ph sensor arduino with lcd display brands

pH scale is used to measure the acidity and basicity of a liquid. It can have readings ranging from 1-14 where 1 shows the most acidic liquid and 14 shows the most basic liquid. 7 pH is for neutral substances that are neither acidic nor basic. Now, pH plays a very important role in our lives and it is used in various applications. For example, it can be used in a swimming pool to check the quality of water. Similarly, pH measurement is used in a wide variety of applications like agriculture, wastewater treatment, industries, environmental monitoring, etc.

In this project, we are going to make an Arduino pH Meter and learn how to measure the pH of a liquid solution using a gravity pH sensor and Arduino. A 16x2 LCD is used to show the pH value on the screen. We will also learn how to calibrate the pH sensor to determine the accuracy of the sensor. So let’s get started!

The unit that we use to measure the acidity of a substance is called pH. The term “H” is defined as the negative log of the hydrogen ion concentration. The range of pH can have values from 0 to 14. A pH value of 7 is neutral, as pure water has a pH value of exactly 7. Values lower than 7 are acidic and values greater than 7 are basic or alkaline.

Analog pH sensor is designed to measure the pH value of a solution and show the acidity or alkalinity of the substance. It is commonly used in various applications such as agriculture, wastewater treatment, industries, environmental monitoring, etc. The module has an on-board voltage regulator chip which supports the wide voltage supply of 3.3-5.5V DC, which is compatible with 5V and 3.3V of any control board like Arduino. The output signal is being filtered by hardware low jitter.

The construction of a pH sensor is shown above. The pH Sensor looks like a rod usually made of a glass material having a tip called “Glass membrane”. This membrane is filled with a buffer solution of known pH (typically pH = 7). This electrode design ensures an environment with the constant binding of H+ ions on the inside of the glass membrane. When the probe is dipped into the solution to be tested, hydrogen ions in the test solution start exchanging with other positively charged ions on the glass membrane, which creates an electrochemical potential across the membrane which is fed to the electronic amplifier module which measures the potential between both electrodes and converts it to pH units. The difference between these potentials determines the pH value based on the Nernst equation.

The Nernst equation gives a relation between the cell potential of an electrochemical cell, temperature, reaction quotient and the standard cell potential. In non-standard conditions, the Nernst equation is used to calculate cell potentials in an electrochemical cell. The Nernst equation can also be used to calculate the total electromotive force (EMF) for a full electrochemical cell. This equation is used to calculate the PH value of a solution as well. The glass electrode response is governed by the Nernst Equation can be given as:

After successful hardware connections, now it’s time for programming the Arduino. The complete code for this pH meter with Arduino is given at the bottom part of this tutorial. The stepwise explanation of the project is given below.

The first thing to do in the program is to include all the required libraries. Here in my case, I have included “LiquidCrystal_I2C.h” library for using the I2C interface of an LCD display and “Wire.h” for using I2C functionality on Arduino.

Next, the calibration value is defined, which can be modified as required to get an accurate pH value of solutions. (This is explained later in the article)

Finally, calculate the average of a 6 centre sample Analog values. Then this average value is converted into actual pH value and printed on an LCD display.

Calibration of the PH electrode is very important in this project. For this, we need to have a solution whose value is known to us. This can be taken as the reference solution for the calibration of the sensor.

Suppose, we have a solution whose PH value is 7 (distilled water). Now when the electrode is dipped in the reference solution and the PH value displayed on LCD is 6.5. Then to calibrate it, just add 7-6.5=0.5 in the calibration variable “calibration_value” in the code. i.e. make the value 21.34 + 0.5=21.84. After making these changes, again upload the code to Arduino and recheck the pH by dipping electrode in the reference solution. Now LCD should show the correct pH value i.e. 7(Little variations are considerable).Similarly, adjust this variable to calibrate the sensor. Then check for all other solutions to get the exact output.

In this project, we will be making a benchtop pH meter using the Gravity analog pH circuit and probe from Atlas Scientific and an Arduino Uno. Readings will be displayed on a liquid crystal display (LCD).

c)Use this pilot hole as the start point for the 3.2mm (1/8") drywall cutting bit. Since this a small job, we will use the bit on the hand drill rather than a drywall cutting machine. Work on the inside of the rectangle instead of the lines as it may be a bit difficult to cut in a straight manner with this bit on the drill.

b)Put the piece in the vice and cut the openings. The circular opening is made using drill bits. The rectangular ones are made by following a similar process used to make the opening for the LCD.

e)Solder the header pins to the LCD (pins provided). Insert LCD into the top portion of the housing and use some hot glue to keep the screen in place.

