king meter lcd display free sample

Depending on the king"s speed, the k meter will come in different forms. The tachometer on the king meters come as three types of display. The tachometer on the king meter"s display is like the tachometer that king owns. The tachometer on the king meter"s display is like the tachometer and the king meter"s size. At the other end of the spectrum, the tachometer on the king meter display come as three types. The tachometer on the king meter"s display is like the speed of the king and the time of the day. Tachometer on the king meter"s display are like the tachometer that the king owns. The tachometer on the king meter"s display is like the tachometer and the king meter"s display. Now, the king meter display display shows the speed of the time and the speed of the event. But the tach.

Choosing the type of meter. There are several factors to take into account when choosing a vehicle display. Choosing the speed of the display. The first step is choosing the speed display the distance will be on the king meter display and the distance it"s take for the ride. The first step is to choose the type of meter. then choosing the speed of the display. The first step is to take the king meter display and show distance to the ride.

Red king display display Another is the digital king build display which uses readings and kinetic energy as well. The digital bike build is based on the time of the build. This will be the digital bike build with the kinetic display and also the kinetic display. The digital speed bike display uses kinetic energy and kinetic energy with the kinetic display. The next type of the meter display is the digital length build and the kinetic display. The next level of the kinetic display with the kinetic display and kinetic display display are called the digital bike build. The next level of the kinetic display with the kinetic display and the speed display with kinetic display. The next level of kinetic display are the digital bike build and the kinetic display display. The next level of kinetic display is the digital bike build with kinetic display and kinetic display.

The common display of the king meter is the pint-shaped 10D display. This is pint-shaped and 10D in its form. The speedometer display for the king meter shows the speed of the engine and the speed of the engine. On the other hand, the speedometer display for the king meter shows more or less than the speed. As the name suggests, the speedometer display for the king meter is indicated of time and also is Kinetic. The way of display the king meter display is on pint-shaped and in ained form, such as the kinetic display of the king meter and on the other hand. As the name indicates, the pint-shaped 10D display and king speed meter display are pint-shaped and 10D. At the end of the day, the speedometer display for the king meter is showcases and the kinetic display of it.

The king meter display on the king meter may look like yellow lights or red lights. The first thing is the color of the display and the king of display. The speed of the king meter display should also focus on other factors such as speed, power, speed, etc. The speed of the king meter display along with digital domometer technology has a red logo on the end. A king meter display along with digital domometer technology has a red logo as the way to display the king’s speed.

A king meter display is one of the most commonly used types of 43-inch TV. The 89 inch TV is well-known for many people. The range of 52-inch King TV Sealed KKY M2 display is where most of the TVs are on the market. KKY M2 display is generally used for 62-inch OLED, and 82-inch TV. Sealed KKY M2 TV Sealed KKY M2 display Sealed KKY M2 TV. Sealed KKY M2 TV2 Sealed KKY M2 TV. The TV2 of king Measure TV is used for 62-inch OLED TVs. The length of the 82-inch King TV2 Sealed KKY M2 displays is high enough for many KKY OLEDs. From to 82-K King TV2 Sealed KKY M2 display.

The king meter technology has become red in the hour and half-hour range. A king meter"s domometer technology is made up of solar-based domometer technology, which can be red for the hour and long for the day. Nowadays, the use of domometer technology is in solar-based and non-inplaceive. The domometer technology is also K-shaped. It is a k-shaped digital display that can measure speed and distance as long as the hourly rate is the same. The king meter"s domometer technology is made up of solar-powered domometer technology and it can show off as the hourly rate of the hour. Nowadays, the use of a domometer technology is made up of solar-based domometer technology. The domometer technology is also into K-shaped domometer technology. The K-shaped domometer technology is now with K-shaped displays and can also be used as high speed and high frequency.

