singer xl 580 lcd panel not working supplier

There are now several versions of the software for SINGER® Futura™ and AutoPunch available on the market. The most current is version 1.0.0.2. To determine what version of either software you have, you will find this information around the inside rim of the CD at approximately 4 o"clock. Before loading AutoPunch into your computer, check the version and then follow the steps below.

This machine is on the top rack of the Singer XL sewing & embroidery machine series. It has the most features among the 3 Singer XL machines. What these features are, and how different the XL-580 is from the XL-400 and XL-550 will be discussed in the Singer XL-580 review. Happy reading.

Endless hoop? Ever heard about it? I personally haven’t until I came across the Singer XL-580 Futura. It is a dual purpose computerized machine that promises to sew and embroider and produce great results for both tasks. And yeah, a number of exclusive Singer features. The machine runs on 120V. Obviously, Singer made this machine (and all other Singers) with just the US and Canadian market primarily in mind. I wonder if they even considered expanding their market, making euro compatible machines will be a great start… Anyway, before I totally drift off-topic, let us start with the differentiator.

3 things make the XL-580 different from its ascendants. First is the number of built-in/ pre-loaded embroidery designs it features. It comes with 250 designs as opposed to the 125 that the XL400 and XK550 have. 50 out of the 250 are “Endless Designs” that is ideal to use on borders/ fabric edges. Which brings us to the second thing, the XL-580 comes with an endless embroidery hoop along with the standard small and large hoops. Lastly, an XL-580 purchase already includes the handsfree pressure feet lifter and an assortment of Singer design software.

Aside from the above-mentioned upgrades, Singer has retained their exclusive Singer-innovated features as well as the standard sewing machine features.

SwiftSmart™ Threading System – This allows the user to thread the machine with his eyes closed. Ok, you got me there. That was a bit of an exaggeration. But seriously though, this Singer developed threading system saves you from the tedious process of threading a needle.

Drop & Sew™ Bobbin System – With this feature, you do not need to manually raise the end of the bobbin thread after placing the bobbin. As long as you followed the right bobbin orientation and thread direction, you can have one less thing to take care of.

Direct Drive Technology – As opposed to other machines that use a drive to run the needle (which has a tendency to get misaligned), the Singer 8770 has the needle bar geared directly to the motor. This avoids the risk of misaligned drive and makes each thrust of the needle more powerful.

One common issue with Singer XL-580 Futura is its prone to thread breakage and the auto-tension malfunction. However, this can possibly be solved with following recommendations. What do I mean? I’m talking about the use of thread netting that tends to be disregarded. It does make a lot of difference when it comes to keeping the right thread tension and avoiding thread breakage due to it.

Also, it would be nice if Singer can level up the design software that comes with the package. Though it doesn’t run on DOS or Lotus hahaha, a newer UI would be great.

For Creativity that Knows No Limits! The SINGER Futura XL-580 embroidery and sewing machine includes innovative features that allow you to do more than ever before. With an endless hoop, knee lifter for hands-free presser foot lifting, extra-large sewing space for quilting and 250 built-in embroidery designs � including 50 endless designs � it�s just what you need to make your sewing creativity truly limitless.

Convenience features like the SwiftSmart threading system with automatic needle threader, Drop & Sew bobbin system with automatic bobbin thread pick-up, and presser foot sensor make getting started quick and easy. Six StayBright LED lights keep your extra-large sewing space well lit when working on big quilting and sewing projects.

Get the same quality embroidery results as high-end embroidery machines but at a fraction of the cost by using your own PC. Simply connect your PC to the Futura XL-580 sewing and embroidery machine via the included USB cable, use the included software with built-in tutorials, and send the design to the machine. Push a button and you"re embroidering.

New innovations like a knee lifter for hands-free raising and lowering of the presser foot, USB Key so you can edit embroidery designs without being connected to the SINGER Futura embroidery machine and 250 built-in all new embroidery designs keep you ahead of the curve.

