ti 84 lcd screen replacement free sample

I"ve actually thought long and hard about this, and I think cemetech could probably crowdfund a production run, and then distribute it across members. I know a whole bunch of members have the same issue, and we see this kind of post all the time from people with random damaged screen issues. The thing is, most people only need 1 or 2 screens, and 500, which is a number I"ve seen thrown around more than once now, is quite a big number. Granted, we don"t need to fix 500 calculators for the purchase to be viable, but I think it would still be quite difficult to find enough buyers to break even. Also, selling some on eBay for 5-10 bucks a pop might help absorb the cost, but as an investment, I would consider it pretty wild. There is definitely a market for replacement screens, but I think the question is whether or not the market is big enough to justify buying an entire production run. Also, I"m sure the information is hiding somewhere, but it would be good to know what models use the same (or almost the same) screens. For example, I have a few ti-82s that have busted screens, but I"m not sure that it is the same screen. I"m sure I"m not the only one who has other calculator models with busted screens. Knowing if the screens would work on other models could increase the size of the pool of potential buyers significantly, making the investment more viable. I have an inkling that DrDnar might be able to enlighten me on the subject

I have a TI-84 Plus CE-T With fancy broaken LCD rainbow colors on the screen. I took it apart and after inspecting the LCD, I couldn’t find any part number markings that gave me any results on searx, aliexpress or ebay. I figured that this screen is probably using a somewhat standard protocol and pinout. Therefore I was wondering if I might be able to replace it with a simularely specced lcd from aliexpress with the same amount of pins on the connector. I ended up finding this part

The TI-84 Plus is a graphing calculator made by Texas Instruments which was released in early 2004. There is no original TI-84, only the TI-84 Plus, the TI-84 Plus Silver Edition models, and the TI-84 Plus CE. The TI-84 Plus is an enhanced version of the TI-83 Plus. The key-by-key correspondence is relatively the same, but the TI-84 features improved hardware. The archive (ROM) is about 3 times as large, and the CPU is about 2.5 times as fast (over the TI-83 and TI-83 Plus). A USB port and built-in clock functionality were also added. The USB port on the TI-84 Plus series is USB On-The-Go compliant, similar to the next generation TI-Nspire calculator, which supports connecting to USB based data collection devices and probes, and supports device to device transfers over USB rather than over the serial link port.

The TI-84 Plus Silver Edition was released in 2004 as an upgrade to the TI-83 Plus. Like the TI-83 Plus Silver Edition, it features a 15 MHz Zilog Z80 processor and 24 kB of user-available RAM. The chip has 128 kB, but Texas Instruments has not made an OS that uses all of it. Newer calculators have a RAM chip that has only 48 kB. All calculators with the letter H or later as the last letter in the serial code have fewer RAM pages, causing some programs to not run correctly.MB of user-accessible Flash ROM. Like the standard TI-84 Plus, the Silver Edition includes a built-in USB port, a built-in clock, and assembly support. It uses 4 AAA batteries and a backup button cell battery. The TI-84 Plus Silver Edition comes preloaded with a variety of applications. These programs are also available for the TI-84 Plus, but some must be downloaded separately from TI"s website. It is manufactured by Kinpo Electronics.

TI offers a special yellow version of the TI-84 Plus, inscribed with the words "School Property", for schools to loan out to students. This special design was produced in an effort to combat theft.

In 2015, Texas Instruments released the TI-84 Plus T in the Netherlands. This model is very similar to the original TI-84 Plus, but features an LED to indicate whether or not the calculator is in Exam Mode. The hardware of the TI-84 Plus T is similar to the TI-84 Plus Silver Edition, with ninety-six 16 kB pages of archive memory, for a total of 1540 kB. However, unlike the TI-84 Plus, the TI-84 Plus T does not allow users to execute assembly programs. The TI-84 Plus T has 2 different Exam Modes available with different levels of restrictiveness. The most restrictive level does not allow for any existing programs to be accessed, and does not allow any new programs to be created. This mode makes the LED blink green. The second, more moderate Exam Mode is the same, apart from three additional applications being allowed (PlySmlt2, Inequalz and Conics). This mode makes the LED blink orange.

The TI-84 Plus C Silver Edition was released in 2013 as the first Z80-based Texas Instruments graphing calculator with a color screen. It had a 320x240-pixel full-color screen, a modified version of the TI-84 Plus"s 2.55MP operating system, a removable 1200 mAh rechargeable lithium-ion battery, and keystroke compatibility with existing math and programming tools.

The TI-84 Plus CE was publicly previewed by TI Education in January 2015eZ80 processor from Zilog, making all Z80 assembly programs from the previous TI-84 Plus series calculators incompatible. The CE was introduced in multiple colors (Classic (black), Silver Linings, Radical Red, True Blue, Denim (navy blue), Lightning (light blue), Plum Pi (purple); Positively Pink (as of March 2015), Golden Ratio, and Bright White (as of June 2016) were added later), and further colors have since been released. Like the rest of the TI-84 Plus series, certain countries permit its use in examinations.English, French, German, Dutch, Portuguese, Spanish, and Swedish).

In 2016, the TI-84 Plus CE-T was released for the European educational market. The only significant difference from the CE model is the addition of an LED that blinks while the calculator is in Press-to-Test mode.

CE calculators revision M and later (manufactured on and after April 2019) contain an improved architecture, with caching with a more recent flash chip (Winbond 25Q32JVSIQ) than on previous revisions, which contained a Winbond W29GL032C. Due to this change, more recent revisions have seen a significant improvement in overall speed. In 2020, TI Education announced its decision to remove support for assembly and C programming on these calculators in response to a video posted on YouTube detailing how to bypass the test mode on OS version 5.2.2. TI"s response was widely considered unnecessary, and led to anger from users. The changes are reflected in OS version 5.5.1 for the European models and OS version 5.6 for the US models. Currently, an exploit called ArTIfiCE has been released that allows for native code execution through a bug in the CabriJR app.

The TI-84 Plus CE-T Python Edition was released in 2021 and provides OS version 5.6 and above with the ability to program the calculator in Python and includes a preloaded bundle of applications.TI-84 Plus CE Python replaced the existing TI-84 Plus CE in 2021.