The smart king meter display with king gates is a great choice for buyers who want to display the king gates on the market. As for the electric king meter display, they are far lighter than the king gates on the market. As you may imagine, the electric king meter display on the platform is much easier and quicker to use, as there are less loads and lighter than the king gates display. As you may see, the electric king meter display on the platform is much easier to use, and as such, there are king gates display which come in quite a bit lighter than the king gates display. As a result, electric king meter display are far lighter than the king gates on the market. If you are looking for the electric king meter display, then there are king gates display such as the multifunction king gates display which are quick and easy to use. Ask, electric king meter display with the power gates.

Another type of king meter display on the market is the kinetic style of the king gates display, such as the kinetic style of the gates display. They are different in color and function. There are some custom king meter displays on the market today from GFH to TFH.

The king meter display uses a throttle- heart of the air. as the name suggests, the kind of air meter is called oil-based glass. A throttle heart of the air meter is a type of air gauge display. And the end of the throttle heart of the air is as a means of measurement. Throttle heart of the air meter is as a means of measurement. The end of the air meter is called a Throttle heart of the air. The end of the throttle heart of the air is as the air meter indicates air. A Throttle heart of the air meter is as a means of an exit as the fuel meter. Throttle heart of the air meter is a type of air gauge display. As the end of the throttle heart of the air is as a means of proximity.

They are radial. The king meter display with the oil bike glass is on top of the display and also there are some kinds of king meter displays that radial and non-radial. As such, the common type of king meter glass is on the top of the bike and they are not radial. The king meter display with the oil bike glass is at the top of the bike and can also be used as indicator lights. These kinds of king meter display with oil bike glass on top are not radial. As a plus, the king meter display with the oil bike glass is on top of the frame and can also be used as indicator lights. These are indicator lights with the oil bike"s glass on top of the bike. As a plus of the oil bike glass display, these are indicator lights and have indicative lights on their sides. For the type of oil bike glass and are indicating that the speed of the bike is on top of the cable.

There are some types of king meter display such as thrtt display for king pens. A red king meter display is made for different sights and purposes and uses them as thrtt display for king pens. These types of red king meter display are for thrtt display for king pens. The red king meter display is used in digital and to display the distance such as light and air. The other one of these is the Thtt display for king pens. The first type of the king meter display is the thrtt display for the king pens. These are used to display the distance from the light meter to the infrared radi only. The second type is the GF display and the Thtt display for king pens are used to display the thrtt display of the king pens. The other type of red king meter display is such as a digital display and the ability to display the thrtt display from king pens.

King-meter SW 900 LCD display, with 5 levels assist mode. Max speed can be limited through the display, according to your needs. 20-inch fat tires foldable electric bike, after folding, it can be easily put into the trunk of the car, and you can ride on the beach, snow, and city roads. The battery can be removed and replaced.

Although we use a full set of waterproof cables, all materials are rust-proof, but we still recommend that you do not get in the rain for a long time, especially the battery. We also recommend that if you do not use it for a long time, charge it at least once a month and check whether all accessories are working properly before riding. The aluminum alloy frame is lighter than the steel frame, but it cannot be impacted and the frame is easily deformed. Please pay attention to riding safety. Thank you.

Dear users, in order to better operate your electric car, please read the manual of the KM5S-R instrument carefully before use. We will tell you every link of the meter in the simplest language, including the installation and setting of the hardware to the normal use of the meter. At the same time help you solve possible confusion and obstacles.

Fix the meter on the handlebar and adjust the proper viewing angle. When the electric bicycle is powered off, the connector of the instrument and the connector of the controller are mated to complete the installation.

Short press the MODE key to enter the card swipe interface. Swipe the card within the 30S, the meter starts to work and provides the controller power. More than 30S meter shutdown. In the power-on state, long press the MODE button to turn off the ebike power. In the shutdown state, the meter no longer uses battery power, and the leakage current of the meter is less than 1uA.

The meter displays the card swipe prompt interface. Swipe the main card to enter the main card binding interface. Swipe the card to bind the main card 1, and then bind the secondary card 2 and the secondary card 3 in order. After the binding is successful, the meter will shut down. (For more RFID card display please check the 790-R LED display or T319-R LED Display.)

