tft lcd color monitor no sound factory

I have a new HP Pavilion Elite HPE-1401f computer. I also have a Sony monitor (TFT LCD color computer monitor) (SDM-X72) with internal built-in speakers.

I am unsure as to where I should plug the black audio cord from my monitor to the new computer. Currently, the black cord is plugged into the orange c/sub outlet in the rear of the computer.

Harassment is any behavior intended to disturb or upset a person or group of people. Threats include any threat of suicide, violence, or harm to another.

When you meet a technical problem, you can use the following tips to troubleshoot the problem, and also enjoy the fun of solve problem. If can’t solve the problem, now, you need contact us.

A few permanently bright or dark pixels are considered normal by industry standards. The exact number of pixels that are allowed varies depending on the monitor. Refer to Dell Monitor Quality and Pixel Policy for more details.

When the monitor is connected to a PC via HDMI and PBP mode is turned off, the monitor may display images at the lower resolution (2560 x 1440) rather than automatically switching to the native resolution (5120 x 1440).

When the monitor is turned-off and back on, the monitor may blink twice. This issue may occur if the PC is using a Nvidia Graphic NVS 310 card and graphics card resolution setting is 2560 x 1600.

To resolve the audio icon displaying, update the video or graphics (GPU) driver to the latest version. To learn how to download and update a device driver, refer to the Dell knowledge-base article How do I download and install a device driver?

If the monitor is powered-off and powered-on when displaying the Blu-Ray video, the Blu-ray player may lose the data signal from the system to the monitor.

To learn more about how to set up and configure the Dell SE2222H monitor with a Dell docking station. Refer to your System Requirements and Supported Configuration in the support site.

This is normal behavior of the monitor. Dell consumer monitors are inspected at 150-lux ambient lighting (similar to typical office lighting). Dell UltraSharp and Gaming monitors are inspected with a tighter criteria of 70-lux ambient lighting (dimly lit room but not dark).

Dell SE2222H monitor uses a curved IPS panel, the corners of the screen may appear slight yellowish or pinkish, especially when viewing in dark room. This is normal IPS panel behavior and typically does not affect the overall viewing performance.

Dell SE2222H monitor is factory default set at HDMI EDID with 3 Block (Detailed Timing Descriptor) to support 5120 x 1440 @ 60 Hz. To display a resolution of 3840 x 1080 @ 60 Hz or lower, you need to switch the monitor HDMI EDID from 3 Block to 2 Block.

For help with video or display issues such as no video, no display, blank or black screen, flickering, screen resolution or color issues, horizontal or vertical lines, and more see an expanding section below.

Ensure that your Dell monitor is set up properly. Assemble the monitor stand and set up the monitor ergonomically. Connect the cables and organize them. These tips help make the viewing experience the best it can be.

The standard monitor stand is detached when the monitor is shipped from the factory. To learn more about attaching the standard monitor stand. See the Setting Up the Monitor section in the Dell S2422HZ User Guide.

The top edge of the screen must be at eye level when you are sitting comfortably. Adjust your chair height or the height of the monitor to achieve this.

NOTE: Dell S2422HZ supports display over USB-C port with Alternate mode DP 1.2. Ensure that the USB-C on your computer supports Alternate mode DP 1.2 or above.

CAUTION: Dell S2422HZ monitor setup must comply with the recommended panel orientation and working angle only. Setting up the monitor in an orientation that is not recommended may damage the monitor and/or cause a safety hazard.

Use the buttons at the bottom of the monitor to access the On-Screen Display (OSD) menu of the monitor. To access the On-Screen Display (OSD) menu, press Button 5 (Figure 4) at the bottom of the monitor.

NOTE: Any changes that you make are automatically saved. Whenever you move to another menu item, exit the OSD menu, or wait for the OSD menu to automatically close.

Resetting a monitor to factory defaults can help resolve many video or display issues. To reset your Dell S2422HZ monitor to factory default settings, follow these steps:

If your Dell monitor has a blank or black screen, fuzzy or blurry image, flickering, distorted or any other screen abnormalities, running a diagnostic test helps determine if the Dell monitor is functioning normally. To learn more about diagnostic options on a Dell monitor, see the Dell knowledge base article How to Run a Diagnostic Test on a Dell Monitor.

No POST - Your computer is not showing any indication of activity. For example, the screen is blank and does not display the Dell logo during start-up.

Your Dell S2422HZ Monitor provides a self-test feature check that allows you to check whether the monitor is functioning properly. If the monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:

If your monitor screen remains blank after you use the previous procedure, check your video card (GPU) and computer, because your monitor is functioning properly.

Your Dell S2422HZ monitor has a built-in diagnostic tool. It helps to determine if the screen abnormality you are experiencing is a problem with the monitor or with the video card on your computer.

When you notice screen abnormalities such as distortion, clarity, horizontal or vertical lines, color fade, it is a good practice to isolate the monitor by running the Built-In Diagnostics.

NOTE: If you do not see any screen abnormalities in the built-in diagnostic mode, the monitor is functioning properly. If you notice any abnormalities in the built-in diagnostic mode, contact Dell Technical Support for repair options that are available in your region.