Manufacturer of a wide range of products which include Usha Janome MB 7 Sewing Embroidery Machine, Singer Futura XL 550 Sewing Embroidery Machine, Singer Futura XL 580 Sewing Embroidery Machine, Brother PR670E Sewing Embroidery Machines, Brother Innov-IS V5lE Sewing Embroidery Machine and Brother Innov-IS NV800E Sewing Embroidery Machine.

World`s First" home-use seven-needle embroidery machine.The MB-7 is the perfect tool to help you conquer your next embroidery project. This innovative machine is built to work with embroidery formats used by industry professionals such as .jef+, .jef and .dst. With 50 built-in embroidery designs and 10 fonts for monogramming, a USB port to easily import designs and a maximum speed of 800 SPM, the possibilities are endless. All embroidery operations are noticeably faster and smoother on the MB-7. You will be impressed with your project`s professional-finished results.

This state-of-the art sewing machine is built to be highly versatile. It offers precision sewing, embroidery editing capabilities, and endless creative possibilities in a single hi-tech machine. Professional-style embroidery has never been so simple, as this dream machine includes Wi-Fi capability making it easy to export embroidery designs from an iPad or a computer straight to the machine, and a full color LCD touch screen, both of which help scale up one’s creativity.

A computerised embroidery machine, the Memory Craft 200 E is ideal for embroidering up to 140 X 140 mm designs. Multiple font sizes are available for each font to design monograms and a USB Port helps import customized designs. Along with this the free Digitizer Jr V5 software allows one to edit existing designs and making select custom designs. 73 built in designs and a backlit LCD screen help scale up one’s creativiFeatures Single needle computerized embroidery machine

Full color LCD touchscreen- 5”. On-screen editing functions include enlarge/ reduce, rotate, flip, drag and drop, arc, combine, copy and paste, grouping, corner layout, single color sewing, zoom

You are unique! Why not express that in a way that truly reflects your personality and makes you stand out? With the PFAFF® creative™1.5 sewing and embroidery machine it is easy and exciting to create one of a kind designs with a stylish twist. By using all the great advantages from the machine and the Embroidery Intro PC Software you’ll see your visions come true, stitch by stitch. So, let’s go spectacular!The Original IDT™ System The time-tested PFAFF® Original IDT™ System guarantees the optimal feed you expect. Everything stays in place. Lightweight and silky fabrics don‘t pucker; stripes and plaids match perfectly; curved seams are easy, with very little pinning required.Large Embroidery Area

At the heart of the a7 IV is a new 33MP BSI-CMOS sensor. This represents a move away from the 24MP chip used by the a7 III and its immediate Panasonic and Nikon rivals. Given that BSI sensors are already widely used in the current generation of cameras, we"re not expecting huge leaps forward in image quality. A slight uptick in detail and comparable low light performance is the most likely thing we can expect, in terms of image quality.

In terms of autofocus, the improvements over the a7 III should be fairly significant, not so much because of the promise to focus in conditions that are one stop darker (–4EV with an F2 lens) but because that camera was one of the last Sonys that didn"t integrate Eye AF into its main AF system, and relied on a much more primitive AF tracking system. The a7 III could detect human eyes, but it couldn"t seamlessly and dependably switch between eye, face and body tracking if you set the camera to focus on a person.

The a7 IV also offers the ability to live stream video over its USB connection using the audio and video standards (UVC/UAC) that are part of the USB standard. This allows a choice of HD or FullHD resolutions with FullHD available at up to 60fps. There"s also a 4K option but this only supports 15 frames per second, which gives a dreadful stop-motion look to the footage. Connection is designed to be as simple as possible, using the Imaging Edge Webcam software for Mac or PC. A connection via smartphone is also possible, though audio may not be available at resolutions above HD (720).

