Macbook to most repair companies with a cracked display, they"ll undoubtedly say you need to replace the entire display assembly and charge you some astronomical figure. It really isn"t an extremely difficult procedure to do yourself however, and so we"ve created the guide below to show you just how to do it.

To begin, use a heat gun to loosen the double sided adhesive strip that holds the glass in place. Use caution, and heat the glass in short segments as over heating can cause damage to your LCD.With the glass heated, place a strong suction cup on the glass and pull up and away from the glass.

If heated properly, you"ll be able to see a small gap between the glass and the and the rest of the display. Insert a thin piece of plastic such as a credit card or movie rental card into the opening. Work the piece of plastic in enough where it can be slid along the seem of the glass. This will break the adhesive strip holding the glass in place.Repeat this procedure along the entire edge of the glass assembly. When you meet resistance, heat the area and repeat.

Once you have used a hair dryer or heat gun to warm the adhesive strip, use a strong suction cup to begin to separate the glass from the display assembly.

Caution: When pulling up on the suction cup, you should have to exert some force. However, do not apply excessive force as this could crack your glass or LCD. When you meet resistance, heat the area and repeat. At a certain point the glass will easily come free from the rest of the display assembly. Set the glass to the side on a clean, dust free, surface.

Next, remove 4 philips head screws ( 2 on either side ) holding the LCD to the display frame. Then remove the 2 philips head screws at the bottom of the display.

To reassemble, place the LCD back in the frame, and insert the LVDS cable backwards through the opening in the bottom the display frame. Then pull the cable through the opening. You can use a plastic pry tool to assist you in routing the cable. Be very careful with this cable as it can be easily damaged.

Line the bottom of the LCD up with the bottom frame, and slide it into the groove in the bottom frame. Then make sure the 6 screw holes are properly aligned. Replace the 6 philip head screws.

Thanks GladB, I was able to get a good hold sans "crazy glue" ;-) As I mentioned....I am a professional so looking good is ALWAYS IMPORTANT! My claim to fame is....."if it looks right!!! it is right!!!" I live by this Motto! ;-) Thanks for your response though!ReplyUpvote

I was able to do replacement successfully. (I am a puter professional ;-)..) But I have had issues with the lens replacement glue sticking well...Has anyone had the same issue and do you have a correct and pro solution? Btw....I cleaned and replaced lens correctly and new lens glue typically does not stick with any "perminance". Please advise?0

Thanks for the tutorial! But if it is too difficult, you can always sell your mac for spares to companies like www.macbookcrackedscreen.co.uk and use the money towards the purchase of a brand new Macbook :)0

I do this all day long for school districts. An opening tool like a isesame (a small metal strip) works great. As your work around the screen use guitar picks to keep the LCD to readhering (sic) to the tape. If you don"t have a plastic tool for the cable, try a small wooden kitchen probe.

I have this very thin pry tool I use. It"s even thinner than a butter knife. Helps through the heating process, but do not use any major pressure. If you are not sure what you are doing, take it to a pro http://www.callnerds.com/portland/0

Thank you very much. The LVDS cable went out on my Pro, so when i purchase a replacement tomorrow and it gets here next week, I will be using your wonderful guide.0

I broke the glass cover of my MacBook, so I ordered a replacement from PowerBookMedic.com (poor service, by the way). I tried to lift the cover using a suction cup. The cover did not come loose at the bezel, but instead it shivered into a gazillion of small parts. Removing it from the bezel was a biiiig PITA. I also used a heat gun to soften the sticky tape that held the shards on the bezel. Not good for the display...

People had a lot of questions when I pulled out my M1 MacBook Air at a party over the weekend: “What is that?” “What happened to your laptop?” “Is that the new Mac?” This was to be expected, as there certainly was something different about mine. See, my MacBook Air doesn’t have a screen — and I made it that way.

It’s a whole-ass computer inside a keyboard, not unlike PCs of yesteryear like the Apple II and Commodore 64. But this M1-powered slabtop is different from those relics; it’s got a trackpad, a long-lasting battery, and it has AirPlay.

What inspired me to decapitate my Mac was Apple’s patent published last month for a Mac embedded inside a keyboard, and the word that China has already turned this idea into a cottage industry. Rumor had it we would see a Mac like this at Apple’s event last week, but instead, we got the externally boring but actually amazing new Mac Studio. I must say, I was a bit smitten by the raw performance Apple was promising and began slapping my wallet nervously in my palm — but instead of choosing consumerism, I chose violence.

Look, I’m not crazy — I don’t go around looking at laptops and wondering how they would look with their heads chopped off, but I’ve probably replaced over a hundred display clamshells during my time as an Apple “Genius,” and I’m comfortable with it. The idea that plenty of people beat me to it also didn’t hurt: it’s been trending on Twitter and discussed on Reddit ever since that patent was published. Someone even made a slabtop with the forsaken Touch Bar, retaining at least one screen on their lap.

