when troubleshooting an lcd panel monitor that is malfunctioning free sample

This article explains how to test your computer monitor to find out whether or not it"s working properly. This process could take from a few minutes to much longer, depending on the cause of the problem.

Check for disconnected monitor power cable connections. Your monitor might be working fine and your only problem may be a loose or unplugged power cable.

Also be sure to check for any cable adapters that aren"t fully secured, such as a small connector that joins an HDMI or DVI cable to a VGA plug, or vice versa.

Check for disconnected monitor data cable connections. Again, your monitor might be turning on without a problem but no information can get to it because the cable that connects it to your computer is disconnected or loose.

Turn the monitor"s brightness and contrast settings completely up. It might be showing information but you just can"t see it because these display settings are too dark.

Most modern monitors have a single on-screen interface for all settings, including brightness and contrast. If it turns out that your monitor isn"t working at all then you"ll likely not have access to this interface. An older monitor might have manual knobs for adjusting these settings.

Make sure all monitors are set up properly (if this is a dual-monitor setup). This step might seem too general, but if you"re using two or more monitors, it"s possible that the extended displays work just fine but the operating system isn"t using them properly.

This could be due to a number of things like a missing/corrupt video card driver or an incorrect setup procedure. For example, maybe a projector is connected to the laptop but not set up as an additional screen (so it remains black), or maybe the projector is configured as the primary display, and so the on-board screen is black.

Test that your computer is working correctly by connecting to your PC a different monitor that you"re certain is working properly. Your monitor might be fine but your computer might not be sending information to it.

Determine why your computer isn"t sending information to your monitor. Since neither monitor works, you now know that the computer isn"t sending information to the monitor. In other words, you"ve proven that your computer, not the monitor, is the reason that nothing shows up on the screen.

Test your original monitor with a monitor data cable that you know is working. It"s possible that the monitor itself is working properly but it can"t receive information from the computer because the cable that connects the monitor to the PC is no longer working.

If possible, test using the data cable from the monitor that you successfully tested earlier. If not, purchase a replacement monitor data cable to test with. The data cable on some older monitors are permanently connected to the monitor and aren"t replaceable. In these cases, you"ll have to skip this step and replace the monitor.

If nothing works, you might not have had a monitor problem at all but instead there might be an issue with the rest of the computer system. As mentioned above, it"s probably time to figure out why nothing is being sent to the monitor.

Liquid crystal displays (LCDs) are the most widely used display technology. Their applications cover TV, mobile phone, appliances, automotive, smart home, industrial meters, consumer electronics, POS, marine, aerospace, military etc. LCD screen display problem can occur for several reasons.

Effect of environmental conditions on the LCD assembly. Environmental conditions include both the effects of temperature and humidity, and cyclic loading.

Effect of manufacturing process. With the development of LCD for more than 40 years and the modern manufacturing equipment, this kind if defects are getting rear.

Common failures seen in LCDs are a decrease in screen contrast, non-functioning pixels or the whole display, and broken glass. Different kinds of LCD display problem need to have different kinds of fix methods or make the decision not worthwhile to repair.

Broken glassIf you accidently drop the LCD and you find it broken on the surface but the display still works. You might just break the touch panel; you can find a repair house or find a youtube video to replace the touch panel. If you find the display not showing, especially you find the fluid leaking out. You need to reply the whole display modules.

Dim LCD displayLCD can’t emit light itself. It uses backlight. Normally, the backlight is not fully driven, you can increase the LED backlight to make a dim LCD display brighter. But if you LCD display has been used for a long time, it is possible that the LED backlight has to be the end of life (not brightness enough) if you turn on 100% backlight brightness. In that case to fix LCD screen, you have to find a way to change the backlight. For some display, it is an easy job but it can be difficult for other displays depending on the manufacturing process.