There are three different types of programs which can be downloaded or programmed into the calculators: TI-BASIC, Z80 assembly language, and Flash applications (also written in Z80 assembly). The TI-84 Plus CE is different in that programs are written in TI-BASIC, eZ80 assembly language, or in the C programming language. In addition, there are programs available that are able to compile or interpret other programming languages. The TI-84 Plus CE-T Python Edition supports the Python programming language. Also, there are several languages developed by community members for the calculators, notably ICE, which is for the TI-84 Plus CE, and Axe, which is for the TI-84 Plus and TI-84 Plus SE. There are a wide range of applications that this produces, including science classes, games, calculus, and note taking (when put together with a separately sold keyboard).

The TI-84 Plus series is exactly like its predecessor in that it can be used on the SAT and ACT examinations as well as International Baccalaureate examinations. However, in some cases those administering the exam may reset the calculator"s memory beforehand to prevent cheating through the use of built-in programs or other data.

When OS 2.30 was initially released, users noticed the speed of graphing was greatly reduced. The explanation was that the update added asymptote checking in graphing.

In January 2006, Texas Instruments released v2.40 of the operating system for the TI-84 Plus series. The most noticeable addition to the new OS was the "Press-To-Test" feature that allowed a teacher to disable any programs installed on the calculator, so they cannot be used on tests, etc.

In July 2009, a community-made patch was released which allowed user-made operating systems to be easily uploaded onto the TI-84 Plus series. Shortly after the patch was developed, the RSA keys for the calculator"s operating system were factored via the General number field sieve (GNFS) algorithm, making a software patch unnecessary. In response to this, Texas Instruments released a newer hardware revision which only accepts other, stronger RSA keys, making it harder to load user-made operating systems or older TI operating systems (2.53MP and earlier). The community has found a way around the newest limitation by discovering a way to revert to older versions of the boot code.

The TI-84 Plus CE-T Python Edition supports using CircuitPython, a Python 3 variant, developed by Adafruit. Only the math and random modules are initially supported, but it is possible that wider support will become available either from TI or from the community.

Critics point out that the basic design of the TI-84 has not changed since it was released in 2004, contrary to the trend of rapid design change occurring in other areas of electronics manufacturing.

The TI-84 Plus is based heavily on its predecessor, the TI-83 Plus. As with all other calculators in the series, the TI-84 Plus supports native Z80 assembly as well as TI"s interpreted, BASIC-like language for calculators, dubbed TI-BASIC. Programming for the TI-84 Plus is nearly identical to programming for the TI-83 Plus, with a few new functions in both TI-BASIC and the calculator"s assembly support that do not exist on earlier models and OS versions. Several attempts have been made at creating a C to Zilog Z80 assembly assembler, such as SDCC.

The TI-84 Plus series calculators" dialect of TI-BASIC is the same as that of the TI-83 Plus series, but with a few more commands including ones for date and time.

Remove all AAA batteries and reinsert them according to the polarity (+ and -) diagrams. Batteries are installed upside down, then right side up, then upside-down, then right side up, which may be different from other products. After reinserting the batteries press [ON].

If the display appears blank after pressing ON adjust the contrast by pressing and releasing the [2ND] key followed by pressing and releasing [UP] arrow. Repeat a few times. Sometimes the calculator is actually ON but looks like it is not if the contrast is turned all the way down.

Remove one of the AAA batteries. Press and hold [CLEAR]. While holding [CLEAR], reinsert the AAA battery and press [ON]. The calculator should display the message "RAM Cleared". Release [CLEAR] and then press it one more time to remove the message.

Remove one of the AAA batteries. Press and hold [DEL]. While holding [DEL], reinsert the AAA battery and then press [ON]. The calculator should display "Waiting...Please install calculator software now". Follow the instructions to reinstall the calculator operating system using either a Windows computer, Mac OSX computer or Unit to Unit.

Coding is a basic literacy in the digital age, and it is important for students to understand and be able to work with the technology around them. By adding a Python version to the TI-84 Plus CE graphing family, students can learn to program using the same dedicated, distraction-free tool they are already familiar with from math classes.

Due to global supply chain challenges, the availability of the Python edition of the TI-84 Plus CE graphing calculator is very limited. Please be assured that we are working diligently to make this calculator available again. In the meantime, we are increasing production of the TI-84 Plus CE graphing calculator to support students and teachers.

A two-dimensional cellular automata program. It runs "Conway"s Game of Life" and is configurable to operate under other rule sets. Supports pic files and additional options. Please view the enclosed ReadME.txt file.

GetKey2 is an on-calc utility that returns the getkey codes for bcall(_getkey). This includes 2nd, ALPHA, and alpha (lowercase) codes for each key. Very useful for quick and easy access to a key"s _getkey equate. UPDATE: Lowercase now works!!! [2nd]+[ON] bug now fixed!!!

KeyCodes v1.1 is an on-calc scan code utility that returns the code of the button you pressed in z80 or TI-BASIC. Very useful for quick and easy access to scan codes of each key.

This program checks whether lowercase is enabled or disabled on the calculator. If it"s disabled, this program will enable it and if it"s enabled, this program will disable it. The size of Lowercase Switcher is only 114 bytes and it"s executed with Asm(prgmLWRCASE. If you have any questions, feel free to email me.

Includes several Hex programs which you can type straight into your calculator to perform functions such as turning off your calculator, making lowercase font, finding your ram, etc.

what can i say, another great program from hook programming. makes circles go 4 times faster by making them in 4 quarters. run once and it will keep your circles fast. by jeff burge of hook programing

AddAsm is both a program and FLASH application for the TI-83 Plus that allows you to run assembly programs (that do not require a shell such as MirageOS) to be run from the homescreen without using "Asm(". You just run the program as you would a BASIC program. The TI-OS will automatically insert "Asm(" for you when you press ENTER.

Take control of your TI-83 Plus with this little program. Invert text, scroll screen, fast circles, lowercase, direct byte-output to hardware ports... Have a look, even just for the source code.

This is a LCD driver fix for the 83+SE, 84+, and the 84+SE. This correct display problems that have been occuring in new model calculators. You see these problems in games like Fall Down, Desolate, Doom, and others. This fix is not for 83+, Sorry.

