best way to clean lcd panel supplier

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

Things to consider before cleaning or handling an electronic displayAvoid static by grounding your body and following proper ESD-safe handling techniques.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Isopropyl alcohol (IPA) is widely used to clean printed circuit boards (PCBs). Use a Q-tip or soft small bristle brush for scrubbing a PCB, and never use a paintbrush.Gently rub a Q-tip in Isopropyl alcohol.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

Industrial LCD displays and computer monitors are generally very low maintenance, but they do need a good cleaning every once in a while to make the viewing experience more enjoyable and extend their lifespan. But it’s important that you learn the proper ways to clean LCD screens to avoid damaging them in the process. Keep reading to learn how to clean a monitor screen the right way, so that you can get the most use out of it and remove smudges, dirt, and germs.

Cleaning your computer screen the wrong way could actually damage it and lead to expensive repairs or replacements. To avoid this type of headache, here are some tips on how to clean a monitor screen the right way.

Computers usually come with special care instructions from the manufacturers that explain in detail the proper ways to care for your device and keep it clean. Before setting up your device, make sure to read through the care instructions carefully and follow them closely. If you have any questions or need further assistance, you can contact the manufacturer directly.

Make sure to turn the monitor off before you start cleaning it as wiping it with a damp cloth while it’s on can damage the pixels. Plus, it’s easier to see the dust, smudges, and dust particles when the screen is off and completely black. That way, you can make sure you get a thorough clean without damaging the screen. Turning off touchscreen devices before cleaning is also highly recommended so you can avoid accidental touches that perform the wrong actions or functions.

LCD screens have protective anti-glare and anti-reflective coatings on them to improve visibility. Touchscreens also have oleophobic coatings that prevent fingerprint oil smudges from appearing on the screen. Store-bought glass cleaners contain harsh chemicals such as alcohol and ammonia, which can penetrate the surface of the screen and severely damage its internal mechanism after wearing down the protective coatings. It’s best to stay away from using household cleaners on your industrial LCD displays unless you have the greenlight from the manufacturer.

Canned air is incredibly effective at blasting away dust particles, crumbs, hairs, and any other organic materials that can become stuck to your screen or lodged between the keys on your keyboard. This prevents the particles from scratching the surface of the screen.

If blasting the screen with canned air or wiping it down with a microfiber cloth doesn’t work, then your next best option is cleaning it with distilled water. Unlike tap water, distilled water isn’t fortified with mineral deposits that can scratch or damage industrial display monitors. Many manufacturers advise against spraying the water directly onto the screen for obvious reasons. Instead, spray a small amount onto a microfiber cloth until it’s just damp and gently spot wipe the parts of the display that need it.

Some manufacturers of industrial computer monitors also sell special screen cleaners that are meant to go along with their products. If you’re lucky, they might even be included with your original purchase. These are light cleaning solutions that effectively remove dirt, grime, and dust from your screen for optimal functionality and usability. After applying a cleaning solution to your screen, make sure to let it dry completely before resuming usage. Otherwise, you’re just going to smudge the screen again if it’s a touchscreen.

For more tips on how to clean a monitor screen and keep it in tiptop shape, contact Nauticomp Inc. We’re one of the leading suppliers of industrial computer monitors and displays around the globe.

Keeping your precious rugged LCD monitors or LED screens clean and tidy can be challenging. This is especially true if you happen to have handsy young children who like to touch everything or pets running amuck in your household or even if you happen to work in a particularly messy environment such as a construction site or restaurant. Sometimes, rogue bits of debris can attach themselves to your electronic devices and while this is entirely out of your control for the most part, there are a few effective and harmless cleaning solutions you can put into practice to keep your electronics clean and running smoothly. Continue reading to learn about helpful tips for cleaning your LCD and LED screens without causing internal or external damage.

Before you can get down to the cleaning part, you need to prepare your LCD or LED screen in order to reduce the risk of liquids penetrating the surface and causing internal damage. Keep in mind that modern screens might technically include higher end features than the old school CRT screens from your childhood, but that doesn’t necessarily mean they’re more durable. In fact, modern LCD and LED screens are actually a lot more fragile and easily susceptible to damage if they’re not cared for properly. To prepare the screen for cleaning, make sure you shut down the system entirely, disconnect it from its power source, and then let it cool down for a few minutes. This will reduce the risk of electrocution and it’ll make it easier to clean the screen without resulting in annoying and unattractive streaks.

Occasionally, you’ll have to contend with a tough spot, streak, or fingerprint marking that takes a little extra effort to clean. If this happens, don’t panic and definitely don’t press down harder with a cloth or try to scrape it off with your fingernails or any other tool as this can cause severe damage to the top layer or anti-gloss coating. The best thing to do is use a non-abrasive cleaning solution such as isopropyl alcohol that’s diluted with either pure or distilled water. Spray the solution onto a microfiber cloth and gently wipe down the area in either an up and down or side to side motion. Applying too much pressure to even the most rugged touchscreen can compromise its limited durability.

There are a few types of cleaning cloths you can use to wipe down your rugged LCD monitor either at home or at work. The most recommended one is microfiber cloth for a multitude of reasons. First, microfiber is a state-of-the-art technological development that’s a thin and soft, yet strong enough material to thoroughly clean your electronic devices without risking damaging them in any way. Most of the time, computer and flatscreen TV manufacturers provide microfiber cloths with their products along with a specific set of maintenance and cleaning instructions. Microfiber cloths are immune to collecting or spreading lint across your screen, and because of the intricate way in which the minuscule fibers are intertwined these cloths are able to trap larger quantities of dirt and dust without leaving streaks. You can also use a cotton tea towel, a cotton t-shirt, or cotton handkerchief if you’re in a bind and don’t have microfiber cloths on hand.