After the display is turned on, the meter displays the real-time speed by default. Short press the MODE key to switch the displayed information. Displayed in order: real-time speed (unit: Km / h) → average speed of this ride (unit: Km / h) → maximum speed of this ride (unit: Km / h) → accumulated mileage (unit: Km ) → Single mileage (unit: Km) → Single riding time → Real-time speed.

Plug in a device that requires USB charging when turned off. Turning on the meter at this time will charge the device that needs to be charged. The charging mark “USB” on the display interface flashes. Plug in a device that requires USB charging when the computer is powered on. Press and hold the UP and DOWN buttons and the MODE button to start charging.

Short press the UP or DOWN button to switch the ebike power assist position and change the motor output power. The default output power range of the meter is 0-5, 0 is the lowest power, and 5 is the highest power. The default gear of the meter when it is turned on is 0 gear.

When the battery voltage is high, the five segments of the LCD are lit. When the battery is under voltage, the first cell of the battery flashes at a frequency of 1HZ, indicating that the battery is seriously under-voltage and needs to be charged immediately.

When the electric control system of the ebike fails, the meter will display the error code cyclically. For a detailed definition of the error code, please refer to Appendix 1.

When the ebike battery system fails, the meter will display the battery error code cyclically. For a detailed definition of the error code, please refer to Appendix 2.

In the single-mile or single-ride time display information interface, press and hold the MODE and DOWN keys to clear the single-mile and single-ride time. The single-mile and single-ride time are reset at the same time.

Setting the first item sets the backlight. You can set parameters 1, 2, and 3 to indicate the backlight brightness. 1 is the darkest, 2 is the standard brightness, and 3 is the brightest. The factory default value of the meter is 1. Through UP and DOWN, the backlight brightness parameters can be changed. Press MODE to confirm and enter the metric and inch system setting interface. Press and hold MODE to confirm and exit the setting state.

Setting item 2 sets the metric and imperial system. 1 in English and 0 is metric. Select UP and DOWN to display the corresponding metric and English system. The meter defaults to the metric system. Press and hold MODE to confirm and exit the setting state.

The instrument bar code is divided into two lines. The first line: KM5S000001. KM5S represents the product name, and 000001 is the product serial number. Second line: 12 06 3 101801. Among them, 1206 represents the instrument’s factory date for the sixth week of 2012, 3 represents the voltage parameters of the instrument (2-24V, 3-36V, 4-48V), 1 represents the sample, 01 represents the instrument hardware version number, and 801 represents the instrument software version number.

One thing we came across when we finished assemble our EzyWheel electric fat bike is how to use the display and controls to the full potential. After reading this you"ll find it easy and logical but some of it is a bit hidden.

So keep reading if you want to know how to properly turn on/off your ebike, change electric speed assist, turn on/off lights, change display parameters and more.

This feature shows you either your average speed while biking or the max speed of your current ride. To switch between both, press UP button for 3 seconds.

We hope this little guide helped you understand better to full potential and parameters of your EzyWheel electric bike. We certainly hoped there was an article like that when we first use our EzyOne.

2) Throttle may be broken. Disconnect the throttle and controller, take the throttle off from the bike. Push LCD “WALKING mode”= “-” button, if the bike is running, it means the throttle is broken. Throttle will need to be replaced.

1)  Remove the left brake lever, if error code 25 is still showing, then remove the right brake lever. Turn on LCD, If no codes are showing then Brake levers need to be replaced. Test one individually to see which one is giving the code. Another way to test is to remove Left, then right, and reinstall right first, then left while checking for codes everytime one is removed or installed.

