tft display vs amoled in hindi brands

There is a constant debate on Amoled vs LCD, which is a better display? Where Amoled display offers some remarkable colors with deep black eye-soothing contrast ratio, LCD displays offer much more subtle colors with better off-axis angles for viewing & offers a much brighter picture quality.

While purchasing a new smartphone we consider various specifications like software, camera, processor, battery, display type etc. Among all the specifications display is something that most people are concerned about. 2 of the major competitors of smartphone display are AMOLED and LCD. Often in the LCD vs Amoled comparison, people get confused about which one to choose. In this article, we have explained a clear comparison of the Amoled vs LCD screen to find out which is actually better.

Amoled display is nothing but a part of OLED display which comes with some extra features. The first component is Light Emitting Diode (LED) and the second component is "O", here "O" stands for organic & together they make OLED. The real meaning derived from it is organic material placed with 2 conductors in every LED. And this is how light is produced.

The OLED display can generate light out of individual pixels. AMOLED displays contain Thin Film Translator (TLT) which makes the overall procedure of sourcing current to the correct pixel much quicker and smoother. The TXT further helps grab control for operating different pixels at a time. For example, some pixels could be absolutely switched off though others remain on in Amoled displays. This produces a deep black color.

Speaking about LCDs, it is relatively pretty much commonly found in today"s smartphones. LCD (Liquid Crystal Display) offers a devoted black light that is white or rather slightly blueish in color. Mostly here we get a blue light that is passed through some yellowish phosphor filter which brings out the white light. The white light is subsequently passed through multiple filters and thereafter the crystal elements are again passed through blue, red & green filters. Note that LCD displays have both passive and active matrix which depends on the cost and requirement involved.

Since the process involved in LCDs is much more complex than Amoled & requires extra steps, when compared to AMOLED displays, LCDs are less battery friendly. In the technological era where energy efficiency is the first priority, Amoled displays are certainly going to be the future of display technology. But both of them come with a separate set of pros and cons and it is only by knowing the pros and cons you will be able to choose the right one.

Amoled display technology is mostly used in smartphones, media players & digital cameras. Amoled is mostly used in low power, cost-effective & large application sizes.

Cost is one of the major factors that act as a differentiator between the two display types. Amoled displays are comparatively more expensive than LCD displays because LCD displays are much cheaper to manufacture. So while buying a low-budget smartphone, the probability to get a Amoled display is pretty less.

The quality of a display is mainly measured according to the colors and sharpness it offers. Also while comparing two displays, only technology comparison won"t work because often displays behave inversely even if a manufacturer is using the very same technology. If you consider colors especially contrasting colors such as blue, red or green, Amoled will serve better throughout the day. This happens mainly because in the case of AMOLED displays, as mentioned above, every pixel present in it emit its own light whereas in LCD light comes out of the backlight. Therefore Amoled displays offer high-end saturation and vibrant colors compared to LCD displays.

As Amoled displays put out vibrant colors, you will find Amoled displays to be warmer in nature compared to LCD displays which has a more neutral whitish tint. In short, the pictures seen on Amoled displays are more eye-soothing compared to LCD displays where the pictures appear more natural.

In the Amoled vs LCD screen display comparison, another thing to consider is the brightness offered by both of them. Compared to LCD displays, Amoled displays have lesser brightness levels. This is mainly because of the backlight in LCD displays which emits a higher brightness level. Therefore if you are a person who spends most of the time outdoors and mostly uses your smartphone under the sun, then LCD is the right choice for you. Although certain leading brands are working on the brightness level in Amoled displays.

The display is one such thing that sucks your phone"s battery to a great extent. In Amoled displays, the pixels can get absolutely switched off thereby saving a lot of battery. Whereas LCD displays remain dependent on the back light, as a result even if your screen is completely black, the backlight remain switched on throughout. This is why even though Amoled displays are more expensive than LCD displays as they consume much less battery than LCD displays.

In the battle between LCD display vs Amoled display both come with separate pros and cons. Well if battery consumption and color contrast or saturation is a concern then the Amoled display is going to win over LCD display anyway. While purchasing a smartphone, customers today mainly focus on two features- lesser battery consumption and a high-quality display. Amoled display offers both the benefits- high-end vibrant display and less battery consumption. The only criteria where LCD displays win over Amoled is the brightness level. But with brands coming with the latest technologies, Amoled is certainly going to catch up with the brightness level with LCD displays. Also, the brightness difference in current Amoled display smartphones that are available in the market is hardly noticeable.

The demand for the best visual experience has grown higher over recent years. Everyone wants the best in the class display to their smartphones to view the high-definition magic their phone provides. This demand for better display has risen recently as big brands like iPhone and Samsung have added some absolutely gorgeous displays to their smartphones.

The major battle begins here. The two competitors of the game are LTPS LCD and AMOLED. These are state of the art displays and people often find themselves comparing these two displays. People are wondering about the result for LTPS vs AMOLED.

LTPS and AMOLED comparison has always been an interesting debate. Potential buyers of smartphones keep comparing the difference between LTPS and AMOLED. There is a complete LTPS and AMOLED comparison below which outlines the difference between these two types:

LTPS stands for Low-Temperature PolySilicon. This type of display provides a faster and more integrated display compared to a standard LCD. The LTPS display provides a better picture quality for the user and some people consider it to be more true to life. It provides larger picture densities and is also lower on power consumption as it does not light up every pixel individually. People can expect a higher picture resolution in their displays.

AMOLED stands for Active Matrix Organic Light Emitting Diode. AMOLED displays are completely different. They use an array of LEDs that help light up every pixel individually, so the only area of the display that is in use, only those pixels light up and the others stay shut. This helps provide a higher contrast to the image with very deep blacks. The display also helps in power consumption as every pixel draws power individually.

There is no actual winner to this debate, just like the console war or the Android vs Apple debate. The choice depends completely on the user and their tastes and preferences. If the users want a better picture resolution in their display, they can go with LTPS LCD and if the user wants a higher contrast picture to their display then they can go with AMOLED. Both displays deteriorate faster than standard LCD screens. Apple is known to use LCD panels in their smartphones and Samsung is known to use AMOLED ones. These are the points that can help the user make an informed decision about which display they would want to go with.