The code for this project makes use of customized libraries and header files. You will have to add them to your Arduino IDE to use the code. The steps below include the process of making this addition to the IDE.

a)Connect the Arduino to your computer and open the IDE. The IDE can be downloaded from thisLINKif you do not have it. Go to Tools -> Board -> Select Arduino/Genuino Uno. Go toTools -> Port -> select the portwhere the Arduino is connected to.

b)Add Liquid Crystal Display library: In the IDE go toSketch -> Include library -> Manage libraries. In the search bar of the Library Manager enter "liquidcrystal". Look for the package titled "LiquidCrystal Built-in by Arduino, Adafruit". It may or may not be installed. If not, select the package and click oninstall.

c)Add Atlas Gravity sensor library: Download the zip file from the followingLINK.The file will be saved as "Atlas_gravity.zip". In the IDE go toSketch -> Include library -> Add.ZIP Library. Locate the "Atlas_gravity.zip" file and select to add.

f)The pH readings will then be displayed on the LCD. You can also view the readings on the serial monitor. To open the serial monitor, go toTools -> Serial Monitoror pressCtrl+Shift+Mon your keyboard. Set the baud rate to 9600 and select "Carriage return".

Note: If you plan on using an external power supply for the Arduino, connect it to the Arduino before doing the calibration. This will ensure that the reference levels are appropriately set, which will aid in the correct calibration.

The sensor used in this project has an accuracy of +/- 0.2%. The pH meter will operate within this accuracy in the temperature range of 7 - 46°C. Outside of this range, the meter will have to be modified for temp compensation. Note: The pH probe can be subjected to a range of 1 − 60 °C.

• Arduino Uno houses ATmega328 microcontroller from ATMEL. This microcontroller contains flash memory (32 KB), RAM (2 KB), 8 bit wide CPU and 1 KB EEPROM.

DFRobot Gravity: Analog pH meter V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. DFRobot ph sensor is commonly used in various applications such as

supports the wide voltage supply of 3.3~5.5V, which is compatible with the 5V and 3.3V main control boards. The output signal filtered by hardware has low jitter. The software library adopts the two-point calibration method,

The sensor can be easily connected to most popular microcontrollers  (such as Arduino), with its Arduino library, you can quickly build a pH meter, plug and play.

The pH is a value that measures the acidity or alkalinity of the solution. It is also called the hydrogen ion concentration index. The pH is a scale of hydrogen ion activity in the solution. The pH has a wide range of uses in medicine,

chemistry, and agriculture. Usually, the pH is a number between 0 to 14. Under the thermodynamic standard conditions, pH=7, which means the solution is neutral; pH<7, which means the solution is acidic; pH>7, which means the

3. The sensitive glass bubble in the head of the pH probe should avoid touching the hard material. Any damage or scratches will cause the electrode to fail.

4. After completing the measurement, disconnect the pH probe from the signal conversion board. The ph analog sensor probe should not be connected to the signal conversion board without the power supply for a long time.

5. The bottle cap of the probe contains protective liquid (3.3mol/L KCL). Even if the bottle cap is screwed tightly, some protective liquid may still leak around the bottle cap, forming white crystals. But as long as there is still protective liquid in the bottle cap, it will not affect the life and accuracy of the probe. So please use it with confidence. It is recommended that the white crystals be poured back into the protective liquid in the bottle cap.

We all know PH is an essential thing for drinking water. If you don’t take care of this crucial ingredient, you might ruin your entire meal in a matter of seconds. This article will teach you how to build an Arduino Ph sensor as a beginner project for someone who doesn’t know what they’re doing.

We can regard an Arduino as a ‘microcontroller.’ This means that it is a tiny computer that you can use for electronic projects (and for much more). It can act as the main component in a huge amount of projects. By combining multiple projects, you can make something even greater.

Before you get started, make sure you set up the Arduino kit by following the instructions that came with it. This takes approximately 1 hour and 30 minutes to do. However, if you’re in a hurry, it’s possible to do this in 20 minutes by following this tutorial.

Every solution has a pH that a simple electrode can measure. For example, lemon juice has a pH of 2-3, and vinegar has a pH range from 4-6. Clean water may have a pH between 6.5 and 8, depending on the area you live.

A probe is an electronic device that allows you to measure the amount of voltage or current flowing through a circuit. For example, we will be using a Ph probe when measuring PH. This sensor lets us know if the water contains acids or bases.

The PH probe has two wires: one red and one black. The blue wire connects to 5V, and the black wire connects to the Ground(GND). The Red wire is what you use to measure the PH. It’s a very sensitive probe that can measure the pH value. You connect it to the Arduino, and in a concise period, it will tell you if the solution has an acidic or basic value.

There are many different models of Ph Sensor for Arduino. Unfortunately, many of them appear similar. But, if you want to do a good job and make sure your sensor will last for a long time, you should go with one from Rayming PCB & Assembly and get this one.

You can connect the sensor to the Arduino board using two wires. Once the connection is complete, you can start testing the sensor. You should do this by using a small piece of bread. The amount of sugar in bread is close to human skin, so it is easy to see how the sensor will react.

One can adjust the Ph probe to any other values as well. You need to tell it which value you want, and it will give it back to you (the value). You can do this by using a simple piece of bread.

Testing the sensor after connecting it to the Arduino is essential before using other solutions. You should always let the sensor rest for around 24 hours to stabilize and work properly. You will have to do this again when you connect it to a new circuit later.