This point can’t be emphasized enough. Even though it may seem like common sense that electronic devices shouldn’t come into direct contact with any liquids (especially if they’re still plugged in), not everyone seems to think so and many people have made the mistake of spraying cleaning agents onto their devices. The safer and smarter way to clean any rackmount LCD display is by first wiping it down with a dry cloth and then spraying a small amount of the cleaning solution onto a different cloth and wiping it down gently. After you do this, wipe it down with a clean dry cloth to remove any remaining liquid.

Always avoid using ammonia or rubbing alcohol based cleaners on your touchscreen devices. The devices themselves might be constructed with the capability to withstand most types of damages, but certain features they possess aren’t. Ammonia and rubbing alcohol can irreparably strip away or damage the extremely delicate anti-glare coating on the screen, which will not only negatively alter your viewing experience but also make your device a lot harder to use in strong sunlight.

Dust that settles between the gaps in the screen where the bezel and the top layer of glass or plastic meet can penetrate deeper and cause internal damage to your device. Regularly using a vacuum with a soft-bristled brush (to prevent scratching) can help you keep your device clean and free of any issues.

For extra measure, you can also spray the surface of your screen, computer keyboard, or even the vent on the back of the device with a can of compressed air to blast away any lingering and stubborn debris or dust. If any of it lands on the surface of the device, make sure to gently wipe it away with a clean cloth to prevent it from making its way back into your device. Implementing this cleaning method on a regular basis will ultimately help to guarantee the longevity and functionality of your device.

Nauticomp Inc. is the proud designer, manufacturer and distributor of countless rugged LCD and LED monitors and displays. We’ve been working in the technological industry for more than 20 years and supply a variety of businesses including marine bases, military bases, restaurants, casinos, retail stores, shopping centers, and healthcare facilities with durable and high-quality LED and LCD displays that serve a wide range of purposes. For more information about our company or our products, please feel free to contact us.

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

Screens can scratch easily, and even paper towels and tissues contain fibers that can do damage. “Your best bet is to use a soft, anti-static microfiber cloth—the kind used to clean eyeglasses and camera lenses—and wipe in a circular motion,” says John Walsh, who cleans more than 250 TVs a year in his role as a CR photographer. (Some TV manufacturers will include a cloth for this purpose.) “Gently wipe the screen with a dry cloth to remove dust and other debris, but don’t press too hard,” he says.

You may also want to wipe down the TV’s cabinet, and make sure dust isn’t clogging the vents that help dissipate heat. If the TV is on a stand and not tethered to the wall, Walsh suggests cleaning with one hand while supporting the TV with the other to prevent the set from tipping over. However, CR strongly recommends anchoring all stand-mounted TVs using anti-tipping straps designed for this purpose.

If there are hard-to-remove stains, you can dampen the cloth slightly with distilled water and gently clean the screen. Don’t spray water directly onto the screen; that could cause a shock or component failure if water seeps into the inner workings of the set.

For the most stubborn stains, you can try using a solution of very mild dish soap highly diluted with water, once again applied to the cloth and not to the TV itself. (As a guideline, Panasonic used to recommend a 100:1 ratio of water to soap.) LCD screens, in particular, are very sensitive to pressure and can scratch easily, so don’t press hard.

As the weather warms, it"s time for everyone"s "favorite" pastime: spring cleaning. While you"re dusting off the shelves and shoveling out a winter"s worth of detritus, spare a moment to check your TV. Dust and grime can accumulate there, and over time it can become more and more noticeable. And if you have children, there may be an array of fingerprints and other smears on the screen.

The short version? Don"t use liquids, don"t press too hard, don"t use any traditional cleaners. Microfiber cloths are good, but be gentle. Modern TVs are predominantly plastic and therefore far easier to scratch than windows or your phone.

Want the longer version? Here"s what the top TV manufacturers say about cleaning their screens:Cleaning your 4K, OLED, or LED TV screen with a soft, dry cloth is recommended. The goal here is to avoid scratching the screen. Gentle, circular motions tend to give better results, since the circular motion hits each area from several angles in a single swipe.

To clean the frame and screen, gently wipe it with a microfiber cleaning cloth. Make sure to wipe the TV frame and screen as gently as possible. TV screens are fragile and can be damaged when pressed too hard.

Important: Never use any type of window cleaner, soap, scouring powder, wax, or any cleanser with solvents such as alcohol, benzene, ammonia, or acetone. Never use abrasive pads or paper towels. If you do, you can scratch the screen or strip the anti-glare coating off the screen and cause permanent damage. Never spray water directly onto the TV. Make sure to wipe the TV as gently as possible. TV screens are fragile and can be damaged when pressed too hard.Gently wipe the screen or the exterior with a dry, soft cloth, such as an eyeglass cleaner.

For inks from oil markers on the screen, soak a cloth in a non-soap synthetic cleanser diluted (by less than 1% ) with water. Squeeze the cloth tightly to eliminate excess liquid, then wipe gently to remove the ink. Use non-soap cleansers cautiously because it may cause environmental problems when disposed improperly.

So why not Windex? Regular Windex is formulated for glass windows, plus a few other surfaces. It contains ammonia and alcohol, not the friendliest of chemicals. S. C. Johnson doesn"t explicitly say not to use Windex on TVs, but it offers Windex Electronics wipes and cleaners, so infer what you will. The better screen cleaners will clearly state that they do not contain alcohol or ammonia.

At last count, I found a billion companies making TV screen cleaners. Almost all of these are something like 99 percent water, 1 percent other stuff. Years ago I tested a handful and found them, on average, to work well enough. If you don"t have luck with a simple cloth and possibly distilled water, a screen cleaner is worth a try, and as a bonus you can also use it for your laptop, tablet and cell phone screens. Plus, they come with a microfiber cloth. If they don"t clearly state they don"t contain alcohol and ammonia, however, I would skip them.

So yeah, cleaning your TV is a good idea. But just remember that they"re exceptionally fragile. Why risk marring their surface by using cleaning methods the companies themselves don"t advise? If you damage your screen with cleaners, you won"t be able to fix it.

My advice? Get a nice microfiber cloth (if your TV didn"t come with one), and use that. If that doesn"t fix your smudges, try a cloth moist with water. Don"t press too hard. There"s less than a millimeter between your finger and a broken TV.