You could also lose access to Wi-Fi on certain older MacBook Pro models from 2008–2010 because the AirPort card and antennas were embedded in the display hinge. Thankfully, many of those models still have built-in Ethernet jacks from the era before Apple started taking away ports. (Ports are back, BTW.)

If you have a MacBook, you know, just sitting around, chillin’, happy as a clam...shell... you could make your own slabtop! Or you could be me and volunteer your cousin’s 2009 15-inch MacBook Pro while they aren’t around to supervise it.

But if your cousin isn’t as forgiving as mine, perhaps the eBay route is your best bet. I found recently sold listings for broken Touch Bar MacBook Pros going for around $400, either because they had cracked screens or a problem with the flexible display ribbon cables. But, hey, who needs flex cables anyway when we’re dropping dead weight?

Before we get started, make sure you have a toolkit with all the needed screwdriver bits: a pentalobe P5 to open up most MacBooks made 2012 or later, a Phillips 00 to open up most MacBooks 2012 or earlier; either way, you’ll want a full Torx set sizes 3-8 for various internal parts. You might also want a tri-wing Y1 driver to remove many 2010–2012 MacBook batteries (to avoid accidentally turning on your MacBook while working) or, in the case of the 2009 MacBook Pro, a pentalobe P6. It’s also nice to have a nylon pry tool and tweezers to safely pluck connectors and collect screws, or you could just grow your nails out for a few days as a substitute.

You’ll also need to have a monitor or TV to use your slabtop and a means to physically connect them. If your Mac only has USB-C ports like my M1 MacBook Air, get a USB-C to HDMI cable or a USB-C hub / dock that has a video output. But if your Mac is a bit older like that 2009 MacBook Pro, you’ll need a cable that goes from mini DisplayPort to whatever your external monitor uses, such as HDMI, full DisplayPort, maybe even DVI.

While I took apart the computers using sheer instinct, I did find a very good M1 MacBook Air display removal guide at iFixit and another one for the 15-inch 2009 MacBook Pro. If you’re opening up a different MacBook or maybe even another laptop entirely (heck, you could make a Chromebox from a Chromebook if you wanted to), you should look for a guide online on how to take it apart — or be like me and don’t, that’s up to you! Please be advised: I take no responsibility for any damage or injury caused by your attempt.

2009 MacBook Pro: The fan started spinning because I accidentally turned the computer on during surgery. Don’t forget to disconnect the battery. Photo by Umar Shakir / The Verge

For the past decade’s worth of MacBooks, the first step is to open the bottom case. Flip the MacBook upside-down and remove all the bottom screws (as many as 10) with either the pentalobe or Phillips driver, depending on the model. Be sure to note where each screw goes since some are longer than others, and the wrong ones could cause damage.

You may still need to pry slightly before it opens — with my M1 MacBook Air and the 15-inch 2009 MacBook Pro, I just needed to grab the aluminum base at the back edge near the vents and pull — you’ll feel a couple snaps from clamps holding them together, but don’t worry, it comes off easily. Most other MacBook models released come apart the same way — except for one major anomaly in the 12-inch Retina MacBook. That model has its battery and logic board attached to the bottom case with sensitive ribbon cables connected between the slabs. For that, I would recommend following this guide closely to avoid damage to the cable or battery.

The second step is to disconnect the battery. I made the mistake of skipping this step on the 2009 MacBook Pro and accidentally turned it on during surgery — better on my cousin’s MacBook Pro and not my MacBook Air, am I right? Anyway, for the 2009 MacBook Pro, I removed three pentalobe screws (tri-wing for the next few model years up), lifted the battery halfway up with its handy pull tab, then disconnected the battery.

The 2011 MacBook Pro’s battery is much easier to disconnect; you don’t even need to take the battery out. Ditto the M1 MacBook Air’s battery: all it takes is a flip-up and pull of the metal locking handle of the battery connector. (See image above.)

The third step is to disconnect and remove anything that comes in the way of getting to the display hinge screws, including internal video connectors, antenna connectors, and — in the case of my M1 MacBook Air — even the antennas themselves. Don’t worry — after the display is removed, you can put the antenna back and still keep Wi-Fi connectivity for your slabtop, unlike my cousin’s machine. Removing all these parts can be tricky, so you might want to follow an online guide for your particular model.

Disconnecting the antenna cables in the M1 MacBook Air. Don’t worry — these will go back when we finish up so you can keep Wi-Fi. Photo by Umar Shakir / The Verge

I removed a metal shield to reveal this display connector. Disconnect it and be mindful of it when taking out the antennas. Photo by Umar Shakir / The Verge

The fourth step is to remove the display clamshell. For my M1 MacBook Air: with the display cable disconnected and the antennas out of the way, I pick up the laptop and open the clamshell toits widest point, maybe 130 degrees. I then place the laptop upside down with the keyboard slab fully on the desk’s top and the display clamshell hanging down and off the edge of the desk like a wing. Hold it so it doesn’t slide off the table while you perform the next steps!

