toshiba lcd panel lock factory

You may be able to turn the Panel Lock feature off by pressing the “Volume Down” button on the front of your TV for more than 10 seconds. Save your PIN code in a secure location where it is accessible only to you or other authorized persons.

To factory reset your Toshiba television, you’ll need to grab your remote and press the Menu button. You will then see the settings icon in the upper right-hand corner of your screen. You will need to navigate to that icon and select it. Next, you will see the Storage & Reset menu.

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

On average, Toshiba TVs will last up to 7 years if properly used and maintained. As the TVs approach the end of their lifespans, they often show some signs that they may be on their way out. You are probably eager to know the signs Toshiba TV will show when it’s time to replace it.

Reset Your Toshiba Smart TV: Switch off the TV for few minutes, then press and hold the power button on your TV for at least 30 seconds to reset it. Still it is not working, it may be problem with defective power supply board then replace the board.

At some point, you may desire to reset your Toshiba television. It might be a good idea if you’re experiencing quality issues or a glitch of some kind. Here’s some information about how you can conduct a quick reset on your Toshiba television system.

You can perform a soft reset on your Toshiba TV in one of two ways. You can use your remote to press the power button to turn the television off. Wait about 30 seconds, press the power button on your remote again, and allow the television to reboot.

The other way you can reset your Toshiba is by disconnecting the power cord from it. Leave the television unplugged for 30 seconds and then plug it up and restart it. This simple reset method may solve your issue. If you believe your television has more complex issues, you must perform a factory reset. A factory reset will return the television to the way the manufacturer set it before you purchased it.

You might have to implement a full factory reset on your Toshiba TV if you intend to sell it to another person. You may also want to conduct a factory reset if you would like to start fresh with the configuration the way it was when you first purchased the TV. All of your personal and stored data will be erased during this process.

To factory reset your Toshiba television, you’ll need to grab your remote and press the Menu button. You will then see the settings icon in the upper right-hand corner of your screen. You will need to navigate to that icon and select it.

You might feel that the remote control you’re using for your Toshiba needs to be reset. You may be correct. You might first want to try swapping your batteries, as bad batteries can cause a wealth of issues. If the battery swap doesn’t help you, you can proceed to the next step and reset your remote control.

To reset your Toshiba remote control, you can use a number of methods. First, open up the back of your Toshiba remote control and remove one of its batteries. Unplug the television unit from the wall socket and then wait 60 seconds.

At some point, you might want to reset your Toshiba TV, but you might have misplaced your remote. Don’t worry because there is a way to do that. It’s super-easy if you have a Fire TV and a smartphone on your person. You can do it without a smartphone as well.

To reset your Toshiba television without a remote, you need to look for a power button on the device. The power button is on the left-hand side on Fire models. It may be on the other side for other models.

First, pull the power plug to the TV out of the outlet. Next, press and hold the power button on your Toshiba television. Wait just a few seconds, and then plug the television back in as you continue to hold down the power button. You can let go once you see the television come on and show the Toshiba logo.

It might alarm you to see your Toshiba television suddenly display a blue or black screen with no picture. However, you don’t need to worry. You can reset your TV if this happens to you, and it may turn back on in perfect working order.

Your Toshiba may be showing a blue screen because you have it set to pick up a picture from the wrong input device. Try changing the input device on your remote control to see if that resolves the problem. If it doesn’t work, you’ll need to reset your television.

You might want to reset the Wifi settings on your Toshiba television and reconnect any devices you had attached to it. Maybe you’re trying to troubleshoot an internet issue. You can easily reset your router by unplugging it and leaving it off for 30 seconds. Pressing the reset button on the router is another option. Both procedures will cause the router to reset. Try to reconnect your television to the Wi-Fi after you finish that process.

You can decide to do a factory reset to your Toshiba television if you want to erase all the data you have on there, including your Wifi settings, and start anew. You do this by going to the Home screen, navigating to Settings, Device, and Software, and then restoring to factory default.

The effectiveness of the procedure depends on the model of Toshiba television you have. You may need to press a RECALL button if you have a different model or an older television. If that procedure fails, try pressing the Home button for exactly 10 seconds. Release the button and wait 30 seconds before you test the remote to see if it’s working now.

Integrated High Definition LCD Television 46UL610U 55UL610U 65UL610U Owner’s Record The model number and serial number are on the back and side of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. For an overview of steps for setting up your new TV, see page 12. www.support.toshiba.com Note: To display a High Definition picture, the TV must be receiving a Model number: High Definition signal (such as an over-the-air High Definition TV Serial number: broadcast, a High Definition digital cable program, or a High Definition digital satellite program). For details, please contact your TV antenna installer, cable provider, or satellite provider. © 2011 TOSHIBA CORPORATION TD/M VX1A00195300 All Rights Reserved

Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your CHILD SAFETY: new LCD TV. Before operating your LCD TV, please It Makes A Difference How and Where You Use Your Flat read this manual completely, and keep it nearby for Panel Display future reference. Congratulations on your purchase! As you enjoy your Safety Precautions new product, please keep these safety tips in mind: WARNING: TO REDUCE THE RISK OF FIRE OR The Issue ELECTRIC SHOCK, DO NOT EXPOSE THIS • The home theater entertainment experience is a growing trend APPLIANCE TO RAIN OR MOISTURE. and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. WARNING • Flat panel displays that are inappropriately RISK OF ELECTRIC SHOCK situated on dressers, bookcases, DO NOT OPEN. shelves, desks, speakers, chests or carts may fall over and cause WARNING: TO REDUCE THE RISK OF ELECTRIC injury. SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TOSHIBA Cares! SERVICING TO QUALIFIED SERVICE PERSONNEL. • The consumer electronics industry is committed to making home The lightning flash with arrowhead entertainment enjoyable and safe. symbol, within an equilateral triangle, is intended to alert the user to the presence Tune Into Safety of uninsulated “dangerous voltage” within • One size does NOT fit all. Follow the manufacturer’s recommendations the product’s enclosure that may be of for the safe installation and use of your flat panel display. sufficient magnitude to constitute a risk of • Carefully read and understand all enclosed instructions for electric shock to persons. proper use of this product. The exclamation point within an • Don’t allow children to climb on or play with furniture and equilateral triangle is intended to alert the television sets. user to the presence of important • Don’t place flat panel displays on furniture operating and maintenance (servicing) that can easily be used as steps, such instructions in the literature as a chest of drawers. accompanying the appliance. • Remember that children can become excited while watching a program, especially on a “larger WARNING than life” flat panel display. Care To prevent injury, this apparatus must be securely should be taken to place or install attached to the floor/wall in accordance with the the display where it cannot be installation instructions. See item 26 on p. 4 and pushed, pulled over, or knocked down. instructions on p. 5. • Care should be taken to route all cords and If television is not positioned in a sufficiently stable cables connected to the flat panel display so that they cannot be location, it can be potentially hazardous due to falling. pulled or grabbed by curious children. Wall Mounting: If you decide to wall mount your flat panel display, always: WARNING : If you decide to wall mount this • Use a mount that has been recommended by the display television, always use a UL Listed wall bracket manufacturer and/or listed by an independent laboratory (such appropriate for the size and weight of this television. as UL, CSA, ETL). The use of any wall bracket other than a UL Listed wall • Follow all instructions supplied by the display and wall mount bracket appropriate for the size and weight of this manufacturers. television for wall mounting this television could result • If you have any doubts about your ability to safely install your in serious bodily injury and/or property damage. See flat panel display, contact your retailer about professional “Removing the Pedestal Stand” (- p. 6). installation. • Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted NOTE TO CATV INSTALLERS to walls with steel studs or old cinder block construction. If you This is a reminder to call the CATV system installer’s are unsure, contact a professional installer. attention to Article 820-40 of the U.S. NEC, which provides • A minimum of two people are guidelines for proper grounding and, in particular, specifies required for installation. Flat panel that the cable ground shall be connected to the grounding displays can be heavy. system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 34 and 35 on p. 4. 2

Important Safety Instructions • ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped. 1) Read these instructions. 15) CAUTION: 2) Keep these instructions. • To reduce the risk of electric shock, do not use the 3) Heed all warnings. polarized plug with an extension cord, receptacle, or 4) Follow all instructions. other outlet unless the blades can be inserted completely to prevent blade exposure. 5) Do not use this apparatus near water. • To prevent electric shock, match wide blade of plug to wide slot; fully insert. 6) Clean only with dry cloth. 16) CAUTION: 7) Do not block any ventilation openings. Install in Do not let children swallow the product or play with the accordance with the manufacturer’s instructions. plastic bag. Keep the product and the plastic bag out of 8) Do not install near any heat sources such as the reach of children. radiators, heat registers, stoves, or other apparatus 17) CAUTION: (including amplifiers) that produce heat. Do not let water or other liquids come into contact with 9) Do not defeat the safety purpose of Wide blade the product, as it may result in damage. the polarized or grounding type 18) WARNING: plug. A polarized plug has two blades • To prevent the spread of fire, keep candles or other with one wider than the other. open flames away from this product at all times. A grounding type plug has two blades and a third grounding prong. The wide blade or the third • Keep the product away from direct sunlight, fire or a prong are provided for your safety. If the provided plug heat source such as a heater. This may reduce the does not fit into your outlet, consult an electrician for product lifetime or result in fire. replacement of the obsolete outlet. 10) Protect the power cord from being Installation, Care, and Service walked on or pinched, particularly at plugs, convenience receptacles, and the point Installation where they exit from the apparatus. Follow these recommendations and precautions and heed all warnings when installing your TV: 11) Only use attachments/accessories specified by the manufacturer. 19) WARNING: NEVER expose batteries to excessive heat such as sunshine, fire, or 12) Use only with the cart, stand, tripod, the like. bracket, or table specified by the manufacturer, or sold with the 20) ALWAYS plug the product into an outlet that is located in apparatus. When a cart is used, use such a manner that it can be easily unplugged in case the caution when moving the cart/apparatus product requires service. combination to avoid injury from tip-over. 21) NEVER route the product’s power cord inside a wall or 13) Unplug this apparatus during lightning storms or similar enclosed area. when unused for long periods of time. 22) Never modify this equipment. Changes or modifications 14) Refer all servicing to qualified service personnel. may void: a) the warranty, and b) the user’s authority to Servicing is required when the apparatus has been operate this equipment under the rules of the Federal damaged in any way, such as power-supply cord or plug Communications Commission. is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to 23) DANGER: RISK OF SERIOUS rain or moisture, does not operate normally, or has been PERSONAL INJURY, dropped. DEATH, OR EQUIPMENT DAMAGE! Never place the TV on an unstable cart, Additional Safety Precautions stand, or table. The TV may fall, causing 14a) CAUTION: If the TV is dropped and the cabinet or serious personal injury, death, or serious damage to the enclosure surface has been damaged or the TV does TV. not operate normally, take the following precautions: 24) To avoid damage to this product, never place or store the • ALWAYS turn off the TV and unplug the power cord TV in direct sunlight; hot, humid areas; or areas subject to to avoid possible electric shock or fire. excessive dust or vibration. • NEVER allow your body to come in contact with any broken glass or liquid from the damaged television. 25) Never place the TV in an unstabilized location such as on The LCD panel inside the TV contains glass and a a shaky table, incline or location subject to vibration. toxic liquid. If the liquid comes in contact with your • Only use cabinets fit for such purpose or stands mouth or eyes, or your skin is cut by broken glass, recommended by the manufacturer of the TV. rinse the affected area thoroughly with water and • Only use furniture that can safely support the TV. consult your doctor. 3