Screen cleaning kits are fine, though most people won"t need them. Remember, like all TV accessories, the store is selling them because they probably make more profit on that $20 kit than on a $500 TV.

As well as covering TV and other display tech, Geoff does photo tours of cool museums and locations around the world, including nuclear submarines, massive aircraft carriers, medieval castles, epic 10,000 mile road trips, and more. Check out Tech Treks for all his tours and adventures.

He wrote a bestselling sci-fi novel about city-size submarines, along with a sequel. You can follow his adventures on Instagram and his YouTube channel.

Even if you don"t have snot-nosed kids or wet-nosed pets, your computer monitor or HDTV panel will eventually accumulate a collection of annoying smudges and stains. My household happens to contain both of the aforementioned creatures and, thus, I"ve developed a method for wiping down the HDTV in the living room and the LCD monitor in my office, as well as the screen of my laptop and iPad.

If you take a quick survey of LCD or HDTV manufacturers about the recommended method for cleaning the surface of your monitor or TV screen, you"ll discover more don"ts than dos, often in conflict with one another.

First, attempt to clean your screen with a dry, lint-free cloth. If you can"t find the cleaning cloth that came with your screen in question, then it"s likely you have one laying around from a laptop, iPad, or iPhone purchase.

After removing any dust from your screen with a dry cloth, dip the other cloth in your dish soap solution, wring it out, and gently wipe your display. Next, rinse out your soapy cloth, wring it out again, and wipe your display to remove any soap residue. Finally, take your dry cloth and wipe the display to remove any streaking.

Editors" note:It"s time for spring cleaning! Week"s two"s theme: physical cleaning.Check backevery day this week to see how best to keep dirt, grime, crumbs, and other annoying bits off your devices. And be sure to return next week for more spring cleaning tips and tricks.

Use a non abrasive cleaning solution, diluting isopropyl alcohol (not rubbing alcohol, as it may contain oil) into a solution of 50% alcohol and 50% with distilled water water (or purified/bottled water). You could also buy a cleaning solution that does not contain bleach, ammonia, or vinegar.

Before you start, power-off and unplug your monitor. Spray the cleaning solution on a soft cloth (for example an old T-shirt), lint-free microfiber cloth, or some other very soft cloth. A large cloth is best, since it will help reducing the risk of leaving streaks across the display from finger pressure.

Starting from the top, wipe the screen in one direction until you have cleaned the entire screen. Apply light, but distributed pressure. Repeat if necessary. Let it air dry.

I used yet another clean cloth and that seemed to get rid of everything. Re-assembled the phone and the touch screen works and looks great! But now my home button doesn"t work :(. After re-disassembling I found one of the tiny sensitive little spring contacts for the button had broken off inside the phone. I think the only way to fix it is to solder a pin about 1/16th inch long onto the contact to get it to press against the other contact point on the phone. Otherwise I could tear off the digitizer and glass I just replaced and replace the whole home button assembly...

The TFT (Thin Film Transistor) LCD display screens of computers, laptops, televisions, and other devices are delicate. They need to be handled and maintained properly to keep them in good shape. Otherwise, the lack of maintenance can lead to glitches and other problems that could affect the entire device.

As a business owner, you should be aware of how to take care of the materials you use in your products. This way, you can assure your customers of quality goods and services. Here are some things to keep in mind when cleaning and maintaining TFT LCD display.

Avoid using abrasive materials like paper towels and newspaper in cleaning TFT LCD screens as they may scratch the surface. Instead, opt for a lint-free cloth. To remove dirt, you may use plain water or add a small amount of vinegar. However, don’t spray the liquid directly on the monitor, and remember to put gentle pressure when wiping the screen.

Though TFT LCDs look like glass, it’s important to remember that it’s plastic so that you can treat it as that. Given this, don’t use glass cleaners that have ammonia or alcohol in it as it could be harmful to the TFT LCD.

Don’t put heavy objects on top of TFT LCD module as it could damage the material and its components. Make sure it’s safe from anything that might scratch, wet, or hit it as the crystals sandwiched between two thin plastic sheets are electronically sensitive. Also, it shouldn’t be able to absorb any moisture as it won’t go away by itself and it might damage the entire display.

If you display laptops in your store, make sure that you also clean the keyboards and not just the LCD screen. This is because folding down the lid exposes the screen to keyboard dust, dirt, and other contaminants. So, it’s necessary to keep the entire device clean to protect the TFT LCD.

These are only some of the ways to properly handle TFT LCD screens. It’s best to ask your supplier for tips on how to take care of the materials to ensure that they’re always in top condition.

The television screen is what everyone sees first, but don’t forget these other key areas, not to mention the area around your unit. “It can also help to clean the furniture and carpets around the TV to prevent dust and hair from getting into it,” says Williams.

The remote control is handled regularly. This is the one time when harsh chemicals can be used sparingly. Follow the manufacturer owner’s manual instructions first, but if sanitizing is needed, use a cleaner that’s at least 70 percent alcohol, according to the Centers for Disease Control (CDC) recommendations. (Basic drugstore isopropyl alcohol works well for this.)

Start the remote control cleaning by removing the batteries. As with the TV screen recommendations, you’ll want to avoid spraying directly onto the surface, as this could cause the device to malfunction. Dampen a clean microfiber cloth and rub gently on the top and the underside of the remote control. For hard-to-reach gunk that’s jammed between the buttons, try a cotton swab dipped in a small amount of the cleaning solution. Make sure to let it dry thoroughly before replacing the batteries and using it again.

When figuring out how to clean a TV screen, selecting the safest cleaning solution is key, but it’s also important to know what cleaning products to avoid. Keep in mind that not only should you skip cleaning with certain products, you should also avoid spraying them in close proximity to the TV.

