innolux n070icg ips lcd panel pricelist

We are one of the professional and experienced suppliers of 15.6 inch LCD display module G156BGE-L03, offering you the quotation and the price list consultation. Welcome to wholesale the high-end, quality and low price products in stock with us. Good after-sale service and fast delivery are available.

Hot Tags: 15.6 inch lcd display module g156bge-l03, China, suppliers, wholesale, buy, cheap, discount, low price, in stock, lg lcd oled, micro lcd screen, a small lcd tv, TFT LCD Module Screen NL6448BC33 64D, lg lcd for pc, small lcd tv 15 inch

Please make sure N070ICG-LD1 is the right LCD display panel you need before buying, mainly based on the model, brand, and the appearance to judge, some lcd display panels have the same model name, but with different appearance, example the position of the screw hole, so please carefully confirm if this is the right accessory you need. If you don"t find the right product on our website or need any help, feel free to contact us at any time.

The N070ICG-LD4 is a 7.0 inch diagonal a-Si TFT-LCD display panel product from Chimei Innolux Corporation (hereafter called Chimei Innolux), with an integral WLED backlight system. It features an operating temperature range of -10 ~ 60°C , a storage temperature range of -20 ~ 70°C . It"s general features are summarized by Panelook in the following: WLED Backlight, U/D,L/R Reverse . Based on its features, Panelook recommend that this model be applied to MID UMPC, Pad & Tablet etc. According to the information stored in Panelook this model mass production on Q4, 2011, Now this model is discontinued. There are 3 items stock and 0 suppliers of this model on Panelook. We inputted this model"s specification on Feb 2 2013 for the first time. If you want to embed N070ICG-LD4 LCM in your future product, Panelook strongly recommend that you should contact with Chimei Innolux or it"s agent to learn lateast production and specification detail. The N070ICG-LD4 production status marked on Panelook.com is for reference only and should not be used as the basis for the user"s decision making. The above parameters are not from the datasheet, only as a reference, please use with caution!

Contents ◾ 1 Controller ◾ 2 Datasheet ◾ 3 Specification ◾ 3.1 EDL LCDs ◾ 3.2 EDS SPI LCDs ◾ 4 Pins Definition and Wiring ◾ 4.1 EDL ◾ 4.2 EDS SPI LCDs ◾ 5 Dimensions ◾ 6 Hardware Design ◾ 6.1 Schematic ◾ 7 Software ◾ 7.1 Demo Video ◾ 7.2 Code ◾ 7.3 Other tools ◾ 8 Large size Vendor LCDs ◾ 9 Obsolete

Output RPI Controller Size Resolution Application Input Interface to MCU connection to Arduino Linux LCD at070tn90, etc, RPI 5in parallel(DBI?) / HDMI-IN github LCDRTD2660H 7in TTL_FPC / LVDS ? 7in LCD shield (up to 1.2?) / VGA / AV showST7735 1.8in SPI LCD DBI / SPI UTFT, ADLIBILI9325 SPI LCD, 2.2in RPIILI9340 (old) 2.2in DBI / RGB / SPI UTFT, ADLIB HAT 2.2, 2.4, SPI LCD, 2.4/3.2in RPIILI9341 320x240 DBI / RGB / SPI UTFT, ADLIB 2.8, 3.2 HATILI9481 / ILI9486 / arduino 3.5 shield, RPI compatible with 3.5, 4.0, 320x480 DBI / RGB / SPIILI9488 3.5in ILI9341HX8352HX8357 3.5in 3.5in RPI HAT ADLIBSSD1289SSD1963 800x400 RGBS6D1121OTM8009A 3.97in 800x400R61581 4.0in 320x480

◾ Extra VCC, GND, LEDA (LED back light) also need to connect ◾ LED_A Pins for the back light of the screen, max volt at 3.2V, connect 20ohm for 3.3V, and 500ohm for 5V, as a current limited purpose.LCDs Pins Description Touch Pin Description SD Card Pin DescriptionRS Data / Command D_CLK Clock SD_SCK Clock pinWR Write D_CS Chip Select SD_DIN Data inRD Read D_DIN Data in SD_CS Chip selectCS Chip Select D_DOUT Data out SD_DOUT Data outRST Reset D_PENIRQ InterrupptD0-D15 Data Pin