Image sticking (Ghosting)Sometimes, you will find the previous image still appearing at the background even if you change to another image. It is also called burn in. This kind of failure doesn’t need to repair by professionals. You can simply shut off the display overnight, this kind of problem will go away. Please do remember that displaying a static image for a long time should be avoided.

With the modern manufacturing process and design, this kind of failure rarely happens. Normally, it is caused by no power. Please check if the battery dead or adapter (power supply) failure or even check if you have plug in firmly or with the wrong power supply. 99% the display will be back on.

LCD has white screen – If a LCD has a white screen which means the backlight is good. Simply check your signal input sources which are the most causes. It can also be caused by the display totally damaged by ESD or excess heat, shock which make the LCD controller broken or the connection failure which has to be repaired by professionals.

Blur ImagesAs the LCD images are made of RGB pixels, the screen shouldn’t be blur like old CRT displays. If you do see blur images, they might be caused by two reasons. 1) LCD has certain response time, if you are playing games or watch fast action movies, some old LCD displays can have image delays. 2) The surface of the LCD is made of a layer of plastic film with maximum hardness of 3H. If you clean the surface often or use the wrong detergent or solvent which cause the surface damage. To fix damage on LED screen it’s need to be changed with professionals.

If you have any questions about Orient Display displays and touch panels. Please feel free to contact: Sales Inquiries, Customer Service or Technical Support.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Just like televisions, laptop displays start to flicker too after a few years. You may sometimes also notice the display turning blank even when the laptop is on. Alternatively, you might find some white lines running down the display.

This doesn’t necessarily mean that there is an issue with the motherboard. If your laptop keeps turning off every few minutes and doesn’t turn on, there is a high chance that the AC adapter has malfunctioned. You can get help from a professional to confirm and get the AC adapter replaced, if required. There is also a possibility that the DC power jack may have broken. A DC connector (or DC plug) is an electrical connector that supplies steady power to the device.

If the DC jack has broken, you can try adjusting the plug’s angle in its jack. If you see some lights turning on but the device is still not booting, it’s time to replace the DC jack. If that doesn’t help, it’s a clear indication of a motherboard-related issue. You can either get the motherboard repaired or replaced by the brand service center. Getting the motherboard repaired could cost you anywhere up to Rs 10,000, whereas the cost of replacing the motherboard can go anywhere up to Rs 25,000.

If you ever notice multi-coloured or single-coloured vertical lines on your laptop screen, it may be a result of a hardware failure or due to damage to the screen. To try fixing it yourself, first unplug your laptop, hold the power button for 30 seconds and restart the laptop. If you continue to see coloured lines, the issue is probably with the LCD screen, which will need to be replaced from the brand’s service center. To be sure about the LCD screen problem, try connecting your laptop to another monitor and see if the issue persists. If it does, the issue is certainly in the LCD panel.

On turning on the laptop when you see the lights blinking and hear the fan working but if the laptop screen is blank and doesn’t display anything, this is again an indication of a faulty motherboard. The first thing to do is to transfer all the data to another drive to make sure your data is safe. Before going ahead and getting the motherboard repaired or replaced, you could try performing a hard reset (also known as a factory reset), which can mostly help in resolving the blank display issue.

Firstly, check if your laptop’s brightness level is set to maximum. If the display is still dim, try restarting the device. This could just be a system error that can be resolved by restarting the device. Also, check if the AC adapter cord is loose and firmly connect it to the outlet and laptop. If the issue still persists, it is mostly due to a failure of the LCD. Behind the LCD, there is an inverter board and backlight bulb which control the picture.

The inverter board converts the low voltage your laptop uses, into higher voltage required by the long bulb that lights up the LCD screen. If the inverter board or bulb fail, you will experience the problem of a dimmed display. Even if one of these two components fail, the screen will need to be replaced, unless the service center can help by just replacing the bulb. We wouldn’t recommend you try resolving it yourself, as this is more complex and you could end up damaging the circuit board and the backlight lamp. So, it’s best to leave this job to an expert.