The downside of this added flexibility is that you need to engage HEIF capture before you can engage the Hybrid Log Gamma (HLG) color/gamma mode, rather than having both settings change to match one another. It"s worth trying, though: images shot in HLG can show much more of the camera"s dynamic range to give a much more lifelike version of your image if viewed with an HDR-capable TV.

This table should make clear that the a7 IV is well specced, but not to the point of standing out from its less expensive rivals. As such, it"s going to be the real-world performance of the AF system, the degree of rolling shutter in its 4K footage, and its ability to maintain its 10fps burst rate for many hundreds of images that will need to set it apart.

More than the ergonomic changes, we"re delighted to see the a7 IV gain the improved menus and expanded touchscreen utilization first seen in the a7S III. The menus now have their section tabs down the left-hand side of the screen, meaning you"re only ever a click or so away from being able to jump between tabs. They"re also touch sensitive, so you may not need to click or nudge anything at all.

The a7 IV uses the same NP-FZ100 battery as the a7 III and other more recent Sony cameras. It"s a usefully hefty unit that, combined with the relatively modest viewfinder res, lets the a7 IV achieve a CIPA battery life rating of 580 shots per charge using the rear screen and 520 shots per charge using the EVF.

As always, these figures are more useful for comparing cameras, rather than getting an idea of exactly how many shots you"ll get (in our experience, getting double the rated number isn"t unusual with a new battery). We tend to find a rating of over 500 shots per charge means not really having to worry about battery life in anything but the most intensive pro sports or wedding shoots.

What"s clearly changed, in the meantime, is the positioning. The original a7 was launched at what was then a record low price for a full-frame camera: $1700, body only. Even taking inflation into account, that"d still be a hair under $2000 in today"s money. The a7 IV"s price is a significant increase over this, and it"s notable that Sony now offers the a7C for more price or size-conscious buyers. This provision of a relatively up-to-date sister model, rather than simply lowering the prices on outdated models is a welcome change. The a7C might not have the improved menus of the a7 IV but it doesn"t feel as unrefined and clunky as the Marks I and II do, by comparison to the latest cameras.

Sony seems very keen to say that the a7 IV has gained many of its improvements from the flagship a1, which we think risks implying a closer connection than actually exists. While it is not untrue that the a7 IV has some features that arrived with the a1, the new camera doesn"t have the Stacked CMOS sensor that provides the brute power underpinning the a1"s performance. In many instances, it"s fairer to point out that the a7 IV"s features are shared with the video-centric a7S III. Still not a bad thing to be able to claim, but perhaps setting more realistic expectations, in terms of how much star quality you expect to rub off on the more mass-market model.

The first thing that should be apparent is that the a7 IV"s 33MP sensor can capture a lot of detail and, as we saw in our real-world samples, JPEG color that"s directly comparable with the best of its peers. The higher pixel count, combined with Sony"s JPEG sharpening makes more of the fine detail than its rivals. Moiré makes an appearance, but it"s not overwhelming, which suggests there is an anti-aliasing filter, but perhaps not an especially aggressive one.

This additional noise can"t solely be blamed on the pixel count, though, since it"s a fraction noisier than some of its higher resolution peers. Overall this is a good, but not ground-breaking, performance with detail capture appearing to be the a7 IV"s strong suit.

Note that you"ll need to turn off Raw capture then select HEIF files, then engage "HLG Still Image" mode if you want this to work. Simply shooting HEIF files and using the HLG picture profile won"t work. Sadly you can"t shoot Raw and HEIF, and there"s no in-camera Raw conversion option to generate an HLG HEIF from any Raws you"ve shot.

Autofocus is such a broad subject, with different subjects requiring different modes and different photographers preferring different approaches, that it"s almost impossible to give a comprehensive and definitive assessment of its performance. We have used the camera in a variety of situations and with different lenses but cannot cover every aspect of the camera"s performance.