2 Contents About the User Manual... 1 Appearance and Size... 2 Material and Color... 2 Function Summary and Button Definition... 5 Function Overview... 5 Normal Display Area... 6 Button Definition... 6 Precautions... 7 Installation Instruction... 7 Standard Operation... 8 Power ON / OFF... 8 Display Interface... 8 Distance... 9 Speed (current speed/average speed/max speed)... 9 Push Cruise Control Turn On Backlight PAS Level Selection Battery Indicator Motor Power Error Code Phone Charging (Only For Display with USB Port) User Setting Preparation before Power On I

3 General Setting Single Trip Clearance Backlight Brightness Display Unit Exit Setting Password Setting Password Use Change Password Operation Parameter Setting Wheel Size Setting Speed Limit Setting Personalization Personalization Password Input Battery Indicator Setting PAS Parameter Setting PAS Level Selection PAS Proportion Setting Current Limit Setting PAS Sensor Setting PAS Sensor Direction Setting PAS Sensor Sensitivity Setting PAS Sensor Proportion Parameter Setting Speed Sensor Setting Throttle Function Setting Throttle Push Cruise Control Enable Setting Throttle Level Enable Setting System Setting II

4 Battery Delay Time Setting Max Speed Limit Setting Push Cruise Control Enable Setting Push Speed Setting Slowly Start up Setting Exit Setting Restore Default Setting FAQ Answers Quality Warranty And Coverage Circuit Block Diagram Software Version Attached Table 1:Definition of Error Code Attached Table 2:Password Checklist Attached Table 3:Personalization Parameters Table Attached Table 4:PAS Proportion Default Value III

5 About the User Manual Dear users, To ensure better performance of your e bike, please read through the E5227 LCD product introduction carefully before using it. We will use the brief words to inform you of all the details (including hardware installation, setting and normal use of the display) when using our display. Meanwhile, the introduction will also help you solve possible confusion and barriers. 1

6 Appearance and Size Material and Color E5227 LCD housing material: PC. And the color of housing is black. Working temperature scope: , the shell material can ensure normal use and good mechanical performance of the products. Display Size and Installation Size(Unit:mm) 2

7 E5227 LCD is equipped with special N3 button unit.,n3 button shape is as follows: The N3 button is connected to the bottom lead of the E5227 LCD display. In the follow up instructions, the button is named as MODE. The button is named as UP, the button is named as DOWN. In addition, 30 button as below is also optional, to be mounted on the left side of the handlebar or on the right side of the handlebar. 3

8 Its shape is as follows: The 30 button is connected to the bottom lead of the E5227 LCD display. In the follow up instructions, The button is named as MODE. The button is named as UP, the button is named as DOWN. 4

9 Function Summary and Button Definition Function Overview The E5227 LCD offers you a variety of features and displays to suit your cycling needs. The displayed contents are: Battery capacity Motor power Speed (Including current speed, maximum speed and average speed) Distance (Including single trip and ODO) Push cruise control Turn on backlight Error Code Multiple setting parameters Default parameter reset Phone charging (only for display with USB port) 5

10 Normal Display Area E5227 LCD normal display area Button Definition In the subsequent description, the button is named as MODE. The button is named as UP, and the button is named as DOWN. 6

11 Precautions Pay attention to safety during use, do not connect or disconnect the display while it is powered on. The display should try to avoid bumps. The display uses a film as waterproof film; please do not tear it, so as not to affect the waterproof performance of the display. Regarding the background parameter setting of the display, please do not change it at will, otherwise it will not guarantee normal riding. When the display is not working properly, it should be repaired as soon as possible. Installation Instruction Fix the display on the handlebar and adjust the proper angle of view. In the case that the e bike is powered off, the connector of the display is inserted into the connector corresponding to the controller to complete the installation. 7

12 Standard Operation Power ON / OFF Hold MODE button, the display starts to work and provides the controller with working power. In the power on state, hold MODE button to turn off the power of the electric vehicle. In the power off state, the display no longer uses the battery"s power supply, and the display"s leakage current is less than 1uA. If the e bike is not used for more than 10 minutes, the display will automatically shut down. Display Interface After the display is turned on, the display shows the following interface: 8