आपके स्मार्टफोन की डिस्प्ले के बारे में आप कितना जानते हैं? डिस्प्ले के नाम जैसे कि AMOLED, OLED, LCD, TFT के बारे में आप कितना विस्तार से जानते हैं? इनके नाम बहुत छोटे हैं, लेकिन इनमें से कौन-सा बेहतर है, किस रिफ्रेश रेट के साथ आता है, रेज़ॉल्यूशन कितना है इन सब सवालों को जानकर यदि आप अपने लिए स्मार्टफोन चुनना चाहते हैं तो आपके इन सभी प्रश्नों के उत्तर मिलेंगे यहाँ।

पिछले कुछ सालों में स्मार्टफोन की डिस्प्ले काफी बेहतर हुई हैं। लेकिन प्रत्येक स्मार्टफोन डिस्प्ले के साथ जो शार्ट-फॉर्म एक संक्षिप्त नाम जुड़ता है, जैसे कि AMOLED, LCD, इत्यादि वो केवल नाम नहीं बल्कि अपने आप में एक तकनीक है। स्मार्टफोन पर लगे पैनल AMOLED, OLED, LED, LCD, IPS, TFT, LTPS, इत्यादि होते हैं। ये सभी पूर्णत: अलग होते हैं।

पहले ही इतने टाइप के पैनल मौजूद हैं, ऐसे में स्मार्टफोन निर्माता द्वारा फैंसी नामों का इस्तेमाल जैसे कि Apple द्वारा Super Retina XDR और Samsung द्वारा Dynamic AMOLED ग्राहकों के बीच भ्रम या असमंजस को और बढ़ा देता है।

डिस्प्ले के टाइप तो बहुत सारे हैं जैसे कि TFT, LTPS, AMOLED, OLED, IPS, LCD इत्यादि। लेकिन इन दिनों TFT, LTPS जैसी डिस्प्ले काफी कम हो गयीं हैं। किफ़ायती दामों पर और मिड-रेंज में आने वाले फोनों में आपको IPS LCD डिस्प्ले मिलेगी। लेकिन इन सबका विस्तार से समझें, तो मतलब क्या है ?

अगर संक्षिप्त रूप से और आसान भाषा में समझें तो दो तरह की टेक्नोलॉजी- एलसीडी (LCD) और ओलेड (OLED) बाज़ार में आ रहीं हैं। प्रत्येक में कुछ विभिन्न प्रकार और जनरेशन हैं जो बाकी के स्क्रीन टाइप शार्ट फॉर्म को बनाती हैं। इसी तरह टेलीविज़न की दुनिया में भी अलग स्क्रीन टाइप उपलब्ध हैं जैसे कि LED, QLED, miniLED – ये सब दरसअल एलसीडी (LCD) तकनीक के ही अलग अलग रूप हैं जिनमें थोड़ी विविधताएं हैं।

LCD का मतलब या फुल फॉर्म है लिक्विड क्रिस्टल डिस्प्ले (Liquid Crystal Display)। इसमें लिक्विड क्रिस्टल्स की एक श्रंखला दी जाती है जिसके पीछे एक बैकलाइट होती है। इस डिस्प्ले टाइप का हर जगह आसानी से उपलब्ध होना और कम दामों में इसका निर्माण इसे स्मार्टफोनों के लिए एक प्रचलित विकल्प या पसंद बनाता है।

स्मार्टफोनों में आपको दोनों डिस्प्ले TFT और IPS मिलती हैं। TFT का फुल फॉर्म है – Thin Film Transistor, जो LCD का ही एक बेहतर या एडवांस्ड वर्ज़न है, जो एक एक्टिव मैट्रिक्स (active matrix) का इस्तेमाल करता है। active matrix का अर्थ है कि प्रत्येक पिक्सेल एक अलग ट्रांजिस्टर और कपैसिटर से जुड़ा होता है।

TFT डिस्प्ले का सबसे बड़ा फायदा यही है कि इसके प्रोडक्शन में तुलनात्मक कम खर्च होता है और इसमें असल LCD के मुकाबले ज्यादा कॉन्ट्रास्ट मिलता है। वहीं TFT LCD में नुकसान ये है कि इन्हें रेगुलर LCD प्रकारों के मुकबाले ज्यादा एनर्जी यानि बैटरी चाहिए, इनके व्यूिंग एंगल और रंग भी इतने अच्छे नहीं होते। इन्हीं सब कारणों से बाकी डिस्प्ले विकल्पों की गिरती कीमतों के कारण अब TFT डिस्प्ले का इस्तेमाल स्मार्टफोनों में नहीं किया जाता।

TFT(Thin Film Transistor) – ये भी LCD डिस्प्ले का ही एक प्रकार है जिसमें नीचे एक पतली सेमीकंडक्टर की परत होती है जो हर एक पिक्सल पर रंगों को नियंत्रित करने का काम करता है। इसका और AMOLED में आने वाले AM यानि कि active matrix का काम लगभग एक ही है।

LTPS(Low Temperature PolySilicon) – ये भी Si (amorphous silicon) तकनीक पर आधारित TFT का ही वैरिएंट है जिसमें आपको हाई रेज़ॉल्यूशन मिलता है और ऊर्जा यानि कि पॉवर साधारणत: TFT से कम लेता है।

IGZO(Indium Gallium Zinc Oxide) – ये भी एक सेमिकंडक्टर मैटेरियल है जो डिस्प्ले के नीचे लगी फिल्म में इस्तेमाल होता है और आजकल a semiconductor material used in TFT films, which also allows higher resolutions and lower power consumption, and sees action in different types of LCD screens (TN, IPS, VA) and OLED displays

LTPO( Low Temperature Polycrystaline Oxide) – इस टेक्नोलॉजी को Apple ने डेवेलप किया है और इसे वर्तमान समय में OLED और LCD दोनों तरह की स्क्रीन में इस्तेमाल किया जाता है। इसमें LTPS और IGZO दोनों तकनीकों का इस्तेमाल मिलाकर किया जाता है और नतीजा होता है – डिस्प्ले द्वारा पॉवर का कम इस्तेमाल। ये Apple Watch 4 और Galaxy S21 Ultra में आयी है।