The TI-Keyboard is a nice accessory, but it"s impossible to navigate around all the calculator"s menus with it. Menus like the program menu and the memory menu do not have a key on the keyboard that you can use to access it. AltMenu is a solution to this. With AltMenu, you can access many more of the calculator"s menus from the TI-Keyboard itself. Simply launch the app menu with the [♦]+[`] key combo, select AltMenu, then pick the menu you wish to open. This is especially useful if you are using your calculator on a monitor like I do (via the TI-Presenter). Often I forget the calculator is even there and the light is off so I can"t see the buttons anyways, so trying to fidget around for them to open certain menus is aggravating. Which is why I made this.

This is an API to assist basic programmers. Functions the api includes are: Pausing, clearing the screen, turning off done at the end of the program, inverting the graph screen, turning off the calculator, inversing text and turning the run indicator on/off.

AppVar 1.0 is an assembly program which can be used to store data in appvars and later recalling it. this version only has 4 functions, future versions will be able to do more.

This program essentially performs a manual garbage collection that eliminates errors from your archive that can stop your calculator from turning on. Also, if some of your flash pages have enough errors that TI-OS stops using them, this will fix that and give them back to you.

Ever lost a program due to a RAM reset? a careless accidental deletion? Archive Undelete can revive your lost program(s), provided it has been archived at least once since the last Garbage Collect. It"s also smaller and easier to use than Archive Utility. Update: Fixed scrolling bug when running from MirageOS.

Archive Utility lets you extract programs and appvars from the archive without unarchiving them; a copy of the program is placed in RAM. Namely, Archive Utility provides undelete functionality for programs that have been archived at least once since the last garbage collect. The usage of Archive Utility isn"t entirely straightforward; please read the usage section of the readme before running the program.

Ascii reader is a simple program built from an unstable,unrealeased, yet promising on-calc compiler "DE, a revolutionary OOP language from the ti8x family of calcs. The program is a simple example of some early commands and the MAIN object.

ASMComp brings a bunch of tools to oncalc hex programmers. It provides the use of labels (of variable size), relative jumping calculation, equate files, string conversion, error detection and a few other things. At a little over 1000 bytes, this is pretty useful for assembly experimenters and programmers who don"t have regular access to a computer. Oh, source and equate files can be in Archive, too :) Have fun!

This is a fully functional three tile menu that is in ASM, so it is FAST. The tiles at the top and the choices can be changed to fit the preferences for your BASIC program.

Asm Pass is a password utility with optional ION protection and an SDK available. Asm Pass provides high security for your calculator by storing passwords in an AppVar file. Asm Pass has been tested thouroughly and found to be free of errors. Required for programs such as CryptoCalc and ION Lock which use the ASM Pass SDK. This program is worth a download if you want to keep your calculator secure! Less than 1K on your calc once installed. Password is stored in under 30 bytes.

Assembly gives TI-BASIC programmers shutdown, alphaloch, create an Gui, invert a part of screen, invert screen, black boarder, runindicator off and on, invert symbols on and off, shift srceen, give contrast and set contrast

The Axe Program Diagnostics Tool is an Axe utility that allows you to run diagnostics on the runtime speed of your program, analyzing relative and absolute speeds of various subroutines. The utility works by setting up an interrupt that periodically samples your program to see in which routines it is spending the most amount of time. It also traverses the stack during each call to give you even more information.

AxeSynth is a sound synthesizer for your calculator, written in Axe. It has a unique guitar-style keymapping that gives you access to over 7 octaves. Additionally, there are 6 modes of sound, various chord options and texture options to give you many many different types of sound. For a video/sound example, you can watch this: http://www.youtube.com/watch?v=Dnhp6BYenEM

A powerful base conversion utility. This converter supports any base from 2 to 36, and can handle numbers nearly 6-bytes (0 to 281474976710655) in size! Best of all, it"s undoubtedly the FASTEST base converter for the 83 Plus.

BATTERYCHECK 2.0 FOR TI83PLUS(SE) OR TI84PLUS(SE) this program shows your battery level. it displays 0 to 4, 0=poor and 4=new. run prgmBATTERY with the Asm( command found in Catalog [2nd]+[0]. update 2.0: now shows a range of 0 to 4 instead of only showing "state ok" or "state low".

Choose from any of the six programs here based on whether you want read how your batteries are doing or you want a number value. The codes have been optimised about as well as they are going to get.

I wrote Box in order to learn things about direct input and output on the ti83+, then I realized that others might learn something from it too so I posted it here. The program is draws a box, which you can move with the arrow keys, to the LCD screen. The interactions with the keys and the LCD screen are all done directly through ports. within the box folder is a box.old folder which contains the original version of the app which had some issues that I did not foresee (run both of the programs and you will see what I mean). I used spasm as the assembler (assemble with command "spasm -Li. main.asm box.8xp") but the mnemonics are common and so it would be easy to switch to other assemblers. One day I plan on writing a longer tutorial/writeup, but for now the code is heavily commented and hopefully understandable. And if anyone wants to take this program and add onto it in anyway or actually make something out of it feel free to do so, but remember that when I coded it I was not worrying about efficiency too much and so the program is quite inefficient.

In case you are in need of a braille translator (just for fun, playing Pokémon, et cetera) this assembly program gives a nice, user friendly means of doing that. This program recognizes the 26 standard letters, punctuation, and a few miscellaneous characters. ☺

BASIC Tools is a really neat set of assembly programs which can be used to allow BASIC programs to have really neat featues. BASIC Tools allows BASIC programs to inverse text, power off the calculator mid-program, change the contrast level, shift the screen up, determine the current contrast level, enable alphalock, determine the amount of free RAM, and check the batteries! Any BASIC programmer should download this!

This is a calculator locking program for ti83 plus this program is not breakable by on key run lock first set a new password and run lock your calc turns off when you turn back on a password is asked

Charz2 is the updated version of CHARS, you can now specify the row/col at which to display the char instead of having to fill the screen with spaces.

Lets you perform various low-level operations on your calculator through a simple command line interface. Use this program at your own risk. I am not responsible for any damages or loss of data.

This program uses the quartz crystals on the TI-83+SE and TI-84s to compute the effective CPU clock speed of the calculator. It does not work on a TI-83+. For the TI-84 Plus C SE version, see http://www.ticalc.org/archives/files/fileinfo/452/45250.html. Updated 31 May 2020 to support MathPrint.

This is an awesome asm utility for basic programmers. It includes 32 assembly functions that basic programmers can use. It is centered mostly upon graphical functions. Yet there are some other miscellaneous functions. I believe it is one of the most complete utilities for basic programmers.