Both Panasonic and Samsung both have lengthy “avoid” lists that include harsh chemicals such as wax, cleaning fluid, acetone, benzene, alcohol, thinner, mosquito repellent and insect spray (really!), lubricant, solvent and undiluted mild dish soap. These can, as Williams says, “cause clouding and can wear away your TV’s anti-glare coating.”

In terms of what to use, Samsung recommends “monitor cleaner only” (also called TV screen cleaner). Panasonic suggests “one part mild liquid dish soap diluted by 100 times the amount of water.” To make this cleaning solution, add a scant teaspoon of liquid dish soap to two cups of water, stirring well to dissolve.

Williams likes TV cleaning kits for their ease of use. “A TV kit will be your safest option for cleaning a TV,” he says. “These kits will come with everything you need to get your TV looking new, like screen-cleaning solvent and a fast-drying microfiber cloth.” You can find TV cleaning kits and cleaning products designed for flat-screen TVs at electronics stores or on Amazon.

Some people swear that only distilled water is useful as cleaning spray for their delicate electronics. Although Williams does not necessarily recommend using distilled water, if you know for a fact you have hard water in your area, you may want to try the distilled water route and see if you notice a difference. Hard water, which has high levels of calcium and magnesium, may leave a film or residue when it’s used for cleaning. Before you spray water to clean TV screens, try experimenting with tap water on a less-important screen, like an old cell phone, to assess the results.

If you can picture the hulking tube TVs (also known as CRTVs) of yore, you may also remember how delightfully easy they were to clean—a few spritzes of window cleaner and some wipes with paper towels and you were good to go—no special microfiber cloth required. But modern TVs with fancier technologies like LCD, OLED, and plasma call for gentler techniques. “Avoid using chemicals like alcohol, ammonia or acetones when cleaning your TV. These cleaners were safe to use for previous generations of TVs with glass panels, but as the hardware changes with time, the cleaning methods do too,” says Williams. Since some multi-purpose and glass cleaners are made with ammonia, skip the Windex.

Modern TVs are often smart TVs but the cleaning tips are the same as the ones for LCD, OLED and plasma TVs. The microfiber cloth is your TV screen’s best friend. “The majority of TVs you purchase today will be smart TVs, and the cleaning process is the same as TVs without smart capabilities,” Williams says.

I used to have this same problem, but not any more. I came up with the perfect method of cleaning the LCD panel. First of all, I had no idea that alcohol would damage the LCD. I normally use 90% Isopropyl Alcohol for cleaning everything on the smartphones and tablets that I repair. I might change that back to a pre-mixed 50% solution, but the 50% does not remove grease as well. I honestly don"t think a 1-time cleaning using the 90% will cause a problem. I could believe that continued cleaning with the alcohol could cause damage, however.

What works best for me is to follow this 3-step procedure. And take note, scrubbing an LCD with a back-and-forth motion will only get you frustrated, just as the previous poster had mentioned. I"ve been there, rubbing on an LCD for upwards of an hour, only ending with the same grease smudges that I started with. Well anyway, here"s my 3-step process:

1. Using a micro fiber or dust-free cloth, or even a soft toilet paper, put a liberal amount of the alcohol on your cleaning cloth and use "flood-strokes" on the LCD in one direction ONLY. Wipe down the LCD in as few strokes as possible, as wide of a stroke as you can with your cleaning cloth or TP. You should use enough alcohol that it leaves a wet film on the LCD.

3. Using your hot breath (hopefully your breath isn"t so bad that you melt the LCD, so be careful here), steam up the surface of the LCD and use the lint-free cloth to wipe the steam. This will get rid of all the residue left behind by the alcohol. It"s okay to wipe in a back-and-forth motion when using the hot-steamy-breath application of moisture. In only 5 minutes, your LCD should be completely free of streaks, grease, and dirt. Blow away any excess lint, and get the glass digitizer put on it as quickly as you can before your LCD attracts dust out of the air.

One thing I would also recommend is that you have a good filter in your HVAC system. Some people I know of actually use a hood that forces air through a filter, and into the hood. This way, you don"t have any ambient air coming into contact with your LCD, because you are operating in a positive-pressure environment with incoming air that is filtered, and thus exhausting into the room after leaving the hood.

I will be writing a post on this and possibly doing a video for my blog site, which is the Carlton Zone Blog. Check the site soon. I would be glad to post videos and advice for repairs, because I do a lot of this.

Television screens are supposed to be clean and free of dirt, dust, or any debris that may blur vision. This is why this component is one of the most vital parts of a Television. Nothing can be worse than straining your eyes to make sense of the pictures your set is projecting. If you do not clean your TV regularly, fingerprint smudges and dust will build up.

Cleaning your LED TV or any type of television for that matter is something you should do at least once every 2 or 3 weeks. In fact, I will suggest that you do it as often as you watch it any paying more attention to the screen when you do so. If you clean your TV set regularly, it will always look brand new, and you will enjoy bright and colorful pictures without said. Bearing that in mind, there are ways to go about a cleaning endeavor. Unfortunately, not everyone knows how to clean a set effectively. Many think that a piece of towel soaked in water will do. How wrong they are. Television screens are very sensitive, so a great deal of care is required to do the job effectively. In addition to that, being careful also protects the screen for damage. Secondly, you need to understand that TV sets are different. Although they all project sounds and images, they are built differently. So, therefore, the approach to cleaning should also be different as well.

The approach to cleaning an LED TV screen, for instance, requires extra care compared to the cleaning of a Tube TV. They both have screens, but the former is more sensitive than the latter due to the sensitivity of LED screens build material. Bearing all this in mind, how do you safely clean an LED TV screen without damaging it in the process. In this article, we will show you safe and intelligent ways to go about it using available and affordable materials. You will also learn a few tips about how to do it safely too.