Common Name Description Display Pin Arduino Pin Discription ConnectionSCK Serial Clock (SPI) D13 LEDA V3.3 Back lightDO Data out, MISO (NA for 1.8 LCD) D12 (optional) VCC VCC VCCDI (SDA for GND GND GND Data in, MOSI D111.8) Reset 16 - A2 resetCS Chip select, setup this in the head of your arduino sketch D10 CS 17 - A3 chip select D/C, Command/Data switch, setup this in the head of your arduino WR 18 - A4 Write registerAO D9 sketch RS 10 - A5 Register selectReset reset pin D8VCC power supply, can use 5V or 3.3V, on board regulator LDO VCCGND power ground GNDLED backlight 3V (actually 3.2V, can add 5ohm resistor in serial) -

◾ All the pins must be connected, if not connect, it won"t work (Athough not all the pins are defined in the arduino sketch). ◾ All the pins power/logic should be 3.3V, include LCD back light. ◾ LCD power supply can be 5V, on board LDO regulator ◾ 1.8 can use 5V for test, the rest can not doDimensions

EDS 2.2in SPI LCD EDS 2.4in SPI LCD EDS 2.4in SPI LCD EDS 2.8in SPI LCD 1.8in SPI LCD R2 2.4in SPI LCD R2 (N/A) (N/A)

EDS 1.8in and 2.2in EDS 2.4in SPI LCD EDS 2.8in SPI LCD EDS 1.8 SPI TFT LCD 3.5in Arduino LCD HY-TFT320SPI LCD SCH SCH SCH (old) shield

◾ HY-TFT320: File:HY-TFT320 schematics.pdf ◾ For 1.8 SPI TFT LCD, JP1 is the power level selector, short connecting it when you supply the power with 3.3V

◾ Demo video with displaytext sketch test. (1.8 LCD) (http://www.youtube.com/watch?v=6DH7ljxuD3k) ◾ Demo video with ILI9341 sketch (2.2 LCD) (Pro mini 3v3/8M) (http://youtu.be/f45CYMsevL4) ◾ Demo video with ILI9341 (2.2 LCD) with arduino UNO and logic shifter (https://www.youtube.com/watch?v=c2npSZgvVh4) ◾ 2.2 LCD working with Beaglebone, code supported (provided by kind customer:) (https://www.youtube.com/watch? v=0nE2QpSg3aY&feature=youtu.be)

◾ Arduino official TFT library (in arduino IDE) ◾ UTFT library, not yet tested (Arduino library) ◾ Adafruit library (https://github.com/adafruit/), use library Adafruit_GFX and Adafruit_ST7735 ◾ File:Raw LCD datasheet EDS2.4.pdf3.5in arduino library

◾ Quick start up demo code for ITDB-02 3.2 16 bit LCD version (http://www.electrodragon.com/wp-content/uploads/2012/07/TFT3_2_Mega_Demo.zip) ◾ Quick start up Demo code for ITDB-02 2.4 8 bit LCD version (http://www.electrodragon.com/wp- content/uploads/2012/05/TFT01_8Bit_For_Arduino.zip) ◾ Display Touch screen test code (http://www.electrodragon.com/wp-content/uploads/2012/05/TFTTouch.zip) ◾ Arduino UTFT library here (http://henningkarlsen.com/electronics/library.php?id=39) ◾ 8 bit ITDB 02 Graph library (http://www.electrodragon.com/wp-content/uploads/2012/05/ITDB02_Graph.zip) for our 2.4 8bit display.

◾ 3.2 Bare(withou PCB) LCD datasheet ◾ 2.4 Bare LCD Schematic (not PCB) ◾ UTFT Library from here. (http://www.henningkarlsen.com/electronics/library.php?id=51)

Large size Vendor LCDs Header text Header text Header textat070tn90 at070tn92 WVGA innolux digital, parallel 8-bit RGB, FPCN070ICG-LD1 7.0" 1280*800 IPS Innolux 39 pins LVDS (1 ch, 8-bit)PDC32MC6L-0101 3.2in EDL LCD Chimei

Pins Name Description Common Connecting to Arduino PinGND Power Ground - GNDVCC Power VCC - 5VNC...NC NC1, NC2, NC3 - NCReset Reset LCD reset pin Pin 8A0 D/C - Pin 9SDA SDA LCD data input/slave input Pin 11 (MOSI of arduino)SCK SCK Clock Pin Pin 13CS CS Chip Select of LCD Pin 10SD_SCK - - -SD_MISO - - -SD_MOSI - - -SD_CS - - -LED+ LED+ LED VCC 3.3VLED- LED- LED GND GND ◾ Reference Setup link 1 by simtronyx.de (http://blog.simtronyx.de/en/a-1-8-inch-tft-color-display-hy-1-8-spi-and-an-arduino/) and link 2 by benbarbour.com (http://www.benbarbour.com/arduinolcd)