lcd screen fuzzy free sample

Some LCD blur or ghosting issues result from electrical interference or faulty surge protectors. To eliminate this as a cause, try plugging your TV directly into the outlet without any power strips or surge suppressors in the chain. If that solves the problem, you can try using a different power strip.

One of the most common causes of a blurry picture on a flat-screen LCD TV (or monitor) is a mismatch between the content’s resolution and the native resolution capability of the screen.

LCD, Mini-LED, microLED, Plasma, OLED, or QD-OLED all use different types of technology to make moving pictures. However, one thing they all have in common is a “native” resolution. This refers to the TV’s grid of physical pixels (picture elements). A 4K UHD TV has a pixel grid of 3840 x 2160 pixels. This is four times as many pixels as a Full HD TV at 1920×1080. So, for every pixel of information in a Full HD image source, the TV must fill four physical pixels’ worth of data.

There are various methods of “upscaling” lower-resolution images to high-resolution displays, and they all have varying levels of success. Going from FHD to UHD is straightforward since it involves making groups of four pixels act as a single pixel. Whenever the resolution of the source image divides evenly into the target screen’s resolution, you’ll get a softer image, but it will still look good.

If the source doesn’t divide perfectly into the target, you may get an ugly smeary result. Many of the fixes listed below can help to fix blurry or fuzzy upscaling results.

Various TVs and set-top box devices offer different options regarding how they should scale lower-resolution sources to a higher-resolution screen. We can’t be very specific here because different devices and TVs have other names and menu systems. So you’re better off looking in your manual or online for anything to do with “upscaling” and your devices.

If you are watching a streaming video source (such as the Netflix or Hulu app on a smart TV), then the fuzzy image may have nothing to do with your TV and everything to do with your bandwidth or quality settings.

One fix for a blurry or fuzzy video is to switch out the HDMI cable or move it to another input on the TV to check if there might be something wrong with the cable or the port.

Lowering the sharpness level will soften the image. It might be that your sharpness setting has softened things so much that the display looks blurry or fuzzy. The answer, of course, is to turn the sharpness up until you’re happy with the result.

Unlike CRT (cathode ray tube) TVs, all modern flat-screen TVs exhibit a type of motion blur known as sample-and-hold motion blur. In addition, lower-end TVs may have inherent blur as the individual pixels change their state too slowly.

The second feature is something known as Black Frame Insertion (BFI). This inserts a black frame between every frame displayed on the screen. This makes the TV offer motion closer to a pulsed CRT display, thus defeating sample-and-hold blur. However, this comes at the cost of brightness and vibrancy. Newer TVs don’t suffer as much as older models, but either way, you can switch the feature on and decide which image you prefer.

If nothing you’ve tried above seems to resolve your fuzzy, blurry TV, it’s probably time to have a professional tech support person look at your TV. In some cases, it may be as simple as replacing a relatively inexpensive component. But if there’s something wrong with the core components of the TV, it’s often not worth the expense to replace those major parts. If your TV is still under warranty, you should refrain from letting anyone work on it, even if it is a minor problem. Instead, have it repaired and replaced under warranty.

A new computer screen can look fuzzy, blurry, or pixelated. Common reasons to look in-depth and fathom for future benefits include bad screen resolution settings, dirty screens, and poor connection.

A monitor can introduce image flicker at lower backlight levels, even if it"s flicker-free at its max brightness. If you"re concerned that your monitor flickers at lower backlight levels, set the brightness setting to its lowest, and wave your hand (or any object) in front of the screen. If you notice your hand is moving like it"s in front of a strobe light, then it has flicker. Increase the backlight until you don"t see this. If you don"t see this effect, then there"s no flicker.

LED-backlit monitors have a backlight to display an image on the screen. Sometimes, these monitors will use a technique called pulse width modulation in order to dim the backlight, where it sends short impulses, creating a flicker effect. We want to know which monitors do this and at which frequencies the backlight flickers. Most monitors we"ve tested are completely flicker-free, but there are a few that flicker. Introducing flicker can help with the appearance of motion but may also create eye strain, so having a monitor that flickers or not is entirely up to you.

Many Apple products use liquid crystal displays (LCD). LCD technology uses rows and columns of addressable points (pixels) that render text and images on the screen. Each pixel has three separate subpixels—red, green and blue—that allow an image to render in full color. Each subpixel has a corresponding transistor responsible for turning that subpixel on and off.