Before you proceed, you need to bear two things in mind when cleaning LED TV screens. Firstly, you want to do it in such a way and with the right materials that ensure the screen is clean and devoid of dust or stains of any kind. You want your screen to be as bright and clear as possible. Secondly, you want to avoid damaging the screen or reducing its projection quality. This is why it is necessary to use only the right cleaning materials and approach at all times. Now, here are some helpful tips for adopting when cleaning an LED television screen. [/fusion_text]

Every electronic equipment comes with an owner’s manual. This manual provides the user with sufficient information about how to use and maintain the gadget. The same thing goes for LED sets. They come with an owner’s manual too. Before you clean the set, you may want to read the manual first.

In fact, it is advisable that you read it first immediately you buy and install it in your home. By reading the manual, you gain more understanding regarding how to care for the television all through it a lifespan in your home, office, or wherever you install it. For the purpose of cleaning, pay attention to the section that provides information about how to do it effectively.

Reading manuals is important because different television manufacturers provide different approaches to cleaning their sets. What works for an LG LED TV may not work for a Samsung set. That is why it is so important to only follow the recommendation of a one cap fits all approach to cleaning your TV screen. If you read the manual when you bought it, but you have forgotten the cleaning details, consult it once again to refresh your memory.

Before you start the cleaning properly, turn off the television set. Do not stop at that. You also need to unplug it from the power source. Once you have done that, do not start cleaning the screen immediately. Give it time to cool down. The cleaning process may take between 2-5 minutes or even more depend on your LED TV model or how long it was on.

Turning the TV off will cut off power leading to the cooling down of the screen. You don’t want to be cleaning a hot or warm screen, do you? You want to make sure that the screen is as cool as possible and non-reactive to whichever cleaning agent you use.

Another advice to take in that is so important is that you should never use paper towels to clean the screen. There are reasons to avoid paper towels. Paper towels, especially when soaked in water, leave smudges and stains on the screen. No matter how long or how hard you try to wipe the marks off, they yet remain. Paper towels are bad for your TV screen. It’s as simple as that.

To enjoy an ultimate cleaning experience, you should consider using microfiber cleaning pieces. Some people recommend cotton whole because they are more breathable. However, microfiber cloths are more durable. In addition, they do not stick to your screen. Older LED, or LCD screens can’t handle traditional cleaning methods or materials. With microfiber, you can eliminate stains, remove smudges, and fingerprints with ease.

To use microfiber, simply wipe the surface of the screen in a circular motion. Cover as much part of the screen as you possibly can. Work your way around the edges as well. More importantly, when cleaning, avoid touching the screen with your bare hands as doing so will leave fingerprint marks on it.

The use of chemicals should be avoided at all costs. Chemicals damage screens more than you know. That a chemical agent worked on a particular surface is not an indication that it will work well for your TV screen. LED screens are very sensitive and fragile, so you ought to make sure that you keep chemicals as far away as possible. Another material you should never use is a detergent solution (water and detergent).

Soap, scouring powder, was window cleaners, and any other general industrial cleaner should be avoided. Abrasive pads and towels made from paper should not be used either. Using any of these materials will lead to screen scratches, anti-glare coating damage, or permanent screen damage. The sad part is that the damage may not be noticeable at first, but over time, the same will become permanent.

If you must wet your cleaning material with water, do so in little splashes. Avoid spraying the screen directly with water. When wiping the screen, do so gently because it can break if pressed too hard as screens are very fragile.

You will notice that your microfiber cloth cannot reach the edges of the screen like the other areas. If you don’t clean the edges too, dust and first will accumulate in those parts, and after a time removing the stains will love difficult. Furthermore, failure to clean screen edges will lead to an uneven appearance, with poor picture quality being the end result. To clean edges and corners effectively, use cotton swabs to greater effect. For better results, dab the cotton swabs in water. Pick off the dirt carefully by dragging them out using the swabs. Do this for the four corners of the screen.

As for the edges, run the swabs up and down systematically but avoid running them all the way down to the edges as this may drive dirt further on that may be difficult to remove. For better results, use as many cotton swabs as you can.

Unlike an LED TV screen, cleaning a Tube TV is much easier. Tube TV screens are more rugged and can withstand pressure, but doing so carefully is also important. You can use a microfiber cleaning cloth doused in a little water. Never spray the screen directly as this may damage it. Rather, work your way with the microfiber cloth. Apply the same circular cleaning motion like you would do an LED TV screen. Cotton swabs will also come in handy to pick off the dirt from the screen corners.

Dish soap can also be used on LED and LCD screens, albeit with care. Before you use a dish soap solution, first wipe the screen with a dry cloth to remove dust. Now, dip your cleaning cloth in the dish soap solution. Squeeze off the liquid then gently wipe the screen. Make sure you cover every surface area. Once you are done, don’t waste time to clean; otherwise, the solution will dry up on the screen leading to a blurry vision. Rinse the cloth with water to remove soapy residue then take the dry cloth you used to wipe off the dust once again to dry the screen.

Yes, they do. There are actually cleaners specially made for cleaning tv screens. Screen cleaners contain distilled water, isopropyl, and alcohol solutions. If you must use an electronic screen cleaner, make sure you shake to content before use. Also, apply on a limited portion of your cleaning cloth.

Cleaning your TV remote control is part of a general TV cleaning process. So to clean your remote control, follow these tips. Pop-out the batteries:Remove the batteries from the remote. Doing so will create enough room when cleaning the interior casing.

Tap the remote lightly on a hard surface:Remote controls gather a lot of dust and debris along the way. To remove them, tap the remote control on a hard surface like a table. Do this gently and several times to dislodge debris stuck in crevices.

Use a mild disinfectant:Apply a cleaning disinfectant on a piece of cloth and clean the body thoroughly. The use of disinfectant is necessary because our hands carry germs, and we transfer these germs to the remote control anytime we operate it. Clean the whole body thoroughly.

Maintain a weekly timetable:To ensure that your TV set is always clean, make sure you clean it weekly. Add it as part of your to-do list when cleaning your home. If your furniture deserves regular cleaning, so does your television set. Doing regular cleaning will atop dust, debris and fingerprints from smearing the screen. It is also much easier to clean when there is little dust on the surface. Keeping a microfiber cloth close by is also advised so that you can quickly wipe off dust when necessary.

