eizo lcd monitors quotation

EIZO manufacturers a wide variety of high-end monitors and display systems, including the industry-leading RadiForce, ColorEdge, FlexScan and DuraVision product lines.

Five preset modes (including two with user adjustable settings) ensure you always get the right setting for any application. You can switch modes at the touch of a button or automatically with the bundled ScreenManager Pro for LCD software.

A presence sensor called EcoView Sense 2 prompts the monitor to switch to power save mode when you are absent and then power on again when you return. It even works in a multi-monitor setup so all monitors remain on when you’re at your desk.

AC power cord, signal cables (DVI-D – DVI-D[dual link supported]), DisplayPort – DisplayPort), EIZO LCD Utility Disk (PDF user’s manual, ScreenManager Pro for LCD [DDC/CI], EIZO ScreenSlicer software), setup guide

The EIZO 19" Standard 4:3 Aspect Liquid Crystal Display (LCD) Monitor for Case is used in the Diagnostic ECG machines, X-ray machines, Computed Tomography (CT) machines, ultrasound machines, Magnetic Resonance Imaging (MRI) machines and many other Digital Imaging (DI) machines. They are used to monitor the status of the patient in 2D and 3D mode. It has a backlight for saving power, digital and analog input, built-in speakers and a few buttons on its front portion that are used to manage the screen. The brightness, color, contrast, aspect ratio of the screen can be adjusted as per the requirement using the buttons. It meets all mechanical requirements as per the design requirement specification and complies with the mechanical environmental tests, shipping and handling vibration and shipping classical shock. The product is made up of high quality material, that has very good mechanical, thermal, electrical and chemical properties. It is able to withstand a wide range of temperatures and pressures. It is free from dust, burrs, sharp edges, surface blemishes, sink marks and flash. The GE product is an innovation and technology which fits well into versatile customer needs. The product is securely packaged inside a high quality packing box to avoid physical damage during transit and labeled with details about the product, Quality Assurance (QA) seal and shipment details. It is widely being used in many medical machines.

The black FlexScan EV2436W 24" LCD Display with EasyPIX Color Matching Tool Kit from EIZO is an LCD monitor with ergonomic and eco-friendly features that supports five preset modes (including two with user adjustable settings) and helps to ensure you always get the right setting for any application.

These items have been refurbished. Refurbished items have been cleaned, tested, and confirmed to be fully functional. Grade A LCD screens are in great condition, have great picture quality and brightness with no scratches or discoloration. Grade A plastics/housings may show some limited signs of wear including slight discoloration and scratches that cannot be felt.

A manufacturer’s 5-year warranty covers all components including the LCD panel* to ensure a long service life. This warranty is 2 years or 67% longer than the standard 3-year warranty of most monitor brands for significantly lower running costs.

As part of its corporate social responsibility (CSR) activities, EIZO is contributing towards the United Nations’ Sustainable Development Goals (SDGs).

This contribution extends to our FlexScan Monitors; environmentally friendly monitors made with ever improving energy efficiency, using recycled plastics and sustainably procured materials, boxed in recyclable packaging, and with a responsible after-service recycling system.

Furthermore, with innovate technology and software, we aim to improve the working conditions and work efficiency of users. Through these features and more, FlexScan monitors are upholding the values of the UN’s Sustainable Development Goals, toward a brighter and more sustainable tomorrow.

AC power cord, signal cables (DVI-D - DVI-D, DisplayPort - DisplayPort), EIZO LCD Utility Disk (PDF user"s manual, ScreenManager Pro for LCD [DDC/CI], EIZO ScreenSlicer software), setup guide

Starting in the year 1998, we, “Rsg Solutions Pvt. Ltd.” are the importer, trader, and supplier of EIZO Medical Monitors. Offered products range consists of Apple Products, EIZO Graphic Series, and EIZO Flex Scan Series. The presented products are manufactured at vendors end by making use of supreme-grade inputs with the aid of modern machines. These products are known for their easy usability, long life, and low cost.

The black Eizo FlexScan EV2436W-BK 24 inch LCD Display from Eizo is an LCD monitor with ergonomic and eco-friendly features that supports five preset modes (including two with user adjustable settings) and helps to ensure you always get the right setting for any application. You can switch modes at the touch of a button or automatically with the bundled ScreenManager Pro for LCD software. It also comes with Eizo EasyPIX, a hardware calibration solution that directly adjusts the monitor"s color settings to ensure predictable color. It consists of software and the Eizo EX2 color sensor.

The EIZO RX1270 is EIZO’s highest resolution monitor at 12-megapixels. The resolution is approximately 1.3 times larger compared to EIZO’s former highest 8-megapixel RX850 monitor. This allows an even wider range of medical images to be viewed at once, including high volume images displayed in full, for increased reading efficiency. Consistent with EIZO’s line of multi-modality monitors, the RX1270 automatically distinguishes between monochrome and color, ensuring faithfully reproduced images for any modality.

The monitor realizes the ultra-high resolution of 12 megapixels on a 30.9-inch screen. The new design is more compact compared to two conventional 5 megapixel monitors used side by side. This all while including a built-in comfort light and internal power supply that do not impose on the workspace.

A medical monitor needs to be capable of high brightness in order to meet performance standards. However, in order to achieve high brightness in an LCD panel, the pixel aperture ratio has to be increased. This causes a typically unavoidable decline in sharpness. With EIZO’s unique Sharpness Recovery technology, the decrease in sharpness (MTF) is restored . This allows you to display an image safely on the monitor that is true to the original source data, even at high brightness levels.

EIZO offers anti-glare (AG) and anti-reflection (AR) screen variations to suit user environments. AG treatment is ideal for exceptionally bright environments and drastically reduces glare from ambient lighting. AR treatment is ideal for moderately-lit environments to reduce mild screen glare while maintaining crisp text and images.

The color and brightness of an LCD monitor can shift due to changes in ambient temperature and the temperature of the monitor itself. Medical Imaging RadiForce monitors are equipped with a temperature sensor for accurately measuring the temperature inside the monitor, as well as estimating the temperature of the surrounding environment. With this technology, the monitor adjusts in real-time so gradations, color, brightness, and other characteristics continue to display accurately.

Furthermore, EIZO uses AI (artificial intelligence) in the estimation algorithm of the RX1270 so it can distinguish between changing temperature patterns to calculate an even more accurate correction

EIZO carefully measures and sets each grayscale tone to create a monitor compliant with DICOM Part 14. This ensures the most consistent shading possible, allowing for the most accurate diagnosis.

1x Eizo Radiforce RX1270 12MP Color Mammography Display, AC power cord (3 m), USB cable (3 m) x 2, cable cover, Utility Disk (RadiCS LE, PDF installation manual), instructions for use. 5 year Manufacturer’s Warranty. Premium Service plans are available.

AC power cord, signal cables (DVI-D – DVI-D [dual link supported], Mini DisplayPort – DisplayPort), USB cable, setup guide, EIZO LCD Utility Disk (PDF user’s manual), adjustment certificate, quick reference, warranty card

The monitor is precalibrated to meet the DICOM Part 14 standard, thereby ensuring permanently consistent image transmission. The five default look-up tables (LUTs) contain practice-based settings. They take into account the DIN 6868-157 room classes, thereby meeting current specifications for diagnostic monitors.

An integrated brightness sensor, using EIZO fully automated brightness control, ensures fast luminance stabilization during system start and compensates for fluctuations that occur in the course of operation due to different ambient temperatures.