iphone 7 replacement lcd touch screen with home button brands

This is the easiest fix for your iPhone 7 broken screen.If your iPhone 7 LCD screen has been damaged and you are looking for an easy all-in-one fix for it, then you are at the right place! In addition to the LCD and digitizer, this LCD assembly for iPhone 7 comes with pre-assembled small parts that make your iPhone’s repair much easier. It includes the front camera, ear speaker, heat shield plate and camera bezel pre-installed to save you both time and the hassle of moving all of those small components from your phone’s old screen to the new one. If your iPhone 7 has been dropped or damaged for any reason, this is the replacement screen for you! Use this brand new replacement screen assembly to resolve nearly any touch screen or cosmetic issues your iPhone 7 may have! (Note: Only the phone"s original home button assembly will be capable of using the Touch ID functionality. Installing a new home button will only restore ordinary home button functions, not the Touch ID features.)

​​Our high quality OEM iPhone 7 LCD screens go through a rigorous testing and selection process so that you can rest assured that the replacement screen you receive carries the same quality and craftsmanship that was put into your device when you first bought it.

Apple calls the iPhone 7 screen a Retina HD display. Those are fancy words for a phone screen, but the numbers are definitely there to back it up. Just take a look at the panel features and specifications:Retina: A retina display has pixels that are small enough that they aren"t noticeable to the human eye. In this case that means a 4.7-inch screen with a 1334 by 750 pixel resolution for 326 pixels per inch. It"s enough to make curves seem smooth when you look at your iPhone.

Usability: The LED-backlit screen offers a contrast ratio of 1400:1 to one so that blacks stand out. With a brightness of 625 cd/m2, it"s usable on even bright days so you can take your iPhone to the beach and still see who"s calling.

While the Apple does not support changing your screen, you can take steps to ensure it does not become damaged or broken.Add a screen protector to avoid scratching the glass

Once the job is done, you can start using your Apple iPhone 7 immediately. The reason you must transfer the home button from the old iPhone 7 screen to the new one is that the fingerprint sensor ties to the original home button and if you change that, you lose fingerprint unlock. Also, be sure to use waterproof adhesive, as the replacement process breaks the seals, rendering your iPhone no longer waterproof.

Choosing the right replacement screen for your iPhone 7 can be a daunting task, especially with the plethora of options available on the market. In this article, we will guide you through the process of selecting a replacement screen that not only fits your budget, but also offers the best quality and compatibility.

Before you start shopping for a replacement screen, there are a few important factors you need to consider. Firstly, you need to decide whether you want an original equipment manufacturer (OEM) screen or a third-party screen. OEM screens are manufactured by Apple, whereas third-party screens are manufactured by other companies. OEM screens are generally more expensive, but they offer better quality and compatibility.

Next, you need to consider the type of screen you want. There are two main types of screens available for the iPhone 7: LCD and OLED. LCD screens are cheaper and more common, but they offer lower resolution and less vibrant colors compared to OLED screens. OLED screens are more expensive, but they offer higher resolution and more vibrant colors.

Finally, you need to consider the size of the screen. The iPhone 7 is available in two sizes: 4.7 inches and 5.5 inches. Make sure to choose a screen that is the same size as your iPhone 7, otherwise it may not fit properly.

Once you have considered the above factors, you can start looking for a replacement screen for your iPhone 7. There are several places you can buy replacement screens, including Apple stores, electronics stores, and online retailers.

Apple stores offer OEM screens, but they can be quite expensive. Electronics stores typically have a wider selection of screens, including both OEM and third-party options. Online retailers also offer a wide selection of screens at competitive prices.

Once you have purchased a replacement screen, you will need to install it yourself or have it installed by a professional. Installing a replacement screen can be challenging, as it involves disassembling your iPhone 7 and handling delicate components. If you are not confident in your ability to install the screen yourself, it is recommended to have it installed by a professional.

In conclusion, choosing the right replacement screen for your iPhone 7 requires careful consideration of factors such as the type of screen, size, and where to buy. By taking the time to research and compare your options, you can find a replacement screen that offers the best quality and compatibility at a price that fits your budget.

FACT 1: the home button has an embedded chip on the backside of the button. To use simple words, this chip stores the key that allows the board to recognize it. Thus if you use a different home button, whether original or aftermarket, the board will not recognize the home button.

As a result, the non-native home button will not be able to scan the finger print and will not react to any input. The phone will act as if it"s missing the home button completely. A message will also appear "Touch ID cannot be activated." The only way to have the home button function in this case is by using the assistive touch aka virtual on-screen home button. And the only way to wake the phone would be by using the power button or raise to wake.

FACT 2: Apple - and only in an Apple owned Apple Store, but starting to show up at some AASPs as I write this - can replace the screen and home button and reprogram the new home button and pair it with the board/phone. If a third party repair shop or DIYer damage the home button during repair, or the owner breaks it somehow, or it fails, the only way to have a home button function restored at this date is to take it to an Apple Store or one of those AASPs that are starting to receive the pairing machine.