Depending on the display size, there can be thousands or millions of subpixels on the LCD panel. For example, the LCD panel used in the iMac (Retina 5K, 27-inch, 2019) has a display resolution of 5120 x 2880, which means there are over 14.7 million pixels. Each pixel is made up of a red, a green, and a blue subpixel, resulting in over 44 million individual picture elements on the 27-inch display. Occasionally, a transistor may not work perfectly, which results in the affected subpixel remaining off (dark) or on (bright). With the millions of subpixels on a display, it is possible to have a low number of such transistors on an LCD. In some cases a small piece of dust or other foreign material may appear to be a pixel anomaly. Apple strives to use the highest quality LCD panels in its products, however pixel anomalies can occur in a small percentage of panels.

In many cases pixel anomalies are caused by a piece of foreign material that is trapped somewhere in the display or on the front surface of the glass panel. Foreign material is typically irregular in shape and is usually most noticeable when viewed against a white background. Foreign material that is on the front surface of the glass panel can be easily removed using a lint free cloth. Foreign material that is trapped within the screen must be removed by an Apple Authorized Service Provider or Apple Retail Store.

Since your screen-centric lifestyles aren’t likely to change anytime soon, it’s vital for us to take proactive preventative measures to maintain the long-term health of your eyes. This includes making modifications to your workstation, as well as practicing healthy eye techniques and strategies.

Most computers on the market today are designed with LED backlighting, which enhances the computer screen’s clarity, brilliance, contrast, definition, and graphics. LED backlighting emits blue light waves that radiate at a brighter intensity than that of natural light or other light waves on the light spectrum. The light from a digital display is composed of what is known as HEV light (high-energy visible light). HEV light occurs in the violet/blue part of the visible spectrum.

Our eyes are not naturally equipped to protect against and filter out intense blue light, meaning that the higher energy of blue light waves can be particularly damaging to your lenses and retinas without taking the correct measures. (For example, switching from a screen to a projector.)

Monitors that use LED backlighting flicker through pulse-width modulation (PWM), which enables you to adjust the brightness of your screen easily. If you’re in a sunlit room, you’ll need a bright screen to help you see; when you’re working late at night, you may prefer to dim your screen accordingly.

PWM turns the backlight “on” and “off” quickly at a steady frequency, which decreases the brightness of the screen. This seems like it should be a good thing since you want to be able to fully control the brightness of your screen to adapt to fit your environment and your personal preferences.

The problem is that the computer screen flickers at a very fast rate imperceptible to the human eye as the backlight turns on and off. This flicker causes your pupils to rapidly move from larger to smaller, which in turn causes a multitude of eye issues, including eye strain and eye fatigue.

When you use a non-flicker-free monitor, you are exposing yourself to constant on-screen flickering, which—as we’ve discussed above—can jeopardize the health of your eyes over time. Studies reveal that after only 3 to 4 hours of use of a traditional computer monitor—one that’s not engineered with flicker-free technology – 90% of computer users may experience eye fatigue.

For example, some companies have attempted to protect your eyes from on-screen flicker but have only created monitors that mask the issue or create the impression of being flicker-free.

Conventional computer monitors flicker at a fixed frequency with comparatively longer periods of time between the “on” and “off” states of the backlight. Consequently, the on-screen flicker of conventional computer monitors is very noticeable.

Some devices attempt to solve the problem of on-screen flicker by integrating PWD as well as high refresh rates. These modifications to the LED backlight actually result in an increase in the frequency of the on-screen flicker and shorten the period between the “on” and “off” states of the backlight.

Since these on-screen flickers are incredibly fast for the human eye to perceive or process, this gives a false impression that flicker has been eliminated. However, it fails to protect your eyes, as they still are forced to rapidly adjust to the “on” and “off” backlight states—only now at a faster rate.

Start by setting your display to peak brightness. Turn on your mobile phone camera and point it at your computer screen. Now, with your phone’s camera focused on the screen, adjust the brightness to 50% and then eventually down to 0%.  As you lower the screen’s brightness, any flicker will become increasingly noticeable if it’s a non-flicker free monitor.

By conducting this test, you will be able to finally detect on-screen flickers that are usually imperceptible to the human eye. Once you see for yourself how much harmful on-screen flicker you’re exposed to on a daily basis, you’ll be inclined to purchase a more health-conscious computer monitor.