• Ensure that the TV is not hanging over the edge of the The slots and openings are provided to protect the TV supporting furniture. from overheating and to help maintain reliable operation • Never place the TV on tall furniture (for example, of the TV. Leave a space of at least 4 (four) inches cupboards or bookcases) without anchoring both the around the TV. furniture and the TV to a suitable support 30) Always place the back of the television at least 4 (four) • Never stand the TV on cloth or other material placed inches away from any vertical surface (such as a wall) to between the TV and supporting furniture. allow proper ventilation. The TV may drop or fall off which may cause an injury or damage. 31) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is 26) Always place the TV on the floor or a sturdy, level, stable subject to wear or abuse. surface that can support the weight of the unit. In order to maintain stability and prevent the TV from falling over, 32) Never overload wall outlets and extension cords. secure the TV by either of the methods below: • Secure the TV with the supplied mounting screw. 33) Always operate this equipment from a 120 VAC, 60 Hz (recommended) power source only. Place the TV on a sturdy surface that has a sufficient 34) Always make sure the antenna system is properly thickness and screw the unit on the surface securely grounded to provide adequate protection against voltage by using the mounting screw and the fall-prevention surges and built-up static charges (see Section 810 of the screw hole. National Electric Code). Antenna lead-in wire Mounting screw (supplied) Antenna discharge unit (NEC Section 810-20) Ground clamp Screw hole TV back Grounding conductors (NEC Section 810-21) Electric service equipment • Secure the TV with the securement clip and a sturdy strap from the hooks on the rear of the TV pedestal Power service grounding to a wall stud, pillar, or other immovable structure. Ground clamps electrode system (NEC Art 250 Part-H) Make sure the strap is tight, secure, and parallel to the floor. 35) Sturdy strap (as short as possible) DANGER: RISK OF SERIOUS 4" min. PERSONAL INJURY OR DEATH! Hooks • Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can Securement accidentally touch overhead power lines. Never Securement Clip (supplied) TV side Clip (supplied) TV top locate the antenna near overhead power lines or other electrical circuits. 27) Never stand or climb on the TV. • Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, • Educate children about the dangers wires, or any home theater component connected to of climbing on furniture to reach the an antenna or phone system. TV or its controls. Be especially careful in households with children to prevent them from Care climbing on top of the TV. It may move, For better performance and safer operation of your TOSHIBA fall over, break, become damaged or cause an injury. TV, follow these recommendations and precautions: 28) The apparatus shall not be exposed to dripping or 36) If you use the TV in a room whose temperature is 32 °F splashing, and that no objects filled with liquids, such as (0 °C) or below, the picture brightness may vary until the vases, shall be placed on the apparatus. LCD warms up. This is not a sign of malfunction. 29) Never block or cover the slots or openings in the TV 37) Always unplug the TV before cabinet back, bottom, and sides. Never place the TV: cleaning. When cleaning your • on a bed, sofa, rug, or similar TV, please first remove any dirt or surface; dust from the surface. Gently wipe the cabinet and the display • too close to drapes, curtains, panel surface (the TV screen) or walls; or with a dry, soft cloth (cotton, flannel, etc.). Harsh rubbing • in a confined space such as a or use of a dirty or stiff cloth will scratch the TV surface. bookcase, built-in cabinet, or Avoid contact with alcohol, thinner, benzene, acidic or any other place with poor alkaline solvent cleaners, abrasive cleaners, or chemical ventilation. cloths, which may damage the TV surface. Never spray 4

volatile compounds such as insecticide on the TV surface. Such products may damage or discolor the TV. 47) If you have the TV serviced: • Ask the service technician to use only replacement 38) Never hit, press, or place anything on the back cover. parts specified by the manufacturer. These actions will damage internal parts. • Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition. Choosing a location for your LCD TV To Display your LCD TV on the included Pedestal Stand: 39) Observe the following safety precautions: WARNING: RISK OF ELECTRIC SHOCK! 1) Read and Follow the pedestal assembly instructions included with the pedestal. Never spill liquids or push objects of any kind into the TV cabinet slots. CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a 40) During a lightning storm, do not touch the connecting flat, cushioned surface such as a quilt or blanket. cables or TV set. Leave the bottom of the unit protruding over the edge of the surface and assemble the pedestal as indicated 41) For added protection of your TV from lightning and power below. surges, always unplug the power cord and disconnect Note: Extreme care should always be used when the antenna from the TV if you leave the TV unattended or attaching the pedestal stand to avoid damage to the unused for long periods of time. LCD panel. 42) ALWAYS unplug the TV to completely disconnect from 2) Place the TV on a sturdy, level surface that can support main power. When the TV is turned off using the on/off the weight of the TV. switch, it is not completely disconnected from power and 3) Be sure to secure the TV to a wall stud, pillar, surface, a minute amount of current is still consumed. or other immovable structure. To secure the TV in this manner: (1) attach the provided securement clip to an 43) During normal use, the TV may make occasional immovable structure, then (2) pass a sturdy strap snapping or popping sounds. This is normal, especially through the securement clip and attach each end to when the unit is being turned on or off. If these sounds the hooks located on the back of the TV. Be sure to become frequent or continuous, unplug the power cord leave at least 4 inches between the TV and the wall or and contact a Toshiba Authorized Service Provider. similar structure for ventilation. See item 26, p. 4 for additional details. 44) WARNING: RISK OF SERIOUS PERSONAL INJURY OR EQUIPMENT To Display your LCD TV using a Wall Bracket: DAMAGE! If you decide to wall mount your LCD TV, always use a UL Never strike the screen with a sharp Listed wall bracket appropriate for the size and weight of or heavy object. the LCD TV (- p. 2) : CAUTION: 45) • The LCD screen of this product can be damaged by 1. Two people are required for installation. ultraviolet radiation from the sun. When selecting a location for the television, avoid locations where the 2. Never use the screws attached to the TV. screen may be exposed to direct sunlight, such as in 3. To install a wall-mount from another manufacturer, use front of a window. the enclosed SPACERS. • Never touch, press, or place anything on the LCD 1) Unplug and remove any cables and/or other screen. These actions will damage the LCD screen. If component connectors from the rear of the TV. you need to clean the LCD screen, follow the 2) Carefully lay the front of the unit face down on a flat, instructions in item 37 on p. 4. cushioned surface such as a quilt or blanket. Service 3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the 46) appropriate bracket(s) are attached to the wall and the WARNING: back of the TV as described in the instructions RISK OF ELECTRIC SHOCK! provided with the wall bracket. Never attempt to service the TV yourself. Opening and 4) Make sure to place the spacers provided with the TV removing the covers may expose you to dangerous between the bracket and the back of the TV. voltage or other hazards. Failure to follow this 5) Always use the screws supplied or recommended by WARNING may result in death or serious injury. Refer all the wall mount manufacturer. servicing not specified in this manual to a Toshiba Authorized Service Provider. 5