With the Air, there are six Torx screws holding the clamshell to the keyboard slab — three on each side — I removed two from each side and then only removed the last two screws after I was sure I could keep the lid from falling. The screen won’t necessarily pop off, though. You’ve got to dislodge the hinge from the frame first, and my trick is basically just to push the laptop screen as if I’m closing it while it’s upside down on the desk. It should pop out when the lid is nearly perpendicular to the base.

By the way, that step is a bit easier on the 2009 MacBook Pro. I kept the display open at a 90-degree angle off the desk instead of fully opening it, removed the screws, and then lifted the display straight up and off without any pushing or sliding.

The slabtop is almost ready, but you’ll need to put a few pieces back in if you want to close it up again and have Wi-Fi. With my M1 Air, all the non-display parts, including the antenna and its connectors, went back in. I even put the display hinge screws back in for safekeeping. I then reconnected the battery and firmly pressed the bottom case cover back on, and it gave a satisfying snap. Now I’m only 10 screws away from the final product — my new slabtop!

Did you succeed as well? If so, let’s go plug it in! You can connect it to a monitor or TV with the right cable, power it on, and you should get a picture on-screen in about the same amount of time it took on your built-in one — though, if it’s an M1 MacBook, you might not get a picture until it’s finished booting up. If the monitor gets to the login screen but only shows a wallpaper with nothing to click, it’s because the slabtop has phantom limb syndrome and thinks it should output to the primary built-in display, but you can hit Command + F1 to switch to mirror mode, which should then reveal the main screen. You can also now mirror your screen wirelessly to an AirPlay-compatible TV or streaming box. Once it appears on the TV, disconnect the cable and enjoy the freedom of a slabtop on your couch!

And as you walk over to the couch, you could take a moment to appreciate how unexpectedly lightweight the slabtop is and how the design sort of intrigues the mind and invites you to carry it around. I could see this actually become a real product Apple makes someday, maybe with a design that includes some sort of handle like Apple’s colorful iBook from 1999. A handle for the slabtop would compel you to carry it around and develop a bond — which reminds me of the decision Nintendo made in 2000 to add a handle to the GameCube.

But it’s OK for now; I’m having a great time watching videos, reading articles, and, yes, pricing out a Mac Studio with Studio Display, all from the comfort of my couch.

There are times when your MacBook Pro might be in need of screen repair. This can be due to different reasons and no one is ever happy when things break – whether it be an unintentional accident or due to some sort of malfunction.

Any laptop has the potential to fail and your MacBook Pro is no exception. Some small repairs can be fixed up in a matter of minutes while other issues might take longer and cost quite a bit of money.

One MacBook Pro repair that may seem complicated but is actually pretty doable on your own, is a screen replacement. This type of repair may sound intimidating but once you know the correct steps to complete the job, it’s actually pretty doable.

If you’re lucky, you may never have to replace your MacBook Pro screen. Under normal circumstances, these screens are really quite durable and long-lasting and are meant to withstand a bit of wear and tear over the life of your computer.

First of all, Apple admitted that the 2016-2017 MacBook Pro models have the ‘Flexgate’ display problem and it was only two years later that the issue was revealed to the public. The display problem most likely won’t affect the use, but it doesn’t look good.

Screens can also become blemished and scratched from steady use. Damage to the screen resulting from this type of daily wear and tear will build up over time and eventually cause your screen to look cloudy or scratched in appearance both when you are using it and when you look at the screen while the computer is powered down or in sleep mode.

Whether you have a small crack in your screen, a couple of large ones that make it almost impossible to see, or the screen is just scratched and blemished from a few years of steady use, a replacement screen is an easy option to make your laptop seem new once again.

The Apple Care Program is an option when you purchase your MacBook Pro. This program costs some money upfront but comes in really useful in case of an accident to your screen or any other part of your computer.

If you did not purchase your MacBook from Apple there still might be warranty programs in place from the provider. Be sure to call the business or location where you purchased your MacBook to see if they can offer the fix under any sort of warranty or if they have suggestions. They might not, but it is always good to check in before undertaking the repair yourself.

In reality, it is not that complicated of a process and you should be able to accomplish the task on your own with the right instruction and a few common tools.

If you are uncomfortable with the idea of trying to fix your screen, take it to a professional, but if you want to try it yourself, follow the steps below.

You’ll want to get everything in order before diving into this project so be sure to set up an area to work that is free of any obstructions, get all of your tools and materials in order, and clean the area of anything and everything that might be a source of dust or dirt.