The a7 IV makes it very easy to get the face of your chosen subject in focus. But we found a lot of the images it takes are very fractionally front-focused. It"s something that only really becomes noticeable if you use a very wide aperture and look very closely at the results, but it"s not quite as pinpoint accurate as the previous generation of Sony cameras.

If you"ve selected a person in this way the camera will determinedly track that person, even if that person looks away. Even when we placed another person closer to the camera and nearer the middle of the frame, it continued to track our subject, even when they looked completely away and the camera could no longer see their face or eye.

The addition of 60p capture is another step forward for videographers who want to more accurately be able to capture fast motion or to provide some high-res slow-motion footage in a 24, 25 or 30p project. The 60p mode is only available from the Super35/APS-C region of the sensor. There"s a tiny bit of oversampling going on (it"s a 4.6K chunk of the sensor) but it"s not going to be quite as detailed as the full-width footage taken from 7K capture. The APS-C crop, along with the faster shutter speeds you"re likely to use for 60p capture are (unless you can open up your aperture to compensate) going to impose a noise penalty on the 4K/60p output, which is worth being aware of.

The a7 IV"s image quality is extremely good, with excellent levels of detail, extensive dynamic range and attractive JPEG color. However, it"s not significantly improved over its predecessor or its rivals: you"ll get more detail in low ISO situations but this small gain seems to come with slight decreases in dynamic range and high ISO noise performance. The margins are tiny but it"s hard to see a net benefit to the new chip.

Autofocus is powerful and can be very simple to use. For a majority of subjects, you can just point an AF point at your subject (or let the camera choose one), and be confident that the camera will track it and put focus in the right place. We get the sense that it"s not quite as pinpoint accurate as the previous generation of models when it comes to focusing on eyes, but it"s much quicker and easier to use.

Please do not reproduce any of these images on a website or any newsletter/magazine without prior permission (see our copyright page). We make the originals available for private users to download to their own machines for personal examination or printing (in conjunction with this review). Please refrain from using them for any commercial purposes.