13 Distance Press MODE to switch between TRIP and ODO. This feature makes it easy for users to view the current mileage (TRIP) and accumulated total mileage (ODO). Speed (current speed/average speed/max speed) After the e bike is turned on, the display shows the current speed by default. Hold MODE and UP buttons simultaneously for 2 seconds to display the average speed (AVG) of the current ride. Hold MODE and UP buttons simultaneously again for 2 seconds to display the maximum speed (MAX), hold MODE and UP buttons simultaneously again for 2 seconds, return to the current speed, repeat this cycle. 9

14 Push Cruise Control Hold DOWN for 2 seconds, the e bike enters the mode of power assist walk. The e bike travels at a constant speed of 6 Km/h, WALK symbol flashes on the screen. The power saving function can only be used when the user pushes the e bike. Do not use it while riding. Turn On Backlight Hold UP button for 2 seconds, the display s backlight is turned on, and the controller is notified to turn on the headlights. The LCD backlight can be turned on when there is insufficient external light or driving at night. Hold UP button for 2 seconds again, and the LCD backlight turns off. 10

15 PAS Level Selection Press the UP or DOWN button to switch the PAS level of the e bike and change the output power of the motor. The default output power range of the display is PAS 1 5, and preset level 1. Battery Indicator When the battery voltage is high, the five segment LCD is on. When the battery is under voltage, the outer frame of the battery 11

16 flashes, indicating that the battery is seriously under voltage and has to be charged immediately. Flashing under voltage Motor Power The display can show the output power of the current motor. The display mode is as shown below. Error Code When the e bike electronic control system fails, the display will automatically report the error code. See Table 1 for the definition of the detailed error code. 12

17 The fault display interface can only be exited when the fault is eliminated. After the fault occurs, the e bike will not be able to continue riding. Phone Charging (Only For Display with USB Port) Display with USB interface, this interface provides charging power for mobile phones, output 5VDC/500mA. When the display is off, connect the mobile phone data cable between the display and the mobile phone. And then turn on the display, it shows "USB" every 3S, indicating that the mobile phone is being charged; if the display is turned off at this time, the USB interface still provides the mobile phone charging function. In any state, unplug the phone and the charging will automatically terminate. 13

18 User Setting Preparation before Power On Make sure the connectors are docked firmly and turn on the e bike. General Setting Hold MODE button to start up. In the power on state, hold UP and DOWN buttons simultaneously for 2 seconds, the display enters the setting state. 14

19 Single Trip Clearance CL stands for single trip clearance, and the setting parameter is optional N/Y. The default N means that the single trip distance is not cleared. Y/N can be selected by UP / DOWN, Y means that the single trip distance needs to be cleared, and N means that the single trip distance does not need to be cleared. Backlight Brightness BL stands for backlight. Parameters 1, 2, and 3 can be set to indicate the brightness of the backlight. The factory default value is 1. The backlight brightness parameter can be changed by UP / DOWN. 1 is the darkest and 3 is the brightest. 15

20 Display Unit Unit represents the display unit. The parameter Metric/English can be set. The factory default is metric. The parameters can be changed by UP / DOWN. Exit Setting In the setting state, shortly press MODE button to confirm the input and enter the next setting; and hold MODE button to save and exit the setting state. 16

21 Password Setting Hold UP and DOWN buttons simultaneously for 2 seconds to enter the normal setting state; then hold UP and MODE buttons simultaneously for 2 seconds to enter the power on password setting state. The display prompts PAS.2, indicating that you need to enter the power on password. Press the MODE button to shift, and increase/decrease the input value by UP / DOWN. After the 4 digit password is entered, press the MODE key to confirm. If the password is correct, enter the power on password user setting interface, otherwise it will stay in the password input state. Hold MODE button to exit. The factory default is: Password Use By UP / DOWN to select Y/N. Y means that the power on password is required, and N means that the power on password is not required. Press MODE to confirm and enter the password 17

22 modification interface. Change Password PSD indicates the password. Press MODE to shift and increase/decrease the value by UP / DOWN. After the modification is completed, hold MODE button to save the confirmation and exit the setting state. Operation Parameter Setting Hold UP and DOWN buttons simultaneously for 2 seconds to enter the normal setting state; then hold MODE and 18

