white backlit lcd module in stock

NHD-14432WG-ATFH-V#T | Monochrome Graphic Module | 144x32 Pixels | Transflective LCD | White Backlight | FSTN (+) Positive Display | Built-in Positive Voltage

Newhaven 144x32 graphic Liquid Crystal Display module shows dark pixels on a white background. This transflective LCD Display is visible with ambient light or a backlight while offering a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-14432WG-ATFH-V#T display includes built-in positive voltage. It has an optimal view of 6:00, operates at 5V supply voltage and is RoHS compliant.

NHD-12864WG-FTTI-VZ#000 | Monochrome Graphic Module | 128x64 Pixels | Transmissive LCD | White Backlight | FSTN (-) Negative Display | 2x10 Straight Vertical Header (Molex 10-89-7201 or equiv) | J1= SHORT, RA=18ohm | Built-in Negative Voltage

Newhaven 128x64 graphic Liquid Crystal Display module shows white pixels on a black background. This transmissive LCD Display requires a backlight for visibility and offers a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-12864WG-FTTI-VZ#000 display includes a 2x10 straight vertical header as well as built-in negative voltage. It has an optimal view of 6:00, operates at 5V supply voltage and is RoHS compliant.

These bright white LED panels are the same sort used in backlights for LCD displays, usually tucked just behind the display. The LEDs are encased in acrylic to produce a beautifully even light, and there"s a foil reflector behind to maximise the light bounced forward.

These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they"re tucked behind the LCD and shine white light from below. Here, we"ve got the LEDs available individually and they"re really cool! Each LED is encased in a 3.5mm thick strip of a acrylic. The acrylic strip is a special type that is very good at diffusing light, so even though there is only one single white LED, it provides near-uniform lighting. The other flat side of the strip has a reflector on it so you only get light from the top (otherwise the backlight would lose 1/2 the brightness unnecessarily).

Typical LCDs are edge-lit by a strip of white LEDs. The 2D backlighting system in Pro Display XDR is unlike any other. It uses a superbright array of 576 blue LEDs that allows for unmatched light control compared with white LEDs. Twelve controllers rapidly modulate each LED so that areas of the screen can be incredibly bright while other areas are incredibly dark. All of this produces an extraordinary contrast that’s the foundation for XDR.

Converting blue light to white is a difficult process that requires extremely precise color conversion. It’s why most display makers use white LEDs. Pro Display XDR accomplishes this conversion with an expertly designed color transformation sheet made of hundreds of layers that control the light spectrum passing through them.

With a massive amount of processing power, the timing controller (TCON) chip utilizes an algorithm specifically created to analyze and reproduce images. It controls LEDs at over 10 times the refresh rate of the LCD itself, reducing latency and blooming. It’s capable of multiple refresh rates for amazingly smooth playback. Managing both the LED array and LCD pixels, the TCON precisely directs light and color to bring your work to life with stunning accuracy.

This graphic LCD module acts as a shield for Arduino Uno-style microcontrollers. The pins on the carrier board match up to the Arduino Uno"s ports, so the module simply presses on and is fully and correctly connected. Plus, this carrier board is able to be connected to either a 3.3v logic level or a 5v logic level device. (Read our blog post if you have questions about logic level.)

This module is also available with a white-on-blue graphic display, or as a fully built kit with an included Seeeduino (Arduino Uno clone) loaded with code to demonstrate the graphic display.