SINGER FUTURA XL-550 PROBLEMS AND FIXES. I purchased my Singer Futura XL-550 in September 2014, but only after doing a great deal of research by reading 100’s of pro’s and con’s on the XL-400 and XL-550. The biggest complaint about the Futura was thread problems & breaking needles which I figured was operator error, that they made a mistake and blamed it on the machine. But I started having these problems right away; in the first 10 minutes I had 5 or 6 bird’s nests and that happened while I was just trying out the Futura as a sewing machine. And while trying to embroider something I broke my first needle within 2 minutes and 5 more needles in the first hour. I also had problems with the large hoop. It just would not hold the fabric in place and I was not able to embroider a simple pattern that came with the machine. Also, I would get this error message “wrong size hoop installed” about a minute after I started an embroidery project. After all the research I did, to say I was pissed is putting it mildly. I was ready to take an ax to this “machine” (I won’t write down what I really said about this machine). It turns out that my first assumption about it being operator error was wrong, and I want to APOLOGIZE to everyone that post their problems; the ones that I did not believe. I was feeling like an idiot for buying this piece of junk and that old saying of “if it’s too good to be true” is right, this Singer Futura is a real problem. Singer at one time stood for QUALITY, but lately Singer’s quality SUCKS. By making their machines oversea in places like Vietnam and others, the new owners of Singer Company appear not care about their quality control because it is not there. And YES, there is a learning curve to all new equipment, but it’s hard to learn how to use the machine when it has so many problems that are clearly out of the operator’s control. The Futura XL-550 sewing abilities are okay, but the embroidery part has problems, and I bought this machine to do embroidery. If the manufacture had tighter quality controls, people would not be having these problems. After trying to get my Futura to work, I found a number of problems with it. And in time I came up with some modifications that I used to repair my Futura. I took each problem one at a time and broke it down, and I was able to find the reason for each problem and then I worked out a solution for each problem. I found that my Futura was having 5 major problems that had to be worked out if I was ever going to be able to embroider anything. Here are the 5 problems I was having: 1. Birds nest in the bobbin case, 2. Breaking needles, 3. Large hoop problem, 4. Wrong size hoop, and 5. Machine would stop over and over on a new project. These are the problems I was having with my Singer Futura XL-550, now for the modification.PROBLEMS AND SOLUTIONS The modification I made to my Singer Futura XL-550 has improved its abilities by eliminating the birds nest in the bobbin holder area and stopped the needles from breaking. And what I had to do to fix the problem with the large hoop. I had to deal with these problems and here is the list of problems and the modifications I made to fix them:1. Problem #1, Birds nest in the bobbin case:Every time I started a project within minutes I would have a mess of thread twisted up under the cover plate of the bobbin holder, what a headache. But after digging out all the thread and removing the bobbin holder I found the problem, a nick in the bobbin holder; it was made when the needle nicked the outer edge of the bobbin holder, the black plastic edge. The thread would snag on the nick every time I tried to use the machine.Solution: I filed off about 1/32 to 1/16 of an inch to remove the nick, and I have not had that major bird’s nest problem since then. If you don’t have a file you can use an emery board, the plastic is not that hard.Update to Problem #1: I had to replace the bobbin holder, the plastic does not hold up; it would last longer if it was made from a stronger, harder plastic or maybe some sort of metal.2. Problem #2, Breaking needles:Within 1 hour of using the Futura XL-550 embroidery part I broke 6 needles, the first needle was in the first two minutes. What I found was the needle was hitting the edge of the bobbin cover plate. The needle was hitting the edge about 1/32 to 1/16 of an inch above and below the needle slot.Solution: What I did was to file a small notch into the bobbin cover plate right to the point of impacted. The small notch is only 1/32 to 1/16 of an inch on both sides of the needle slot. After I filed the notches into the cover plate I have not broken one needle. You will need a very small round file to notch the cover plate and it will take a little time to do the job.Follow up: The notch I filed into the cover plate was not the reason for the nick on the bobbin holder. The nick in the bobbin holder happened within minutes while trying to use the sewing machine setup.3. Problem #3, Large hoop problem:The large hoop was not holding the material while I was running an embroidery design. And believe me I tried everything to get the hoop to hold the material, I even hand stitched the material in the hoop to help the hoop hold the material, but it didn’t work. I used the Futura customer help website to get some help with the large hoop. After waiting on hold for over and hour the person in Customer support gave me the "RUN AROUND" about “are you making sure that the hoop is tight and the material makes a drum sound. Is the notch & grove lined up“ and stuff like that. I told them the hoop was to thin and to flexible to hold the material and that I wanted it replaced. And that only happened after I sent them a picture of the hoop with the material hand stitched into the hoop. They also told me that the hoop replacement they will be sending me is the same as the one that came with my Futura XL-550. Well, after three weeks of waiting the replacement hoop finally showed up. This replacement hoop was not the same, so they lied to me about the replacement hoop. That replacement hoop was about a half an inch longer on the long side and overall was about 1/16 to 1/8 of an inch thicker then the one that came with the