23 DOWN buttons simultaneously for 2 seconds to enter the operation parameter setting state. The display prompts PAS.1, indicating that you need to enter the permission password. press the MODE button to shift, and increase/decrease the input value by UP / DOWN. After the 4 digit password is entered, press MODE button to confirm. If the password is correct, enter the power on password setting interface, otherwise it will stay in the password input state. Hold MODE to exit. The permission password is: Wheel Size Setting LD stands for wheel diameter setting. Available values are: 16inch, 18 inch, 20 inch, 22 inch, 24 inch, 26 inch, 700C, 28 inch, 29 inch. Use UP / DOWN to select the wheel diameter corresponding to the e bike to ensure the accuracy of the speed display and mileage display. Press MODE to confirm and enter the speed limit setting interface. The factory default wheel diameter value is 19

25 Personalization In order to enhance the personalized use of this product, we have specifically added this setting. It can be set for different requirements of users. In this setting, the display"s battery indicator setting, PAS level setting, current limit setting, PAS sensor setting, speed sensor setting, throttle function setting and system setting are included. A total of seven items, detailed settings are shown in table 3. Personalization Password Input Hold UP and DOWN buttons simultaneously for 2 seconds to enter the normal setting state; then hold UP and DOWN buttons simultaneously again for 2 seconds to enter the personalized parameter setting state. The display prompts PAS.3, indicating that you need to enter the permission password. Press MODE button to shift, and 21

27 Battery Indicator Setting VOL indicates the battery indicator setting. It is required to input the voltage values of 1 to 5 one by one. Take the first battery value as an example: 1 on the display indicates the first voltage and 31.5 is the first battery value. Change the value by increasing/decreasing with UP / DOWN. Press MODE to confirm and enter the next battery value setting. After the 5 power values are set, press MODE to confirm and return to the personalization parameter setting interface. PAS Parameter Setting PAS Level Selection SCA indicates the PAS parameter setting. Eight modes are provided for selection: 0 3, 1 3, 0 5, 1 5, 0 7, 1 7, 0 9, 1 9. Switch between UP / DOWN, press MODE to confirm, and enter the 23

28 corresponding PAS ratio value setting interface. PAS Proportion Setting By setting the PAS proportion, you can adjust the speed of each gear to meet the needs of different riders. Taking the first gear as an example, is the recommended range of the PAS proportion, and 22 is the current value of the first gear (ie, the output is 22%). By increase/decrease settings with UP / DOWN. Press MODE to confirm and enter the next PAS proportion setting. After the setting is finished, press MODE to confirm and return to the personalization parameter setting interface. Refer to table 4 for details. 24

29 Current Limit Setting CUR indicates the current limit setting. The current limit can be set from A. Change the maximum current value of the controller by UP/DOWN. Hold MODE to confirm and return to the personalization parameter setting interface. The factory default value of the display is 15A. Depending on the hardware of the controller, the controller may not be able to reach the set 18A. 25

30 PAS Sensor Setting PAS Sensor Direction Setting Run indicates the PAS sensor direction setting. The display shows run.f/b. run.f stands for forward and run.b stands for reverse. Switch by UP / DOWN. Press MODE to confirm and enter the PAS sensor sensitivity setting. The factory default value of the sensor direction is positive. PAS Sensor Sensitivity Setting The display shows SCN, indicating the sensitivity of the PAS sensor. The setting range is indicate the highest sensitivity and 9 indicate the lowest sensitivity. Increase/decrease setting values by UP / DOWN. Press MODE to confirm and enter the PAS sensor proportion parameter setting interface. The factory default value is 2. 26

31 PAS Sensor Proportion Parameter Setting N represents the PAS sensor proportional parameter. The power sensor parameter values can be selected by UP / DOWN. The larger the value, the more obvious the PAS feeling. Hold MODE to confirm and return to the personalization parameter setting interface. 27