Laptops are fragile and can easily break, especially with more and more thinner and lighter models being launched now. Some of the most common ways how a laptop is damaged include: when it accidentally falls and the screen cracks, when it’s held at an awkward angle or if you unknowingly placed something heavy on the laptop. Remember, a cracked laptop screen can affect the overall functioning of the device in some cases.

Since brands do not cover the laptop screen, it’s best to get your device covered with a protection plan in advance. Screen replacements are expensive and can cost you anywhere up to Rs. 15,000 but if you have the

Need an expert to take a look at your laptop? Book Onsitego’s on-demand repair service. Besides taking care of common laptop problems like battery draining or laptop hanging, we can help with issues like setting up the operating system or removing malware/virus from your device. Our service engineers are qualified and use only good-quality spare parts while repairing. The best part is that our service is backed with a 90-day post-service warranty.

Follow Onsitego on Facebook, Instagram, Twitter, and YouTube to get the latest news, reviews, maintenance tips, and videos about your favourite gadgets and appliances.

If you’re able to use one external monitor, but have issues using more than one, it’s possible that your display adapter (also called a graphics card) can’t support more than one monitor. For information on how many monitors your display adapter can support, contact its manufacturer.

Note:If you are trying to use a display splitter extend your display to more than one external monitor, you won"t be able to. The splitter is duplicating the same signal instead of creating two independent signals.

If your device only has one video output port, then by default, you can only support a single external monitor. You"ll need one of the following to support more than one external monitor:

If you’re able to use one external monitor, but have issues using more than one, it’s possible that your display adapter (also called a graphics card) can’t support more than one monitor. For information on how many monitors your display adapter can support, contact its manufacturer.

Note:If you are trying to use a display splitter extend your display to more than one external monitor, you won"t be able to. The splitter is duplicating the same signal instead of creating two independent signals.

If your device only has one video output port, then by default, you can only support a single external monitor. You"ll need one of the following to support more than one external monitor:

Accidental Damage is any damage due to an unintentional act that is not the direct result of a manufacturing defect or failure. Accidental damage is not covered under the standard warranty of the product. Such damage is often the result of a drop or an impact on the LCD screen or any other part of the product which may render the device non-functional. Such types of damage are only covered under an Accidental Damage service offering which is an optional add-on to the basic warranty of the product. Accidental Damage must not be confused with an occasional dead or stuck pixel on the LCD panel. For more information about dead or stuck pixels, see the Dell Display Pixel Guidelines.

No, accidental damage is covered for Dell computers or monitors which are covered under the Accidental Damage Service offering for that specific product.

For more information about Dell Limited Hardware Warranty and Dell"s Accidental Damage service offering, see the Dell Warranty & Support Services page.

NOTE: Other damages may be considered customer induced if determined by Dell Technical Support, an on-site field engineer, or at the mail-in repair center.

The LCD glass on the display is manufactured to rigorous specifications and standards and will not typically crack or break on its own under normal use. In general, cracked, or broken glass is considered accidental damage and is not covered under the standard warranty.

Internal cracks typically occur due to excessive force on the screen. This can be the result of some object hitting the screen, a drop, attempting to close the lid while an object is on the keypad area, or even holding the laptop by its screen.

Spots typically occur due to an external force hitting the screen causing damage to the LCD panel"s backlight assembly. While the top layer did not crack or break, the underlying area was compressed and damaged causing this effect.

If your Dell laptop LCD panel has any accidental damage but the laptop is not covered by the Accidental Damage service offering, contact Dell Technical Support for repair options.

Dell monitors cannot be repaired by an on-site field engineer or at the mail-in repair center. If you notice any damage to the monitor, you must purchase a new monitor.

Laptop users can strive to make the most of their laptops to maximize stability, longevity, and usability. Understanding and implementing a few best practices for the safe handling of their laptop will enable them to enjoy their laptop for many years to come. For more information, see the Dell knowledge base article Dell Laptop Best Practices for Care, Use, and Handling.