This is a basic tool made in assembly, designed for BASIC programmers. It can be used to compile Axe source files making it primarily useful for BASIC shells, and BASIC programs utilising other apps/programs that allow them to create Axe programs from BASIC.

At a size smaller than a picture file on your calcualtor, this successor of the original CopyProg has even more functionality. It can quickly copy any variable from RAM or Archive to any other variable, but it also lets you do line reading and deleting from programs, deleting variables from RAM or Archive of any type. You can also archive/unarchive and read lines from BASIC programs. On top of that, this has full support of GetName with bugs fixed, making this program amazingly useful for large programs and BASIC shells. [update for 2.13 are fixes for a few issues with the line commands and even smaller size]

This is a collection of five programs that can encrypt/ decrypt messages quickly. It includes a program for Caesar Shift with a function that checks each setting, a program for the ADFGVX cipher, the Playfair Cipher, the Vigenere Cipher, and the Enigma Machine. Each program has fully changeable settings. Each program saves its settings on a program-created list. Included is a "defualt" group of settings for each program. Programs will not be able to encrypt/ decrypt if there is not a saved list for every setting. If you have any questions, just email me, but you should probably figure out how these codes work before asking me, it will make running the program a lot easier.

This is an Assembly program written on calculator (in hex. opcodes) with an explanation of the program in the form of a read me. This program shows one how to use the crystal timers of a Ti-84 to delay EXACT periods of time; the included prgmWAIT2 waits 2 seconds (+ a few calcutor cycles to execute the program) and can easily be modified to suit any ammount of time.

This is a pretty nice program for converting Lists and Strings. In BASIC, lists are easy to manipulate, but are huge in size. In Assembly, lists are a hassle and strings are easy. This program will convert a string to a list and visa versa. Effectively, a list will use only a ninth of the size. Full source and opcode is included. This updated version is much easier to use.

Tired of the same old default cursor in Doors CS? Then this easy-to-use, tiny and fast program is for you! Just draw an 8x8 sprite in the upper left of the screen, save it as Pic7, then run CURSOR from Doors CS! Voila, a custom cursor. This program actually modifies Doors CS itself, so the cursor will stay even when you delete prgmCURSOR and if you send the shell to other calculators. At only 120 bytes, you can"t not have this!

Direct Get Key is an asm program that basic programs can use to tell if multiple keys are being pressed. Look that the README.TXT to find more about this program.

Dislink is a program that will disable the silent linking ability of your TI-83 Plus. This means that your calculator will no longer be able to connect to a computer and sometimes other calculators. The silent link ability can easily be re-enabled by running the program again.

This program adds a function to restore your system flags (a bunch of information regarding the current state of your calculator starting at address $89F0) to a "restore point". This is useful if you ever accidentally run a buggy program that causes a minor glitch in your calculator (for example, the screen doesn"t scroll, normally small text is big, there seems to be a "shadow character" as you type, etc.) or if you"re playing with the system flags in Calcsys and want to get them back to normal quickly without clearing your RAM. A general restore point is included, but you can choose to instead save your own. Takes up hardly any space; the program itself is less than 400 bytes, and the restore point is just 77. Screenshots included.

Encrypts/decrypts Str1. Small (43 bytes), fast & reliable. The encryption is impossible to decrypt by hand. To those who noticed that version 1.0 didn"t work; sorry for the mistake, I was not so experienced in asm when I wrote it

ErrorLib works by outputting a certain error that corresponds with a number inputted into Ans. Valid inputs are 1-51, but nothing should ever cause a crash of any kind. An invalid input yields "Invalid" or "Invalid "Dim". The error values are obtainable from most copies of ti83plus.inc, but are printed here for convenience. Something to note is that there is absolutely NO program execution from either ErrorLib or the program that calls it once an error has formed. This makes for a handy alternative to Stop, but leaves annoying variables behind if you haven"t DelVar"d everything to pieces. 1 :Overflow 2 :Divide By 0 3 :Singular Mat 4 :Domain 5 :Increment 6 :Break 7 :Nonreal Ans 8 :Syntax 9 :Data Type 10:Argument 11:Dim Mismatch 12:Invalid Dim 13:Undefined 14:Memory 15:Invalid 16:Illegal Nest 17:Bound 18:Window Range 19:Zoom 20:Label 21:Stat 22:Solver 23:Singularity 24:No Sign Chng 25:Iterations 26:Bad Guess 27:Stat Plot 28:Tol Not Met 29:Reserved 30:Mode 31:Link 32:Link 33:Link 34:Link 35:Link 36:? 37:Scale 38:ID Not Found 39:No Mode 40:Validation 41:Length 42:Application 43: 44: 45:Expired 46:Bad Address 47:Archived 48:Version 49:Archive Full (It"s fancy!) 50:Variable 51:Duplicate Complete and total disclaimer? Yes.

This time, I decided to make this program user friendly. Changing system flags will be a breeze for BASIC programmers. The full (tiny) source and opcode is included.

The Flash Editor is a general-purpose hex editor for flash memory on the TI-83+, TI-83+SE, TI-84+, and TI-84+SE. It can be used to make arbitrary changes to the archive, operating system (EOS), or certificate in-system. This program is not targeted toward casual users. Substantial technical expertise is needed to use the program correctly.

Free83P is a small RAM program to update your certificate to include the community-created "0005" key which anyone can use to sign their own third-party OS. If you want to install an OS signed with the 0005 key, you just need to run this program once, and its changes will persist after all memory resets and OS transfers. Programs to backup and restore copies of your existing certificate are also included.

This program can apply Omnicalc"s font on VTI. It will be useful when testing a font or taking a screenshot. Please run this program on VTI because this program has bugs...

GetName is a program designed mostly for use with CopyProg. It simply returns some useful information about variables. For example, if you want to know the name, size, and archive status of the first program in the program menu, just send a list {0,0} through Ans. Opcode is included. 210 bytes.

Grammer is an interpreted programming language with support for sprites, drawing, math, particle effects, OS variable interaction, and much more. Heck, even gray scale can be done! If a program doesn"t work for you, try the App version about to be released!

This program provides BASIC programmers with functions for working with groups. You can read lines of programs that are in groups, you can extract variables, and you can recall pictures directly from groups, among other things.

At only 67 bytes HexToken is a program designed to easily and efficiently convert a string of hex to tokens. This is very similar to det(17 from Celtic 3. Full source and opcode included.