The Ph probe requires between 3.5V and 5V to read the solution’s pH value properly. Therefore, to monitor the pH level of your Arduino project, you will need to use a voltage regulator or a voltage divider.

This project will use two transistors and two resistors to get the proper readings from different circuits or sensors. For example, if you want to measure the temperature on your Arduino board, you can get that information with a thermistor. However, the readings for both temperatures and pH depend on the circuit’s current level and, therefore, on the value used in your soil ph sensor Arduino.

Before you start building your sensor, make sure to read these instructions carefully. Your project will not be waterproof. Ensure that you place the device on a flat, safe surface.

Other than that, almost everything is as simple as a ‘Plug and Play’ installation. If anything fails to work correctly, try restarting the Arduino IDE. If it still doesn’t work, check all the connections again to ensure there aren’t any loose wires touching other components or parts of the circuit.

You can choose to make the Arduino board a stand-alone device so that you don’t need an enclosure. But, we think it’s better to use an enclosure because it gives you a safer way to store your sensor or Arduino board in the future. But, of course, you could also use the box that comes with your Arduino kit.

Place your finished product on top of another piece of acrylic sheet or plexiglass that is slightly larger than your enclosure. Then, cut it to the same size as a saw. Once you finish both pieces, drill two holes for the mobile phone camera and one for the micro SD card slot.

Don’t worry if you mess up while making these holes. You can always take your enclosure apart and fix all these problems. Do this by using a drill bit that is slightly smaller than your cord and then cut all of these holes with a rotary tool, or you can use a saw if you want to make smoother cuts.

1) First, we will install the 220-ohm resistor from the LCD module side so that you can use an external power source. You also want to connect this to your Arduino board’s positive (red) side.

4) You will also have to add an extra ground wire between the transistors and the breadboard since they don’t share a common ground with the Arduino board. Finally, connect the transistor and resistor to GND on the Arduino board.

The Ph probe should be installed like the picture above to connect the wires to your Arduino board. The GND wire should be connected to one of the Arduino’s pins and should go in between both transistors to be grounded.

Finally, you can install the LCD module using two wires. You need to connect one pin to the Arduino board and the other to the transistor that shares a ground with the Arduino. You can use a breadboard for this if you want, but it is much easier just by connecting both circuits directly.

Just connect the parts that are highlighted in green using jumper wires. You can bend the wires to make them fit in between the housing and your Arduino board without causing any harm to them or their circuit.

Once you have your Arduino pH circuit assembled, you can now place your sensor in a safe environment to see how well it works. However, you don’t want to put it in the water yet because you haven’t installed the software to let your sensor know its pH level.

You will have to install and run the Arduino IDE on your computer. You will also have it on your mobile phone for setting up, uploading, and testing sensors in the future.

Once you have finished installing everything, open up your Arduino IDE on your computer, select ‘File/Open and select the code you downloaded from our page.

Now connect your Arduino UNO to your computer with a USB cord and then click on ‘File/Upload’ this will send the code to your sensor so that you can start testing it out.

Click ‘Tools/serial monitor’ This will open up a terminal in which you can test your sensor! Type “M50” in the terminal to heat the water at 50 degrees Celsius.

If you type “M10” in your terminal, you will notice that the temperature is now 10 degrees Celsius hotter, and the LCD screen will now say “Temp 2.0”.

You can calibrate this sensor so that it will be able to tell the exact pH level that is in your environment. For this part, you will need two common solutions in a range of 1-14 pH. In this case, we used a solution at five and another at 10.

Our solution at five pH was pink, and our solution at ten pH was purple. So we mixed these two solutions, and our sensor read “7”. Which means you calibrated the sensor at 7.

This code will turn on (red LED on) the LED connected to your LED strip (VCC) and display “Temp” on the LCD screen. You can change these values in the sketch to suit your needs!

Then connect your pH source (a five pH) to your Arduino board. Then download a sketch from here. This will let your Arduino board be able to read your pH sensor!

Notice that when you download and upload the program, the LED light will turn blue and red when it recognizes that the sensor and Arduino need a connection.

It is essential to test the pH sensor in different environments to ensure that it will perform well. In this part, I will show you how we tested out the pH sensor in a few different environments. This would allow you to know that the sensor is doing what it is supposed to do.

We tested the pH sensor in an open environment. First, we used a clear jar and filled it up with distilled water so that there was no conductivity of the water, and we stirred for about 30 seconds. Next, we put a piece of pH paper on top of the solution and connected an Arduino board using a USB cable.

Then, we took the sensor apart and connected it to our lab equipment. We tested the voltage output from the sensor, compared it to a known value, and found that there was about 0.1 volts difference between both of them. We then compared the results to the pH table online and found that the readings were correct!

We used distilled water again to have no water conductivity in the jar. Next, we used a hard water solution and poured it into the jar. We then put some pH paper on top of the water and connected the other end to our Arduino board. Then we took our pH sensor apart, stripped off its casing, and put it into the hard water solution. From there, we tested both outputs from the Arduino and lab equipment.