IPS तकनीक को In-Plane Switching तकनीक कहते हैं। IPS टेक्नोलॉजी ने सबसे पहले आयी LCD डिस्प्ले में आने वाली समस्या को दूर किया जिसमें TN तकनीक का इस्तेमाल होता था और इसमें साइड से देखने पर रंग बहुत ख़राब नज़र आते थे। ये कमी ज़्यादातर सस्ते स्मार्टफोन और टैबलेटों में नज़र आया करती थी।

PLS (Plane to Line Switching) – PLS और IPS के नाम या उनके फुल फॉर्म लगभग एक ही जैसे लगते हैं। लेकिन इसमें आश्चर्य की कोई बात नहीं है क्योंकि इनका मुख्य कार्य भी एक समान ही है। PLS टेक्नोलॉजी को Samsung Display द्वारा बनाया गया है और IPS डिस्प्ले की ही तरह इसकी विशेषता भी डिस्प्ले पर अच्छे रंग दर्शाना और बेहतर व्यूइंग एंगल दिखाना ही हैं। लेकिन इसमें OLED और LCD/VA डिस्प्ले के मुकाबले कॉन्ट्रास्ट थोड़ा कम है।

Samsung Display का कहना है कि PLS पैनलों के उत्पादन में लागत कम लगती है, ब्राइटनेस लेवल अच्छा मिलता है और प्रतियोगी कंपनी LG Display के IPS पैनलों के मुकाबले व्यूइंग एंगल भी काफी अच्छे मिलते हैं। अंतत: PLS पैनल का उपयोग किया जाए या IPS पैनल का इस्तेमाल करें, ये पूरी तरह से स्मार्टफोन निर्माताओं पर निर्भर करता है।

AMOLED की फुल फॉर्म – एक्टिव मैट्रिक्स ऑर्गेनिक लाइट एमिटिंग डायोड (Active Matrix Organic Light-Emitting Diode) है। हालांकि ये सुनने में बहुत मुश्किल नाम लग रहा होगा, लेकिन ये है नहीं। हम पहले ही TFT LCD टेक्नोलॉजी में एक्टिव मैट्रिक्स के बारे में पढ़ चुके हैं और अब रहा OLED, तो ये केवल एक पतली फिल्म वाली डिस्प्ले तकनीक है और कुछ नहीं।

और क्योंकि OLED डिस्प्ले में काले पिक्सल बंद हो जाते हैं, उनमें करंट नहीं आता, इसीलिए कॉन्ट्रास्ट लेवल भी LCD डिस्प्ले के मुकाबले ज्यादा मिलता है। AMOLED डिस्प्ले में रिफ्रेश रेट तो ज़्यादा मिल जाता है, लेकिन वहीँ LCD डिस्प्ले को, AMOLED की तुलना में ज्यादा ब्राइट बनाया जा सकता है। क्योंकि ये एक ऑर्गेनिक मैटीरियल से बने होते हैं, एक लम्बे समय के इस्तेमाल के बाद इनकी ब्राइटनेस घटने लगती है जिससे कई बार स्क्रीन बर्न-इन जैसी समस्याएं भी आ सकती हैं। हालाँकि ये समस्या पुराने स्मार्टफोनों में ज्यादा आती थी, अब ऐसा ना के बराबर होता है।

वहीँ इसकी अच्छी बात ये है कि AMOLED डिस्प्ले LCD के मुकाबले पतली होती हैं क्योंकि इनमें अंदर बैकलिट की परत लगाने की ज़रुरत नहीं पड़ती और इन्हें फ्लेक्सिबल यानि कि लचीला भी बनाया जा सकता है।

OLED को- Organic Light Emitting Diode कहते हैं। एक OLED डिस्प्ले electroluminescent मैटीरियल की पतली शीट से बनी होती है, जिसका सबसे बड़ा फायदा यही है कि ये अपनी रौशनी खुद पैदा करते हैं और इन्हें बैकलाइट की ज़रुरत नहीं पड़ती, जिससे ऊर्जा या बिजली की ज़रुरत कम पड़ती है। यही OLED स्क्रीन जब स्मार्टफोन या टीवी के लिए उपयोग होती है तो इसे ज़्यादातर AMOLED डिस्प्ले के नाम से जाना जाता है।

जैसे कि हमने पहले भी बताया AMOLED में AM एक्टिव मैट्रिक्स (Active Matrix) के लिए इस्तेमाल होता है। हालाँकि ये पैसिव मैट्रिक्स (Passive Matrix) OLED से अलग होता है जिसे p-OLED कहा जाता है। ये स्मार्टफोनों में थोड़ा कम प्रचलित है।

वहीं Super AMOLED, दक्षिणी कोरियाई कंपनी Samsung द्वारा दिया गया है एक नाम है जो अब कंपनी के मिड-रेंज से प्रीमियम रेंज के स्मार्टफोनों में देखने को मिलता है। IPS LCD की ही तरह, Super AMOLED डिस्प्ले में साधारण AMOLED डिस्प्ले पर टच रिस्पांस लेयर को जोड़कर एक किया जाता है, इसमें अलग से एक परत नहीं लगाई जाती। और इसका नतीजा ये होता है कि Super AMOLED स्क्रीन सूरज की रौशनी या आउटडोर में AMOLED के मुकाबले बेहतर नज़र आती हैं और साथ ही ये पावर भी कम लेती हैं।

जैसे कि Samsung ने इस स्मार्टफोन डिस्प्ले टाइप का नाम -Super AMOLED रखा है। साधारण भाषा में ये AMOLED स्क्रीन का सुधार किया गया या कहें कि बेहतर वर्ज़न है। और ये केवल मार्केटिंग के लिए मारने वाली डींगें नहीं हैं, बल्कि कई उत्पादों की समीक्षा (review) करने बाद, तथ्य यही है कि Samsung की डिस्प्ले बाज़ार में सबसे उत्तम श्रेणी में आती हैं।