You may lose your balance which could result in falls or other accidents. • Do not wear the 3D glasses for any purpose other than viewing 3D programming. 3D glasses do not function as sunglasses. • Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the glass section, which may 1. Remove the four screws. result in injury. (Do not use these for attaching Exposing the 3D glasses to liquid or excessive heat may a wall bracket.) damage the liquid crystal shutter function. 2. Place the four spacers (supplied). • If your nose or temple turns red, or you feel any pain or discomfort, stop using the 3D glasses. Screw Such symptoms may occur when wearing 3D glasses for Wall bracket long periods of time. Spacer (supplied) • Be careful not to pinch your fingers in the hinge of the 3D glasses. TV back panel Cautions on watching the 3D images Removing the Pedestal Stand • Some viewers may experience a seizure or blackout when exposed to certain flashing images or lights 1) Carefully lay the front of the unit face down on a flat, contained in certain 3D television pictures or video cushioned surface such as a quilt or blanket. Leave the games. stand protruding over the edge of the surface. Anyone who has had a seizure, loss of awareness, or Note: Extreme care should always be used when other symptom linked to an epileptic condition, or has a removing the pedestal stand to avoid damage to the family history of epilepsy, should contact a health care LCD panel. professional before using the 3D function. 2) Remove the seven screws. • Avoid using the 3D function when under the influence 3) Once you have removed all of alcohol. seven screws holding the • If you are ill or feel ill, you should refrain from viewing pedestal stand in place, remove 3D images, and consult your health care provider as the pedestal stand from the TV may be appropriate. Seven screws by sliding the pedestal stand away from the TV. • If you experience any of the following symptoms when viewing 3D video images, stop viewing and contact your health care provider: Safety Precautions for 3D glasses Convulsions, Eye or muscle twitching, Loss of Note: See p. 34 for compatible type of 3D glasses. awareness, Altered vision, Involuntary movements, Disorientation, Eye Strain, Nausea/Vomiting, Dizziness, Headaches. Warning • If you feel eye fatigue or other discomfort from About handling the 3D glasses viewing 3D video images, remove the 3D glasses and discontinue use until the condition improves. • Do not leave the 3D glasses or the accessories within the reach of small children. • Viewing in 3D may cause dizziness and/or disorientation for some viewers. Inhaling or swallowing them may cause suffocation or lesions in the stomach wall. Therefore, to avoid injury do not place your TV near open If swallowed, consult a doctor immediately. stairwells, balconies, or wires. Also do not sit near objects that could be broken if • Do not repair, modify, or disassemble the 3D glasses accidentally hit. by yourself. • When viewing 3D images, always wear 3D glasses. Doing so may cause a fire or cause you to become indisposed while viewing 3D images. Watching 3D images without specified 3D glasses may cause eye strain. • Do not expose the glasses to excessive heat such as sunshine, fire, or the like. • Do not wear 3D glasses or watch 3D images from steep angles or while lying down. Caution The 3D effect is lost in these conditions and eye strain may result. About the 3D glasses • It is recommended that the viewer’s eyes and 3D glasses are level with the screen. • Do not use the 3D glasses if they are cracked, broken, or not working properly. • If you have prescription eye glasses or contact lenses, wear the 3D glasses over them. Continuing to use them in such a state may cause injury, eye strain, or indisposition. Watching 3D images without appropriate eyewear may cause eye strain. • Do not stand or walk while wearing 3D glasses. 6

• If 3D images often appear doubled or if you cannot see the images in 3D, stop viewing. Continuous viewing may cause eye strain. USA - Federal Communications • Due to the possible impact on vision development, viewers of 3D video images should be age 6 or above. Commission Statement Children and teenagers may be more susceptible to FCC Compliance Statement health issues associated with viewing in 3D and should be closely supervised to avoid prolonged viewing without Toshiba television models 46UL610U, 55UL610U, and rest. 65UL610U comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • Watching TV while sitting too close to the screen for (1) This device may not cause harmful interference, and an extended period of time may cause eye strain. (2) This device must accept any interference received, The ideal viewing distance should be at least three times including interference that may cause undesired operation. the screen height. The party responsible for compliance to these rules is: Toshiba America Information Systems, Inc. screen height 9740 Irvine Blvd., Irvine, CA 92618. Ph: 1-800-631-3811 Interference: This equipment has been tested and found to comply with the limits for a Class B digital device, • Watch the TV within effective viewing angle. pursuant to Part 15 of the FCC Rules. These limits are Otherwise, you may not see the correct 3D image. designed to provide reasonable protection against harmful interference in a residential installation. Effective viewing angle: This equipment generates, uses, and can radiate radio - Within 30° horizontal, 20° vertical frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. FCC Caution • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. To assure continued compliance, follow the attached • Consult the dealer or an experienced radio/TV technician installation instructions. Any changes or modifications not for help. expressly approved by Toshiba America Information Systems, Inc. could void the user’s authority to operate Wireless Radio this device. Service Center or an experienced radio/TV For product available in the USA/Canada market, only technician for help. channel 1–11 can be operated. Selection of other channels is not possible. CANADIAN NOTICE The device could automatically discontinue transmission For Model FPT-AG02 in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit This Class B digital apparatus complies with Canadian transmission of control or signaling information or the use ICES-003. of repetitive codes where required by the technology. If this device is going to be operated in 5.15–5.25GHz California state law frequency range, then it is restricted to an indoor Perchlorate Material — special handling may apply, environment only. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Important: Any changes or modifications not expressly approved by the party responsible for compliance could void the user"s authority to operate this equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. 7