When TechRepublic first published a tutorial to correct flickering monitors, it was 2001. Since then, the computer world has changed significantly, and screens have come a long way. For example, CRT monitors — which were the norm back then — are much more sensitive and temperamental than the modern LED screens many of us use today.

But, despite this and many other advancements in screen technology, flickering screens are still an issue. And because screens have evolved as device types have diversified, the quest for solving this kind of problem has grown more complex.

In this guide, we’ll offer you tips for troubleshooting your flickering screen across laptops, mobile devices, desktops and a variety of other device types.

There are many reasons why a screen could be flickering, including physical damages to hardware, software problems and bugs in specific applications. Changes in settings and malware can also cause your computer or mobile screen to perform poorly.

Don’t lose hope if your device or computer screen seems to be out of play. There are several things you can do that might solve the problem quickly, whether you’re using a desktop computer, a connected monitor, a laptop, a smartphone or a tablet. The best troubleshooting route will depend on what device you are experiencing problems with as well as what operating system you are running.

In general, these are some of the best places to start when correcting a flickering screen. Remember that the higher the rate, the more energy the device will need to refresh the screen. When using smartphones, tablets and laptops, higher rates can deplete batteries more rapidly.

The first thing you need to check if you are using a monitor that connects to a computer is the cables. Whether you’re using VGA, HDMI, DVI or a display port cable to connect your monitor to a computer, it makes no difference; if the cable isn’t securely connected, there are going to be issues.

To start, you should check the cable at both the computer and monitor ends. If tightening it down or reconnecting it doesn’t solve the problem, try replacing the cable with a new one.

Laptop screens have cables that run hidden inside the frame and core of your computer. While you will not be able to rapidly fix this without professional help, you can identify if the cables are the problem.

To check these cables, start by turning your laptop on. Once the screen begins to flicker, slowly close and open the screen. If you notice changes to the flickering when you open and close the screen, that’s a good indicator that there are issues with the inner cables. Unfortunately, unless you have advanced computer hardware repair skills, you will need to take your laptop to a trusted repair shop to fix this issue.

Another important aspect of your device to check is the monitor refresh rate. The monitor refresh rate is the number of times the screen image is refreshed in a second, as measured in Hertz. If the refresh rate is too slow or otherwise under-optimized, you may experience issues with screen flickering and lag times.

While most users never adjust the refresh rates, it is a key component for how well your screen performs – it also affects battery life. Faster monitor refresh rates make it possible to rapidly move videos and images, as well as create a smoother motion experience when browsing or creating content.

Note the refresh rates that appear; these will differ, depending on your display and what it supports. Some laptops and external displays will support higher refresh rates than others.

Flickering screens on laptops, smartphones and tablets may be caused by physical damage, like after the user has dropped the device. In hardware damage cases, only professional support can help you identify and solve the problem. Before taking your device to be fixed, you might want to check out a couple more of our tips.

Nearly all devices use a video card to properly display images. In desktop computers, this device needs to be properly positioned on the motherboard or it will cause a lot of problems, which could include a screen flicker. You can check your desktop computer video card by turning your computer off and opening the outer case.

You’ll want to find the video card and check if it’s properly connected; if it is, it should be firmly in place. If the card is seated on the motherboard properly but the issue persists, a faulty card is likely the cause of the problem. Testing this is easy, especially if the computer has an onboard GPU that you can plug into.

You can also test a new card. To do this, power down the computer, remove the video card and connect the monitor cable to the onboard card or a second video card you’ve replaced the old one with. If the problem persists, then the issue is not related to the video card.

It’s always possible the monitor itself has gone bad, but before you consign it to the recycling pile, there are a few things you should do. Start by inspecting the monitor for physical damage and using the monitor’s onboard buttons to check for settings that may be causing the issue. If everything looks okay, it could still be a bad monitor.