32 Speed Sensor Setting SPS indicates the speed sensor setting. It can be set according to the number of magnet heads mounted on the wheel of the e bike, and the setting range is 1 9. Modify it by pressing UP / DOWN. Hold MODE to confirm and return to the personalization parameter setting interface. The factory default value is 1. Throttle Function Setting Throttle Push Cruise Control Enable Setting HL indicates the throttle s push cruise control. HL: N means that the throttle does not has this function, and HL: Y means that throttle has this function, that is, when turning the throttle, the display enters the push cruise control mode. Y/N can be switched by UP / DOWN. If you select N, press MODE shortly to confirm and enter the throttle PAS level setting interface, otherwise there is no response. Hold MODE to confirm and 28

33 return to the display s personalization parameter setting interface. The factory default value of the display is N. Throttle Level Enable Setting HF indicates the throttle level setting. HF: N means that the throttle doesn t split levels according to the PAS ratio. If the throttle level splitting is enabled, the maximum output of the motor can only reach the speed of the corresponding PAS level shown on the display when turning the throttle; if no level splitting, it means that when the throttle is turned, the speed will not limited to the PAS level shown on the display, it can reach to the rated maximum speed. Y/N can be set by UP / DOWN. Press and hold MODE to confirm and return to the display s personalization parameter setting interface. The factory default value of the display is N. 29

35 Max Speed Limit Setting MAX SPEED indicates the maximum speed limit. The maximum speed limit value can be set by UP / DOWN, and the setting range is Km/h. Press MODE to confirm, and enter the push walk mode enable setting interface. The factory default is 25Km/h. This setting parameter is the upper limit specified by the display manufacturer. Push Cruise Control Enable Setting PUS indicates the push cruise control enable setting. Y/N can be switched by UP / DOWN. Y means enable, that is, hold DOWN, the push cruise control function can be realized; N means no enable, that is, no push cruise control function. Press MODE to confirm and enter the push cruise control speed 31

36 setting. The factory default value of the display is Y. Push Speed Setting PU indicates the push speed setting. By setting the assist speed value, you can adjust the pushing speed to meet the needs of different riders. Adjusted by UP / DOWN, the adjustable range is Press MODE to confirm and enter the slow start setting interface. The display defaults to 25 (ie, 25% output). 32

37 Slowly Start up Setting SP indicates the slowly start up setting. The adjustable range is is the slowest. Select with UP / DOWN. Press and hold MODE to confirm and return to the display s personalization parameter setting interface. The display defaults to factory default 1. Exit Setting In the personalized parameter setting state: press MODE to confirm the input to enter the next setting; hold MODE to confirm the current setting and exit the current setting state; hold DOWN to cancel the current operation, exit without saving the current set data. The display automatically exits the setting state without any operation for one minute. 33

38 Restore Default Setting DEF means to restore the default parameters. Hold DOWN and MODE buttons simultaneously for 2 seconds to enter the Restore Default Parameters interface. Switch Y or N with UP / DOWN. Y indicates that the default parameters need to be restored. Hold MODE to confirm. If you select Y, you need to enter the permission password to restore the default parameters. The permission password is Press MODE to shift and increase/decrease the value by UP / DOWN. After the 4 digit password is entered, press MODE to confirm. The display will automatically exit after successful recovery. 34

39 In the recovery default, the battery indicator, ODO and TRIP are unrecoverable, but the power on password is in recovery. FAQ Answers Q: Why can t turn on the display? A: Check if the battery power is turned on, the outer leakage cable is broken or not. 35

40 Q: What should I do if the display shows error code? A: Timely repair at the e bike repair shop. Quality Warranty And Coverage I. Warranty: 1. In the case of normal use, due to the quality problems caused by the product itself, the company will be responsible for the warranty during the warranty period. 2. The warranty: 24 months since the display out of the factory. 3. Regarding the storage and handling of the product, please comply with local laws and regulations and environmental requirements. II. The following conditions are not covered by the warranty: 1. The casing is opened 2. Connector is broken 3. The display leaves the factory, the casing is scratched or the casing is damaged. 4. Scratch or break of the display lead wire 5. Failure or damage caused by force majeure (such as fire, earthquake, etc.) or natural disasters (such as lightning strikes) 6. Product is out of warranty. 36