Canada - Industry Canada Statement ENERGY STAR® User Information This device complies with RSS-210. ENERGY STAR User Information Statement: the factory default settings of this television meet ENERGY STAR® Operation is subject to the following two conditions: requirements. Enabling or changing certain features and (1) This device may not cause harmful interference, and functionality (e.g. Picture Settings, Auto Brightness Sensor) (2) This device must accept any interference received, may increase energy consumption, possibly beyond the including interference that may cause undesired operation limits required for ENERGY STAR qualification. of the device. To ensure your television is operating at optimal energy This device and its antenna(s) must not be co-located or efficiency, select [Home] mode during initial activation. To operating in conjunction with any other antenna or return to [Home] mode settings, select [AutoView] picture transmitter. mode, and set the Auto Brightness Sensor to [On] mode. [AutoView] mode is recommended for normal home use. Wireless Radio For more information, see p. 57. For product available in the USA/Canada market, only ENERGY STAR® qualified TV. Products that channel 1–11 can be operated. Selection of other channels is earn the ENERGY STAR prevent green house not possible. gas emissions by meeting strict guidelines set The device could automatically discontinue transmission by the U.S. Environmental Protection Agency. in case of absence of information to transmit, or operational ENERGY STAR and the ENERGY STAR mark failure. Note that this is not intended to prohibit are registered U.S. marks. transmission of control or signaling information or the use of repetitive codes where required by the technology. Important: Any changes or modifications not expressly approved by the party responsible for compliance could Important notes about your LCD TV void the user"s authority to operate this equipment. The following symptoms are technical limitations of IMPORTANT NOTE: LCD Display technology and are not an indication of IC Radiation Exposure Statement: This equipment malfunction; therefore, Toshiba is not responsible for complies with IC RSS-102 radiation exposure limits set perceived issues resulting from these symptoms. forth for an uncontrolled environment. This equipment 1) An afterimage (ghost) may appear on the screen if a should be installed and operated with minimum distance fixed, non-moving image is displayed for a long period 20 cm between the radiator & your body. of time. The afterimage is not permanent and will disappear in a short period of time. 2) The LCD panel contained in this TV is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance. Note: Interactive video games that involve shooting a “gun” type of joystick at an on-screen target may not work with this TV. 8

TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL Trademark Information INFORMATION MAY BE OBTAINED FROM MPEG LA, • Manufactured under license from Dolby LLC. SEE HTTP://WWW.MPEGLA.COM Laboratories. • THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT Dolby and the double-D symbol are registered PORTFOLIO LICENSE FOR THE PERSONAL AND NON- trademarks of Dolby Laboratories. COMMERCIAL USE OF A CONSUMER TO (i) ENCODE • Audyssey Dynamic Volume® controls volume VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD levels to eliminate loud spikes and raise soft (“VC-1 VIDEO”) AND/OR (ii) DECODE VC-1 VIDEO THAT dialog for more enjoyable television and movie WAS ENCODED BY A CONSUMER ENGAGED IN A viewing. Audyssey EQ® provides clear, PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR accurate and natural sound right out of the WAS OBTAINED FROM A VIDEO PROVIDER LICENSED box. Together, these technologies ensure you TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR enjoy your audio experience as much as your SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL video. INFORMATION MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM • Manufactured under license from Audyssey Laboratories. U.S. and foreign patents pending. Audyssey EQ and • THIS PRODUCT IS LICENSED UNDER THE MPEG-4 Audyssey Dynamic Volume are registered trademarks of VISUAL PATENT PORTFOLIO LICENSE FOR THE Audyssey Laboratories. PERSONAL AND NON-COMMERCIAL USE OF A ® CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE • HDMI, the HDMI Logo, and High-Definition WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 Multimedia Interface are trademarks or registered VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT trademarks of HDMI Licensing LLC in the United States and WAS ENCODED BY A CONSUMER ENGAGED IN A other countries. PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR • Blu-ray Disc™, Blu-ray™, and the logos are trademarks of WAS OBTAINED FROM A VIDEO PROVIDER LICENSED the Blu-ray Disc Association BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE • INSTAPORT™ and INSTAPORT logo are trademarks of IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER Silicon Image, Inc. in the United States and other countries. USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL,INTERNAL AND • MPEG Layer-3 audio coding technology licensed from COMMERCIAL USES AND LICENSING MAY BE Fraunhofer IIS and Thomson. OBTAINED FROM MPEG LA,LLC. SEE HTTP:// • DLNA®, DLNA® Certification Logo, and DLNA CERTIFIED™ WWW.MPEGLA.COM are registered trademarks, trademarks, service marks, or certification marks of the Digital Living Network Alliance. • VUDU is a trademark of VUDU, Inc . • YouTube is a registered trademark of Google, Inc. • Netflix is a registered trademark of Netflix, Inc. • Yahoo! is a registered trademark of Yahoo! Inc. • CinemaNow is a registered trademark of Best Buy, Inc. • Pandora is a registered trademark of Pandora Media, Inc. • Blockbuster is a registered trademark of Blockbuster, Inc. • This product contains Adobe® Flash® Player software under license from Adobe Systems Incorporated. Copyright © 1995-2009 Adobe Systems Incorporated. All rights reserved. Adobe and Flash are trademarks of Adobe Systems Incorporated. • RealD and the RealD logo are trademarks of RealD Inc. • This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. • This product includes technology owned by Microsoft Corporation and can not be used or distributed without a license from Microsoft Licensing, GP. • THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON- COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED 9

Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 3 Using Channel Return . . . . . . . . . . . . . . . . . . . . . . . . . 43 Using SurfLock™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Installation, Care, and Service . . . . . . . . . . . . . . . . . . . . . 3 Selecting the video input to view . . . . . . . . . . . . . . . . . . 43 Choosing a location for your LCD TV . . . . . . . . . . . . . . . . . 5 Using closed captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Analog CC mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Safety Precautions for 3D glasses . . . . . . . . . . . . . . . . . . . 6 Digital CC settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Chapter 1: Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . .12 Setting the PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Entering a new PIN code . . . . . . . . . . . . . . . . . . . . . . . 45 Overview of installation, setup, and use . . . . . . . . . . . . 12 Changing or deleting your PIN code . . . . . . . . . . . . . 45 Front panel control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Forgotten PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Back panel connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Using parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Bundling the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Blocking TV programs and movies by rating Chapter 2: Connecting your TV . . . . . . . . . . . . . . . . . . . . .15 (V-Chip) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Overview of cable types . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Downloading an additional rating system . . . . . . . . 46 About the illustrations . . . . . . . . . . . . . . . . . . . . . . . . . 15 Displaying ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Connecting to a Satellite dish, an Antenna, or Cable Unlocking programs . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Locking specific channels . . . . . . . . . . . . . . . . . . . . . . . . . 47 Connecting an HDMI® or DVI device to the HDMI Locking video input . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Setting a time limit for games . . . . . . . . . . . . . . . . . . . 48 Connecting a VCR or DVD player with ColorStream® Locking the control panel . . . . . . . . . . . . . . . . . . . . . . . 48 (component video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Using HDMI® CEC Control . . . . . . . . . . . . . . . . . . . . . . . 48 Connecting remote IR devices . . . . . . . . . . . . . . . . . . . . . 19 Controlling HDMI® CEC playback devices. . . . . . . . 49 Connecting a digital audio system . . . . . . . . . . . . . . . . . 20 HDMI® CEC Control input source selection . . . . . . . 49 Using the TV remote and HDMI® CEC Control to Adjusting the amplifier’s audio. . . . . . . . . . . . . . . . . . 50 control other devices. . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Other HDMI® CEC Control functions . . . . . . . . . . . . 50 Connecting an HDMI audio system . . . . . . . . . . . . . . . . 21 Using the HDMI® settings feature. . . . . . . . . . . . . . . . . . 50 Connecting a PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Viewing the HDMI® signal information. . . . . . . . . . . . . 50 Connecting to a home network . . . . . . . . . . . . . . . . . . . . 23 Using your PC with the TV . . . . . . . . . . . . . . . . . . . . . . . 51 Adjusting the image . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Chapter 3: Using the remote control. . . . . . . . . . . . . . . . . .24 Setting the PC audio . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Controlling other devices . . . . . . . . . . . . . . . . . . . . . . . . . 24 Setting the timer to turn on the TV . . . . . . . . . . . . . . . . . 51 Installing batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Learning about the Remote Control . . . . . . . . . . . . . . . . 25 Adjusting the POWER LED’s brightness . . . . . . . . . . . . 52 Chapter 4: Initial Setup and Menu . . . . . . . . . . . . . . . . . . .26 Setting Automatic Power Down . . . . . . . . . . . . . . . . . . . 52 Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Setting No Signal Power Down . . . . . . . . . . . . . . . . . . . . 52 Navigating the menu system . . . . . . . . . . . . . . . . . . . . . . 27 Displaying TV status information . . . . . . . . . . . . . . . . . . 53 Main menu layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Viewing support information. . . . . . . . . . . . . . . . . . . . . . 53 Quick menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Resetting to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . 53 Power failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Chapter 5: Setting up your TV . . . . . . . . . . . . . . . . . . . . . .30 Changing Initial settings. . . . . . . . . . . . . . . . . . . . . . . . . . 30 Chapter 7: Picture and sound controls . . . . . . . . . . . . . . . .54 Menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Selecting the picture size. . . . . . . . . . . . . . . . . . . . . . . . . . 54 Local Time Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Scrolling the picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Using the Auto Aspect feature . . . . . . . . . . . . . . . . . . . . . 56 ANT/CABLE IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Using the 4:3 Stretch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Storing channels in memory (optional) . . . . . . . . . . . . . 30 Freezing the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Auto Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Manual Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Selecting the picture mode . . . . . . . . . . . . . . . . . . . . . . 57 Skipping channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Adjusting the picture quality . . . . . . . . . . . . . . . . . . . . 57 Skipping video inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Using the advanced picture settings features . . . . . . . . 58 Labeling channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Edge Enhancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Labeling video inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Dynamic Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Configuring shared inputs . . . . . . . . . . . . . . . . . . . . . . . . 32 DynaLight™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Setting the Auto Input feature . . . . . . . . . . . . . . . . . . . . . 33 Static Gamma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Film Stabilization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Chapter 6: Basic features . . . . . . . . . . . . . . . . . . . . . . . . .34 ClearScan 480™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Viewing 3D images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 MPEG NR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Using the 3D glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 DNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Using 3D functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Auto Brightness Sensor. . . . . . . . . . . . . . . . . . . . . . . . . 59 Tuning channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Backlight Adjustment Pro . . . . . . . . . . . . . . . . . . . . . . 59 Setting the Channel Tuning Mode . . . . . . . . . . . . . . . 41 ColorMaster™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Tuning in to the next programmed channel . . . . . . . 41 Base Color Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . 60 Tuning in to a specific channel Color temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 (programmed or unprogrammed). . . . . . . . . . . 41 Resetting to the factory default . . . . . . . . . . . . . . . . . . 60 Using the Channel Browser™ . . . . . . . . . . . . . . . . . . . 41 Setting the Expert Picture Settings . . . . . . . . . . . . . . . . . 60 10