FACT 3: Apple did nothing to prevent replacing screens with OEM or aftermarket parts. If you replace the screen and transfer the home button without damaging it, everything will work normally. But expect cheap parts to perform poorly. So invest in good quality parts from reputable vendors. Replacement screens should be as close as possible to Apple screens in terms of : color fidelity, backlight, touch, force touch, durability, frame lifting, frame finishing.

FACT 4: many replacement screens have a defective home button interconnect cable. When the home button works with the original screen but not the replacement screen, it is a bad screen and you need to warranty it or replace it. And yes a whole batch can be defective.

However, sometimes while disassembling the iPhone, you damage the home button extension cable on the broken screen, then you try to fit a bad replacement part. Now home button doesn"t work on neither the old nor the new screen, and you assume the home button itself has failed. Well no, sometimes it hasn"t.

FACT 5: you may damage the home button and completely lose all functions, specially if you tear the home button cable. Some very patient people resolder the pieces together. I would rather fit an original broken screen together with the damaged home button and send them to an Apple Store for complete screen assembly replacement and pairing (see FACT 2). The cost of the new screen from Apple is comparable in price to the cost of stitiching the broken home button back together in my opinion.

FACT 6: in some instances, a chip (other than the one in FACT 1) present on the home button is damaged (specially during transfer of home button from broken to new screen). When damaged and failing, this chip will prevent home button function from working such as to exit an app and go back to home screen. But the finger print scanner would still be working and you are able to wake/unlock the screen with your finger/fingerprint and use reachability. This chip is accessible (contrary to the fingerprint scanner chip in FACT 1 which is practically unreachable) can be replaced and the issue can be fixed. Sometimes a partial tear to the home button cable can cause the same failure. It is also repairable by some people with the right tools, skill, and patient mindset.

FACT 7: some repair techs noticed that a damaged front cam assembly can interfere with the functioning of the Home Button/Touch ID. To rule out this possibility, test the Home Button + Touch ID functions after disconnecting the front camera flex cable. BUT, starting with iOS 11, front cam assembly may need to be present/connected for the iPhone to boot. So may be try a different/known good one.

FACT 8: after the release if iOS 11, and up till iOS 11.0.3, we noticed that some iPhone 7 devices cannot boot completely or may boot-loop if home button is missing or damaged (as well as front cam assembly). [Not verified yet: a fellow tech observed that some i7 would boot without home button attached. His theory is that the board version that has a certain Intel chip would boot without the home button while the board version with a Qualcomm chip requires the home button to be installed to boot].

Group Vertical was established in 2009 and has grown to become the leader in wholesale replacement parts for cell phones, tablets, laptops, accessories, and more.

“Original” screens are those containing LCDs manufactured for Apple. “Copy” screens are compatible replacements entirely designed and manufactured by third-party companies not associated with Apple.

LCD display panel can have poorer resolution (i.e. looks “coarser”), worse brightness, contrast and vibrancy and reduced refresh rate amongst other problems.

Changes in specification from original can result in battery and performance issues. Certain badly-engineered screens could even damage the backlight circuitry.

Customers who bring their iPhones to us for a screen repair are offered two choices of replacement- an original or a “copy” screen. The most common response is “Is there a difference- and which one would you recommend?”

Originals are those screens containing LCDs that were manufactured for Apple. So-called “copy” screens are compatible replacements, but designed and manufactured entirely independently by third-party companies, typically in China.

Our answer is simple- the original screen is the one we’d go for ourselves, every time. Some people think we make more money on them, but this isn’t the case. We recommend originals because they’re far higher quality and the price difference is fairly small.

We’d rather only fit original screens. The only reason we don’t is that many people will shop around and choose purely on price. As such, we need to offer the cheaper copy screens to remain competitive and avoid losing these customers. In some cases, they didn’t even know there was a difference in the first place- especially since it’s not in some shops’ interest to draw people’s attention to the issue!

This may well be the worst copy screen we’ve ever come across. As a result, the unfortunate customer has ended up paying twice to have their screen replaced- we’re sure that had they been properly informed, they would have chosen an original in the first place.

While the difference in price between copies and originals can vary across devices, it’s generally around £10 – £14 extra to have an original screen fitted. This really isn’t a lot considering the improved quality and reliability.

We compare our prices to our competitors- and we know that we come out of it favourably. While we have to offer copy screens to remain competitive, we always advise customers to go for the original.

When you’ve spent- directly or indirectly- several hundred pounds for an iPhone with a Retina display, it doesn’t make sense to replace it with a lower-quality screen that can make a £400 phone look like a £40 one! Not only that, but you’re likely to have fewer issues, and a longer-lasting screen.

There’s nothing stopping any random person without training or experience opening up a smartphone repair shop. As a result, the industry is full of companies with little skill or experience who are only interested in getting hold of your money and installing the cheapest parts they can find.