This program is a quick run to Hide all programs, assembly or basic, from the PRGM menu and the MEM menu. This does the same thing as other programs, such as the Mirage OS or other Program Managers, but this will quickly hide all of your programs without being prompted. It is compatible with ION, MirageOS, or plain Asm(). WARNING: THERE IS NO TOOL CONTAINED TO UN-HIDE YOUR PROGRAMS. This is meant to be used in conjunction with another program manager, and only to be used when you want to quickly hide anything, if your RAM get"s cleared or if you need to get everything hid and don"t have time to do it all manually. Being an assembly program, I cannot guarentee that it is error-free. However I have run multiple tests, and due to the low variation of program code it seems to be. However I highly recommend first archiving all important programs before your first run in case of a memory clear.

HomescreenPictures, in short, is a unique but simple program that allows you to take and recall pictures of the text on the homescreen. That"s about it. Just note that the size of the program increases with the number of pictures you want. The most recent version allows you to store the pictures into lists, which you can archive and unarchive with Basic. It is much smaller and faster.

It"s a little ASM program that gets the temperature from a FM75 I2C thermal sensor through the linkport and saves it in Ans ! (Source and schematics are included)

You can use this program to turn your calculator into a universal IR remote, with multiple profiles for each of the devices you wish to control. It has decent device support, working on 9 out of the 12 devices I have tested it with. A small handful of components (an IR LED, 38kHz IR demodulator, three resistors and a capacitor) are required to build the IR adapter. Ion and MirageOS binaries are supplied For more information, see http://www.benryves.com/products/infrared

Jade simulates a hypothetical machine, directly on your TI-83+/84+, and includes a simple Pong example. If you want a safe introduction to the world of assembly language, this is a great choice-- you can always press [ON] if you mess up!

Keyboard Lockdown is a clever little program that simply displays the blinking cursor in the upper left corner of the display (just as if you were looking at a cleared screen). However, while running, none of the keys work! It"s perfect for a little prank to fool your friends. Press ON once to exit the program and return functionality to the calculator.

this is a small pack of two keyhook programs, one makes it so that you cant do didly squat untill you drain your calc,one just inverts the screen. slowly.

This is a port of Music Reference 2.0 for the "86 with some small changes in the UI-it shows the circle of fifths, key signatures, relative keys, and NOW MUSIC THEORY INFORMATION!!!

Have you ever wanted a fast method to change multiple real variables at a time? Here you go! This program uses a list to modify consecutive real variables, making it easier to manipulate game data, for example.

This allows a BASIC programmer to read or modify a line of code, given a label offset. This means you can store user info after, say, "Lbl UD", or game data like monster names and stats after "Lbl MD". You pass LblRW the label name and the line offset, as well as the new data (if overwriting the contents).

This program reports the minimum required delay for the LCD driver on your 83+/83+ SE/84+/84+ SE. It will auto-detect in the range of 25 to 65400 t-states.

Psst, hey kid: You wanna sort a list very quickly? Well, that"s what this program does! On my 84+ it sorts a 999 element list in 1.1 seconds. TI-OS takes over 55 seconds. **Great improvements over the original! Now it is only 200 bytes, fixes a bug with negative numbers, it is slightly faster, takes advantage of 15MHz mode, and no longer needs additional free RAM.

Activates lowercase writing on your ti-83+ (only). Open, run with the Asm( command, and then you can uninstall it and still have lowercase. Lowercase typing can be removed by running the program again. Back to BASIC

Melt is the ultimate addition to your basic program. The effect "Melt" can be seen in the latest release of bust a move. It adds a cool affect to any basic program. Try it today!

MemSync is a small utility to help work around a problem with OmniCalc"s VirtualCalc function. Visit http://www.detachedsolutions.com/forum/viewtopic.php?t=2426 for more information on its internals.

The latest release of mobileTunes takes advantage of Ben Ryves" QuadPlay routines combined with the GUI power of Doors CS 7 for a superior media experience. Play up to 4-channel MOD music and audio on your calculator through the I/O port while taking advantage of Doors CS"s ability to open songs in the associated player simply by clicking on the song. Four sample songs are included plus documentation on how to make your own manually or using the Cemetech MIDI-to-mt3 converter (see readme). This version fixes Nspire compatibility.

MultiKeys is a useful little program that can check for up to 8 keypresses at one time. That"s almost impractical... Have fun! Oh, this new version has a special feature to test all of the keys, not just eight at a time.

NoExec is a TI-83/84 Plus assembly program that prevents execution of all other programs/applications by way of a RawKey and parser hook. Its purpose is to make sure the calculator is secure and cannot run games or other troublesome programs.

Always wanted an asm program that can do all specific asm stuff. Now this is one! It includes 41 functions as: lock, hide, invert screen, ON break off,... And many more. This is currently the best asm program a basic programmer can use. If you use it in your progs, you must add me in credits.

This is a buffer overflow exploit for the 83+/84+ series boot code to allow transferring a program remotely to a bricked, OS-less calculator and execute it. This is extremely useful if you have corrupted the certificate beyond repair and have no ability to install an OS; you can use this program on a second I/O-connected 83+/84+ series calculator and transfer executable code to it which can be used to unbrick it. It includes a simple code file which you can modify yourself and assemble with TASM or similar with any code you like, so it"s very flexible.

Photographic Long Exposure & Time-Lapse Timer (PLET) is a program that allows one to control many cameras from the calculator. Additionally, PLET has timing features which facilitate performing long exposures and time-lapse photography. This is possible because the serial port on the TI-83+/SE and the TI-84+/SE is similar to the remote port on some Canon most Pentax dSLR models.

What"s more exciting that moving a lowercase "p" around the screen and controlling its speed? Lots. But this program is an ok example if you"re trying to figure out assembly.

This version of PortEditor is more user friendly and a little more memory friendly. Reading or writing to a port can cause some neat effects, but care should be taken. The full source and opcode is included.

PRGMAPPV is a tool which lets you make appvars copies of programs and conversely, as well as (un)locking programs against edition and (un)archiving any program or appvar on your calculator. It"s easy to use and weights 567 bytes.

PRGMHIDE is a tool to hide programs from the OS menus (PRGM, EDIT, MEMORY). It"s useful if you have plenty of programs: you can use it to hide programs you don"t use often, and make them visible again only when you need them. This tool can also (un)lock programs against edition. It"s easy to use and weights 488 bytes.