To our surprise, both of them were about 0.02-volt difference which is acceptable for our sensor since it is an analog voltage output device. Unfortunately, we tested one previous version of the pH sensor in hard water, and it didn’t give us a reliable result, so we needed to replace it with this one since it is more precise.

We used the same setup again, but we used a saltwater solution, about 0.4 volts difference from our analog output device. Both outputs were still within an acceptable range, and we tested both of them using a previous version of the pH sensor in saltwater, and it also gave us similar results.

If your sketch is too large for the flash memory, you might get this error message, which means your sketch is too big to fit in the flash memory. To fix this problem, comment out unnecessary codes and compile and upload again. If it still doesn’t work, you can use another Arduino IDE instead of using the default one that comes with Arduino boards.

When you compile your code and upload it on your Arduino board, you might get the “Unsatisfied Link Error” message box. This means that there is a library that you need to add to the Arduino IDE before trying to compile and upload again. But, of course, you can always go to this page and download this library into your Arduino IDE to use it in your project.

This error happens when you try to upload a sketch, but nothing happens on your board. This might be because there is something wrong with the code you are trying to upload. First, try removing all the comments from your file and then re-compile it again. If that doesn’t work, you could use this other Arduino board instead.

When you upload sketches onto your Arduino board, you might get a message box telling you that “Serial port is already in use.” This might be because your IDE tried to upload on a serial port and failed because it was not connected. To fix this, try to restart your Arduino IDE by closing it and re-open the IDE.

Sometimes, when you compile your code, a Java error comes up and tells you that the Launch4j cannot run. This is because your Arduino board is not detected by your computer since there might be a problem with the serial connection between your computer and the Arduino board. Connect your Arduino board with a new USB cable to fix this problem.

This error happens when you try to connect an Arduino board to your computer, but your Arduino board doesn’t appear in the list of recognized devices. To fix this, remove the IDE, and after you reboot your computer and then re-plug it into the USB port, this should help.

Sometimes, the code you put into your Arduino IDE doesn’t work when you compile it. This might be because you need to put in the PIN before starting. To fix this problem, comment out the “Serial. begin()” line by putting a “#” at the beginning of that line and then upload the program onto your board again.

Your board may be out of sync with the Arduino IDE. If you can’t upload any sketch onto your board, try resetting and restarting it by disconnecting the power and reconnecting it to a new USB cable. This should sync it up to Arduino IDE to upload sketches onto your board.

This might be because your Arduino board is not compatible with this type of hardware. If you have an Arduino Uno that you cannot use, you might consider finding a different one.

Finally, we have finished our first pH sensor Arduino project. We started by looking at the basic parts that we will need for this project: an Arduino Uno and a pH sensor. After reading about how these sensors work, we decided to use the DS18B20, easy to find and cheap. Fortunately, most of the parts we used were available on Amazon, so there was no need to look everywhere to get what we needed.

After building our pH sensor, we tested both possible scenarios using hard and saltwater. We found that both outputs were still within an acceptable range from the common range of pH values. Both values were around seven and below eight, which means our sensor gave us a correct output.