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. Such pixels are hard to see and do not affect the display quality or usability. For more information, see the Dell knowledge base article Dell Display Pixel Guidelines.

This section provides information about troubleshooting steps that can help resolve the most common issues with the Dell S2422HZ monitor. Alternatively, to learn more about troubleshooting common issues on Dell monitors, see the Dell knowledge base article How to Troubleshoot Display or Video Issues on a Dell Monitor or use our monitor self-help guide.

A few permanently bright or dark pixels are considered normal by industry standards. The exact number of pixels that are allowed varies depending on the monitor. Refer to Dell Display Pixel Guidelines for more details.

You can adjust the volume by adjusting the volume bar on the player application (like media player), not the Windows OS level or adjust the volume through the line out external speaker device.

The USB hub of the DUT cannot be detected by specific systems (Apple M1) when connecting DUT to the system through a USB-C cable and then restarting the system.

For the webcam to function, connect the provided USB-C to USB-C cable between the computer and the monitor. If the computer does not support USB-C, use a USB Type-A to USB-C cable (optional purchase).

Ensure that DELL Monitor RGB Webcam is the default camera in apps such as Microsoft Teams, Skype, or Zoom. To learn how to change the webcam settings in these apps, go to the software manufacturer"s website.

For the integrated microphone in the monitor to function, connect the provided USB-C to USB-C cable between the computer and the monitor. If the computer does not support USB-C, use a USB Type-A to USB-C cable (optional purchase).

Under Choose your output device, select Echo Cancelling Speakerphone S2422HZ. If the default output device is set to DELL S2422HZ, the integrated microphone on the monitor is not supported. The DELL S2422HZ output device is suitable for audio playback only.

NOTE: If you do not see the recommended resolution as an option. Update the video card (GPU) driver from the https://www.dell.com/support/drivers website or the video card (GPU) manufacturer"s website. To learn how to download and update a device driver, see the Dell knowledge base article How to Download and Install Dell Drivers.

Built-In Self-Test - The Dell S2422HZ monitor has a built-in self-test that helps you identify if the screen abnormality is with the monitor or the video card (GPU) on your computer. When you notice screen abnormalities like distortion, clarity, horizontal or vertical lines, color fade. It is a good practice to isolate the monitor by running the Built-In Diagnostics.

The Troubleshooting section of this Dell knowledge base article provides information about troubleshooting common issues with the Dell S2422HZ monitor. The section has troubleshooting steps on how to resolve power issues, video issues, color or clarity issues, distortion issues, horizontal or vertical lines, brightness issues or pixel issues, and so on.

To navigate the On-Screen Display (OSD) menu, use the buttons on the monitor. The monitor control buttons are usually on the right side, either on the side, front, or bottom of the monitor. To access the On-Screen Display (OSD) menu, press Button 5 on the monitor.

For more information about using the On-Screen Display (OSD) menu and different menu options, see the Operating Your Monitor section in the Dell S2422HZ User Guide.

Additional monitor information such as the model number, firmware version, and Service Tag can be accessed from the monitor"s OSD (On-Screen Display).

The USB-C port on your Dell S2422HZ supports USB Power Delivery. The USB-C port can supply power (65 W) to a compatible laptop using a single USB-C cable that is provided with the monitor.

NOTE: Up to 2 A on the USB downstream port (the port with the SS SuperSpeed battery icon) with BC 1.2 compliant devices; and up to 0.9 A on the other USB downstream port.

NOTE: The monitor’s USB ports work only when the monitor is on or when the monitor is in Standby Mode. When the monitor is on, in Standby Mode, if the USB cable (Type-C to Type-C), is plugged in, then the USB ports can work normally. Otherwise, check the OSD setting of Other USB Charging, if the setting is “On in Standby Mode” then the USB works normally, otherwise the USB is disabled. If you turn off the monitor and then turn it on, the attached devices may take a few seconds to resume normal functionality.

If you are using a Dell laptop that supports charging using USB-C. Update the BIOS and Video or Graphics card (GPU) driver. To learn how to download and update a device driver, see the Dell knowledge base article How to Download and Install Dell Drivers.

CAUTION: Dell S2422HZ setup must comply with the recommended panel orientation and working angle only. Setting up the monitor in an orientation that is not recommended may damage the monitor and/or cause a safety hazard.

If the built-in speakers on the monitor do not produce sound, perform each step that follows, testing for sound after each step, until you can hear sound:

If the sounds are normal when using other software programs, the issue is with the software on the computer, and not the speakers in the monitor. If sound is missing from other software, continue using this procedure.

Check the cable connection. If the monitor-to-computer connection is a VGA cable (usually blue on both ends), an additional audio cable is needed between the monitor and the computer. Check that the audio cable is connected properly.

If the monitor is connected to a computer using an HDMI cable, the HDMI connection can be used for audio as well as video. Ensure HDMI audio is selected as the main audio output in the operating system (for example, Windows Audio Properties in Control Panel). For more information on this subject, please read Using HDMI Audio with a Desktop Computer.