Many- if not most- don’t even acknowledge the existence of copy screens, let alone explain the difference to the customer. Hardly in their interest to do so if they only fit cheap, low-quality copies. Some of them can hardly be blamed- they know so little, they’re not even clear on the differences between OEM, non-OEM and copy displays themselves! Others can be more deliberately misleading… and some outright lie.

Generally, these shops are looking for the cheapest price on replacement screens.. When offered a copy at a half or a third of a price of the original, they’re going to go for that. That might be fine if they offered the customer a cheaper price- what we disagree with is selling “supermarket beans” (i.e. the copy screens) at “Heinz beans” prices!

Heading towards the “blatantly fraudulent”, we’re aware of companies that shamelessly fit copy screens while claiming them to be original. Worse, they’ll take your broken original screen and sell that to a recycler for more than they paid for your copy!

Apple tightened up their supply chain around 2015, which reduced the number of screens available for repairs and increased their price dramatically. A lot of companies went bankrupt, and Chinese manufacturers responded by making their own “copy” screens from scratch. At first, these weren’t much cheaper than the Apple ones, but the price soon fell.

We should be clear that- despite the name- “copy” screens aren’t direct copies of the Apple originals. Rather, they’re compatible replacements that have been designed from scratch and- as a result- vary in some respects that have an effect on usability and quality.

One of the most important differences between an original and a “copy” screen is how the digitizer (touch sensor) is designed. Apple has it manufactured as part of the LCD itself, whereas the copies have it on the glass.

Although there are only a small number of manufacturers of the bare LCDs themselves, these are then bought by countless other companies who add the remaining components needed to turn these into a complete working screen. As a result, you could easily end up with an LCD from the best “copy” manufacturer, but the digitizer/touch (as part of the separately-manufactured glass) from the worst.

There are countless digitizers out there, and you can only take the supplier’s word that the quality is good. Many ship good ones at first, then switch to cheaper parts to make more profit. This is particularly bad with the iPhone 6S and 6S+, since Apple moved the chips responsible for touch processing onto the LCD itself. As a result, you’re not just getting a copy screen- you’re getting copy chips too.

The performance specification (power drain, etc.) of most copy screens isn’t identical to the originals. As a result, they can drain the battery more quickly and mislead the operating system which was optimised for the original screen design.

It’s even possible that this mismatch could damage your backlight. We do a lot of subcontracted repairs for less-experienced shops, and get backlight repairs in almost every day. We’ve had cases where we fixed the circuit, fitted the new copy screen to test it, and had it break the circuit again!

Copy screens can disrupt the touch ID fingerprint reader. With the 6S, 6S+, 7 and 7+, the home button- part of the 3D touch- is part of the screen assembly. Frequently the home button flexes on aftermarket designs don’t work properly and stop the touch ID working- annoying if you use it to unlock the phone or log in to your bank.

We’ve seen many lift away from the frame that holds them in place. This usually results in the flex cable getting torn, and the screen needing replacing. You don’t even need to have dropped the phone- this often happens through general everyday wear and tear.

That brings us to another major issue with the copies. When you drop an Apple original, the glass often breaks, but if the LCD itself is intact, you can continue to use it until it’s fixed. With the copies, the touch/digitizer is on the glass and stops working when that’s broken. Even worse, the LCD itself is more likely to break due to the thinner and more fragile glass.

We’re not convinced this will happen, since Apple recently changed their repair policy to accept iPhones with third-party screens. However, it is possible that copy screens could be stopped from working via an iOS update, since those make a number of security checks.

iPhone 7 Plus LCD Screen and Digitizer Touch OEM replacement part is our most economical screen replacement option. It does not include the home button, front camera flex cable, earpiece speaker, and the LCD shield plate, You"ll need to transfer those parts from your original screen assembly.

Note : The Touch ID function will only work with your phone"s original home button assembly. This replacement part does not include the home button. You will need to transfer the button assembly from your old display to retain Touch ID.

Improper installation may cause damage to your device, we are not held responsible for any loss occurred to your devices as a result of poor or improper installation of replacement parts.

Images color of the product may differ from the actual product due to varying camera settings and device screen display. However, we strive to present closest to reality illustration of our products.

If you notice issue with any product / spare part purchased, please show us picture proof or video proof of the problem as soon as possible within (7 days) from the day that you received your item.

No warranty / returns will be accepted after (7 days) from the day that you received your item if we were not informed within the allowed 7 days duration.

c) To replace the faulty & defect LCD DisplayTouch Screen Digitizer Assembly. Such as the screen dose not respondproperly, display problems, distortion pixels, cracked LCD screens,wrong color issues and old & dead LCD.

Could you please check and do it as below? a.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector.

Please transfer the home bottom from your orginal screen,Because only the orginal screen can make your touch ID work . This item is not include home bottom