To check this, unplug it and replace it with another monitor. If the new monitor is working properly, you’ve found your culprit; if the new monitor faces similar problems, you likely have an underlying issue with your computer or software.

There are a couple of steps you can take to fix your Windows or Mac screen if the above steps have failed. Here are additional tips for troubleshooting your Mac and Windows devices.

Although this may seem all too simple, sometimes restarting your computer is exactly what you need to fix a flickering screen. A full shutdown is the best way to completely reset and refresh your Mac in order to test this method.

You can check macOS and device updates by opening the System Preferences app and selecting Software Update. To update your apps, go to the App Store and select Updates from the sidebar. Once the list of all pending app updates appears, select Update All.

True Tone is designed to automatically correct images based on light levels, but this feature can cause a screen to flicker. To disable True Tone, go to the Apple menu, then System Preferences and click Displays. Now select your display and click on Display Settings. From here you can uncheck the True Tone checkbox (Figure F).

You have the option to test your Mac with Apple Diagnostics. This test will provide more detailed troubleshooting results and guidance to solve the issues your Mac may be experiencing. Learn how to run Apple Diagnostics at Apple Support.

The NVRAM — or PRAM — is memory Apple uses to store system settings in your Mac. These settings may be the cause of a flickering screen. You can reset the NVRAM on an Intel-based Mac, though not on Apple Silicon models.

To reset the NVRAM, shut down your Mac and turn it back on. Then, immediately press and hold these four keys at the same time: Option, Command, P and R. After 20 seconds, release the keys. Your Mac will restart with the original NVRAM settings.

Your device’s Task Manager can be used to see if an app or a driver is making the screen flicker. To do this test, press Ctrl + Alt + Delete, and the Task Manager will open. If the screen flickers but the Task Manager does not, then you have a bad driver or app problem; if the Task Manager flickers, you might have a malfunctioning hardware problem.

An incompatible driver or app can cause screen flickering problems. Microsoft’s official support page for Troubleshoot screen flickering in Windows has a detailed step-by-step on how to solve driver and app display problems like this.

If you are having problems with an iPhone or an Android smartphone, some of the steps listed above might work for you. Restarting your smartphone and ensuring your system is up to date is the best place to start.

As a last resort, you can back up your phone data and do a hard reset. Resetting a phone to factory settings will wipe it clean, but it will also restore the initial settings and remove any malware that may be causing the flickering.

A flickering screen can be a real nightmare; fortunately, screens are more resilient than they were a couple of years ago. Additionally, there are numerous tricks, tips and steps you can take before even thinking about repairing your screen or replacing it for a new one. Regardless of what kind of screen you’re struggling with, this guide offers great initial resources for solving the problem.

Never miss one of our long-form feature stories. Previous topics include a profile of Python"s creator Guido van Rossum, the Raspberry Pi"s origin story, smart farming and the future of food, and how IoT is being used to fight climate change.

The LCD screen is vital for operating the printer. Should you encounter any kind of trouble, such as a dead screen, corrupted text, or other issues, please refer to the guide below.

First of all, unscrew the LCD screen from the printer frame, remove both M3x10 screw holding it the LCD board in the plastic casing, and remove it from the casing. See if the problem still appears when the LCD is not pressed by the casing.

Firmware updates are necessary to keep your printer up to date. However, the installation of incorrect firmware can lead to letter corruption on the LCD screen. There"s an easy fix, though:

There is a small chance the printer"s LCD screen can glitch out by electrostatic discharge when inserting the SD card. Try to turn the printer off and on again.

This problem usually appears only on user-assembled printers. If your printer"s LCD screen remains blank or displays corrupted symbols after you turn on the printer, there is a chance it is caused by incorrect wiring. Follow these steps to fix the issue.

