waveshare lcd screen price

Waveshare makes some of the highest-quality displays, sensors and Raspberry Pi accessories out there. We"re proud to stock one of the internet’s largest assortments of their products.

Need a display for your Raspberry Pi project? Waveshare has a complete assortment of displays including everything from touchscreen LCDs, to OLED displays, and even three-colour E-Ink Displays.

For the Raspberry Pi Pico fans out there, Waveshare offers an assortment of compatible modules such as a 1.3” OLED display If you are new to the Raspberry Pi Pico, the Raspberry Pi Pico MicroPython Learning Kit is a great place to start.

BBC Micro:bit enthusiasts are covered as well, with Waveshare offering a 1.8” Colour display module, Motor and Servo Driver module, as well as robot kits for you to build, such as the KitBot Tracked Robot kit!

Waveshare 20109 - 5inch Capacitive Touch Screen LCD (H) Slimmed-Down Version, 800×480, HDMI, Toughened Glass Panel, Low Power Consumption - 5inch HDMI LCD (H) V4

Waveshare 11750 - 10.1inch Capacitive Touch Screen LCD (B), With Case And Toughened Glass Cover, 1280×800, HDMI, IPS Screen, Supports Raspberry Pi And PC, Low Power Consumption - 10.1inch HDMI LCD (B) (with case)

Waveshare 22689 - 1.9inch Segment E-Paper Module, 91 Segments, I2C Bus, Ideal For Temperature And Humidity Meter, Humidifier, Digital Meter - 1.9inch Segment e-Paper Module

Build a full-featured media center capable of playing nearly all of your digital media using any 40 pin Raspberry Pi and the Media Center HAT Raspberry Pi touchscreen display. Native support in...

This is a 2.8inch TFT LCD with resistive touch panel, has 320x240 resolution. It can support any revision of Raspberry Pi. Driver is provided for Raspbian/Ubuntu Mate/kali.

This is a 3.2inch TFT LCD with resistive touch panel, has 320x240 resolution. Can support any revision of Raspberry Pi. Driver is provided for Raspbian/Ubuntu Mate/kali.

This is a 3.2inch TFT LCD with resistive touch panel, has 320x240 hardware resolution.Support up to 125MHz high-speed SPI signal transmission provide you a clear and stable display effect.. Can directly plug to any revision of Raspberry Pi. Driver is provided for Raspbian/Ubuntu Mate/kali and Retropie(Can only display when working with Retropie).

This is a 3.5inch TFT LCD with resistive touch panel, has 480x320 resolution. Can support any revision of Raspberry Pi. Driver is provided for Raspbian/Ubuntu Mate/kali.

This is a 3.5inch TFT LCD with resistive touch panel, has 480x320 resolution. Can support any revision of Raspberry Pi. Driver is provided for Raspbian/Ubuntu Mate/kali. And this is an IPS screen which has wider viewing angle.

This is a 3.5inch TFT LCD with resistive touch panel, has 480x320 resolution. Support up to 125MHz high-speed SPI signal transmission provide you a clear and stable display effect.. Can directly plug to any revision of Raspberry Pi. Driver is provided for Raspbian/Ubuntu Mate/kali and Retropie(Can only display when working with Retropie).

This is a 3.5inch IPS screen with resistive touch panel, has 480x320 hardware resolution, use HDMI interface for displaying and GPIO for touching. Touch driver is provide for Raspbian, Ubuntu Mate,Kali and Retropie(Can only display when working with Retropie).

This is a 4inch TFT LCD with resistive touch panel, has 480x320 resolution. Support up to 125MHz high-speed SPI signal transmission provide you a clear and stable display effect. Can directly plug to any revision of Raspberry Pi. Driver is provided for Raspbian/Ubuntu Mate/kali and Retropie(Can only display when working with Retropie).

This is a 4.3inch IPS screens, 800x480 resolution, HDMI display. Designed for Raspberry Pi. Driver is required for touching. Note that this LCD can only support Raspberry Pi

This is a 5inch Resistive Touch Screen LCD, 800x480 resolution, HDMI interface. Designed for Raspberry Pi. Note that this LCD can only support Raspberry Pi.

The 5-inch Resistive Touch Screen LCD display provides various support systems such as Raspberry Pi, Banana Pi, Banana Pro, BeagleBone Black, etc.  This Resistive Touch Screen display supports Windows 10/8.1/8/7 OS. For the Windows 10/8.1/8 OS. This LCD display can support Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT systems. When the LCD display works on systems such as Raspberry Pi, the resolution must be set manually, otherwise, it will cause an abnormal display. There is no such problem when the LCD works on the PC version of Windows.

The built-in HDMI interface enables the Waveshare display to work as a computer monitor just like any other HDMI screen. The Touch Screen display comes with a preloaded Raspbian driver and Ubuntu image. The 800x480 high-resolution display has separate interfaces for touch control and display control. While the display is controlled over the HDMI interface the touch control is done via USB interface. To reduce the power consumption backlight of the display can be switched on/off as per user preference.

This is a new Pi Pico display from Waveshare with many more pixels. It is a 2inch LCD display module, designed for Raspberry Pi Pico, with an embedded ST7789VW driver, 65K RGB colours, 320x240 pixels and an SPI interface. A Pi Pico can be plugged into the rear of the screen for very easy connection without any soldering. It sports 4 simple button switches for user input. It is bright, colourful and easy to program. The makers supply an example program (see below), which includes the display driver, making it very easy to get started. The manufacturer"s wiki can be found at:

3.5" TFT LCD Touch Display is used by adding it to Raspberry Pi as an alternative to a HDMI monitor and it allows you to make a real mobile computer by saving you from the clutter of monitor, keyboard, mouse cable.

The waveshare LCD 7inch display module with Capacitive touch and HDMI Media Interface is an ideal solution for single-board computer display. Easy to use, this LCD supports SBC’s like Raspberry Pi, Beagle Bone Black, Banana Pi etc. Ideal for your application if it involves Video playing etc.

The driver used in this LCD is GC9A01, with a resolution of 240RGB×240 dots and 129600 bytes of GRAM inside. This LCD supports 12-bits/16-bits/18-bits data bus by MCU interface, which are RGB444, RGB565, RGB666.

For most LCD controllers, the communication method of the controller can be configured, they are usually using 8080 parallel interface, 3-line SPI, 4-line SPI, and other communication methods. This LCD uses a 4-line SPI interface for reducing GPIO and fast speed.LCD

If you are wondering which point is the first pixel of the screen (because the screen is round), you can understand it as a square screen with an inscribed circle drawn in it, and it only displays the content in this inscribed circle. The pixels in other locations are simply discarded (just like most round smartwatches on the market)

The Waveshare 1.44in LCD Display Module for RPi Pico, 65K Colors, 128×128, SPI comes with development resources and a manual. It provides a resolution of 128 x 128 pixel, 65K RGB colors, clear and colorful displaying effect.

This is a Waveshare 5-inch Capacitive Touch Screen LCD, with a resolution of 800x480 and a capacitive touch panel, which supports Raspberry Pi and can also be used as a computer monitor. This product supports Windows 10/8.1/8/7 OS. For the Windows 10/8.1/8 OS, the touch screen supports multi-touch up to 5 points. For some Windows 7 OS, the touch screen supports single touch only. This LCD can support Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT systems. When the LCD works on systems such as Raspberry Pi, the resolution must be set manually, otherwise, it will cause abnormal display. There is no such problem when the LCD works on the PC version of Windows.