Never spray your LED TVset directly with any substance:Avoid spraying your screen directly with any substance even if it is an electronic cleaning gel. Excessive spraying can damage the cabinet and the structural make-up of the screen. If you must use any cleaning solution, apply it on the napkin or microfiber cloth you are using and gently wipe the screen with it.

Use a Vacuum:To draw out dust and debris hidden in the crevices of the set, use a low suction vacuum. You may also use the vacuum cleaner’s soft brush to remove dust from the cable, vents, and ports of the TV

Adhere strictly to the User Manual:Your LED TV set comes with a user manual for a reason. The manual is meant to guide your use of the device. When cleaning your set, make sure you follow the directives of the manufacturer. Doing it any other way may damage the TV beyond repair.

Avoid strong cleaning agents:Just like we pointed out in the article, avoid strong cleaning agent as not all of them are good for your television’s screen. The screen is very sensitive, so bear this in mind. Some examples of cleaning agents to avoid include unmixed alcohol, ammonia, acetone, and Wax.

Maintaining your LED TV set requires a lot of patience and attention to detail. If you want the screen to remain in good shape, you need to clean it regularly and with proper cleaning materials. If you follow the tips in this article, your screen will remain bright and sharp for as long as you use the set.

Before you give into your impulses and wipe your screen with whatever you have at hand, let us stop you right there. Your display is way more delicate than you think, and if you want it to last a long time in optimal conditions, you’ll need to treat it with proper love and care.

The good news is that cleaning a computer screen is more simple than you think. You only need a soft cloth, a tiny bit of water, and the most delicate of touches.

As you would expect, not all screens are created equal, and some are more delicate than others. The safest way to figure out the proper care for your screen is to search for the make and model of your device, find out if it has an LCD, LED, or some other type of display, and search for the manufacturer’s instructions on how to care for it.

If you want to skip all that, there’s an easy way to avoid making a mistake that might not only result in irreparable damage to your screen but to your entire device. According to Joe Silverman, owner of New York Computer Help, a tech repair center in New York City, no matter how much money you spent on your computer or tablet, it probably has an LED or an LCD screen if you bought it within the last three years—and neither type benefits from window cleaner or highly concentrated alcohol.

That’s the uppermost layer of your screen, which is extremely sensitive to the acidity in alcohol and in compounds like ammonia or propylene glycol. These are often present in cleaning agents such as window cleaners and degreasers. Using these liquids will corrode the surface of your screen, resulting in scratches or even smudges you won’t be able to get rid of.

“Underneath there it’s the most intelligent part of the laptop,” Silverman explains. “What happens is that the liquid will get through that first line of defense, and when it does that it’s going to really affect the sensors.”

Things get even trickier when you’re dealing with touchscreens. On models like the Microsoft Surface, the display is the main input—as opposed to your mouse or trackpad on a regular laptop—so it’s ultra-sensitive, Silverman says. Using a strong liquid cleaner like a degreaser or a bleach-based disinfectant can obliterate the top layer on the screen. Combine that with high pressure, and you can kiss your fancy touchscreen computer goodbye.

Another downside to newer computers is their size and weight. If you decided to splurge on a new laptop, for example, you probably found one that has top-notch components, but also a slick, lightweight design. This format is only possible if everything in your laptop is smaller and thinner. In the case of your display, a thinner screen means a weaker barrier between your computer’s guts and the elements in the outside world.

First, turn off your computer and disconnect the charger. This might sound paranoid, but the benefit is twofold—you avoid any chance of triggering an electrical surge, and your screen will remain black, which will make it easier to see any dirt and grime.

Pour a couple drops of water on your cloth. Forget paper towels or the sleeve of that soft cotton t-shirt you love—microfiber is your best bet. Still, no matter how soft it is, a dry wipe could always leave micro-abrasions on your screen. The moisture will also help gather dust and particles while lifting grease from your display.

Use circular motions starting in the center of your screen and moving outward, so you don’t leave any streaks. If you can see any droplets or water traces on the glass while you clean, you’ve used way too much water. Gently dab the residual H2O with an absorbent cloth or tissue paper and start again.

If you’re dealing with next-level gunk, you can use isopropyl alcohol at 70 percent or lower, Silverman says. “That percentage is very important,” he explains. “We’d only use 90 percent or higher on dummy parts that don’t have sensors, like top cases and keyboards.” In these extreme cases, spray the alcohol on the cloth, never directly on the screen, and wipe it gently.

Maybe you can get away with using a high percentage of alcohol or even a window cleaner on your computer screen once or twice. But if you keep at it, eventually you’ll see the deleterious effects.

“You’ll see discoloration, lines (vertical and horizontal); sometimes it looks pretty and rainbow-like,” Silverman says. “Sometimes it’ll blink and sometimes you’ll see droplets of water or liquid in the back of the screen. There’s a lot of ways in which damage appears.”

The best way to avoid damaging your screen while cleaning it is to simply keep it from getting dirty in the first place. If you have a laptop, cover the keyboard with a thin microfiber cloth before closing it to prevent finger grease from transferring to the screen. If you have a touchscreen, wash your hands often before you use it, but make sure you let your hands dry completely before you start tapping—the soapy water or liquid hand cleanser from your fingers can easily end up on the screen and corrode it.

Wet, newly washed hands can also be detrimental to regular computers. Silverman says he often sees such victims in his shop—computers completely dead after hand sanitizer rubbed off the owner’s hands, seeped through the keyboard, and ruined the inner guts of the machine.

Your phone was designed to be carried, dropped, tapped, swiped, smashed against your face for long periods of time, and stowed in the deepest corners of your bag. In other words, its screen is way more resilient than your computer’s.

Silverman explains that most iPhones and Samsung phones, for example, have screens made out of one thick piece of glass. These, as opposed to computer screens, have all the LCD layers fused together, making them much more difficult to damage. Still, if you’re using alcohol, he recommends keeping the concentration at 70 percent or lower, using a soft cloth, and applying only low pressure to get rid of any accumulated gunk there.