Double-check that all cables are properly seated and they are not visibly damaged. Depending on the model of your printer, please refer to the following guides for information on how to make sure the cables are properly connected: Einsy RAMBo electronics wiring (MK3/MK3S/MK3S+) and Mini RAMBo electronics wiring (MK2S, MK2.5, MK2.5S).

If you suspect that the LCD ribbon cables connectors are not firmly seated in the slots, disconnect the LCD ribbon cables and check the slots for any bent pins. If there are bent pins, you can use tweezers to fix them. However, be very careful not to break the pin(s) completely.

If none of the above resolved the problem, turn the printer off again and try to unplug both of the cables, lay them down on a flat surface and gently stretch them. Then plug them back in and turn on the printer.

Too often, we plug all of our computer presentation equipment in, fire up our presentation and … we don’t get what we expected. It might be that we can see our presentation on our laptop computer, but the screen or projector won’t show the presentation. Maybe we see the presentation on both our laptop and the projector but we want to see Presenter View on our computer so we can see our notes. Before you get that panicked feeling and think the projector is not working properly, check these six most common problems with computer presentation displays.

Laptops have multiple display modes. The four most common are: 1) laptop display only, 2) external display only, 3) duplicate the laptop display on the external display, and 4) extend the laptop display onto the external display. The computer may not be in a mode that displays the presentation on the external display properly.

There are two typical modes that presenters use. The duplicate displays mode allows the laptop and the projector/TV to have the same content. This is the mode that most presenters use. Some presenters use the extend display mode because the Presenter View option in PowerPoint requires this mode. Presenter View allows you to show your slides on the external display while the laptop has a view that contains the current slide, upcoming slides, and your notes (This Microsoft article explains how to use Presenter View in more detail). While this mode sounds appealing, it does depend on the hardware capabilities of the laptop and the projection system, which most presenters have no control over. I don’t suggest you rely on this mode working all the time. This article gives you different options for your speaking notes.

Some laptops default to extended display mode when they are connected to some projectors or TVs. To switch display modes in Windows 8 or 10, press Windows+P (hold the Windows key and press the letter P). You can now use your arrow keys to select the mode you want and press Enter when done (or use your mouse to click on the desired mode). Many laptops also have a key combination that will allow you to rotate between the display modes. If you have Windows 7, this will be the method you use to change display modes. Look for a key (usually one of the function keys) that has a picture of a display on it. You usually have to hold a special Function key (usually labeled Fn) and press this key to switch between the different modes. After you press the key combination, wait at least five to ten seconds for the new setting to take effect before you toggle to the next setting.

It is amazing how many display problems are caused by loose cables between the computer and data projector. Make sure all cables are securely connected to the appropriate port. With many laptops requiring dongles to convert between mini DisplayPort or USB-C ports and a VGA or HDMI cable, check each connection is secure. Remove and re-seat each cable/connector to make sure.

On data projectors or TVs that are often used with multiple input sources, the input source selected on the data projector/TV may be using a different input source than the one your computer is connected to. There is usually a button on the top of the projector, side of the TV or on the projector/TV remote control which allows you to toggle between the different input sources. You may have to go into the data projector/TV settings menu to change the input source on some older projectors/TVs.

Incredible as it seems, power being turned on is one of the common problems. This happens because when we turn on our laptop, if it is not plugged in, it will still run on battery. We don’t realize that the projector has not been plugged into the power outlet and when we turn it on, nothing happens. Check that the power cord is in the wall outlet if the data projector does not turn on.

If you plug your computer into a projector that someone else has just been using and your display does not come up, check if the projector’s standby mode is on. This standby mode keeps the projector fan running but does not light the bulb. It is usually used for cooling a projector after a presentation.

When data projectors are moved or transported, the cover can sometimes come loose. When this happens, they will power up but not turn on the bulb for safety reasons. Turn off the projector and check to see that all covers are securely on. Never check for loose covers with the projector on, you will risk being electrocuted or burned by hot components inside the projector.