{"id":2523731329082,"title":"3 in 1 Digital PH Tester Sunlight Soil Moisture Meter Detector Plant Garden","handle":"3-in-1-digital-ph-tester-sunlight-soil-moisture-meter-detector-plant-garden","description":"\u003cdiv\u003e\u003cstrong\u003eProduct Description:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMethod of Use: No Battery needed; simply insert the meter in the soil area you want to check and instantly get an accurate and precise reading! When measuring soil pH and humidity, left 1cm of probe to avoid destroying electrode.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMulti-function：1.Let you know when to water. You will never over\/under water your plants again with this tester. 2.Help you to control Ph level in soil, acidic or alkaline is suitable for your plants. 3.Help you to determine if plant getting adequate light.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIndoor \u0026amp; Outdoor Use: This item is a perfect tool to test the soil conditions ( Moisture\/Light\/PH) of fruits, flowers, vegetables, shrubs, etc. with high accuracy and easy operation. You can take good care of your plants.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWarm Tips: 1, Do not touch the stone or hard rock soil, if the soil is too hard and dry, easy to damage the probes. 2, Design for testing soil ONLY. 3,After using, need to clean and wipe the probes.4,measurement of moisture and pH must be viewed while the unit is in the soil,And the tester must be kept in the soil for 10 minutes or more.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e18 Month : Our time is longer than others as our quality is , unconditionally or resend with any quality problems, life time friendly customer service, ONLY offered by Marge Plus store.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFunctions: Measure soil MOISTURE, PH and LIGHT levels\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eEasy To Use( No Battery needed, Plug and read):\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStep 1: Switch moisture\/pH\/light position \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStep 2: Stick the probe into the soil about 2-4 inches \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStep 3: Adjust the position of the probe until the pointer on the dial swing slightly \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStep 4: After 10 minutes, Note moisture\/pH\/light level in the dial \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStep 5: Remove probe from soil and wipe clean after each use\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003epH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMoisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRelative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSize: 6 x 28 x 5cm [2.36 x 11 x 2\"] \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProbe length: 18cm [7.1\"] \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCopper probe diameter: 4.8mm \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlu probe diameter: 5.1mm \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDistance between probes: 1.2cm \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eColor: Green\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan\u003e\u003cstrong\u003eWarm Tips: \u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTo avoid damaging the probe, do not use in soil meter with stones and insert forcibly \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlease wipe and clean the probe after each time using. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDon"t leave the meter in the soil for a long time. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for testing soil, don"t use it to test pure water or other liquids. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe indicator will not move If the soil is too dry, please water the plant first and test again later. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesign for testing soil ONLY. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eWe"re so proud of you because you are proud of your plants! \u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePlesse feel free to contact us if you have any question or you find what you get is defect.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 3 in 1 Soil Tester\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-09-29T17:09:07+08:00","created_at":"2019-09-29T17:14:28+08:00","vendor":"diymore","type":"PH Value Detect Sensor","tags":[],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":799,"compare_at_price_min":799,"compare_at_price_max":799,"compare_at_price_varies":false,"variants":[{"id":23749886836794,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012795","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"3 in 1 Digital PH Tester Sunlight Soil Moisture Meter Detector Plant Garden","public_title":null,"options":["Default Title"],"price":1499,"weight":0,"compare_at_price":799,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_9_486.jpg?v=1588665114","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_4_126.jpg?v=1588665114","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_8_500.jpg?v=1588665114","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_1_257.jpg?v=1588665114","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_2_229.jpg?v=1588665114","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_3_774.jpg?v=1588665114","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_5_984.jpg?v=1588665114","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_6_298.jpg?v=1588665114"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_9_486.jpg?v=1588665114","options":["Title"],"media":[{"alt":"3 In 1 Digital Ph Tester Sunlight Soil Moisture Meter Detector Plant Garden Value Detect Sensor","id":6679515889735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_9_486.jpg?v=1588665114"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_9_486.jpg?v=1588665114","width":1000},{"alt":"3 In 1 Digital Ph Tester Sunlight Soil Moisture Meter Detector Plant Garden Value Detect Sensor","id":6679516741703,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_4_126.jpg?v=1588665114"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_4_126.jpg?v=1588665114","width":1000},{"alt":"3 In 1 Digital Ph Tester Sunlight Soil Moisture Meter Detector Plant Garden Value Detect Sensor","id":6679516840007,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_8_500.jpg?v=1588665114"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_8_500.jpg?v=1588665114","width":1000},{"alt":"3 In 1 Digital Ph Tester Sunlight Soil Moisture Meter Detector Plant Garden Value Detect Sensor","id":6679517397063,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_1_257.jpg?v=1588665114"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_1_257.jpg?v=1588665114","width":1000},{"alt":"3 In 1 Digital Ph Tester Sunlight Soil Moisture Meter Detector Plant Garden Value Detect Sensor","id":6679517790279,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_2_229.jpg?v=1588665114"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_2_229.jpg?v=1588665114","width":1000},{"alt":"3 In 1 Digital Ph Tester Sunlight Soil Moisture Meter Detector Plant Garden Value Detect Sensor","id":6679517921351,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_3_774.jpg?v=1588665114"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_3_774.jpg?v=1588665114","width":1000},{"alt":"3 In 1 Digital Ph Tester Sunlight Soil Moisture Meter Detector Plant Garden Value Detect Sensor","id":6679518249031,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_5_984.jpg?v=1588665114"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_5_984.jpg?v=1588665114","width":1000},{"alt":"3 In 1 Digital Ph Tester Sunlight Soil Moisture Meter Detector Plant Garden Value Detect Sensor","id":6679518543943,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_6_298.jpg?v=1588665114"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/012795_6_298.jpg?v=1588665114","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003eProduct Description:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMethod of Use: No Battery needed; simply insert the meter in the soil area you want to check and instantly get an accurate and precise reading! When measuring soil pH and humidity, left 1cm of probe to avoid destroying electrode.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMulti-function：1.Let you know when to water. You will never over\/under water your plants again with this tester. 2.Help you to control Ph level in soil, acidic or alkaline is suitable for your plants. 3.Help you to determine if plant getting adequate light.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIndoor \u0026amp; Outdoor Use: This item is a perfect tool to test the soil conditions ( Moisture\/Light\/PH) of fruits, flowers, vegetables, shrubs, etc. with high accuracy and easy operation. You can take good care of your plants.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWarm Tips: 1, Do not touch the stone or hard rock soil, if the soil is too hard and dry, easy to damage the probes. 2, Design for testing soil ONLY. 3,After using, need to clean and wipe the probes.4,measurement of moisture and pH must be viewed while the unit is in the soil,And the tester must be kept in the soil for 10 minutes or more.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e18 Month : Our time is longer than others as our quality is , unconditionally or resend with any quality problems, life time friendly customer service, ONLY offered by Marge Plus store.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFunctions: Measure soil MOISTURE, PH and LIGHT levels\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eEasy To Use( No Battery needed, Plug and read):\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStep 1: Switch moisture\/pH\/light position \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStep 2: Stick the probe into the soil about 2-4 inches \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStep 3: Adjust the position of the probe until the pointer on the dial swing slightly \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStep 4: After 10 minutes, Note moisture\/pH\/light level in the dial \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStep 5: Remove probe from soil and wipe clean after each use\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003epH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMoisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRelative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH) \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSize: 6 x 28 x 5cm [2.36 x 11 x 2\"] \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProbe length: 18cm [7.1\"] \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCopper probe diameter: 4.8mm \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlu probe diameter: 5.1mm \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDistance between probes: 1.2cm \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eColor: Green\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan\u003e\u003cstrong\u003eWarm Tips: \u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTo avoid damaging the probe, do not use in soil meter with stones and insert forcibly \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlease wipe and clean the probe after each time using. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDon"t leave the meter in the soil for a long time. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for testing soil, don"t use it to test pure water or other liquids. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe indicator will not move If the soil is too dry, please water the plant first and test again later. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesign for testing soil ONLY. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eWe"re so proud of you because you are proud of your plants! \u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePlesse feel free to contact us if you have any question or you find what you get is defect.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 3 in 1 Soil Tester\u003c\/li\u003e\n\u003c\/ul\u003e"}