This is the version 1.00 of TokenHex. It is still mightly useful to programmers as it converts programs and appvars to hex instead of a string. Want to dissa-, err, convert an assembly program to hex? Here you go.

This program takes advantage of the fact that program objects and application variable objects have the exact same data structure. This make them completely interchangable. By a simple manipulation of it"s vat entry it can be turned into an application variable. Great for hiding programs for the prog menu.

Some little programs to hide/unhide and lock/unlock your calc programs. It features a program-to-appvar converter too. Any optimizations welcome, should not contain bugs.

These programs are meant to be used with Program Tools v1.2 by David Lindstrom. However, they can be used by themself. The first program stores the size of the program(whose name is in Str0) into theta, the archive state of the program into X, and the locked state of the program into Y. The second program stores if the program is ASM or BASIC into T. These programs will check the state of archived or unarchived programs. Read the readme for more information. Update v1.1: Fixed 2 bugs (x was always equal to one and the type didn"t work for archived programs). Also, these programs have been optimized for size and speed.

Every BASIC programmer"s dream is here! Now even more flexible and stable. This set of assembler programs allows you to run archived programs, (un)archive, (un)lock, delete and list other programs from TI-BASIC program. It is now split in three modules: ZRUN, PTOOLS, ZLIST. I also have size optimized these programs.

The third version of my ptt patch. It erases the evil part of the Push-to-Test code from the TI-84 Plus OS. Afterwards it only displays an option screen and a fake "reset complete". Hooks are preserved, groups and pics too, and programs remain undisabled. OS version 2.53 only.

The second version of my ptt patch. It erases the evil part of the Push-to-Test code from the TI-84 Plus OS. Afterwards it only displays an option screen and a fake "reset complete". Hooks are preserved, groups and pics too, and programs remain undisabled. OS version 2.43 only. Changelog: - FlashDrv is not needed anymore - Version check for fool-proofness

This program, for Doors CS v4.8 and higher, will install a Shell Expansion (SE) that protects your programs from unauthorized users. Once installed, takes up a mere 100 bytes of memory; now completely debugged and optimized! Check it out. Now compatible with all TI-83(+) and TI-84+ type calculators.

This is another security program for your calculator. The special thing about this one is it has a (limited) take-out-battery-to-reset-ram-and-delete-security-proofidity. It turns off you calc between key inputs, so the oppressor has virtually no time to pull out the batteries. Yes, this method of reseting the ram works on most security programs, including MirageOS. So mine is better. Ha. Also comes in a fake Ion prgmA and prgm(theta)Ion. If you use another shell, and someone grabs your calc when you have it on they may try to run prgmA to get to your games, but it"ll shut you calc off, so Ha! And if you use Ion then I have a prgmPW instead. Enjoy!

This program is an amazingly simple, small, and fast alternative to BASIC"s getKey command. There is no delay between keypresses and each key will repeat like the arrows or del key. The tiny opcode is included. For real this time. I had not realised it wasn"t part of the folder I uploaded.

Control other calculators with this really quite useless program. It installs as a keyhook, so that any key you press is automatically passed onto the remote calculator. The truly funky thing is that no extra code is required on the remote calculator! It will serve no useful purpose, but it quite cool nonetheless.

This routine is very useful for everyone. You can save a lot of free RAM memory when using Resource. It copies programs (TI-Basic and Asm) to RAM from Archive; so they only need free RAM when they are running! The routine could be used within TI-Basic programs or stand-alone at home screen! (Bug fixed)

RLIB gives TI-BASIC programmers access to the built-in rectangle drawing routines on the calculator. This program could be used for creating incredible effects, which is good for games in particular. RLIB can draw filled, cleared and inverted rectangles, as well as drawing and clearing rectangular borders.

Finally, an assembly key getter that is completely protected from [ON] breaks! A useful tool for BASIC password protection programs, as well as anywhere you want a robust key routine.

This file contains 9000+ definitions for common SAT vocabulary terms. It has one driver program and 61 data files, all of which must be sent to the calculator to run. This is for educational purposes only, please do not use for cheating.

SAVEEDIT is an assembly program whith which you can edit and study calculators RAM pretty easily. It allows you to give in a certain appvar, a normal variable, a program or just a location in RAM, and the program will search where it is located in RAM. You can scroll through the RAM and see the value of every byte at every location in both decimal and character form. And above all of that, it allows you to change it! It also shows you where the "safe area" is, which part belongs to the variable/program you asked for. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!WARNING!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I"m not responsible for any possible damage that editing RAM will cause to your calculator, use at own risk!

ScreenDump is meant specifically for people who do on the calc assembly. It will convert all the data at plotSScreen and convert it to a hex string. This can then be inserted into a program allowing your ASM programs to hold detailed splah screens.

ScreenShot lets you take a shot of any screen and puts it on the graph screen. Want to save the image of your program code to play with later? Have at it. This really only provides a little fun (and maybe you can mess with people, too). Have fun.

Scrolling Menu Plus is a mimic of the menus built into the TI-83/84 plus meant for use with TI-BASIC programs. It uses a string stored in Ans to make a menu and outputs the ASCII code of the selected option. You can also now use the left and right arrows to switch between menus. If you do end up using this as part of a TI-BASIC program, please acknowledge me and this program. v1.1.1

Use Sentry to block the MEM, PRGM and APPS menus on your calculator with a 4-digit code on each! Since it is written in ASM there are no [ON] key bypasses! You can set it to lock any (or many) of the three by selecting manually which you"d like to block. Simple to set up and use.

SetUpEditor is one of the most useful commands to BASIC programmers and I have always griped that I could not use it for other variable types like strings and matrices. Guess what I did? Now you can avoid those errors with matrices or strings not existing or being archived just like you can with lists!

This program is a TSR (terminate and stays resident) that displays the current angle (degree/radian) and decimal (float/fix) modes on the screen at all times. It is a bit temperamental, so it may be deactivated for no apparant reason. It should not severally crash the calculator however.

Smart Edit Is a text Viewer/Editor for Ti83+/84+ it lets you write small or big, capital or not, normal or reversed video, and let you access to all char of Ti83+.