वहीँ इसकी तकनीक में किये गए सबसे नए विकास या सुधार को कंपनी ने Dynamic AMOLED का नाम दे दिया। . हालांकि Samsung ने इसके बारे में कभी विस्तार से नहीं बताया है लेकिन इतना साफ़ कर दिया है कि इस तरह की डिस्प्ले में HDR10+ सर्टिफिकेशन शामिल होता है जिसके साथ आपको स्क्रीन पर रंगों और कॉन्ट्रास्ट की एक वाइड रेंज मिलती है। साथ ही इसमें ब्लू लाइट कम होती जिससे ये डिस्प्ले आँखों के लिए ज्यादा आरामदायक हो।

ठीक इसी तरह OnePlus ने भी हाई-एंड स्मार्टफोनों के लिए नाम रखा है – Fluid AMOLED, जिसमें हाई रिफ्रेश रेट ही इसकी ख़ास बात है, इसमें कोई और अंतर नहीं होता। उदाहरण के लिए – डिस्प्ले अगर 120Hz रिफ्रेश रेट के साथ आएगी तो उसमें आपको और ज्यादा स्मूथ एनीमेशन मिलेगा।

पिक्सल डेंसिटी की बात करें तो, 2010 में iPhone 4 के लॉन्च के समय Apple का मुख्य आकर्षण यही था। इस स्मार्टफोन डिस्प्ले में कंपनी ने LCD डिस्प्ले का इस्तेमाल किया। इस LCD पैनल ((LED, TFT, और IPS) को हाई रेज़ॉल्यूशन (उस समय पर 960 X 640 पिक्सल्स) के साथ Retina Display का नाम दिया। इस फ़ोन में 3.5 इंच की डिस्प्ले थी।

उस समय पर Apple के मार्केटिंग डिपार्टमेंट ने Retina Display नाम इसलिए चुना क्योंकि कंपनी के अनुसार एक निश्चित दूरी से हमारी या किसी भी इंसान की आंखें अलग-अलग पिक्सल में फर्क नहीं कर पाती। iPhones के केस में, ये नाम तब इस्तेमाल होता था जब फ़ोन की डिस्प्ले पर 300 ppi (pixel per inch) से ज्यादा होती थी।

तब से, अन्य स्मार्टफोन बनाने वाली कंपनियों ने भी यही तरीका अपनाया और हाई रेज़ॉल्यूशन वाले पैनलों को अपनाना शुरू कर दिया। जबकि iPhone 12 Mini में 476 dpi और Sony Xperia 1 में 643 dpi मिलती है।

जब सबने हाई रेज़ॉल्यूशन के साथ डिस्प्ले लेना आरम्भ कर दिया, फिर Apple ने खुद को भीड़ में अलग करने के लिए अपने प्रीमियम स्मार्टफोनों में इस्तेमाल होने वाली OLED डिस्प्ले को “Super Retina” का नाम दे दिया। ये डिस्प्ले iPhone X और उसके बाद आने वाले फोनों में आयी है। ये डिस्प्ले हाई कॉन्ट्रास्ट रेट और डिस्प्ले पर रंगों की सटीकता के लिए जानी जाती है, और ऐसी ही स्क्रीन Samsung के S-सीरीज़ के स्मार्टफोनों में भी आप देख सकते हैं।

इसके बाद कंपनी ने iPhone 11 Pro के साथ डिस्प्ले का नया नाम भी लॉन्च किया – “Super Retina XDR”। इसमें भी वही OLED पैनल का उपयोग किया गया है, लेकिन इसे पैनल का निर्माण Samsung Display या LG Display द्वारा हुआ है। इसमें आपको 2,000,000:1 रेश्यो के साथ और भी बेहतर कॉन्ट्रास्ट लेवल और 1200 nits की ब्राइटनेस मिलते हैं और ये ख़ासकर HDR कंटेंट के लिए अनुकूल हैं।

वहीं iPhone XR और iPhone 11 के ग्राहकों को भी खुश रखने के लिए कंपनी ने इनमें आने वाले LCD पैनल को “Liquid Retina” का नाम दे दिया। बाद में यही डिस्प्ले कंपनी स्टैण्डर्ड के अनुसार बेहतर रेज़ॉल्यूशन और सही रंगों के साथ iPad Pro और iPad Air मॉडल में भी आया।

अंतरराष्ट्रीय प्रणाली या सिस्टम में Nit या कैंडेला प्रति वर्ग मीटर (candela per square meter), जलने या निकलने वाली रौशनी की तीव्रता या गहनता (intensity) को मापने की यूनिट है। अधिकतर स्मार्टफोन, टैबलेट, मॉनिटर के बारे में जब हम बात करते हैं तो ये यूनिट बताती है कि डिस्प्ले कितना ब्राइट है। इसकी वैल्यू जितनी ज्यादा होगा, डिस्प्ले पर पिछले से पड़ने वाली रौशनी की तीव्रता भी उतनी ही ज्यादा होगी।

टेलीविज़न की दुनिया में, miniLED के बारे में हम जान चुके हैं और ये फ़ीचर या तकनीक टीवी में हम देखते ही आ रहे हैं। इसमें बैकलाइट में लाइटिंग ज़ोन का नंबर बढ़ा दिया जाता है। लेकिन अब अफवाहों और कई ख़बरों के अनुसार स्मार्टफोनों और स्मार्टवॉच में भी कंपनियां microLED टेक्नोलॉजी जल्दी ही लेकर आ सकती हैं। ये टेक्नोलॉजी या पैनल LCD/LED से काफी अलग है क्योंकि ये OLED डिस्प्ले की तरह ही बारीकियों के साथ अच्छी पिक्चर क्वॉलिटी देती है।

microLED डिस्प्ले में हर एक सब-पिक्सल में एक अलग रौशनी देने वाला डायोड होता है – अधिकतर ये एक लाल, हरे और नीले डायोड का एक सेट होता है जो एक डॉट के लिए होता है । माना जा रहा है कि microLED में इस बार किसी तरह की अजैविक (inorganic) मैटेरियल का इस्तेमाल होगा जैसे कि gallium nitride (GaN)।