machine. But even with these differences in size the replacement hoop still did not hold the material tight enough; it would slip out just enough to mess up the design.Solution: The modification I came up with strengthened the inner hoop a great deal. What I did was to epoxy a thin aluminum plate to the bottom of the inner hoop. The plate has to be cut to fit and filed and sanded smooth. Now I have the tools to fabricate this sort of thing and I know not everyone can do this. I"m sorry, but this is the only solution I was able to come up with to strengthen the hoop, I also had to add some anti-slip strips to the inside edge of the hoop (you can get the anti-slip strips at any hardware store, it looks like sandpaper with an adhesive backing) and this helps to hold the material from slipping.Update to Problem #3: After I made these modifications I still have to keep an eye on the fabric to make sure it does not slip. If the manufacture would place a small steel rod inside the plastic of the inner hoop that would stiffen up the inner hoop and would help to solve this problem.4. Problem #4, Wrong size hoop:This problem would come up just after I started to embroider. And it would happen every time; I would turn off the machine and restart it. I would remove the hoop and put it back in, nothing worked. The problem is between the hoop and the switch that the hoop touches when it is installed.Solution: The problem happens when the hoop is installed, the switch that the hoop touches is not placed at the right spot or the hoop’s small knob that touches the switch is not the right size. I fixed it by placing a piece of duck tape on the hoop’s knob, it was just enough to fix this problem.Update to Problems #4: The tape is only a quick fix, I have tried some epoxy on the knob to build it up but it did not hold. For now the tape will have to remain as the fix but I will keep trying.5. Problem #5, The Machine would stop over and over on a new project:I found that the software is somewhat old and has some problems, but you can work around them. When I made a modification to a project and send it to the machine it would not embroider. It would start up for 10 or 15 seconds then just stop and no matter what I did it would stop over and over.Solution: Before you try to embroider that project you just modified, you have to save it (use a new name for that modified project). After you have saved it turn off the Futura XL-550 and close down the software. After you do that, restart the Futura machine and the software, you have to do this to clear out any software problems. You can re-open your saved project and send it to the machine. I know it’s a problem to do that every time you make a modification to a design, but it’s the only way I have found to get around this problem.MY STAR RATINGThe Futura XL-550 “OUT OF THE BOX” gets an overall rating of 1 stars, that"s only because Amazon will not let you give a zero star rating. The sewing machine part is okay and gets 3 stars, but the sewing machine is not why I bought this machine in the first place; I bought this Futura for its embroidering abilities and that part gets a minus 1 stars. I know that many of you are having problems with your Futura and YES “OUT OF THE BOX” it should work without any problems. Don’t give up, most of these machine can be fixed with a little work (and YES, Singer should pay for all the shipping to get it fixed), but they won’t do that. But, after I made the modification to my XL-550 I have enjoyed embroidering custom patches for my Karate Studio and making gifts for friends and family. So, after ALL the modifications to my Futura “My Modified Singer Futura XL-550” gets an overall 4 stars, I reduced the score by a half stars because it is a very noisy machine and another half star because you have to watch the Futura throughout the embroidery project. I came up with these fixes to solve the problems I was having, and I hope this helps you.UPDATE: I found a service manual for my XL-550 online, and believe me you need this service manual. I use my Futura a great deal, so every 3 or 4 months I clean and lubricate it and adjust the X-Y axis points on the embroidery arm and also reset the needle depth point. If you use your machine like I do, you really need to do this servicing. I am not going to waste my time and money to ship my Futura to someone that might fix it. If their quality control is not there (AND IT‘S NOT), can you really trust them to service your machine? I hope the modification I came up with helps you.I have been using my XL-550 for more then 3.5 years now and I have made many custom patches for the students at the Karate studio and for friends and family. I even embroider the student’s karate belts with their name and belt number along with the studio name. I searched the internet for a belt hoop for my Futura XL-550 but no luck, so I fabricated a belt hoop for my Futura and it works great.TO THE SINGER COMPANYI have one thing to say to the people that own the Singer Company now. If you want people to keep buying your products you need to upgrade your quality control from nothing (which is what you have right now), and make "QUALITY" the companies most important thing you can offer. Bring back the “SINGER QUALITY“, stand by your product; and if a customer that just bought your product is having problems with it "FIX IT FOR FREE". Pay for the shipping (both ways to a repair center) because your company sold that customer a defective product, and STOP giving your customers the old "RUN AROUND".One last thing for anyone that is thinking about buying a Futura XL-550, you must understand what I"m saying. I use my machine a great deal but there are some things you just can not do with THIS MACHINE. You can not walk away from your machine; "YOU MUST STAY WITH YOUR MACHINE THROUGHOUT THE ENTIRE PROJECT". This machine must be watched at all times, you just can"t set up your project start up the machine and come back an hour or two and find a finished project. You have to sit with your machine throughout your project from the every beginning to end. So, if you are looking for a machine that you can set up and then just walk away, "DON"T GET THIS MACHINE".