Be especially careful with charging ports, as contact with water (also present in rubbing alcohol) can damage the electronics inside your smartphone. Newer models often are resistant to liquids, but there’s always a threshold to how much they can withstand. And you probably don’t want to know what that is.

Replacing the screen of your computer or smartphone can be expensive, and even if that’s not an issue for you, no one wants their devices to fail when they need them the most. So remember these tips well—we hope you never have to read this article again.

When it comes to cleaning, flat-screen TVs and LCD screens require special care and a gentle touch. With the wrong technique, you can easily scratch the screen or damage the surface"s antiglare coating. Even rubbing too hard can cause pixels (the tiny dots that compose images on computer monitors and TV screens) to burn out and stop working permanently. Most household cleaning products are too harsh to use on electronic devices with LCD or OLED screens, so choose your TV cleaning strategy carefully. These tips on how to clean a TV screen will help protect your device while ridding it of dust, smudges, fingerprints, and streaks.

Before you begin cleaning a TV or LCD monitor screen, check the manufacturer"s manual for cleaning instructions. If a computer or electronic wipe is recommended, purchase a container for quick cleanups. Note that using a cleaning product or method not recommended by the manufacturer will likely void a product"s warranty. It"s also important to avoid spraying liquid on the screen when cleaning a TV. Liquids can drip into the frame, get wicked inside the screen, and cause permanent damage.

If streaks or stains remain, wet a microfiber cloth with distilled water and wring the cloth until it"s almost dry. With very little pressure, wipe the cloth across the screen in broad motions, working from the top of the screen to the bottom. If smudges persist, dampen a new microfiber cloth with 50-50 water and vinegar solution, wringing it tightly to keep it slightly damp, and wipe.

To avoid damage to your TV while cleaning, only use gentle products. Never wipe the screen with paper towels, abrasive sponges, or coarsely woven rags, which can cause scratches. Instead, use high-quality, finely woven microfiber cloths to clean TV screens, recommends cleaning expert Leslie Reichert.

You should also avoid cleaning products that contain alcohol or ammonia. These types of cleaners can remove antiglare coatings and cause images to become cloudy or distorted. A simple swipe with a microfiber cloth ($9 for 5, Amazon) is typically all that"s needed to remove dust and other debris from the screen"s surface. When more than a light dusting is required, however, use the guidelines below for the best way to clean a TV.

Practice preventative measures so you won"t have to clean TV screens often. Keep food, drinks, and kids away from TV and computer screens to eradicate risks of messy splatters and fingerprint smudges. During your weekly house cleaning, lightly dust the screens with a microfiber cloth to prevent dust buildup.

When was the last time you cleaned your TV? As one of the most prominent pieces of equipment in your home, your TV is probably exposed to more than you think. And we’re talking dust, cobwebs, pet hair and dirt, not to mention germs and bacteria in the air. Think of how often you’re touching your TV and the remote too. If your TV is near the kitchen, lingering odors and oils in the air could also be hitting your screen’s surface.

Figuring out what to use to clean your TV isn’t that complicated, but there are definitely one or two things you should avoid. Do turn your TV off before you get started. Don’t reach for the typical glass cleaner. Here are some other specifics.

Cloth: A soft microfiber cloth or flannel is the best material to use when cleaning a delicate flat screen. Paper towels or rags are a little rougher and could cause scratches you’d rather avoid. Plus, they’re generally thin and cheaper, leading to bits of paper breaking off and getting stuck on your screen.

Cleaning Solution: Moistening your cloth with a bit of water is generally more than enough to clean off everyday dust and debris. But if it’s not, you can always use a special screen cleaning solution, which is designed to get out gunk while being gentle on your TV surface. Harsh cleaning solutions like glass cleaner or other cleaners you would use for the rest of your house could react badly with the screen and cause permanent discoloration.

Specialty Products: There are also specially formulated products like wipes or cleaning sprays that are designed to be used on TV and computer screens without causing damage to the surface or the color. Sprays often come with a microfiber cloth included, and all of these products are made with mild, non-toxic ingredients.

Simple microfiber cloths like these Amazon-branded ones are perfect for cleaning off delicate screens either dry or moistened slightly with a cleaning solution. The cloths are gentle on surfaces and can be tossed in the washing machine and re-used.

We like these microfiber cloths for cleaning your TV but they’re also useful to have in the house for cleaning a wide variety of surfaces (say, lighting and furniture) or as paper towel replacements when you want to wipe down a counter or desk.

It’s hard to beat wipes when it comes to ease of use. We like these Windex wipes because they come in large quantities from a trusted brand, made with gentle ingredients that are safe to use on all screens, from your TV to your laptop.

This spray comes with a plush microfiber cloth included, which is helpful, and makes screens look shiny and new in a matter of seconds. And according to the product notes, each use keeps your screen cleaner for longer, requiring less product each time.

We always like to include an environmentally conscious option, like this EcoMoist screen cleaner, which is non-toxic, alcohol free, and hypoallergenic according to the manufacturer notes. It also comes with a microfiber cloth included.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Luckily, the advice from most manufacturers is simple: turn off the TV to identify the marks or dusty areas then wipe gently using a clean, soft and dry cloth.

While we will go into more detail about how to clean the screen without causing any damage – and recommend some solid products to help you – that’s the broad advice from a range of top companies, including Samsung, Sony, LG and Panasonic.

It applies to all types of modern display – including every model on our best smart TV guide – and regardless of whether you have an LCD/LED, OLED or QLED. But it’s not only the TV itself, don’t forget the remote gets much more hands-on time every day.

You don’t want to have bought an expensive new smart TV just to have it covered in scratches, so here’s how to clean the display in five easy-to-follow steps:Unplug or switch off the device. This will help you quickly identify any areas that need to be cleaned or are particularly covered in dust or smudges.

Gently wipe the screen using a clean, dry, soft cloth. If possible, use a lint-free cloth – and our personal recommendation is to stick with microfibre. These are available at every supermarket. Best to wipe in a circular motion.