On-screen flicker isn’t the only problem computer users face. Companies have also tried to create monitors that protect your eyes from harsh blue light waves.

When your computer screen uses a cooler color profile, more harmful blue light can emanate. To protect your eyes, adjust the temperature profile to a setting that uses more warm tones and fewer blue ones.

Maintain a proper viewing distance at your workstation. You should not be situated too far or too close; according to the American Optometric Association, a healthy viewing distance means that your screen should be positioned 15 to 20 degrees below eye level, as well as 20 to 28 inches away from the eyes.

To remedy the constant exposure you receive to digital displays in everyday life, it’s critical that you take breaks to give your eyes time to recover, reducing the effects of eye strain. Follow the 20-20-20 rule: every 20 minutes, you should focus your eyes on a point 20 feet away from the computer screen for a total of 20 seconds.

If you find yourself leaning forward to peer at your screen or squinting to make out a word, it’s time toincrease the text size on your device. Your operating system will allow you to make changes to the size of the text you see across all programs, and may even allow you to choose a preferred typeface to aid you in reading.

Screens are everywhere today. If you work in an office, you use one to edit documents and create spreadsheets; if you work in a store or a restaurant, you use a digital point-of-sale system. When you’re off the clock, you use your devices to watch movies, text friends, and shop for clothes. Even when you’re driving, you’re looking at the GPS or passing by digital billboards.

Have you ever left your TV or monitor on for days, stuck on the same image? You return to your screen, only to find an image burned into the display. No matter what you do, it won"t go away. It is a permanent image burn.

Why do monitors and TVs get image burn? Why can"t manufacturers prevent LCDs and plasma screens from a burnt image imprint? Moreover, what can you do to fix an image burn?

Before flat-screens and crystal displays, most TVs and monitors featured CRT (Cathode Ray Tube) technology. In CRTs, individual pixels comprise a red, blue, and green phosphor component. Depending on the intensity of each phosphor component, the pixel appears to the human eye as a unique color.

When a particular still image remains for too long, the intensity of each phosphor component diminishes at an uneven rate. The result is a ghost image on the screen, which is known as image burning.

This is a very simplified version of how a plasma screen works. However, the main thing to understand is that plasma screens use phosphor material (like CRTs) to turn those photons into images.

LCD and LED do not work in the same way as CRTs, either. LCD and LED screens use backlit liquid crystals to display colors. Although manufacturers market screens using LED and LCD, an LED screen is still a type of LCD. The white backlight filters through the liquid crystals, which extract particular colors per pixel.

LCD and LED displays don"t suffer from the same type of image burn as CRTs and plasma screens. They"re not completely clear, though. LCD and LED screens suffer from image persistence. Read on to find out more about image persistence.

Before you can fix screen burn-in, take a second to understand why these images burn in the first place. LCDs and LEDs don"t suffer from burn-in as seriously as plasma screens. But static images can leave an imprint on both display types if left alone for too long. So, why does image burn happen?

First, let"s tackle plasma screen burn-in. Remember why CRTs experience image burn? When a still image remains on the screen for too long, the phosphor components in each pixel wear out at different rates. The uneven burn rates leave behind a ghost image, forever etched into the screen.

Plasma screens also suffer from phosphor deterioration. Plasma burning occurs when pixels on the screen are damaged through long exposure. The phosphor loses its intensity and only shows the light it was fed repeatedly. In this case, the still image, which causes the burn.

LCD and LED screens can also experience image burn, though the image burn process can take longer to develop into a permanent issue. In addition, LCD and LED screens suffer from another issue, known as image retention (also known as image persistence or an LCD shadow).

Image retention is a temporary issue that you are more likely to notice before it becomes a permanent issue. However, proper image burn can still affect LCD, LED, and OLED screens.

Image retention is a different issue from image burn (although it is a precursor to image burn). For example, you"re using an image of a steam train as a reference point for a drawing. You have the steam train image on your screen for a few hours before you decide to play a video game instead.

When you load up the video game on the screen, you can still see the faint outline of the steam train on the screen. The steam train image will remain for a short while, but the movement and color changes of the video game (or film, TV show, or other media type) should erase the retained image.

The other thing to consider is that LED and OLED image burn-in, when it happens, is irreversible. That"s because of how LED and OLED screens work. Individual pixels within an LED display decay when they emit light.