खुद अपनी रौशनी छोड़ने वाला पिक्सल यानि कि self-emitting light जैसी तकनीक अपनाने के साथ, microLED डिस्प्ले में भी बैकलाइट की ज़रूरत नहीं होती। इसमें भी आपको OLED जैसे ही हाई कॉन्ट्रास्ट के साथ पिक्चर देखने को मिलेंगी और साथ ही इसमें ऑर्गेनिक डायोड की तरह स्क्रीन बर्न-इन जैसी समस्याओं का डर भी नहीं है।

साथ ही दूसरी चुनौती ये है कि इनकी कीमत भी काफी ज्यादा होती है। उदाहरण के लिए – Samsung की microLED TVs (146 इंच से 292 इंच) की कीमत 3.5 करोड़ से 12 करोड़ है, जो कि बहुत ही ज़्यादा है।

जैसे कि हमने पहले भी कहा, OLED या AMOLED डिस्प्ले में सबसे बड़ा फ़ायदा है कि हर पिक्सल खुद को रौशनी देने का कार्य संभालता है और इससे कंट्रास्ट लेवल बढ़ता है। साथ ही दूसरा फ़ायदा है ज़्यादा और सटीक काला रंग, जो कि डिस्प्ले पर देखते समय अच्छी पिक्चर क्वालिटी के लिए बेहद महत्वपूर्ण है। साथ ही जिस समय स्क्रीन कोई गहरे (डार्क) रंग की तस्वीर दिखाती है तो ये ये ऊर्जा भी कम लेते हैं।

वहीँ इनकी ख़ामियों की बात करें तो, इनको बनाने में काफी ज़्यादा लागत लगती है और कॉम्पोनेन्ट की पूर्ती करने वाली कंपनियां भी सीमित ही हैं। इनमें Samsung Display, LG Display और तीसरे नंबर पर चीन की इलेक्ट्रॉनिक्स कंपनी BOE और कुछ एक जो OLED की मांग को पूरा करते हैं। जबकि LCD पैनल बनाने वाली काफी कम्पनियां हैं।

इसके अलावा एक और बात जो हम यहां जोड़ना चाहते हैं, समय के साथ OLED स्क्रीन के ऑर्गेनिक डायोड अपनी चमक या कहें कि योग्यता खो देते हैं और ये तब होता है जब एक ही तस्वीर ज्यादा समय तक डिस्प्ले होती है। इसे कपनियां “burn-in” का नाम देती हैं।

Over time, the purpose of using mobile phones or Smartphones has changed. Comparatively, it has now become a basic necessity of every individual. Smartphone has dramatically transformed the lives of individuals. It has now become a mini-computer that everyone carries in their pocket. Instead, you can have multiple things at your fingertips in a few seconds. While there are plenty of things to look for, AMOLED vs OLED is also a part of it.

Before purchasing any Smartphone, everyone goes through a list of specifications. This list includes display type, screen size, battery backup, supported operating system, total internal memory, and many others. Today, we have brought a comprehensive study of the significant display technologies available nowadays.

This article will introduce you to AMOLED vs OLED display technologies. Then, we will discuss the properties of both display technologies, followed by the difference between AMOLED vs OLED.

It stands for Natural Light-Emitting Diode, a type of LED technique that utilises LEDs wherein the light is of organic molecules that cause the LEDs to shine brighter. These organic LEDs are in use to make what are thought to be the best display panels in the world.

When you make an OLED display, you put organic films among two conductors to make them. As a result, a bright light comes out when electricity is used—a simple design with many advantages over other ways to show things.

OLEDs can be used to make emissive displays, which implies that each pixel can be controlled and emits its very own light. As a result, OLED displays have excellent picture quality. They have bright colours, fast motion, and most importantly, very high contrast. Most of all, “real” blacks are the most important.  The simple design of OLEDs also makes it easy to create flexible displays that can bend and move.

PMOLED stands for Passive Matrix Organic Light Emitting Diode. The PMOLEDs are easy to find and much cheaper than other LEDs, but they cannot work for a long duration as their lifespan is very short. Therefore, this type of display is generally for small devices up to 3 inches.

AMOLED stands for Active Matrix Organic Light Emitting Diode. This type of display is generally for large platforms. It contains TFT, which further consists of a storage capacitor. It also works on the same principle as OLED displays.

AMOLED offers no restriction on the size of the display. The power consumption of AMOLED is much less than other display technologies. The AMOLED provides incredible performance. It is thinner, lighter, and more flexible than any other display technology like LED, or LCD technology.

The AMOLED display is widely used in mobiles, laptops, and televisions as it offers excellent performance. Therefore, SAMSUNG has introduced AMOLED displays in almost every product. For example, Full HD Super AMOLED in Samsung Galaxy S4 and Samsung Galaxy Note 3, Super AMOLED in Samsung Galaxy S3, HD Super AMOLED in Samsung Galaxy Note, and HD Super AMOLED Plus in Samsung Galaxy S3. Apart from this, it is also used in AMOLED vs OLED creating the following:

So far, we have discussed OLED and AMOLED display technologies. Now, we will look at some of the differences between OLED and AMOLED display technology:

OLED comprises thin layers of the organic component, which emits light when the current passes through it. In this technology, each pixel transmits its own light. On the other side, AMOLED consists of an additional layer of thin-film transistors (TFTs). In AMOLED, the storage capacitors are used to maintain the pixel states.

While the technology is different among various manufacturers, Samsung’s edge AMOLED displays use plastic substrates with poly-Si TFT technology similar to how LG uses it in their POLED technology. This technology is what makes the possibility to build curved displays using an active-matrix OLED panel.

OLED display much deeper blacks as compared to the AMOLED displays. You cannot see the screen in AMOLED display under direct sunlight. The AMOLED display quality is much better than the OLEDs as it contains an additional layer of TFTs and follows backplane technologies.

The OLED devices are simple solid-state devices consisting of a thin layer of organic compounds in an emissive electroluminescent layer where the electricity generates.

These organic compounds are present between the protective layers of glass or plastic. Comparatively, AMOLED comprises an active matrix of OLED pixels along with an additional layer of TFTs. This extra layer is responsible for controlling the current flow in each pixel.