Test Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 RGB Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Resetting to the factory default . . . . . . . . . . . . . . . . . . 61 Locking the picture settings . . . . . . . . . . . . . . . . . . . . . . . 61 Adjusting the audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Muting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Selecting stereo/SAP broadcasts . . . . . . . . . . . . . . . . 61 Adjusting the audio balance . . . . . . . . . . . . . . . . . . . . 62 Adjusting the range . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Selecting the optical audio output format . . . . . . . . . 62 Using the Dolby® Digital Dynamic Range Control feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Using Audyssey Dynamic Volume® . . . . . . . . . . . . . 62 Using advanced sound features . . . . . . . . . . . . . . . . . . . 63 Using surround sound . . . . . . . . . . . . . . . . . . . . . . . . . 63 Chapter 8: Advanced features . . . . . . . . . . . . . . . . . . . . . .64 Using your home network . . . . . . . . . . . . . . . . . . . . . . . . 64 Setting up the Network. . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Wireless Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Advanced Network Setup . . . . . . . . . . . . . . . . . . . . . . 67 Network Connection Test . . . . . . . . . . . . . . . . . . . . . . 68 Using the software keyboard . . . . . . . . . . . . . . . . . . . . . . 68 Performing a Software Upgrade . . . . . . . . . . . . . . . . . . . 69 Viewing the Software Licenses . . . . . . . . . . . . . . . . . . . . 69 Using the NET TV™ feature . . . . . . . . . . . . . . . . . . . . . . . 69 NET TV menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Netflix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 VUDU™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 YouTube™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 CinemaNow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Blockbuster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Pandora. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Yahoo!® TV Widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Using the Media Player. . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Media Player Specifications. . . . . . . . . . . . . . . . . . . . . 73 Basic operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Viewing Movie files . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Playing Music files . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Viewing Photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Using the Wallpaper feature . . . . . . . . . . . . . . . . . . . . . . 78 Chapter 9: Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . .79 General troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 79 LED indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Chapter 10: Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Acceptable signal formats for PC IN, HDMI, and 3D . 85 PC IN signal formats. . . . . . . . . . . . . . . . . . . . . . . . . . . 85 HDMI signal formats . . . . . . . . . . . . . . . . . . . . . . . . . . 86 3D signal formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Remote control functional key chart. . . . . . . . . . . . . . . . 88 Operating other devices . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Programming the remote to operate other devices . . . 90 Device code setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Searching for a device code . . . . . . . . . . . . . . . . . . . . . 91 Locking the volume keys . . . . . . . . . . . . . . . . . . . . . . . 91 Clearing the remote’s programming . . . . . . . . . . . . . 91 Resetting to the factory default . . . . . . . . . . . . . . . . . . 91 Operating the TV with combination buttons. . . . . . . . . 92 Remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Limited United States Warranty for LCD Televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Limited Canadian Warranty for Toshiba Brand Flat Panel Televisions . . . . . . . . 100 Limited Canadian Warranty for Toshiba Brand 3D Glasses . . . . . . . . . . . . . . . . . . 102 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 11

Chapter 1: Introduction Features Overview of installation, setup, •Integrated digital tuning (8VSB ATSC and QAM) and use eliminates the need for a separate digital converter set-top box (in most cases). Follow these steps to set up your TV and begin using its •1080p output resolution. many exciting features. •Four HDMI® digital, High-Definition Multimedia 1 To choose a location for the TV: Interfaces with 1080p input support (- p. 17). • Read “Important notes about your LCD TV” •HDMI capabilities (- p. 8). ARC (Audio Return Channel) enables the audio • Place the TV in an appropriate location (- p. 2–6). signal of the TV to be sent to an AV amplifier via an HDMI cable. 2 Do not plug in any power cords until AFTER you HDMI INSTAPORT™ technology reduces lag time have connected all cables and devices to your TV. when switching HDMI sources. 3 BEFORE connecting cables or devices to the TV, RGB Range adjusts RGB full range signal learn the functions of the TV’s connections and automatically. controls (- p. 13). •HDMI® CEC Control allows control of external 4 Connect your other electronic device(s) to the TV devices from the TV remote via HDMI connection (- (- p. 15–23). p. 48). •ColorStream® HD high-resolution component video 5 See “Chapter 3: Using the remote control” (- p. 24) input. for an overview of the buttons on the remote control, installing the batteries, and preparing to •Digital Audio Out optical audio connection with operate your other device(s). Dolby® Digital optical output format (- p. 62). •PC IN (Analog RGB) computer terminal (- p. 22). 6 AFTER connecting all cables and devices, plug in •IR IN/OUT IR OUT is for controlling infrared remote- the power cords for your TV and other devices. controlled devices through the TV. IR IN is for When you turn on the TV, the Initial Setup menu connecting to IR OUT on other devices (- p. 19). appears. •Built-in WLAN Allows the television to access your 7 See “Chapter 4: Initial Setup and Menu” for a quick home wireless network without an external Dual overview of navigating the TV’s menu system Band WLAN Adapter. (- p. 26). •Yahoo!® TV Widgets are Internet applications 8 Program channels into the TV’s channel memory designed to run on your TV (- p. 71). (- p. 30). •ColorMaster™ lets you adjust the TV’s standard colors 9 See Chapters 6, 7 and 8, for details on using the TV’s (- p. 60). features. •ClearScan 480™ provides picture clarity for fast 10 For help, refer to “Chapter 9: Troubleshooting” (- motion video using new Backlight Scanning p. 79). technology (-p. 59). •AutoView® lets you automatically adjust picture 11 See “Chapter 10: Appendix”, for technical settings based on ambient light conditions and input specifications and warranty information (- p. 83). signal content (- p. 57). •Dynamic Volume (Audyssey Dynamic Volume®) eliminates inconsistent TV volume when changing channels or viewing commercials (- p. 62). •Media Player lets you view photo files and play music or movie files (- p. 73). •3D capability Take movie and photo watching to a whole new dimension, and let yourself be blown away with the depth and detail of 3D before your very own eyes. • ENERGY STAR® qualified 12

Chapter 1: Introduction Front panel control Examples show Model 46UL610U. TV front Touch key function: Remote Sensor – First touch: these only light up. – Second touch: these are available. • POWER – To turn the TV on and off. • B b – To change the channel. When a menu is onscreen, these keys function as up/down menu navigation Effective range: 16.4 ft (5 m) buttons. • + - – To adjust the volume level. When 3D IR a menu is onscreen, these keys Angle (- p. 7), LED (- p. 82) function as left/right menu navigation buttons. • MENU – To access the menu. When a menu is onscreen, the MENU key on the TV’s control panel functions as the RETURN button. Touch sensor • INPUT – To change the source you are Service LED (- p. 82) viewing. When a menu is onscreen, See “LED indications” (- p. 82). Brightness Sensor the INPUT key on the TV"s control This sensor will detect the ambient light conditions to panel functions as the OK button. optimize the backlighting levels (- p. 59). Back panel connections For explanations of cable types and connections, see p. 15–23. USB terminal TV back COLORSTREAM HD1 IN** To configure for use (for audio), see “Side Shared Audio” (- p. 32). VIDEO 1 IN** VIDEO 2 IN** To configure for use, see “Side Shared Audio” (- p. 32). FIXED AUDIO * To use PC/ HDMI® IN COLORSTREAM HD2 IN, Power cord an appropriate adapter (not supplied) is necessary. PC/COLORSTREAM HD2/ ** To use COLORSTREAM HDMI 4 IN (Audio input) HD1 IN, VIDEO 1 IN, or To configure for use, see VIDEO 2 IN, an “Rear Shared Audio” appropriate adapter (- p. 32). (supplied) is necessary. ANT/CABLE PC/COLORSTREAM HD2 IN* (Video input) To configure for use, see “Shared PC Input” (- p. 32). LAN port IR IN/OUT To configure for use, see p. 19–20. DIGITAL AUDIO OUT See “Connecting a digital audio system” (- p. 20). 13