In chemistry, pH is a scale used to specify how acidic or basic a water-based solution is. Acidic solutions have a lower pH, while basic solutions have a higher pH. Thus Ph sensor has the ability to determine the Ph of any solution, i.e it tells whether the substance is acidic, basic or neutral in nature. By knowing the Ph, we can monitor the water quality in Agricultural Farm and also in Fish Farming. Similarly, Ph Sensor has a wide range of applications like wastewater treatment, pharmaceuticals, chemicals & petrochemicals.

In this basic tutorial, we will learn how to interface Gravity Ph Sensor with Arduino. We will design a simple Ph Meter and display the Ph value on OLED/LCD Display. We will also learn about the construction & working of the Ph Sensor. Finally, we will learn the calibration method which will determine the correctness and accuracy of the sensor. The Ph Sensor can also be interfaced with other higher-level microcontrollers like NodeMCU ESP8266 & STM32 which I will discuss in future.

The term PH is a quantitative measure of the acidity or basicity of aqueous or other liquid solutions. The term, widely used in chemistry, biology, and agronomy, translates the values of the concentration of the hydrogen ion which ordinarily ranges between about 1 and 10−14 gram-equivalents per liter—into numbers between 0 and 14.

In pure water, which is neutral (neither acidic nor alkaline), the concentration of the hydrogen ion is 10−7 gram-equivalents per liter, which corresponds to a pH of 7. A solution with a pH less than 7 is considered acidic; a solution with a pH greater than 7 is considered basic, or alkaline.

A pH meter is a scientific instrument that measures the hydrogen-ion activity in water-based solutions, indicating its acidity or alkalinity expressed as pH. The pH meter measures the difference in electrical potential between a pH electrode and a reference electrode, and so the pH meter is sometimes referred to as a “potentiometric pH meter“. The difference in electrical potential relates to the acidity or pH of the solution.

The Ph Sensor has a rod-like structure usually made of glass, with a bulb containing the sensor at the bottom. The glass electrode for measuring the pH has a glass bulb specifically designed to be selective to hydrogen-ion concentration. On immersion in the solution to be tested, hydrogen ions in the test solution exchange for other positively charged ions on the glass bulb, creating an electrochemical potential across the bulb. The electronic amplifier detects the difference in electrical potential between the two electrodes generated in the measurement and converts the potential difference to pH units. The magnitude of the electrochemical potential across the glass bulb is linearly related to the pH according to the Nernst equation.

The reference electrode is insensitive to the pH of the solution, being composed of a metallic conductor, which connects to the display. This conductor is immersed in an electrolyte solution, typically potassium chloride, which comes into contact with the test solution through a porous ceramic membrane. The display consists of a voltmeter, which displays voltage in units of pH.

DFRobot Gravity: Analog pH meter V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. As an upgraded version of pH meter V1, the sensor greatly improves the precision and user experience. The onboard voltage regulator chip supports the wide voltage supply of 3.3~5.5V. The output signal filtered by hardware has low jitter. With this Ph Sensor, you can quickly build the pH meter to measure the Ph value of the different aqueous solutions.

The Ph Sensor Kit has Signal Conversion Board (Transmitter) V2 and also pH Probe. Both of them are connected with each other. The features of both of these parts are as follows.

Ph Sensor has 3 pins that need to be connected to Arduino. So, connect the VCC pin to 5V of Arduino and GND to GND. Connect its analog pin to A0 of Arduino as shown in image above.

