raspberry pi tft display dsi brands

CONS: low refresh rate & resolution, supports Raspberry Pi only, requires Raspberry Pi 40PIN GPIO (the SPI bus), poor compatibility with Raspberry Pi system.

PROS: high refresh rate, multiple resolution support, multiple devices support, leaves the Raspberry Pi 40PIN GPIO free, better compatibility with Raspberry Pi system.

Waveshare 11750 - 10.1inch Capacitive Touch Screen LCD (B), With Case And Toughened Glass Cover, 1280×800, HDMI, IPS Screen, Supports Raspberry Pi And PC, Low Power Consumption - 10.1inch HDMI LCD (B) (with case)

Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi, a larger version of our popular Inky pHAT display, with more than 5x the number of pixels, and available in three colour schemes - red/black/white,...

A high-resolution 8", IPS, 1024x768, HDMI display, with Pimoroni-made display driver board and keypad, that"s perfect for building into projects like arcade cabinets, or just use it as a handy display for your Raspberry Pi!

Build a full-featured media center capable of playing nearly all of your digital media using any 40 pin Raspberry Pi and the Media Center HAT Raspberry Pi touchscreen display. Native support in...

Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi, a larger version of our popular Inky pHAT display, with more than 5x the number of pixels - red/black/white version.

If you"re looking for the most compact li"l color display for a Raspberry Pi B+, Pi 2, & Pi 3 (most likely a Pi Zero) project, this might be just the thing you need!

In honour of Raspberry Pi"s 10th birthday, we"ve fused a RP2040 microcontroller with an EPD display to make a stylishly monochrome, maker friendly, e-paper badge(r)...

This is a 4.3" Raspberry Pi LCD touchscreen with a resolution of 800*480 and a display area of 95.04x53.86mm. This product supports Raspberry Pi DSI display interface, the screen has a capacitive touch panel, plug and play, and no installation required Driver. The design on the back of the screen with holes is convenient to installing the Raspberry Pi directly in the product. The display powered by the Raspberry Pi and does not require an external power supply. In addition, the screen has a backlight brightness adjustment button, which supports an external PWM signal for backlight brightness adjustment.

Note: The capacitive touch function does NOT work with the latest Raspberry Pi OS - Bullseye (release date: 30th October 2021). You can revert back to Raspberry Pi OS Buster following this tutorial.

This 7" TFT touch screen display with a resolution of 800 x 480 and capacitive touch is perfect for your Raspberry Pi boards. With a DSI interface, true color display, easy installation, and space-saving design, it is a perfect touch screen monitor for your DIY and on-the-go projects! What we like about this screen is the DSI cable provides the path for BOTH the POWER and DATA (graphic and touch sensor), no additional wiring is needed! And NO DRIVER installation is necessary! Super neat and easy to use.

We recommend adding the 5mm PCB spacer before mounting the Raspberry Pi board to increase the space between the LCD. This will also help in handling the microSD card.

Don"t have a keyboard with you? Don"t worry. You can always use a virtual keyboard on your Raspberry Pi screen. Let us show you how.Go to Preference > Add / Remove Software

This is a 5" Raspberry Pi LCD touchscreen with 800x480 resolution and 108×64.8mm display area. The product supports the Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points.

The special holes design on the back of the screen is convenient to directly install the Raspberry Pi in the product. There is no need to provide external power for the touchscreen as the Raspberry Pi power supply is adopted. In addition, the screen supports hardware backlight adjustment. The function can be realized by turning the potentiometer on the back of the display.

This is a 7" Raspberry Pi LCD touchscreen with 800x480 resolution and 108x64.8mm display area. The product supports the Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points.

The special holes design on the back of the screen is convenient to directly install the Raspberry Pi in the product. There is no need to provide external power for the touchscreen as the Raspberry Pi power supply is adopted. In addition, the screen supports hardware backlight adjustment. The function can be realized by turning the potentiometer on the back of the display.

PROFESSIONAL RASPBERRY PI MONITOR ---- Raspberry Pi hobbyist could not miss this perfect monitor! Easily mount your Raspberry Pi to the exposed backside. Raspberry adaptor board is built in. Save your space, keep your desktop neat. . As no use GPIO, you can work to your DIY IoT projects when you use this screen at the same time

EXCELLENT PICTURE PERFORMANCE ---- 5 inches TFT color display monitor with high resolution picture and large viewing screen. Perfect for creating portable. Capacitive Touch Screen, Finger Touch, better touch response, faster response time, 800 x 480 pixel high resolution, support up to 1920 x 1080 input and auto-scaling

DSI CONNECTOR, EASILY ASSEMBLED, PLUG AND PLAY, NO DRIVER NEEDED! for Raspbian OS---- Free drive support Raspbian, Ubuntu MATE, Kali, RetroPie, OpenElec, OSMC, Kodi, Arch Windows 10 IOT system and so on. This drive free monitor designed DSI for signal and data transmission. No need additional power for touchscreen. No program or software support required. You just need to install DSI cable on your screen and raspberry pi DSI port, No need jumper wires then power on raspberry pi device which build OS.

SENSITIVITY TOUCH ---- Excellent sensitivity capacitive technology and multi touch capability, you can place it your way to get things done easily (OS Raspbian just supports one point finger touch) Ideal touchscreen monitor for DIY projects! Equipped with reserved fixing holes for control boards - Support Raspberry Pi 2, 3 Model B, 3 B+, 4

This Bundle set Includes 1 piece 5" DSI Touch LCD Screen for Raspberry Pi, 1 pc DSI FFC FPC Ribbon 15 pin Cord Flat Wire Cable Connection, 1pc Philips screw driver. a user guide manual come in the nice box

The official Raspberry Pi 7” Touchscreen allows you to add touch inputs to your programs, creating a new way to interact with your projects. It also makes for a fantastic desktop screen for day-to-day use of your Raspberry Pi. Wrap it in one of our screen cases and take it anywhere – events, Raspberry Jams or even just your friends house for a coding evening!

For smaller projects, LCD and ePaper displays are a fun way to add a visual element to your projects. With simple code and wiring, they’re great for projects that require text, menus and navigation.