Make sure the display is fully dry and clean. If the marks were removed using a soft, dry cloth you can turn the TV on. If you had to use a specialist spray, make sure that the TV is completely dry before switching it back on.

The advice may be straightforward, but there are some key cleaning approaches you should always avoid when it comes to touching and cleaning a TV screen.Avoid all home cleaning products. Surface, window or glass cleaners should stay as far away from your TV as possible. These will often contain chemicals such as alcohol, benzene or ammonia that can damage your screen.

Avoid paper towels, rolls and your sleeves: A fast-track to scratch town, these will leave deep marks on your display that will be so much worse than dust. Using these harsh materials could also strip the TVs anti-glare coating.

Avoid all moisture on the screen if possible. Some manufacturers say a very small amount of water can be used for tough marks but others say to never apply moisture. If you have to, always apply to the cloth, not the screen. Using a solution is a last resort, and only after a careful gentle wipe has failed.

Don’t use too much pressure: TV screens are fragile to the touch, so never push down hard with your cloth while cleaning. Doing so may damage the pixels under the display. Your TV is not a touchscreen smartphone.

Don"t forget the remote control: While your TV screen won’t be touched often, the same can’t be said for the remotes. These will likely be passed between your family members or friends so it"s best to also give them a wipe down.

You don’t always need to buy a cleaning kit: While these are marketed as an all-in-one solution, a microfibre cloth is often enough for dust/smudges and purchasing a pack of 12-24 cloths may actually be better value.

Lastly, don’t forget about the ports: If the screen is covered in dust, it’s likely the same goes for the back of the TV. Give those ports a dust down, too.

While there’s a lot of overlap between each brand’s cleaning tips, here’s the advice from each major TV manufacturer – and a direct link to their own tips page.

LG: “Cleaning your 4K, LED or LED TV screen with a soft, dry cloth is recommended. If you have already used liquid on the screen, dry it as quickly as possible (it may not be too late). Chemicals… should be avoided. Moisture on or near the TV should be avoided as it could cause short circuits in the electronic components.”

Samsung: “For general cleaning of the frame and screen of your TV, you should use a soft, clean, lint-free, dry cloth. We recommend using a microfibre cloth.

“You should never use any type of window cleaner, soap, scouring powder, or any cleanser with solvents such as alcohol, benzene, ammonia, or paint thinner. Never use abrasive pads or paper towels. If you do, you can scratch the screen or strip the anti-glare coating off the screen and cause permanent damage.”

Sony: “Gently wipe the screen or exterior with a dry, soft cloth, such as an eyeglass cleaner. For inks from oil markers on the screen, soak a cloth in a non-soap cleanser diluted (by less than 1%) with water. Squeeze it tightly, then wipe the ink off. Don"t use detergent with abrasives such as a cleanser.” Avoid touching the screen.

Panasonic: “A clean, dry, soft cloth should be used. For stubborn dirt, dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Ring the cloth and wipe the screen. Ensure that the cloth does not drip water; the television is not watertight and any damage to the television due to water getting into it is not covered under warranty. Finally, wipe away all of the moisture.”

The AmazonBasics range of 30 cm x 41 cm microfibre cloths is an affordable option – with a variety of pack sizes available to buy. We chose the 24 pack as that should last months – if not longer – if you are cleaning general dust or smudges from your TV. They are lint-free and won’t result in streaks across your screen. For just under £12, you will get a variety of towel colours, including blue, orange and white.

These microfibre cloths stand out due to their 40cm x 22cm sizing and will be great if you are someone with a larger TV. Made by cleaning company Sorbo, they attract dust from the screen and won’t leave any streaks behind. The cloths are machine washable at a temperature of 40 degrees Celsius and come in a variety of colours including blue, pink and yellow. The pack of six microfibre cloths costs £5.93.Latest deals

These microfibre cleaning cloths by the brand Mr. Siga are exactly what TV makers were referencing in their cleaning guides: ultra-soft, highly absorbent, non-abrasive and will clean without any lint or streaks left behind. These ‎32 x 32cm cloths cost £11.99 for a pack of 12, although they are available in packs of 50 (£20.99).Latest deals

A slightly different design to the microfibre cloths that you will typically see in your kitchen, this polyester-made set more closely resembles a glasses cleaner but will be effective at wiping down electronics including phones, TVs and monitors. Made by Charles Parker London, you get five 30cm x 30cm black cloths for £9, these will be great for wiping off the dust – but especially fingerprints – from your screen.Latest deals

Another popular option is these lint-free microfibre cloths from UK-based brand Exel. At 40 x 40 cm, they are large in size so perfect for wiping down larger TVs from dust and smudges. For the pack of 10, which should last you months if you are only using them for your TV, it costs £8.30, so they are good value. If you need a well-sized set of microfibre cloths but don’t want dozens of towels, this is a great option.Latest deals

The screen cleaner spray from IT Dusters - called “Screen Mom” - is plant-based and contains no odour, alcohol, ammonia, or harmful chemicals. The kit also contains a 40xm x 40cm microfibre towel and in combination they can be used to remove tough prints, oils or streaks from screens, including TVs, monitors, laptops and phones. The company says that the 16oz bottle has enough for more than 1,500 sprays, but always remember to only spray on the cloth - and never on the TV screen itself.

The GreatShield cleaning kit contains one 20cm x 15cm microfibre cloth, one 60ml bottle of sterile solution cleaner and a brush that can be used to help remove dust or debris from your TV ports and remote control. The screen cleaner does not contain ammonia or phosphate and claims to be completely non-static and non-streak. As with all cleaning solutions, only spray on the cloth – never on the TV screen itself – and read up on your own TV manufacturer’s guidelines for cleaning the model.Latest deals

For the latest news, reviews, guides, and deals, check out the RadioTimes.com Technology section and consider signing up to receive our tech newsletter. Need a signal boost? Try our pick of the best indoor TV aerials.