gpio 5-inch 800x480 tft lcd manufacturer

This is a 5 inch mini HDMI resistive touch screen with 800*480 resolutionfor Raspberry Pi, the high resolution will provide a large viewing screen for Raspberry Pi. Compared with another type of 5-inch display for Raspberry Pi, the backlight of this 5-inch display can be controlled by Raspberry Pi GPIO pin 11. Generally, the backlight is on, then input a high level, and it will turn off. The Pin 11 control a MOS tube switch on or off, the MOS tube switch will enable and disable the EN end of the backlight power IC. This design makes it convenient to control the backlight when we put the display into a product and safe power at the same time.

Raspberry Pi leads out 40 GPIO pins, while the screen leads out 26 pins. When connecting, pay attention to the corresponding pins and Raspberry Pi pins.

This 5 inch TFT Display with Touch Screen is a mini panel-mountable HDMI-compatible monitor. So small and simple, Although the 800x480 common HDMI-compatible display is made for Raspberry Pi 2B 3B B+. but you can use this display with any computer that has HDMI-compatible output, and the shape makes it easy to attach to a electronic product.

WF50FSYFGDHGV is an IPS 5 inch High Brightness 800x480 TFT-LCD module with Capacitive Touch Panel (PCAP). WF50FSYFGDHGV comes with a control board which only supports Raspberry PI system HDMI Signal interface (only DVI). There is a 40-pin GPIO connector on the control board which is designed to make Raspberry Pi usage easy. The control board on module is featured with four mounting holes which is an easy method for customers to fix modules on their applications. WF50FSYFGDHGV is adopts IPS panel which has a wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical value). The brightness is 750 nits (typical value); the Capacitive Touch Panel is built in with ILI2130 IC which supports USB interface. We also offer Resistive Touch Panels (RTP) for WF50F HDMI signal series, available part number WF50FSYFGDHTV (RTP touch screen).

● The Module used SSD1963 LCD controller with 5 inch LCD module with touchpad. Job stability of the module with super anti-jamming capability,far beyond driven solutions on the market SSD1963 , SSD1963 interference poor, black and white with crash risk .

● This LCD has a superior display quality and super wide viewing angle,it using 8080 timing sequence with 16bit parallel bus interface, resolution 800 × 480, 16M colours display panel.

● The LCD has a SD slot, SPI flash footprint. It"s pinout is pin to pin compatible with TFT Shield for arduino MEGA 2560.The TFT LCD Module has embedded Font IC, which contain fonts of 10 sizes and 236 icons.With this LCD module, you will be able to draw bigger and nicer fonts, and also extended ASCII characters too.

● For Raspberry Pi user, 5" inch TFT LCD Display Module is compatible with Raspberry Pi 3 2 Model B RPi 1 B B+ A A+ ,Detailed tutorials including project introduction and drives CAN BE PROVIDED FOR FREE,contact us BY Email to get documents

8)LCD-specificed intialization code is provided, so that you can save time to optimize power control register and gamma curves for best display performance. We have test the provided code, it gives the best display performanace

This is a 5 inch mini HDMI touch screen for Raspberry Pi, the high resolution will provide a large viewing screen for Raspberry Pi. Compared with another type of 5-inch display for Raspberry Pi, the backlight of this 5-inch display can be controlled by Raspberry Pi GPIO pin 11. Generally, the backlight is on, then input a high level, it will turn off. The Pin 11 control a MOS tube switch on or off, the MOS tube switch will enable and disable the EN end of the backlight power IC. This design makes it convenient to control the backlight when we put the display into a product, and safe power at the same time.

desertcart is the best online shopping platform where you can buy HDMI GPIO 5-Inch 800x480 TFT LCD Display with Touch Screen Monitor Display for Raspberry Pi from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the HDMI GPIO 5-Inch 800x480 TFT LCD Display with Touch Screen Monitor Display for Raspberry Pi to and more cities in Armenia. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the HDMI GPIO 5-Inch 800x480 TFT LCD Display with Touch Screen Monitor Display for Raspberry Pi speedily without the hassle of shipping, customs or duties.

desertcart buys HDMI GPIO 5-Inch 800x480 TFT LCD Display with Touch Screen Monitor Display for Raspberry Pi directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy HDMI GPIO 5-Inch 800x480 TFT LCD Display with Touch Screen Monitor Display for Raspberry Pi from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

Note: This page listed the 5-inch 800 x 480 5-point Touchscreen with Raspberry Pi 4 Model B kits. Please choose the preferred choice under "Available Options":

This 5" (5-inch) TFT touchscreen screen/display with a resolution of 800 x 480 is perfect for your Raspberry Pi boards. With a DSI interface, true color display, easy installation, and space-saving design, it is a perfect touchscreen monitor for your DIY and on-the-go projects! What we like about this screen is the DSI cable provides the path for both the power and data (graphic and touch sensor), no additional wiring is needed! Super neat.

Note: We notice the WiFi connection on Raspberry Pi 4 Model B will be slow. However, it will still connect to WiFi AP :) Just a little more time. We believed this is due to the PCB antenna on the Raspberry Pi board, and the DSI cable is near that antenna; the wireless signal will be attenuated a little bit. Using the PCB Spacers (included) to increase the gap between the LCD and Raspberry Pi will help.