Typically, standard LCD modules provide a temperature range of -20°C to +70°C. To meet the need of customers, NEXT VISION DISPLAY has developed a series of wide temperature TFT LCD modules with operating temperatures ranging from -30°C to +80°C, and the maximum for some models can reach 85°C.

Can LED TVs freeze

However, NEXT VISION DISPLAY Glass Heater is designed to deliver optimum performance in low temperatures in order to accommodate for diverse industrial applications. It also ensure safe operation of display keeping control panels operational in inclement conditions or clearing surfaces of unwanted snow, ice, or condensation. In particular, it is possible to integrate with TFT LCD Display.

As the result, it shows 4.3 inch TFT LCD Module display functionally under normal operating conditions. However, there is an overlapping at low temperature, because of LC’s physical characteristics. From this experiment, we know that overlapping can be solved by turning on Glass Heater.

Comparing to PET Heater (Table 3), NEXT VISION DISPLAY’s Glass Heater has higher transparency, better thermal conductivity, heat and humidity resistant and so on.

While directly current flows in ITO’s resistance, it will turn electrical energy into heat. The smaller resistance is (the higher consumption power is), the more heat it can generate. The concept is similar to Traveling immersion coil. When we plug in Traveling immersion coil, the current will flow in metal and generate heat to boil water.

We put TFT LCD Module into the test in an environment of constant temperature and humidity machine and then set the temperature at -40℃.

The LCD in cold temperatures may cause misreading because of the response time of LC (physical characteristics). It will turn slowly and make the screen overlap. (Figure 1)

NEXT VISION DISPLAY developed LCD Heater to integrate with our TFT Display Module so that can show optimal view even in low temperature. For materials, heaters can be used with transparent resins, such as glass and poly-carbonate. Our LCD Transparent Heater is made of glass substrate, so we name it “Glass Heater”. It can not only improve the LCD image sticking issue efficiently, but also have heat and humidity resistance advantage.

When we operate LCD display in an extremely low temperature environment, the screen may turn dim or go black and if it left in such conditions for extended periods, which may cause permanent damage to the display.

LED TVtemperature range

In summary, when selecting an LCD display for an extreme temperature environment, the first thing designers need to evaluate is the operating environment: temperature, moisture, and humidity. Additionally, they also need to consider what will be displayed on the screen: display performance, clarity and correct information. With all these factors, it will help select the best display for the application.

WhattemperaturedoLCDscreens freeze at

Image

Image

Image

It shows that 4.3” TFT Display with Glass Heater in voltage 9V/12V delivers output currents of 600mA and 830mA respectively.

LCDdisplaytemperaturelimits

It’s an ideal solution for TFT display to operate in cold environment. NEXT VISION DISPLAY integrate the TFT LCD module, LCD transparent heater (Glass Heater) and heater sensor to control and monitor temperature smartly. With our controller system, it can precisely control the heater on or off and then rapidly adjust the temperature of TFT-LCD module. Also, it can reduce display power consumption. Moreover, all series of TFT-LCD module can be integrated with heater control board to make it automatic temperature controlled and would not be subjected to its maximum operating temperature range as stated in the specifications.

See Figure1 (a), it shows a stable color screen before switching. Then, it will change to Figure1 (b) after switching. This overlapped situation is due to LC’s physical characteristic that it turns slowly at low temperature. After a while, the overlapped screen will become clear; however, you can still see the shadow beneath as Figure 1 (c); Figure 1 (d) is the final result after switching.

Condition 3 : TFT LCD with Glass Heater, 9V/12V power supply, at -40℃We heat up the Glass Heater and plot the temperature as a function of time. (Figure 4 Heating Curve)

NEXT VISION DISPLAY provide different thickness of Glass Heater from 0.4 mm to 1.1mm and it can easily attach to our TFT LCD Module and IPCT (PCAP). Apart from installing convenient, it is specially designed to assure optimal quality for our clients. Using connector and supply stable current to control TFT LCD Module. (Figure 3)