Under normal use, an LED, OLED, or QLED screen won"t suffer image burn. However, if you leave your screen on a single channel for hours every day, then burn-in can become an issue, as it would with almost any screen.

Issues arise when a screen shows a single news channel 24 hours a day, every day, causing channel logos to burn-in, along with the outline of the scrolling news ticker and so on. News channels are a well-known source of television burn-in, no matter the screen type.

Image burn-in fixes exist for LCD and plasma screens. How effective an image burn-in fix is depends on the screen damage. Depending on the length and severity of the image burn, some displays may have permanent damage.

The best fix for screen burn is to prevent it in the first place. Okay, that isn"t super useful if your screen is already experiencing image burn. However, you should always try not to leave your screen on a still image for too long. The time it takes for an image to burn-in varies from screen to screen, between manufacturers, sizes, and panel type.

Another prevention method is to reduce screen contrast as much as you can. Unfortunately, most screens aren"t calibrated correctly, often pushing the contrast and brightness settings too high.

Lower contrast means the lighting across your screen is more even. This means less strain on specific areas of the screen, which helps protect against image burning.

If your plasma or LCD screen already has image burn-in, you can try turning on white static for 12 to 24 hours. The constant moving of white-and-black across your screen in random patterns can help remove the ghost image from your screen.

Unfortunately, this won"t work for extreme cases. Some TVs will have a built-in pattern swiping option that basically accomplishes the same thing (filling your screen with random patterns).

Pixel-shift constantly slightly adjusts the image on your screen, which varies the pixel usage to counteract image burn. You might have to enable a pixel or screen shift option in your screen settings. Pixel-shift is a handy feature for LED and OLED screens that cannot recover from image burn and should help counteract an LCD shadow.

Other modern screens feature built-in screen refresh functions that the manufacturer will advise using to remove image retention and image burn issues.

The best tool for fixing ghost images is JScreenFix. The original program helps fix monitors with dead pixels, but the same company also released an "advanced" version of the tool, known as JScreenFix Deluxe.

While the Deluxe version uses advanced algorithms to repair burned screens and prolong plasma and LCD longevity, the official site is no longer up and running, and there is no way to download the full version officially.

If you have television burn-in, you can attach a laptop to your TV using an HDMI cable, extend your desktop to the television, and share the white screensaver. Hopefully, that will shift your television burn-in.

The team over at ScreenBurnFixer offers a few different ways you can attempt to fix screen burn on your TV or monitor. As with any other screen burn-in fixes, their chance of working depends on the scale of the issue.

You can head to the ScreenBurnFixer Video page and find a video that matches your screen type, then let the video play for as long as possible (we"re talking multiple hours, not a quick half an hour blast). Alternatively, head to the Chart page and find your device or a device that matches your specifications.

There are several ways you can attempt to fix screen burn-in. The results will vary between the screen type and the level of burn-in. A screen with extensive image burn may not clear entirely, although you might see an improvement.

Some screen degradation over time is understandable. However, if you follow the steps in this guide, you"ll protect your screen from image burn before it becomes a permanent issue.

All screens flicker to some degree — be they TV screens, car navigation displays, monitors, tablets, and yes, even smartphone displays. In this article, we will talk a little about what flicker is, what can cause it (on smartphones in particular), and how we at DXOMARK test for it, quantify it, and measure its impact on the end-user experience.

Given the ubiquity of smartphones, it is unfortunate that the flicker on their displays (especially OLED displays) is still an issue for many people. But wait! Why do they flicker? Well, let’s remember that smartphone display hardware is based on either LCD (liquid crystal display) or OLED (organic light-emitting diode) technology. LCDs don’t emit their own light; rather, they are back-illuminated by a strip of LEDs whose light intensity is quite powerful so as to compensate for the brightness drop due to the low transmission rate of the LCD panel (caused mainly by the RGB color filter). By contrast, in an OLED display, every pixel is itself an OLED that produces its own light.

Since both LCDs and OLED smartphone displays are composed of light-emitting diodes, let’s describe how these diodes are driven. Because of a diode’s intrinsic physical properties, it cannot be dimmed by changing the intensity of the current (mA) without impacting the color of the light. So how do phone manufacturers dim displays? They make use of a technique called pulse-width modulation (PWM), which means that they turn the diodes off and on at varying rates. Because we normally should not be able to see this switching between off and on (in other words, the flicker!), our brains are fooled into perceiving the screen as simply dimmer overall (a phenomenon known as the “brain averaging effect”). How dim depends on how long the diodes are off versus how long they are on: the longer they’re off, the dimmer the screen will appear.