Chapter 2: Connecting your TV Dual-wand IR blaster cable Overview of cable types Before purchasing cables, know the connector types your devices require. Use with video devices with infrared remote control. You can purchase cables from most stores that sell You can use this cable with the TV’s IR pass-through audio/video devices. feature (- p. 19). Coaxial cable (F-type) Optical audio cable (F-type) Connects your antenna, cable TV service, or Connects receivers with Dolby Digital or PCM (pulse- cable converter box to your TV. code modulation) optical audio input to the TV’s DIGITAL AUDIO OUT terminal (- p. 20). Standard A/V cables (composite video) Red Analog RGB (15-pin) computer cable R AUDIO White L VIDEO Yellow Use with video devices with analog audio and Connects a PC to the TV’s PC IN terminal (- p. 22). composite video output. These cables (and the related Note: Separate audio cables are required. inputs on your TV) are often color-coded. Standard/Crossover LAN cable Component video cables Red PR Blue PB Standard LAN cable is used to connect the TV to your Green home network (- p. 23). Y Use with video devices with component video output. Crossover LAN cable is used to connect the TV directly Separate audio cables are required. (ColorStream® is a to a PC (- p. 23). Toshiba brand.) Note: Component video cables provide better picture quality than composite video cables. About the illustrations Note: The connection illustrations shown are HDMI® cable ( ) representative of typical device connections only. The input/output terminals on your devices may differ. See each device’s owner’s manual. Use it with devices built-in HDMI output. An HDMI cable delivers digital audio and video in its native format. Separate audio cables are not required (- p. 17, 21–22). Note: HDMI cables provide the best audio and picture quality. 15

Chapter 2: Connecting your TV Connecting to a Satellite dish, an Antenna, or Cable TV Satellite receiver with component video AUDIO Y PR OUT PB L TV back panel Satellite COMPONENT VIDEO VIDEO R IN OUT Satellite dish Standard audio cable Component AV adapter cable video cable (supplied) Component adapter cable (supplied) VHF/UHF Antenna Cable box Coaxial cable CH 3 CH 4 IN OUT Cable TV You will need: To view satellite programs using the component video •Coaxial cables connections: •AV adapter cable (supplied) Turn on the satellite receiver. Press and B or b to •Standard audio cable select ColorStream HD1. Use the satellite receiver"s •Component adapter cable (supplied) controls to change channels. •Component video cable To view the antenna or cable signal: Press and B or b to select ANT/CABLE. To view basic and premium cable channels: Turn on the cable box. Press and B or b to select ANT/CABLE. Tune the TV to channel 3 or 4 (the channel the cable box output is set to). Use the cable box’s controls to change channels. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. 16

Chapter 2: Connecting your TV Connecting an HDMI® or DVI device to the HDMI input HDMI device TV back panel HDMI OUT HDMI cable DVI device Analog audio cable DVI/HDCP OUT OUT L R AUDIO HDMI-to-DVI adapter cable The HDMI input on your TV receives digital audio and To view the HDMI device video: uncompressed digital video from an HDMI device, or Press and B or b to select HDMI 1, HDMI 2, HDMI uncompressed digital video from a DVI (Digital Visual 3, or HDMI 4. Interface) device. Note: For programming the TV remote control to operate This input is designed to accept HDCP (High- other devices, see p. 90. Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D To connect a DVI device, you will need: compliant[1] consumer electronic devices (such as a set- •HDMI-to-DVI adapter cable top box or DVD player with HDMI or DVI output). – For proper operation, the length of the HDMI-to-DVI Supported signal formats: VGA, SVGA, XGA, WXGA, adapter cable must not exceed 9.8 ft (3 m). SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i Recomended length: 6.6 ft (2 m). (60Hz), and 1080p (24Hz/60Hz). For signal •3.5 mm Stereo to RCA Y-Cable specifications, see p. 86. – An HDMI-to-DVI adapter cable transfers video only. Supported Audio format: Linear PCM, sampling rate Separate analog audio cables are required. 32/44.1/48 kHz. Note: To ensure that the HDMI or DVI device is reset Note: properly: • For connecting a PC to the HDMI input, see p. 22. • When turning on electronic components, turn on the TV • Some legacy HDMI sources may not work properly with first and then the HDMI or DVI device. your HDMI TV due to the adoption of new standards. Try • When turning off electronic components, turn off the disabling the options in HDMI Settings (- p. 50). HDMI or DVI device first and then the TV. To connect an HDMI device, you will need: [1] EIA/CEA-861-D compliance covers the transmission of •One HDMI cable per HDMI device uncompressed digital video with high-bandwidth digital – Recommendation: For proper operation, use an content protection, which is being standardized for HDMI cable with the HDMI Logo ( ). reception of high-definition video signals. Because this is – To display an 1080p/60 Hz signal format, you need a an evolving technology, it is possible that some devices High Speed HDMI cable. A conventional HDMI/DVI may not operate properly with the TV. cable may not work properly. – HDMI cables transfer video and audio. Separate analog audio cables are not required. 17

Chapter 2: Connecting your TV Connecting a VCR or DVD player with ColorStream® (component video) Y W R G B TV back panel Yellow White Red Green Blue VCR DVD player VIDEO L AUDIO R Y COMPONENT VIDEO PB PR AUDIO OUT L R Light green