Once the code is uploaded to Arduino Board, you can open serial monitor and start testing the Ph Sensor. I tested the Ph Sensor with All 4 solutions given above and found the following results

Now Let us display the Ph Value on OLED Display instead of Serial Monitor. To do that we need to add a 0.96″ I2C OLED Display to Arduino Uno. Hence the connection diagram is shown below.

The connection is fairly simple again. Connect the Analog pin of Ph Sensor to Arduino A0 pin and supply 5V to it. Also, connect the SDA SCL pin of OLED Display to Arduino A4 & A5 Pin respectively.

The source code for Interfacing DFRobot Gravity Ph Sensor with Arduino and OLED Display is given below. Simply copy the code and upload it to the Arduino Board.

Once the code is uploaded the OLED display will start showing the value of Ph. Dipping the Ph electrode on different solutions will give different value as shown in the images below.

If you worked with PH metering before you will know that PH values range from 0-14. Where PH 0 is very acidic, PH 7 will be neutral and PH 14 very alkaline. The biggest problem while using the Ph Sensor is about the calibration. Since the Ph sensor is an analog sensor so there is a need for calibration as the output is dependent upon the voltage. So we need a solution whose Ph Strength is known to us. There are various buffer solutions available in the market whose PH is fixed.

The simplest method to calibrate the Ph sensor is to dip the ph electrode on the solution of known strength and observe the reading. For example, when the electrode is dipped in a solution whose Ph Value is 7, the reading should show 7. In case it doesn’t show the correct reading, you need to rotate the potentiometer placed on Signal Conversion Board (Transmitter) V2. Once the reading matches, you can stop rotating and hence the sensor is calibrated.

Note: In my case I used Milkfor calibrating the sensor as I didn’t have any buffer solutions. The ph of milk is between 6.5 to 6.7. So you can also use Milk for calibration.

The sensitive glass bubble in the head of the pH probe should avoid touching with the hard material. Any damage or scratches will cause the electrode to fail.

After completing the measurement, disconnect the pH probe from the signal conversion board. The pH probe should not be connected to the signal conversion board without the power supply for a long time.

Incase if you are not satisfied with the Analog Ph Sensor, then you can use Atlas Scientific Ph Sensor which has better accuracy & result due to I2C & UART interface.

Maker Soil Moisture Sensor measures soil moisture by capacitive sensing, where the presence of water in the soil will increase the probe capacitance. The output of the se..

Need to detect rain fall and keep your cloth in? You can use this low rain detector/sensor. It comes in 2 parts, the sensor plate and sensor module board. Not to forget..

Planning for auto gardening project? You might need this moisture sensor to detect moisture of your soil further control the pipe valve to water your plants :)This se..

Grove - Water Sensor detects the presence of water using exposed PCB traces. The sensor is made up of interlaced traces of Ground and Sensor signals. The sensor traces ha..

This Water Level Sensor Float Switch is a sensor used to sense the level of the liquid within a tank, it may further trigger a pump, an indicator, an alarm, or other devi..

The Grove - Moisture Sensor can be used to detect the moisture of soil, to judge if there is dampness around the sensor. It can be used to decide if the plants in a garde..

The Grove - Capacitive Soil Moisture Sensor (Corrosion Resistant) is a soil moisture sensor based on capacitance changes. Compared with resistive sensors, capacitive sens..

A pH test meter is an electronic device used for measuring the pH value (acidity or alkalinity) of a liquid. A typical pH meter consists of a special measuring probe (a g..

This Gravity: Analog pH Sensor/Meter Kit V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in vario..

Octopus Soil Moisture Sensor Brick can read the amount of moisture present in the soil surrounding it. It"s a low tech sensor, but ideal for monitoring an urban garden, o..

This is a non-contact water / liquid level sensor for Arduino. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed o..

This moisture sensor can read the amount of moisture present in the soil surrounding it. It"s a low tech sensor, but ideal for monitoring an urban garden, or your plant"s..

Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with diffe..

This is a photoelectric water liquid level sensor that is operates using optical principles. The advantages of this are good sensitivity and no need for mechanical parts ..

Analog PH Sensor Kit with PH Electrode Probe is Compatible for Arduino. The pH stands for the power of hydrogen, which is a measurement of the hydrogen ion concentration in the body. This is used in Water quality testing and Aquaculture. The total pH scale ranges from 1 to 14, with 7 considered to be neutral. A pH less than 7 is said to be acidic and solutions with a pH greater than 7 are basic or alkaline. The PH electrode has a single cylinder that allows direct connection to the input terminal of a pH meter, controller, or any pH device which has a BNC input terminal. The pH electrode probe is accurate and reliable that can give almost instantaneous readings.

This Kit is specially designed for Arduino controllers and has a built-in simple, convenient and practical connection and features. It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. If pre-programmed, you will get the pH value easily.

Pins Description:To : The output of the temperature sensor for temperature compensation. At a temperature of 25°C is the voltage of about 3.6 V with increasing temperature the voltage decreases (with a delay). At 100°C is the voltage of about 0.85 In.

