40x2 lcd display quotation

If you need to display a lot of information on your device, this extra wide LCD will do the job with an active area of 5.8-inches (147.50 millimeters). Like all transflective displays, the 5x8 character matrix on this 40 x 2 LCD screen can be read in direct sunlight, is good for typical office lighting, and is easy to read in dark locations. One of our customers bought a display in the CFAH4002A series to use in an environmental control system for irrigation management.

As with other standard character displays, the parallel interface communicates with your host using 4-bit or 8-bit mode. The built-in Sitronix ST7066U controller is compatible with the industry standard Hitachi HD44780 controller. Software written for the HD44780 should work without any changes. For controller details, see the Sitronix ST7066U datasheet on our website.

Our goal is to keep every product available as long as possible. We"ve sold the CFAH4002A series since 2008 and it is still going strong. With a white LED backlight, this FSTN (Film compensated Super-Twisted Neumatic) display module has a higher contrast ratio than the standard STN, resulting in superior sharpness and contrast. A simple current limiting resistor in line with the voltage source works well in most applications. The white LEDs do not demand a current source, although one may be used. For details, see the backlight section starting on page 22 of the datasheet.

STN Yellow/Green background color with Y/G LED backlight, bottom (or 6:00) viewing angle, Transflective (positive), 5V LCD, 5V LED, RoHS Compliant. This display has a wide temperature range: -20° Celcius to +70° Celcius which equates to (-4° Fahrenheit to +158° Fahrenheit). IC = SPLC780

STN (Super-twisted Nematic) provides a sharper image and wider viewing angle than TN (Twisted Nematic). The cost for STN if approximately 5% higher than TN. STN is an ideal fluid for outdoor products that need to be read at various angles. The Transflective polarizer is a mixture of Reflective and Transmissive. It provides the ability to read the LCD with or without the backlight on. It will work for all lighting conditions from dark with backlight to direct sunlight which makes it the most common choice. There is no cost difference between Transflective, Transmissive and Reflective.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

The 402A is our 40 character x 2 row chip on board (COB) alphanumeric displays. These classic LCD modules are available in a multitude of LCD and LED backlight color combinations to achieve the perfect look for your product. Some of our most popular combinations are STN yellow-green LCD with yellow-green LED backlight, STN blue LCD with white LED backlight, and STN grey LCD with either blue, amber or pure green LED backlight.

Newhaven 40x2 character Liquid Crystal Display shows characters with dark pixels on a bright yellow/green background when powered on. This transflective LCD Display is visible with ambient light or a backlight while offering a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-0240AZ-FL-GBW display has an optimal view of 6:00. This display operates at 5V supply voltage and is RoHS compliant.

Easily modify any connectors on your display to meet your application’s requirements. Our engineers are able to perform soldering for pin headers, boxed headers, right angle headers, and any other connectors your display may require.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

40x2 character lcd is a root category including various types of character displays, including character display panels, arduino character display, character display modules, and more. The displays have an LED backlight and are able to display characters such as letters, numbers, and punctuation marks for application in various kinds of machines, data loggers, and measurement devices.

Different 40x2 character lcd options are equipped with controllers or driver chips that contain built-in character or font tables and have become widely popular in multiple industries. You can find routers that come preloaded with characters for multiple languages, including English font, along with many other international languages that are also available. There are also options for either negative mode or positive mode on monochrome display, so you can find 40x2 character lcd options that are able to achieve the right appearance you want for your use.

You can find a different range of displays under this category to suit your specific application, such as alphanumeric displays, scrolling message character displays, and various size configurations, including 16x2 character displays, 16x4 character displays, 20x2 character displays, 20x4 character displays, 24x2 character displays, 40x2 character displays, 8x1 character displays, 20x2 character displays, 40×4 character displays, and many more different sizes.

If you"re looking to source bulk 40x2 character lcd products for your business or wholesale 40x2 character lcd modules for reselling, you can find multiple options on Alibaba.com to suit your needs. Products are available at different price ranges to suit different wallets.

AZ Displays offers the below standard sizes. In addition, we are equipped to manufacture to customers’ custom needs and designs. We have a full service engineering department to help develop new character LCD modules and reverse engineer existing projects.

as i said before, i"m quite happy with my lcds so if you"ve gotten one from bg micro, just use that.  vfds look great also and aren"t difficult to read at all, although they can often appear too bright when the lights are out (you can adjust the brightness though)...i guess this can be said about lcd backlights also...  anyway, i think that the decision should be based on aesthetic reasons more than anything - both types of displays are easy to read in the dark, it just depends on which one you think would look cooler with your project.  i will say this, however: i"m not sure how difficult it is to implement a vfd display.  in other words, with an lcd display you just hook up the data pins and the leads on the backlight.  not sure if it"s as simple with a vfd display.  perhaps someone who has used one could provide more detailed input here?