This software allows you to turn your calculator into an IR remote control for devices using Sony"s infrared remote control protocol, SIRCS. You can easily create your own layouts on the calculator. Hardware requirements are basic - all you need is an IR LED to transmit, and an optional demodulator module can be used to receive. Ion and MirageOS binaries are supplied, as well as layout files for a conventional TV, VCR and the PlayStation 2"s DVD remote control. For more information, visit http://www.benryves.com/products/sonyir

This program is much like the one above except it is extremely compact and uses self modifying code. Counts from 0-36000 something and the source code is very easy to understand. Better than any previous counting programs!

This is a program that counts. It either goes up from 0, or down from 65535. I made it to show how fast assembly is, but it is still pretty cool! If you make a program like it in BASIC, you will notice that it isn"t anywhere near as fast. Hope you like it!

Sprite & Tile Maker est un programme qui vous permet de créer vos propres sprites directement sur votre calculatrice. Il est compilée grâce au langage de programmation Axe Parser.

This program uses quartz crystal timers on the TI-83+SE and TI-84s to make a highly accurate stopwatch, useful for scientific purposes in the classroom. The program can automatically save data to a list. It can also be configured to monitor the link port so external parts of an experiment can trigger data points to be recorded. The hardware interface is very simple.

Finally a symbol-program which uses a handy overview to select the symbols you want! No fuss no muss, select the symbols you want, +ENTER stores it in Str0. Symbols also got an option to (re)set lowercase. Press +ALPHA! You can open this program with Asm( or a shell (like MirageOS).

This program allows you to write and compile assembly programs directly on your Ti! It uses the normal TI-OS Editor to write asm-programs. This a new version of my program which is faster and smaller. It contains every comandstyle of asm except relative adressing.

This is a password pretection program for TI-83+ that is almost imposible to get by unless you have the password. You can set your own password of 6 buttons. You should have the TI Startup app if you plan to make any use of this.

This is a continuation of TI-Guitar and contains a Trumpet, Piano, and Guitar. Made with Axe. Drums will be added soon. TI-Band has a forum topic! Just go here: http://www.cemetech.net/forum/viewtopic.php?t=9233.

TiDoc is the follow-up of TiWord v1.0, my first text editing program for the calculator. This time, one cannot edit the documents directly from the calculator but only on the PC. However, new functionalities were added: text centering, colors inversion, and especially: insertion of pictures! Thus, TiDoc allows you to make real documents for your calculator that can be quickly viewed at any moment.

For the 83+ Silver Edition only, this program uses the timers available in the SE to make an extremely accurate countup stopwatch. This has been tested to 0.67 second accuracy after 24 hours of running.

Well this is one of my more specific programs (meant to be used in conjunction with KeyChar) that will convert a token to its individual ASCII characters.

Token reader is a simple program built from an unstable,unrealeased, yet promising on-calc compiler "DE, a revolutionary OOP language from the ti8x family of calcs. The program is a simple example of some early commands and the MAIN object.

This program lets you copy your programs-- archived or not-- to a temp program. Temp programs are automatically deleted by the OS at the end of your program, so these are great for massive game packs or programs with lots of subprograms that don"t all need to be in RAM. Because it copies your programs from Flash to RAM, it saves your flash chip a little and because it is assembly, it is fast.

This program allows you to downgrade your calculator from OS 2.55. If you bought your calculator after August 2011, most likely your boot code (1.03) will not allow you to downgrade. This program applies a patch that will let you install any operating system you like, including 2.43. This program also allows you to put you name on the about screen.

This is collection of to useful programs for checking variables/Ans. VarTest for see if a variable exist, is in RAM or is archived and if it holds any data. AnsType to get out the type of Ans (without affecting Ans) Created by Johan Rydh (jrydh@hotmail.com) These programs are based on an idea from dragonscale.matt@gmail.com

This program conjugates the french verbs être (to be), avoir (to have), aller (to go), commencer (to begin), suivre (to follow) and it shows the prefixes of the regular verbs with ...er in présent, passé composé, imparfait, futur simple and conditional présent It"s in ASM with inverse headlines and faster than basic conjugate progs.

This is a viewer for TI-83+. It permits you to watch your pictures (PIC1 to PIC8) even if they are archived ! With this viewer, you can also archive/unarchive and even delete the picture you"re watching ! It is a good and light program (about 500 bytes when compiled) which you can include if you"re making an OS for TI-83+ ! (source is included). Notice that there isn"t any advertising in it (contrary to what I"m used to do ;)

This program allows the user to view the calc"s registers on the fly by using interrupt mode 2. It gives the user an approximate idea to what the calc is doing at the time. Run this program using the "asm(" option found under the catalog key

two prgrams. displays each byte of your memory from $0000 to $FFFF until you press clear. the other is the same except it has no clear to exit, and after a while it messes up and does something random and WAYCOOL!!!!!!! YAY!!!!111!!11!11111oneone If you"re not into crashing your calculator, run the non-crashing program and watch the pretty patterns!!!!!!!!111!!11!!1!!1!11111 YAY!!!!!!!!!!!!1111111111111!!!111111111!1!!11111ONEONEONEoneoneone one11!!!!!11!!!one

XXEdit (aXe heX Editor) is the evolution of my old Axe Memory Mapper. It is a comprehensive memory mapper and editor for the z80 series, designed to be a superfunctional form of Calcsys" hex editor. It is highly useful for helping debug Axe and assembly programs on calc. Features: Memory bank switching Display of addresses in hex, decimal, and in the form of pointer+offest Quick access to L1 (saveSScreen), L2 (StatVars), L3 (appBackUpScreen), L4 (tempSwapArea), L5 (textShadow), L6 (plotSScreen), $4000 (the start of Flash), and $8000 (the start of RAM and appData); Display of byte in hex, binary, decimal, ascii, the two byte number at that point, and the 8x8 sprite of the 8 bytes at the cursor position; Jumping to the currently highlighted two byte address; Jumping to any user defined hex address Search for any 8 byte string. Accepts input in both hex and ascii; Search for any program/protected program/appvar in RAM or archive. Edit up to 8 bytes at a time of current cursor position, input accepted as hex or ASCII; Edit via sprite editing of the 8 bytes at the current cursor position; and probably something else I forgot...

z80 Decompiler is a tool to do the complete opposite of the AsmComp() command. It simply undos a compilation of a z80 program. No, this does not turn it back from "C9" to "ret" or "sinh⁻ֿ¹(" to "ret", it actually does "sinh⁻ֿ¹(" to "C9". This isn"t as fast as AsmComp() because it compiles the whole program at once. This does it line-by-line, becase some of the routine is in TI-BASIC.