Po : the output of the ph sensor (-0.4 V to 0.4 V) amplified 2x. The mean value of the voltage of the ph sensor 0V (PH7) is shifted in the range of about 1V to 2.5 V using the potentiometer closer to the connector for the ph probe.

Step to Use the pH Meter:Connect equipment according to the graphic, that is, the pH electrode is connected to the BNC connector on the pH meter board，and then use the connection lines, the pH meter board is connected to the analog port 0 of the Arduino controller. When the Arduino controller gets power, you will see the blue LED on board is on.

Put the pH electrode into the standard solution whose pH value is 7.00，or directly shorted the input of the BNC connector. Open the serial monitor of the Arduino IDE, you can see the pH value printed on it, and the error does not exceed 0.3. Record the pH value printed, then compared with 7.00, and the difference should be changed into the “Offset” in the sample code. For example, the pH value printed is 6.88, so the difference is 0.12. You should change the “# define Offset 0.00” into “# define Offset 0.12” in your program.

Put the pH electrode into the pH standard solution whose value is 4.00. Then wait about one minute, adjust the gain potential device, let the value stabilize at around 4.00. At this time, the acidic calibration has been completed and you can measure the pH value of an acidic solution.

Before the electrode in continuous use every time, you need to calibrate it by the standard solution, in order to obtain more accurate results. The best environment temperature is about 25 ℃, and the pH value is known and reliable, close to the measured value. If you measure the acidic sample, the pH value of the standard solution should be 4.00. If you measure the alkaline sample, the pH value of the standard solution should be 9.18.Subsection calibration, just in order to get better accuracy.

Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online monitoring. It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, then plug the PH2.0 interface into the analog input port of any Arduino controller. If programmed, you will get the pH value easily.

This industrial pH electrode is made of sensitive glass membrane with low impedance. It can be used in a variety of PH measurements with fast response and excellent thermal stability. It has good reproducibility, is difficult to hydrolysis, and can eliminate basic alkali error.

In 0pH to 14pH range, the output voltage is linear.The reference system which consist of the Ag/AgCl gel electrolyte salt bridge has a stable half-cell potential and excellent anti-pollution performance.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

I search for build a PH meter for my fish tank. I want a PH reading , have a LCD display , can also provide a temperature information. I search on market , I can"t find any similar PH meter module except this one.

For PH meter board , I choose to use this one. This provide PH reading and two temperature sensor , one is LM35 for measure room temperature , one is DS18B20 for measure water temperature.

For the Case , I use my 3D printer for print the case that fit the Arduino UNO R3 + LCD Keypad Shield + PH meter board. I also put the design on thingiverse.

After wiring everything , then I start the develop the Arduino Sketch. Download the most update Arduino Sketch in here : https://github.com/kevinlohk/ArduinoPhMeter

- For the future , I wish will have the off-line calibrate function. That mean enter the Calibration Mode , put the PH probe in the PH4 buffer solution , and then press the key on keypad. Store the value in EPPROM. And then put the PH probe in the Ph7 buffer solution , press the key on keypad and store the value in EPPROM.So no need to connect computer for complie the code and upload to the UNO anymore. But this function not yet start develop.Special Thanks for Clément Saillant , who made this happen. :)

- Serial port communication via UNO "s USB port. Now already implement four command : Read PH , Read Room Temperature , Read Water Temperature and Read all reading.

- For future , I will build an small program for Raspberry Pi , so that Pi connect PH meter via USB cable , and then read all the information and store in Pi"s SQLLite database and I can visit it via Web.

This pH sensor is commonly used to test the pH of a liquid as it measures the hydrogen-ion activity in water-based solutions. Wherever acidity and alkalinity testing is required, it is frequently employed in the chemical businesses, pharmaceutical industry, dye industry, and scientific research. This kit’s drive board works with both 9V systems. It’s also very easy to work with Arduino and Raspberry Pi thanks to the standard BNC probe interface and Grove connection. A Power Indicator LED, a BNC connector, and a PH2.0 sensor interface is all included.

To use it, simply connect the pH sensor to the BND connection and plug the PH2.0 interface into any Arduino controller’s analog input port. If pre-programmed, you will get the pH value easily. Comes in a compact plastic box with foams for better mobile storage. The pH stands for the power of hydrogen, which is a measurement of the hydrogen ion concentration in the body. The PH electrode has a single cylinder that allows direct connection to the input terminal of a pH meter, controller, or any pH device which has a BNC input terminal. The pH electrode probe is accurate and reliable that can give almost instantaneous readings. This product is known as PH Detector, PH Sensor Detector, PH Level Detector, PH Sensor, PH Level Detector, PH Sensor for Water, PH Sensor for Water and Wastewater Monitoring, PH Sensor Kit for Arduino, PH Level Sensor

I am programming a ph sensor with lcd, i have tried multiple option as i needed to do alot of else/if statementdue to the requirement, however in the bolded section of my code the lcd is not showing i am unsure what i am doing wrong, is it due to a simple error?