The OLED display offers a high level of control over pixels. Hence, it can be turned off completely, resulting in an excellent contrast ratio compared to the AMOLED displays and less power consumption. On the other side, AMOLED has faster refresh rates than OLEDs. Also, they offer a tremendous artificial contrast ratio as each pixel transmits light but consumes more power than OLEDs.

OLED displays are comparatively much thinner compared to the LCDs. Hence, it provides more efficient and bright presentations. In addition, OLED offers support for large display sizes compared to the traditional LCDs. AMOLEDs remove the limitation of display sizes. one can fit it into any display size.

Putting all the points mentioned above in view, the key difference to understand appropriately is that POLED is an OLED display with a plastic substrate. On the other hand, AMOLED is Samsung’s word for its display technology which is mainly for marketing. Therefore, most phone manufacturers having AMOLED displays mean that they are using Samsung displays. It is as simple as that. To add to that, all the curved display technology is made possible because of the usage of plastic substrate.

So, based on the points mentioned above, the difference between OLED and AMOLED displays, you can choose any of the two display technology at your convenience. Both are good, offer excellent performance, and are customised according to your requirements.

The AMOLED display has a higher quality than OLEDs since it has an additional layer of TTs and uses backplane technologies. When compared to OLED screens, AMOLED displays are far more flexible. As a result, they are substantially more expensive than an OLED display.

Window to the digital world, the display is one of the first seen features when selecting a smartphone, so a show must be good, and an AMOLED display offers the same. Offering a great viewing experience, here are the top 3 AMOLED screen smartphones available in the market right now:

Realme 8 Pro features a 6.4-inch Super AMOLED display with 411 PPI and a 2.5D curved display. It runs on Snapdragon 720G, bundled with Adreno 618 and 6GB of RAM. On the rear, the Realme 8 Pro has a quad-camera setup with 108-megapixels primary sensor, 8-megapixel ultra-wide angle sensor, 2-megapixel macro sensor, and a 2-megapixel monochrome sensor.

Coming to the front, it has a 16-megapixel selfie camera housed in the punch-hole display. It comes with a 4,500 mAh battery that supports Super Dart fast charging, with 100 per cent coming in just 47 min. The Realme 8 Pro is one of the best segments with a Super AMOLED FHD+ display. Media lovers will enjoy this phone with its deep blacks and vibrant colours.

The Xiaomi Mi 11 Lite runs on Snapdragon 732G chipset bundled with Adreno 618 GPU and up to 8GB RAM. The display front comes with a 6.55-inch AMOLED display with HDR 10+ support and 402 PPI.

The cameras have a triple rear camera setup with a 64-megapixel primary sensor, 8-megapixel ultra-wide angle sensor, and a 5-megapixel macro sensor. In addition, it has a 16-megapixel selfie camera housed in the punch-hole display on the front. It has a 4,250 mAh battery with 33W fast charging with USB Type-C. With the support for HDR 10+, the AMOLED display on the Mi 11 Lite is a treat for all media enthusiasts.

OPPO has recently launched the Oppo Reno 6 Pro with MediaTek’s Density 1200 chipset coupled with Mali-G77 MC9 GPU and up to 12GB of RAM. In addition, it comes with a 6.55-inch curved AMOLED FHD+ display with support for HDR 10+ and an Oleophobic coating.

On the rear, it comes with a quad-camera setup with a 64-megapixel primary sensor, an 8MP ultra-wide angle sensor, a 2-megapixel macro sensor, and a 2-megapixel depth sensor. In addition, it has a 32-megapixel selfie camera integrated inside the punch-hole on display on the front. It comes with a 4,500 mAh battery that supports 65W Super VOOC fast charging and can charge the phone 100 per cent in just 31 minutes. Since it comes with an FHD+ curved AMOLED display on the display front, it is a treat for gamers and media consumption lovers.

Smartphone displays have advanced significantly in recent years, more so than most people realise in this technological age. Display screens are similar to windows in the mobile world, which has seen a tremendous transformation in innovative products in the last several years. People have gotten more selective when buying a phone in recent years, and although all of the functions are important, the display is always the most noticeable.

Major smartphone manufacturers attempt to provide their consumers with the most delicate devices possible that incorporate the most up-to-date technologies. In AMOLED vs OLED, AMOLED is a type of OLED and a more prominent example of both OLED and POLED, so there’s no debate about which is superior.

Click here if you’re looking tosell phone online, or want torecycle old phones, and Cashify will help you get the process completed right at your doorstep.

AMOLED and TFT are two types of display technology used in smartphones. AMOLED (active-matrix organic light-emitting diode) displays are made up of tiny organic light-emitting diodes, while TFT (Thin-Film Transistor) displays use inorganic thin-film transistors.

AMOLEDs are made from organic materials that emit light when an electric current is passed through them, while TFTs use a matrix of tiny transistors to control the flow of electricity to the display.

Refresh Rate: Another key difference between AMOLED and TFT displays is the refresh rate. The refresh rate is how often the image on the screen is updated. AMOLED screens have a higher refresh rate than TFT screens, which means that they can display images more quickly and smoothly.

Response Time: The response time is how long it takes for the pixels to change from one colour to another. AMOLED screens have a shorter response time than TFT screens..

Colour Accuracy/Display Quality: AMOLED screens are more accurate when it comes to displaying colours. This is because each pixel on an AMOLED screen emits its own light, which means that the colours are more pure and true to life. TFT screens, on the other hand, use a backlight to illuminate the pixels, which can cause the colours to appear washed out or less vibrant.

Viewing Angle: The viewing angle is the angle at which you can see the screen. AMOLED screens have a wider viewing angle than TFT screens, which means that you can see the screen from more angles without the colours looking distorted.

Power Consumption: One of the main advantages of AMOLED displays is that they consume less power than TFT displays. This is because the pixels on an AMOLED screen only light up when they need to, while the pixels on a TFT screen are always illuminated by the backlight.

Production Cost: AMOLED screens are more expensive to produce than TFT screens. This is because the manufacturing process for AMOLED screens is more complex, and the materials used are more expensive.

Availability: TFT screens are more widely available than AMOLED screens and have been around for longer. They are typically used in a variety of devices, ranging from phones to TVs.

