3.5 inch tft lcd screen for arduino in stock

This TFT display is big (3.5" diagonal) bright and colorful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display.

This display has a controller built into it with RAM buffering so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit or SPI. For 8-bit mode, you"ll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode.

This TFT 3.5 Inch LCD display support 480x320 pixel resolutions. The display uses the ILI9481 graphics controller. The module includes the 5V-3.3V power conversion circuit and no additional level conversion circuitry is required. This Module can be inserted directly into the Arduino Mega2560 Board.

Specification: Lcd Type: Tft Transmissive Viewing Direction: 12 O"Clock Module Outline (Wxhxd): 55.5 X 84.96 X 2.5 Mm Active Area (Wxh): 73.44 X 48.96 Mm Number Of Dots: 320(Rgb) X 480 Driver Ic: Ili9486 Backlight Type: 6Chips White Leds, Paralell Interface Type: Parallel 16-Bit Input Voltage: 2.8~3.3V Operating Temperatur: -10~60 Number Of Led: 6 Package Included: 1 X 3.5 Inch Tft

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The module is also pre-soldered with pins for easy mount (like a shield) on either of the Arduino Mega and Uno, which is nice since there are not many big TFT displays that work with the Arduino Uno.

Large TFT LCD display based on the ILI9486 controller. Compared to the popular 2.4″ model the active area of the screen is practically twice. As well as the resolution.

This is a big advantage compared to the parallel interface. For communication you need fewer pins of the microcontroller, which, as you know, we never have too many. There is also an SD card slot on the bottom of the display.

The Arduino Mega2560 module is a 3.5-inch TFT LCD module with 480×320 resolution and 65K color display. It uses 16-bit line parallel port communication, and the driver IC is ILI9486.

The module includes an LCD display, 5V ~ 3.3V level to the circuit, can be directly plugged into the Arduino mega2560 development board, also supports SD card and SPI Flash function expansion.

The 3.5 inch TFT LCD Screen ILI9486 480X320 Display comes with 480×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display.

It is compatible with Uno, Mega, and Due board versions of Arduino, as well as STM32, and STM51 board series. The backlight of this LCD is not controllable and powered up with the 3.3V pin of your Arduino board, but the 5V pin powers the LCD operations.

To use this LCD screen, you need to plug it on top of your Arduino Uno board and upload the sample code. For the images and other files, it has a MicroSD card slot at the bottom.

This is a 3.5-inch 320 * 480 resolution TFT color screen. It supports working boards such as Arduino uno and Arduino mega2560 and Arduino due. Also supports STM32, 51 and other conventional microcontrollers.

When using this screen, you do not need any wiring operations, just plug onto your arduino board, we will provide the corresponding Arduino library files, the development code is open source, you can use arduino and this screen to build some applications.The backlight always on, can not control the backlight, backlight is connect to 3.3V.

Shield for Arduino Uno consisting of a TFT LCD display with 3.5" resistive touch screen, ILI9486 graphic controller, 480x320 pixel resolution, 65,000 colors, white LED backlight, SD card slot and SPI interface. Ideal for creating applications that need to display data, photos and videos. Suitable for interfacing with Arduino Uno, it is also compatible with Fishino, Nucleo, Xnucleo, MAKERUNO and UNO PLUS (see related products).