So both LCDs and OLED displays power their light sources differently, but both technologies are subject to flicker effect; however, it is usually more noticeable on OLED displays than on LCDs. For one thing, OLED displays and LCDs show PWM at different frequency ranges — the PWM of OLED displays range from ~50 to ~500 Hz, whereas the PWM of LCDs starts at around 1000 Hz or higher. Second, as the human eye may experience flicker sensitivity up to about 250 Hz (at least for most people), it should come as no surprise that OLED displays are more likely to cause eyestrain than LCDs.

A significant disadvantage to using PWM technology can be that when a display adjusts to its minimum brightness in very dim or completely dark ambient light conditions, the duty cycle is very short and the interval when the diode is off is proportionately much longer (for example, minimum brightness may translate to a 10% duty cycle, meaning that the diode is off for 90% of the period). At lower PWM frequencies, flicker can become much more noticeable, which helps explain why reading text or watching videos in bed at night is more likely to cause headaches and eyestrain than when viewing screens in brighter conditions.

The video below was shot with a Phantom VEO-E 340L camera at 1500 fps (as were the other videos further below), slowed down to 4 fps to show display pulse-width modulation (PWM) — the white areas separated by black lines that extend across the screen when brightness diminishes at regular intervals. You can see the difference between the Samsung Galaxy S20 Ultra 5G on the left, which has a medium duty cycle (around 60%), and the Huawei P40 Pro and the Oppo Find X2 Pro, which have long duty cycles (roughly 90%; the black lines show that the OLEDs are turned off, albeit briefly):

Yes, it’s a cool-looking graph, but what does it mean? How should we read this? Well, first of all, keep in mind that these results correlate with each device’s PWM — the on/off power cycle that helps control screen brightness. The horizontal X axis show the frequency of the oscillations over time measured with the flickermeter in hertz (Hz). The vertical Y axis shows the SPD(dB)— spectral power density in decibels, which is the amount of power associated with one frequency of the signal that the display generates.

Let’s wrap things up by first repeating that flicker on smartphones is caused by the use of pulse-width modulation that turns light-emitting diodes off and on to control screen brightness levels. As we normally perceive flicker via our peripheral vision rather than via our “attending vision” (that is, what we specifically focus our eyes on), the small size of a smartphone screen makes it less likely that we will see flicker on it (unless we hold the phone very close to our eyes) than we might when viewing content on a laptop screen or monitor. When we do see flicker, however, it’s the PWM that is the culprit; and while flicker can be reduced on a phone with a higher refresh rate, you may sometimes see flicker on it anyway if the phone’s PWM is slow (as we saw with the Samsung Galaxy Note20 Ultra 5G).

Finally, it’s also important to remember that some people are more sensitive to noticing flicker than others; in fact, even people who may not consciously perceive flicker may nonetheless be sensitive to it, winding up with headaches or eyestrain after overdoing their screen time. Such people could choose an OLED smartphone with an anti-flicker feature, or one with an LCD. As you can see in the table below, the last entry shows the data for the Xiaomi Mi 10T Pro; since it uses LCD technology, its PWM frequency is so high that it in essence eliminates the flicker issue.

TFT LCD image retention we also call it "Burn-in". In CRT displays, this caused the phosphorus to be worn and the patterns to be burnt in to the display. But the term "burn in" is a bit misleading in LCD screen. There is no actual burning or heat involved. When you meet TFT LCD burn in problem, how do you solve it?

When driving the TFT LCD display pixels Continously, the slightly unbalanced AC will attract free ions to the pixels internal surface. Those ions act like an addition DC with the AC driving voltage.

Those burn-in fixers, screen fixer software may help. Once the Image Retention happened on a TFT, it may easy to appear again. So we need to take preventive actions to avoid burn in reappearing.

For normal white TFT LCD, white area presenting minimal drive, black area presenting maximum drive. Free ions inside the TFT may are attracted towards the black area (maximum drive area)

When the display content changed to full screen of 128(50%) gray color, all the area are driving at the same level. Those ions are free again after a short time;

This problem occurs because of a hardware limitation that is known as "tearing." Tearing is a video artifact in which the top portion of the screen shows a different frame of video than the bottom portion. This is more noticeable during scenes that contain fast motion. There may be a noticeable horizontal line at the point where the two frames meet.