Usage: AMOLED screens are typically used in devices where power consumption is a concern, such as phones and wearable devices. TFT screens are more commonly used in devices where image quality is a higher priority, such as TVs and monitors.

AMOLED and TFT are two different types of display technology. AMOLED displays are typically brighter and more vibrant, but they are more expensive to produce. TFT displays are cheaper to produce, but they are not as bright or power efficient as AMOLED displays.

The display technology that is best for you will depend on your needs and preferences. If you need a screen that is bright and vibrant, then an AMOLED display is a good choice. If you need a screen that is cheaper to produce, then a TFT display is a good choice. However, if you’re worried about image retention, then TFT may be a better option.

Nauticomp Inc.provides world-class fully customizable touchscreen displays for commercial and industrial settings. With features like sunlight readability, brightness adjustability, infrared lighting, full backlighting, all-weather capabilities, etc., our displays are second to none. Contact us today to learn more.

Glass substrate with ITO electrodes. The shapes of these electrodes will determine the shapes that will appear when the LCD is switched ON. Vertical ridges etched on the surface are smooth.

A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directlybacklight or reflector to produce images in color or monochrome.seven-segment displays, as in a digital clock, are all good examples of devices with these displays. They use the same basic technology, except that arbitrary images are made from a matrix of small pixels, while other displays have larger elements. LCDs can either be normally on (positive) or off (negative), depending on the polarizer arrangement. For example, a character positive LCD with a backlight will have black lettering on a background that is the color of the backlight, and a character negative LCD will have a black background with the letters being of the same color as the backlight. Optical filters are added to white on blue LCDs to give them their characteristic appearance.

LCDs are used in a wide range of applications, including LCD televisions, computer monitors, instrument panels, aircraft cockpit displays, and indoor and outdoor signage. Small LCD screens are common in LCD projectors and portable consumer devices such as digital cameras, watches, digital clocks, calculators, and mobile telephones, including smartphones. LCD screens are also used on consumer electronics products such as DVD players, video game devices and clocks. LCD screens have replaced heavy, bulky cathode-ray tube (CRT) displays in nearly all applications. LCD screens are available in a wider range of screen sizes than CRT and plasma displays, with LCD screens available in sizes ranging from tiny digital watches to very large television receivers. LCDs are slowly being replaced by OLEDs, which can be easily made into different shapes, and have a lower response time, wider color gamut, virtually infinite color contrast and viewing angles, lower weight for a given display size and a slimmer profile (because OLEDs use a single glass or plastic panel whereas LCDs use two glass panels; the thickness of the panels increases with size but the increase is more noticeable on LCDs) and potentially lower power consumption (as the display is only "on" where needed and there is no backlight). OLEDs, however, are more expensive for a given display size due to the very expensive electroluminescent materials or phosphors that they use. Also due to the use of phosphors, OLEDs suffer from screen burn-in and there is currently no way to recycle OLED displays, whereas LCD panels can be recycled, although the technology required to recycle LCDs is not yet widespread. Attempts to maintain the competitiveness of LCDs are quantum dot displays, marketed as SUHD, QLED or Triluminos, which are displays with blue LED backlighting and a Quantum-dot enhancement film (QDEF) that converts part of the blue light into red and green, offering similar performance to an OLED display at a lower price, but the quantum dot layer that gives these displays their characteristics can not yet be recycled.

Since LCD screens do not use phosphors, they rarely suffer image burn-in when a static image is displayed on a screen for a long time, e.g., the table frame for an airline flight schedule on an indoor sign. LCDs are, however, susceptible to image persistence.battery-powered electronic equipment more efficiently than a CRT can be. By 2008, annual sales of televisions with LCD screens exceeded sales of CRT units worldwide, and the CRT became obsolete for most purposes.

Each pixel of an LCD typically consists of a layer of molecules aligned between two transparent electrodes, often made of Indium-Tin oxide (ITO) and two polarizing filters (parallel and perpendicular polarizers), the axes of transmission of which are (in most of the cases) perpendicular to each other. Without the liquid crystal between the polarizing filters, light passing through the first filter would be blocked by the second (crossed) polarizer. Before an electric field is applied, the orientation of the liquid-crystal molecules is determined by the alignment at the surfaces of electrodes. In a twisted nematic (TN) device, the surface alignment directions at the two electrodes are perpendicular to each other, and so the molecules arrange themselves in a helical structure, or twist. This induces the rotation of the polarization of the incident light, and the device appears gray. If the applied voltage is large enough, the liquid crystal molecules in the center of the layer are almost completely untwisted and the polarization of the incident light is not rotated as it passes through the liquid crystal layer. This light will then be mainly polarized perpendicular to the second filter, and thus be blocked and the pixel will appear black. By controlling the voltage applied across the liquid crystal layer in each pixel, light can be allowed to pass through in varying amounts thus constituting different levels of gray.

The chemical formula of the liquid crystals used in LCDs may vary. Formulas may be patented.Sharp Corporation. The patent that covered that specific mixture expired.

Most color LCD systems use the same technique, with color filters used to generate red, green, and blue subpixels. The LCD color filters are made with a photolithography process on large glass sheets that are later glued with other glass sheets containing a TFT array, spacers and liquid crystal, creating several color LCDs that are then cut from one another and laminated with polarizer sheets. Red, green, blue and black photoresists (resists) are used. All resists contain a finely ground powdered pigment, with particles being just 40 nanometers across. The black resist is the first to be applied; this will create a black grid (known in the industry as a black matrix) that will separate red, green and blue subpixels from one another, increasing contrast ratios and preventing light from leaking from one subpixel onto other surrounding subpixels.Super-twisted nematic LCD, where the variable twist between tighter-spaced plates causes a varying double refraction birefringence, thus changing the hue.

LCD in a Texas Instruments calculator with top polarizer removed from device and placed on top, such that the top and bottom polarizers are perpendicular. As a result, the colors are inverted.