This is another assembly that BASIC programmers can use. It includes the standard functions (disable run-indicator, check free RAM, etc) and something new: determine whether or not your calculator is Silver Edition or not! Examples of this use is within BASIC games that need smooth graphics for both 83p versions because of the faster hardware in the Silver Edition. Note: If you only want the function that determines whether or not your calculator is Silver Edition or not, download ZCALCVER by finding it in my author page.

ZBASIC is a set of 10 ASM routines which BASIC programs can access and use. These include inverting the screen, getting free RAM amount, setting/checking contrast level, getting battery status, shifting the screen up, etc.

This program, in 29 bytes, will determine the hardware version of your calculator, whether it be 83+/SE or 84+/SE! Useful in, for example, games that require smooth graphics (BASIC RPGs comes into mind) between the 4 calculators because the 83+SE and 84+/SE has a faster CPU than the 83+.

ZCom is a communication routine for Basic programs. It can transfer real/complex variables, real/complex lists, matrixes and strings between TI-83 Plus and TI-84 Plus calculators, at a speed around 1.22 kB/s trough the I/O port! (The USB port does not work.) This routine is 100% compatible with: the TI-83 Plus, the TI-83 Plus Silver Edition, the TI-84 Plus and the TI-84 Plus Silver Edition This routine is made to replace the communication routine built-in in Basic, that often doesn"t work. This routine should always work!

ZCom is a communication routine for Basic programs and games. It can transfer real/complex variables and lists, matrixes, strings and pictures (new from v2.10) between TI-83 Plus and TI-84 Plus calculators. This version supports now the USB port! The USB port speed is around 2-3 kB/s; the I/O port speed is around 1.2 kB/s. ZCom v2.11 is compatible with the syntax of v2.10 and v2.00; you should replace the earlier version with this version.

This program will copy any program, BASIC or assembly, archived or unarchived, into a temporary program for ease of execution. Useful if you have several archived programs that need to be conditionally ran at the fastest speed possible.

DOS for the ti83plus. Contains several interesting functions like: lock/unlock programs, archive/unarchive, check the condition of the batteries, run programs and more. I"ve fixed all bugs now.

ZFlash is a simple program that many BASIC programmers have been requesting for a long time. This program allows basic programmers to archive and unarchive programs from within their programs. A must for large games! Bug fix, updated README.

This is simply a program that mimics the GetCalc() function in BASIC. You may be wondering why you would want an assembly program to do this. Well, have you programmers who use the linkport notice that sometimes the GetCalc() doesn"t work and if it did, how the heck will you (not to mention the program) know that it did or didn"t? You don"t know (you could guess with For() loops), but if you want to be absolutely sure, then this is for you! Note that it is limited in that it can only GetCalc() the Ans variable, but I plan on removing the limitation, once I know how, so expect an update soon.

zHide is a tool that allows you to hide a program which has the name in Str0. A hidden program won"t appear in any menu of the calculator, EXEC, EDIT, SEND, MEM ... until you unhide it using the second program, zUnhide. Works on all z80, readme included.

Thats right store the number whose length you want to find to variable W and send the asm routine the length is then put into W. Then length returned is the number of "spaces" a number would take up in decimal format including decimal points and negative signs. Extremely easy to use just check out the screenshots. They also give you an idea of what is possible with this routine.

This program sets the calculator into interrupt mode 2 and makes it so every time you press the LN key the calculator will turn off and the only way to turn it back on is by pressing LOG.

ZToolPack is a small collection of useful and small assembly programs that I have made. In this collection you will find: ASMCall-Allows you to use asm hex codes in a BASIC program BSprt-Draw 8x8 sprites using X,Y and a hex string CopyProg-Copies variables from RAM or Archive to another var DataString-Converts a list to a string or visa versa DataType-Change variables to another type. Ex.: Pic to Str ListToReal-Copies list elements to real vars MultiGraphs-Manipulate 16 graphs/pics without using user RAM MultiPics-Manipulate any of 256 pictures with 6 functions Xtra-Get hacked vars and tokens (like Greek alphabet)

Antigua and Barbuda, Aruba, Australia, Austria, Bahamas, Bahrain, Bangladesh, Barbados, Belgium, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Bulgaria, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, French Guiana, Germany, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Hungary, Iceland, Indonesia, Ireland, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Korea, South, Kuwait, Latvia, Liechtenstein, Lithuania, Luxembourg, Macau, Malaysia, Maldives, Malta, Martinique, Mexico, Monaco, Montserrat, Netherlands, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Reunion, Romania, Saint Kitts-Nevis, Saint Lucia, Saudi Arabia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Islands, United Arab Emirates, United Kingdom, United States, Vietnam

We recommend starting with the CPU because it determines most of your component choices. Your motherboard, RAM, and even your need for a graphics card all hinge on what CPU you choose. This is why choosing an Intel or AMD CPU is the first and most critical step of your PC building journey.

When choosing the size of your PC here are some things to keep in mind. Small form factor PC"s present some limitations on the components you can use in your PC and, given their size, introduce build challenges. ATX or mid-sized PCs are the most common builds and provide the largest compatibility options. They are also among the easiest PCs to assemble. Finally, E-ATX provides far more options and power but the size of the PC can be daunting and will take up a lot of space. This is often the most costly build option.

The amount of RAM your computer needs depends on what you plan on using it for. At a minimum we would recommend no less than 8GB of RAM, but if you are only using your PC for simple daily tasks, like web browsing, you might be able to get away with as little as 4GB. If you are gaming then 16GB is going to be the minimum and if you are streaming or video editing then 32GB is recommended. For more information on this, read our RAM buying guide on Newegg Insider.

PC building is no more difficult than completing a Lego set or building a piece of furniture given you have compatible components. There are so many amazing guides available on online on platforms like YouTube that will take you step by step through the pc builing process. We also recommend joining a PC community like the Newegg Discord that can help you answer questions as they may come up. For informaiton on this topics, we recommend you review our PC building guide and are familiar with the step-by-step process.

We recommend a number 2 phillips head screwdriver preferably magnetic. If you are going to build on carpet or in an area prone to static then an anti-static bracelet is also highly recommended. It is also a good idea to pick up thermal paste and some isopropyl alcohol as well. Finally, zip ties or velcro cable ties come in handy when you are managing cables.