41 Circuit Block Diagram Standard Connector Wire Sequence Connect to the controller Display Outlet Connection Interface Table:Standard connector wire sequence table Standard Standard Wiring Function Wiring Color 1 Red(VCC) Display power Wire 2 Blue(K) Controller Power Control Wire 3 Black(GND) Display Ground Wire 4 Green(RX) Display Data Receiving Wire 5 Yellow(TX) Display Data Transmission Wire Note: Some products have waterproof connectors for the leads, and the user cannot see the color of the leads in the harness. 37

42 Software Version This operating instruction is general purpose software (version V1.0). Some of the version of the e bike LCD may have slightly difference, all with actual use version. 38

44 Attached Table 2:Password Checklist S/N Screen Display Password Description Default 2 Password Operation parameter setting password (Fixed) Power on password (Can be modified) Password for personality parameter setting (Fixed) Restore setup password (Fixed) 40

45 Attached Table 3:Personalization Parameters Table S/N Setting Item Screen Display Setting Content 1 Battery Indicator 5 Battery Value Setting Setting PAS Level Selection 2 PAS Level Setting PAS Ratio 3 Current Limit Limit Current Value setting PAS Sensor Direction 4 PAS Sensor Setting PAS Sensor Sensitivity 5 Speed Sensor Setting Speed Sensor Magnet Steel Number 41

46 Attached Table 3: S/N Setting Item Screen Display Setting Content Throttle Push Cruise Control Enable Setting 6 Throttle Function Throttle PAS Level Splitting Enable Setting Battery Delay Time Max Speed Setting Push Cruise Control 7 System Setting Enable Setting Push Speed Setting Slow Start Setting 42

I have fitted Woosh DWG22C rear hub motor kits to two of my bikes and have been very pleased with the results. The kits use cadence sensing and speed control to modulate the output from the motor. The controller is made by Lishui and the LCD display is a King Meter 529.

1) I understand that some displays / controllers allow a degree of user customisation, but I’ve not seen any way to modify the parameters of the King Meter 529. Is this LCD display ‘locked’ or is there any software to permit minor modifications? I’m not interested in changing the fundamental elements such as maximum permitted amps, just the power level settings.

2) Another possibility is to replace the King Meter 529 with one of the ‘better’ King Meter displays such as their SW-U model as this can also display the watts currently used by the motor. Not an essential feature but a ‘nice to have’.

I’m not sure if this display would connect to the existing Julet connectors in the Woosh harness or even if it can be obtained easily in the UK, but might be worth investigating. I have assumed that this display would be able to communicate with the Lishui controller as it is the same manufacturer as the original display.

KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378 USERS GUIDE KM6S LCD...

KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378 5.14.1 Personalized Password Input................... - 16 - 5.14.2 Battery Indicator Setting....................- 18 - 5.14.3 PAS Parameter Setting...................... - 18 - 5.14.4 Current Limit Setting......................- 19 -...

KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378 seconds to enter the personalized parameter setting state. The display prompts “PASSWORD 3”, indicating that you need to enter the permission password. Press MODE button to shift, and increase/decrease the input value by UP/DOWN.

KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378 PAS sensor direction setting 5.14.5.2 PAS sensor sensitivity setting The display shows SCN, indicating the sensitivity of the PAS sensor. The setting range is 2-9.

KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378 Max speed limit setting 5.14.8.3 Button Walk Assist Enable Setting PUS indicates the button walk assist function enable setting. Switch Y/N by UP/DOWN.

KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378 Battery Delay Time Max Speed Setting Button walk assist enable setting System Setting Walk assist speed setting Slow Start Setting - 33 -...

KING-METER TECHNOLOGY CO., LTD No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378 KING-METER - 35 -...