The Singer has been making solid sewing machines since the 1850’s. Their sewing machines were known for being so reliable that they were passed down for generations.

Singer ran into some problems in the 1960s and 70s. The quality went downhill. Eventually, the company ended up in the hands of a major corporation that also owns the Pfaff and Husqvarna companies.

You might think the more expensive the machine, generally speaking, the better it will run. That’s not true. Brother and Singer produce very good inexpensive sewing machines for those on a low budget.

I will say that if you have a very low budget, go with the Brother XM2701 or the XL2600i. They have more features than the Singers low budget sewing machines.

In Singer versus Brother sewing machines battle, it came down to personal preference and brand preference. (Yes, I do still own my Harley Dyna Low Rider. I need to get out driving again soon, but I’m having too much fun sewing.)

Both Singer and Brother have a specialized line of heavy duty sewing machines. They have a sturdier metal frame than a regular sewing machine. This allows them to sew through thick layers without burning out the motor.

The difference between the Singer sewing machines is the number of built-in stitches available. They’re all great for beginners and people who do a lot of sewing items that use mostly straight stitches.

So, I hear you asking, doesn’t Brother have a heavy duty machine? Yes, they have. Just like the Singer, these are mechanical machines with no computerized anything.

For me, Singer wins the battle hands down when it comes to heavy-duty machines. Singer heavy duty machines have been around longer, more popular than Brother heavy duty machines and are sturdier.

SE600 has color and bigger LCD as compared to the black and white smaller LCD of 9960 (for better display, Singer has a 9985 model which would cost you more).

Singer 9960 wins if you need more sewing speed and stitches, but SE600 is better for embroidery and has a more prominent and colorful display. Ultimately, It comes down to your sewing and embroidery needs.

Singer provides downloadable software for you to use to create designs. Singer also has a universal power supply so you can take the machine internationally. And Singer has a free online owner’s class that you can take.

The Singer has 215 built-in stitches and 250 embroidery designs. It has a small LCD. People find it to be a good sewing machine, but some people had difficulties getting the embroidery to go smoothly.

One very cool quality of the Singer is that it includes a knee lifter attachment. You can use it to raise and lower the presser foot with your knee to allow you to keep your hands on what you’re sewing.

The Singer comes with 10" X 6", 4" X 4" and 6.75" X 4" endless hoop. The Brother has 5"x 12" and 5" x 7" hoops. Bother have the multi-hooping capability.

So while the Brother SE1800 could be good for beginners, the Singer 580 isn’t. Unless you’re a super patient beginner, who doesn’t mind making lots of mistakes while trying to figure something out. I’m not that sort of person.

Although the Singer has 40 more stitch options, the Brother is a more versatile machine. The Brother has more different types of stitches as compared to the Singer which has most of its lead in decorative stitches.

If you want to do decorative stitching on clothing or linens, then you’ll want the Singer because it has 76 built-in decorative stitches compared to only 20 on the Brother.

The Singer One Plus has 221 stitches built-in. You can use the interface to elongate and mirror stitches. Plus there’s built-in memory to save and edit the stitches later. There are threading system and an automatic needle threader.

Both are the amazing machines. So honestly, neither wins. If you need more stitch options, then pick the Singer One plus otherwise go with the Brother XR9550.

*Estimated delivery dates- opens in a new window or tabinclude seller"s handling time, origin ZIP Code, destination ZIP Code and time of acceptance and will depend on shipping service selected and receipt of cleared payment. Delivery times may vary, especially during peak periods.Notes - Delivery *Estimated delivery dates include seller"s handling time, origin ZIP Code, destination ZIP Code and time of acceptance and will depend on shipping service selected and receipt of cleared payment. Delivery times may vary, especially during peak periods.