The optical effect of a TN device in the voltage-on state is far less dependent on variations in the device thickness than that in the voltage-off state. Because of this, TN displays with low information content and no backlighting are usually operated between crossed polarizers such that they appear bright with no voltage (the eye is much more sensitive to variations in the dark state than the bright state). As most of 2010-era LCDs are used in television sets, monitors and smartphones, they have high-resolution matrix arrays of pixels to display arbitrary images using backlighting with a dark background. When no image is displayed, different arrangements are used. For this purpose, TN LCDs are operated between parallel polarizers, whereas IPS LCDs feature crossed polarizers. In many applications IPS LCDs have replaced TN LCDs, particularly in smartphones. Both the liquid crystal material and the alignment layer material contain ionic compounds. If an electric field of one particular polarity is applied for a long period of time, this ionic material is attracted to the surfaces and degrades the device performance. This is avoided either by applying an alternating current or by reversing the polarity of the electric field as the device is addressed (the response of the liquid crystal layer is identical, regardless of the polarity of the applied field).

Displays for a small number of individual digits or fixed symbols (as in digital watches and pocket calculators) can be implemented with independent electrodes for each segment.alphanumeric or variable graphics displays are usually implemented with pixels arranged as a matrix consisting of electrically connected rows on one side of the LC layer and columns on the other side, which makes it possible to address each pixel at the intersections. The general method of matrix addressing consists of sequentially addressing one side of the matrix, for example by selecting the rows one-by-one and applying the picture information on the other side at the columns row-by-row. For details on the various matrix addressing schemes see passive-matrix and active-matrix addressed LCDs.

LCDs, along with OLED displays, are manufactured in cleanrooms borrowing techniques from semiconductor manufacturing and using large sheets of glass whose size has increased over time. Several displays are manufactured at the same time, and then cut from the sheet of glass, also known as the mother glass or LCD glass substrate. The increase in size allows more displays or larger displays to be made, just like with increasing wafer sizes in semiconductor manufacturing. The glass sizes are as follows:

Until Gen 8, manufacturers would not agree on a single mother glass size and as a result, different manufacturers would use slightly different glass sizes for the same generation. Some manufacturers have adopted Gen 8.6 mother glass sheets which are only slightly larger than Gen 8.5, allowing for more 50 and 58 inch LCDs to be made per mother glass, specially 58 inch LCDs, in which case 6 can be produced on a Gen 8.6 mother glass vs only 3 on a Gen 8.5 mother glass, significantly reducing waste.AGC Inc., Corning Inc., and Nippon Electric Glass.

The origins and the complex history of liquid-crystal displays from the perspective of an insider during the early days were described by Joseph A. Castellano in Liquid Gold: The Story of Liquid Crystal Displays and the Creation of an Industry.IEEE History Center.Peter J. Wild, can be found at the Engineering and Technology History Wiki.

In 1888,Friedrich Reinitzer (1858–1927) discovered the liquid crystalline nature of cholesterol extracted from carrots (that is, two melting points and generation of colors) and published his findings at a meeting of the Vienna Chemical Society on May 3, 1888 (F. Reinitzer: Beiträge zur Kenntniss des Cholesterins, Monatshefte für Chemie (Wien) 9, 421–441 (1888)).Otto Lehmann published his work "Flüssige Kristalle" (Liquid Crystals). In 1911, Charles Mauguin first experimented with liquid crystals confined between plates in thin layers.

In 1922, Georges Friedel described the structure and properties of liquid crystals and classified them in three types (nematics, smectics and cholesterics). In 1927, Vsevolod Frederiks devised the electrically switched light valve, called the Fréedericksz transition, the essential effect of all LCD technology. In 1936, the Marconi Wireless Telegraph company patented the first practical application of the technology, "The Liquid Crystal Light Valve". In 1962, the first major English language publication Molecular Structure and Properties of Liquid Crystals was published by Dr. George W. Gray.RCA found that liquid crystals had some interesting electro-optic characteristics and he realized an electro-optical effect by generating stripe-patterns in a thin layer of liquid crystal material by the application of a voltage. This effect is based on an electro-hydrodynamic instability forming what are now called "Williams domains" inside the liquid crystal.

The MOSFET (metal-oxide-semiconductor field-effect transistor) was invented by Mohamed M. Atalla and Dawon Kahng at Bell Labs in 1959, and presented in 1960.Paul K. Weimer at RCA developed the thin-film transistor (TFT) in 1962.

In 1964, George H. Heilmeier, then working at the RCA laboratories on the effect discovered by Williams achieved the switching of colors by field-induced realignment of dichroic dyes in a homeotropically oriented liquid crystal. Practical problems with this new electro-optical effect made Heilmeier continue to work on scattering effects in liquid crystals and finally the achievement of the first operational liquid-crystal display based on what he called the George H. Heilmeier was inducted in the National Inventors Hall of FameIEEE Milestone.

In the late 1960s, pioneering work on liquid crystals was undertaken by the UK"s Royal Radar Establishment at Malvern, England. The team at RRE supported ongoing work by George William Gray and his team at the University of Hull who ultimately discovered the cyanobiphenyl liquid crystals, which had correct stability and temperature properties for application in LCDs.

The idea of a TFT-based liquid-crystal display (LCD) was conceived by Bernard Lechner of RCA Laboratories in 1968.dynamic scattering mode (DSM) LCD that used standard discrete MOSFETs.

On December 4, 1970, the twisted nematic field effect (TN) in liquid crystals was filed for patent by Hoffmann-LaRoche in Switzerland, (Swiss patent No. 532 261) with Wolfgang Helfrich and Martin Schadt (then working for the Central Research Laboratories) listed as inventors.Brown, Boveri & Cie, its joint venture partner at that time, which produced TN displays for wristwatches and other applications during the 1970s for the international markets including the Japanese electronics industry, which soon produced the first digital quartz wristwatches with TN-LCDs and numerous other products. James Fergason, while working with Sardari Arora and Alfred Saupe at Kent State University Liquid Crystal Institute, filed an identical patent in the United States on April 22, 1971.ILIXCO (now LXD Incorporated), produced LCDs based on the TN-effect, which soon superseded the poor-quality DSM types due to improvements of lower operating voltages and lower power consumption. Tetsuro Hama and Izuhiko Nishimura of Seiko received a US patent dated February 1971, for an electronic wristwatch incorporating a TN-LCD.

In 1972, the concept of the active-matrix thin-film transistor (TFT) liquid-c