The materials you need for this repair are: your MacBook Pro, the replacement screen (you can buy from Amazon or iFixit), a hairdryer, a screen cleaning cloth, and a suction cup.

Once the new screen is correctly in place, remove the plastic covering protecting the screen. Give the edges another round of heat from the hairdryer. Use the cloth the again press around the edges firmly. Your new screen is now installed!

Replacing a screen on your MacBook Pro is a repair that can be done by yourself pretty easily but should be done by a professional if your computer is under warranty or if you are uncomfortable completing the repair yourself.

Eric currently uses a 15-inch MacBook Pro for both work and personal errands. He did all the research and testing to make sure all the fixes and optimization tips shared on the blog are relevant to Apple’s latest macOS updates as well as fact-checking.

Whether you had a stellar experience or you think there’s room for improvement, please let us know. We value your experience at uBreakiFix above anything else. We want to hear from you!

Very satisfied with the people I dealt with and the diagnosis they arrived at. Time to complete the diagnosis was twice the original time stated. I would be extremely confident to have them handle any tech proble...

MacBook Pro RepairIf you need your Macbook Pro for work or school or home but are stuck dealing with a broken cracked screen or a battery that won’t charge, bring it to your local uBreakiFix for a quick and affordable Macbook Pro repair. Productivity shouldn’t suffer because of a broken device, and we can get your MacBook Pro back up and running in just a few hours.

Macbook Pro Repair Process Starting our Macbook Pro repair process with a free device diagnostic makes getting a repair quick and convenient. A skilled technician in your local store will examine your Macbook Pro, determine what the root of the issue is, and suggest the best repair service. If you choose to proceed with the repair, they can get started right away as your device will never leave our store. Device diagnostic exams are always free and customers are under no obligation to continue with the repair. Our Macbook Pro repairs typically take a day to complete, so you don’t have to be away from your device for long.

Macbook Pro Screen Replacement The most common issue we see with the MacBook Pro is screen glass damage. Frequent drops and other accidents are usually the cause but it’s a piece of cake for us. We can easily repair this issue. We can also help you with hard drive repairs, memory upgrades, disc drive repairs and battery replacements. If your computer is lagging or slow because of a virus or spyware, we can help you remove it. Did your device have an unfortunate incident with water or coffee? You should skip the rice and bring it right to a repair professional. The longer you wait, the more likely that corrosion and water damage will set into your logic board. We can do a free water damage repair diagnostic on your device to determine if we can fix it.

Promises and Warranties We want our customers to be confident that they are getting the best deal on their repairs. If you can find a lower advertised price for the same repair, our low price guarantee states that we will match and beat that price. All of our repairs also come with a 1 year warranty that is valid at any uBreakiFix location, protecting your device no matter where you roam. Description: Looking to repair your MacBook Pro? We Can Fix It, From MacBook Pro Screen Replacement, Battery Replacements, Keyboard & Case, Adware Removal and More

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

With Screen Sharing enabled, if you also clicked Computer Settings and enabled a password for VNC viewers, you should also or instead be able to use standard VNC screen-sharing software from any computer on the network (including a Mac), or one that can reach the network remotely.

We’ve compiled a list of the questions we get asked most frequently along with answers and links to columns: read our super FAQ to see if your question is covered. If not, we’re always looking for new problems to solve! Email yours to mac911@macworld.comincluding screen captures as appropriate, and whether you want your full name used. Not every question will be answered, we don’t reply to email, and we cannot provide direct troubleshooting advice.

Apple Studio Display is now officially available in stores, and there are already multiple customers around the world who have gotten their hands on the product. Unlike the Pro Display XDR, Studio Display has a unique power connector that seems to be non-removable. It turns out that the cable is detachable, but you need a special tool to remove it.

On its website, Apple says that the power cord of the Studio Display is not removable – and multiple users have thought the same thing. That’s because removing the cable with your bare hands seems to be impossible, but luckily the cable can be detached from the display.

As shown by @StellaFudge on Twitter, Apple has a special tool designed to remove the power cable from its new Studio Display. With the cable wrapped around the tool that works like a handle, the power cable can easily be disconnected from the display. Unfortunately, this is an internal tool created for Apple technicians, so you shouldn’t expect to find it available for sale anywhere.

Even if you have a tool like this, it may not be as useful when you use it in your home. The Studio Display features a proprietary power connector, probably due to its thin design, so you also can’t easily get a replacement cable from anywhere other than Apple. The only good news is that Apple is able to replace just the cable instead of the entire display, which should reduce out-of-warranty repair costs.

Apple doesn’t provide details about repair costs for the new Studio Display, but you can purchase a $149 AppleCare+ plan for it that covers damage and gives you an extra year of warranty.

It’s worth noting that some users have managed to remove the power cable from Apple Studio Display themselves, but this can result in damage to the product, and you should avoid doing this.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.