ClearType is a software technology developed by Microsoft that improves the readability of text on existing LCDs (Liquid Crystal Displays), such as laptop screens, Pocket PC screens, and flat panel monitors. With ClearType font technology, the words on your computer screen look almost as sharp and clear as those printed on a piece of paper.

ClearType works by accessing the individual vertical color stripe elements in every pixel of an LCD screen. Before ClearType, the smallest level of detail that a computer could display was a single pixel, but with ClearType running on an LCD monitor, we can now display features of text as small as a fraction of a pixel in width. The extra resolution increases the sharpness of the tiny details in text display, making it much easier to read over long durations.

What was discovered is that word recognition is only subconscious when typographical elements such as the shape and weight of letterforms, and the spacing between letters work together to present words as easily recognized patterns. With these findings in mind, Microsoft began taking a closer look literally at how type was being rendered on screens.

To understand how ClearType works, one first has to understand what makes an LCD screen different from other types of displays. Most screens created images made up of pixels, which when magnified look like single squares. The equivalent of one pixel on an LCD screen is actually composed of three sub-pixels: one red, one green, and one blue (R-G-B). Seen together, these sub-pixel triplets combine to be seen by the human eye as a single pixel.

If we were to look at a single pixel, our eye would see it as in the illustration above. However, if we were to magnify the image, we would see that each pixel is actually made up of three separate subpixels. And so, if when we see white on an LCD screen, we are really looking at red, green and blue stripes.

Traditional computer font rendering assumes that each pixel is either "on" or "off", appearing as tiny black squares. Letters appear jagged on the computer screen because they are formed from many of these tiny squares or pixels. Traditional grayscaling assumes that each pixel has no internal structure, so it smooths the jagged edges but sacrifices edge sharpness. ClearType knows that LCDs are made up of colored sub-pixels. ClearType uses a model of the human visual system to choose the brightness values of the sub-pixels. With ClearType, letters on the computer screen appear smooth, not jagged, yet the edges remain sharp.

This is a close-up of the "m" when rendered on screen without ClearType. Notice how the "m" has hard, jagged stair-steps or "jaggies" in the stems, or "legs" of the "m".

This is a close-up of the "m" when rendered on screen with ClearType. Notice how the "jaggies" are much more subtle and the letter is rendered more smoothly.

Picture elements on an LCD screen are actually comprised of individual horizontally-oriented red, green and blue sub-pixels. For instance, an LCD screen that has a display resolution of 800x600 pixels actually has 2400x600 individual sub-pixels. The human eye is not capable of differentiating colors on such a small scale, so a combination of these three primary colors can emulate any intermediate color. Sub-pixel font rendering takes advantage of this by antialiasing at the sub-pixel level instead of at the pixel level.

To see if your screen is set to its native resolution, try looking at the following eye test image. The image is made up of many vertical black lines. If you see alternating bands of white running vertically through this image, you are probably running at a non-native resolution.

Many Apple products use liquid crystal displays (LCD). LCD technology uses rows and columns of addressable points (pixels) that render text and images on the screen. Each pixel has three separate subpixels—red, green and blue—that allow an image to render in full color. Each subpixel has a corresponding transistor responsible for turning that subpixel on and off.

Depending on the display size, there can be thousands or millions of subpixels on the LCD panel. For example, the LCD panel used in the iMac (Retina 5K, 27-inch, 2019) has a display resolution of 5120 x 2880, which means there are over 14.7 million pixels. Each pixel is made up of a red, a green, and a blue subpixel, resulting in over 44 million individual picture elements on the 27-inch display. Occasionally, a transistor may not work perfectly, which results in the affected subpixel remaining off (dark) or on (bright). With the millions of subpixels on a display, it is possible to have a low number of such transistors on an LCD. In some cases a small piece of dust or other foreign material may appear to be a pixel anomaly. Apple strives to use the highest quality LCD panels in its products, however pixel anomalies can occur in a small percentage of panels.

In many cases pixel anomalies are caused by a piece of foreign material that is trapped somewhere in the display or on the front surface of the glass panel. Foreign material is typically irregular in shape and is usually most noticeable when viewed against a white background. Foreign material that is on the front surface of the glass panel can be easily removed using a lint free cloth. Foreign material that is trapped within the screen must be removed by an Apple Authorized Service Provider or Apple Retail Store.