sw lcd display for sale

1. Data display:It shows speed, total mileage, single mileage, stage cumulative mileage and power-assist stalls, riding time, battery charge status and other cycling parameters;

7. Night driving:With LCD back-light display and a headlight switch control function, the meter back-light and headlights can be turned on during at night;

To ensure better performance of your e-bike, please read through the SW-LCD product introduction carefully before using it. We will use the brief words to inform you of all the details (including hardware installation, setting and normal use of the display) when using our display. Meanwhile, the introduction will also help you solve possible confusion and barriers.

SW-LCD housing material: PC. And the color of housing is white or black. Working temperature scope: -20℃—+60℃, the shell material can ensure normal use and good mechanical performance of the products.

Display content: battery capacity, motor power ratio, riding speed, riding distance, power, PUSH cruise control, and error code display of the electronic control system.

After start-up, please hold both UP and DOWN for 2.5 seconds at the same time, LCD will enter into the setting state, and the settable parameter will flash. The parameter can be set circularly.

Press UP or DOWN to modify the backlight brightness. You can choose from level 1 to level 3. Level 1 is the minimum brightness. Level 3 is the maximum brightness. The default value of the backlight brightness is level 1. Press the MODE to confirm the backlight brightness, then enter into the interface of Choice of Display Unit.

Press MODE, then the display starts to work and supply power to the controller, long press MODE then switches off power. In the status of OFF, the display and controller no longer consume battery power.

Hold UP and the display will show the MAX speed during this ride. Hold UP again and the display will show the AVG speed during this ride. Hold UP again and the display will turn to the current speed display.

Press MODE to switch between riding distance and total distance. This function is convenient for users to check the riding distance (TRIP) and the total distance (ODO).

Hold both UP and MODE for 3 seconds and turn on the SW-LCD backlight, when the surrounding light is not enough or it is in the evening. Hold both UP and MODE for 3 seconds again and you can turn off the SW-LCD backlight.

If there is something wrong with the electronic control system, the display will show the error code automatically. The following is the definition of the error code.

This operating instruction is a general-purpose software (version V2.0). Some of the versions of the e-bike LCD may have slight differences, all with the actual use version.

The LCD Display Upgrade provides additional information while riding, including Speedometer, Odometer, Trip Odometer, Average Speed, Max Speed, and Pedal Assist (PAS) levels 1-4. This replaces the stock LED display on the RadRunner, RadMission, and RadExpand.

[{"id":39964692283556,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"866 Display","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"EBike LCD Display 866 for A20","public_title":null,"options":["Default Title"],"price":4900,"weight":2000,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}]