5 tft lcd capacitive touchscreen manufacturer

The CFAF800480E0-050SC is a 5-inch color TFT LCD graphic display module with high-brightness, sunlight-readable backlight and a capacitive touch panel (CTP).

The touch panel can detect up to 5 separate touch points. This TFT display is suitable for industrial, media, embedded and other general-purpose display applications.

ER-TFTM050A2-3-3661 is 800x480 dots 5" color tft lcd display with RA8875 controller board and capacitive touch panel with touch controller,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for5" TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

Take your product to the next level with a capacitive touch screen LCD by Displaytech. Our PCAP (projected capacitive) touch screen technology is a premium alternative to a resistive touchscreen. We offer capacitive touchscreens for our 2.8-inch, 3.5-inch, 4.3-inch, 5-inch and 7-inch TFT LCD displays.

Capacitive touch technology allows for an enhanced product user interface since it supports gestures and proximity sensing. Unlike resistive touch screens which rely on pressure, capacitive touch responds to an electric current and can handle multi-finger touch points. This means that capacitive touchscreens can be used with your bare finger and it supports gestures such as pinch-to-zoom or swipe.

The TFT display module supports up to 24-bit pixel format (RGB: 888), allowing a true-color palette of 16,7 million colors, and resolution of 800 x 480 pixels.

The Capacitive touch panel is activated with anything containing an inductive load such as a finger or stylus. It allows for multi-touch options. When using the capacitive touch screen, the display needs a separate controller to interface with the touch panel. The display for capacitive touch is brighter since the touch panel is transparent.

The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

Capacitive touchscreen TFT LCDs are available in 2.8", 3.5", 4.3", 5.0", 7.0", and 10.1" diagonal sizes. Capacitive touch TFTs offer excellent contrast and clarity, have a built-in I2C interface, excellent dragging performance, and accept multi-point inputs, also known as multi-touch.

This 5" LCD is a 800x480 high resolution IPS TFT display. The IPS technology delivers sunlight readable image quality with higher brightness, better color reproduction, image consistency and optical characteristics at any angle. This 24-bit true color Liquid Crystal Display with parallel RGB interface, includes better FPC design with EMI shielding on the cable. It also has a built-in ST7262 IC driver and offers the same mechanical footprint and pinout as the TN display. This TFT is RoHS compliant and has a 5-point mulit-touch capacitive touchscreen.

Enhance your user experience with capacitive or resistive touch screen technology. We’ll adjust the glass thickness or shape of the touch panel so it’s a perfect fit for your design.

The HY050CTP-HD 5 inch LCD Module is designed to work with HAOYU Electronics"s ARM development boards and MarsBoard"s single board computers. It has one 5 inch TFT LCD including capacitive touch screen with 800 by 480 pixels resolution.

WF50DTYA3MNG10 is a 5 inch IPS TFT display with projected capacitive touch panel optical bonding technology on module. This 5 inch TFT-LCD module supports (Mobile Industry Processor Interface) DSI (Display Serial Interface) interface and is featured with IPS panel which having the advantages of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical) and having HD 720 x1280 resolution. It can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

This 5 inch portrait mode TFT LCD integrated driver IC ILI9881C on module and capacitive touchscreen IC GT928, power supply for analog circuit range from 2.5v to 3.6v. The model is adopting optical bonding solution capacitive touch panel which featuring the advantage of increases the ruggedness of the display and improving durability to having better able to resist scratches, fluids, stains and dirt.

Different bonding: air bonding; OCA (Optically Clear Adhesives, 0.175-0.2mm), OCR ( Optically Clear Resin 0.3-0.5mm); TOCA (Thermal-melt optical clear adhesive, 0.2-2.0mm).

Different kinds of cover lens: Chemically Strengthened Soda Lime Glass; Dragontrail Glass; Gorilla Glass, Plastic(PMMA/PC), Curve and flexible cover lens with different thickness . Glass sensor thickness: 0.4/0.5/0.7/1.1mm. Plastic cover lens: 0.6/1.0/1.5/1.8/2.0/2.5/3.0mm; Glass cover lens: from 0.5mm to 15mm.

TFT Display modules with Capacitive Touch Screen are more user-friendly and have better performance compared with the ones with Resistive Touch Screen. There are many combinations of TFT display modules with projected capacitive touchscreen (PCAP) for you to choose from. We offer modules with various features including modules with control board, wide viewing angle, sunlight readable, wide temperature, and Monochrome. The available sizes are 0.96", 3.5", 3.9", 4.3", 5", 5.2" 5.7", 7" and 10.1"

_linkedin_partner_id="3704540";window._linkedin_data_partner_ids=window._linkedin_data_partner_ids || [];window._linkedin_data_partner_ids.push(_linkedin_partner_id);(function(l){if (!l){window.lintrk=function(a,b){window.lintrk.q.push([a,b])};window.lintrk.q=[]}var s=document.getElementsByTagName("script")[0];var b=document.createElement("script");b.type="text/javascript";b.async=true;b.src="https://snap.licdn.com/li.lms-analytics/insight.min.js";s.parentNode.insertBefore(b, s);})(window.lintrk);!function(e,t,n,s,u,a){e.twq||(s=e.twq=function(){s.exe?s.exe.apply(s,arguments):s.queue.push(arguments);},s.version="1.1",s.queue=[],u=t.createElement(n),u.async=!0,u.src="//static.ads-twitter.com/uwt.js",a=t.getElementsByTagName(n)[0],a.parentNode.insertBefore(u,a))}(window,document,"script");// Insert Twitter Pixel ID and Standard Event data belowtwq("init","o7d7m");twq("track","PageView");!function(f,b,e,v,n,t,s){if(f.fbq)return;n=f.fbq=function(){n.callMethod? n.callMethod.apply(n,arguments):n.queue.push(arguments)}; if(!f._fbq)f._fbq=n;n.push=n;n.loaded=!0;n.version="2.0"; n.queue=[];t=b.createElement(e);t.async=!0; t.src=v;s=b.getElementsByTagName(e)[0]; s.parentNode.insertBefore(t,s)}(window, document,"script", "https://connect.facebook.net/en_US/fbevents.js"); fbq("init", "616977416246334"); fbq("track", "PageView");

Touch screen capacitive 5" for the Raspberry Pi with a resolution of 800 x 480 px. Works with any 40-pin version of the Rasbperry Pi with HDMI connector and microUSB - cables are included in the package. The board also has a mini-Jackconnector. The device also works with minicomputers:Banana PiandBeagle Bone Black, and all devices with HDMI, such as game consoles, desktop computers, etc.

The resolution of the LCD display is 800 x 480, you can configure the resolution via software, and the maximum resolution it supports is 1920 x 1080. It is a USB capacitive touch screen and does not require a driver. It supports five touch control, besides that, the LCD screen comes with an OSD menu adjustment function. You can adjust the contrast, brightness, and switch button. There are 9 interfaces on the back of the screen, one earphone for audio output; two touches (USB connector), for power supply and touch output; one display, an HDMI-compatible interface, for connecting the motherboard and LCD display. One power, it can control the backlight to turn on and turn off to save power. One return, it’s only useful in the OSD menu. One right/down, backlight shortcut key. One left/up, backlight shortcut key. A menu, it’s useful in the OSD setting menu, open the OSD/ select key.

In order to meet the increasing need of compact HDMI displays, especially for some popular single-board computers like the Raspberry Pi, the UCTRONICS team now releases a 5-inch HDMI LCD display with capacitive multi-touch touchscreen