Want a more comprehensive checklist you can quickly refer to the next time your presentation won’t display? Click here to get my Presentation display problem checklist.

Are you looking for a customized workshop where your staff can learn to create PowerPoint presentations that have a clear message, focused content, and effective visuals?  Click here to learn more about my customized in-house workshops. If you are an individual who wants to learn these skills at your own pace, check out my guided self-study course.

Dave Paradi has over twenty-two years of experience delivering customized training workshops to help business professionals improve their presentations. He has written ten books and over 600 articles on the topic of effective presentations and his ideas have appeared in publications around the world. His focus is on helping corporate professionals visually communicate the messages in their data so they don’t overwhelm and confuse executives. Dave is one of fewer than ten people in North America recognized by Microsoft with the Most Valuable Professional Award for his contributions to the Excel, PowerPoint, and Teams communities. His articles and videos on virtual presenting have been viewed over 3.5 million times and liked over 14,000 times on YouTube.

Your Windows system and the data in it may mean the world to you. However, it is still a device that can run into various problems. Here, we’re talking about the ‘no display on boot’ issue. Several users have posted queries stating that they can turn on the computer but can’t see anything on the screen. The display appears blank. Even the GPU fan spins at full speed, but there is no display. So, why is it happening? How can it be fixed?

We dug deeper into the matter and found some tips and tricks that may help. However, before that, let’s understand the different states of no display on boot problems.

The primary reason you get no display on your PC could be damaged or loosely connected cables. Other reasons may include incorrect display configuration, faulty or problematic GPU or RAM, incorrect BIOS configuration, faulty peripheral devices, or damaged PSU (Power Supply Unit).

You should check your power connections if you face the “no display on boot” error. There might be some connection errors between the power sockets and the PC/monitor.

Check if all the wires, ports, and adapters are connected properly. In addition, check if the video and power cables are firmly attached at both ends.

Now check if the power light on your monitor is on. If the light is ON, reboot your system and press Windows key sequence (Windows + Ctrl + Shift + B command) to wake the screen. It will restart your Graphics driver.

If there is no light on the monitor, check if the cables connected are damaged. Try the cables on another PC or attach other cable cords to your system.

If the above diagnosis doesn’t help you overcome the ‘no display on PC’issue, try resetting your BIOS settings. This method will help you check if the RAM is at fault here. When you power on your PC, it runs POST (Power-on-self-test), verifying if all hardware is identified before BIOS initiation. It also displays on-screen if the RAM is working fine. As long as your monitor receives power, you may access the BIOS utility and reset it to fix multiple issues.

Turn on your system with the Power button and press the BIOS key (usually F2/F8/F10/F11/F12/Del). You can also check for the BIOS key online by visiting your device manufacturer’s site.

The Voltage Selector Switch may be set to the correct switch, but it’s worth checking. It is a physical button given at the back of the PC. The switch lets you balance your device’s internal circuit with the input voltage. If it is set improperly, it may affect your system’s boot function.

Usually, the default value set by the Voltage Switch doesn’t need any changes as it matches your country’s requirements. But if you bought it from an overseas dealer or just moved to a new country, you would need to adjust the Voltage Selector Switch considering the country’s requirements. For example, your system may happily work for 110 volts. You can also refer Foreign Electricity Outlet Guide.

Sometimes, there may be a conflict between the peripheral devices, causing a black (blank) screen or no display on your screen. It includes your Bluetooth, speakers, mouse, webcams, external storage drivers, keyboard to cameras, scanners, etc.

An outdated, corrupt, or incompatible device driver may cause no display on a PC or laptop. Rolling back or updating these drivers may fix the problem. For this, you would need to boot your PC into Safe Mode.

You can also check your CPU performance in BIOS to determine if no display on boot issues occurs due to PC overheating. However, this method will only work if you can access your system in Safe Mode. Follow the given steps:

When you see the BIOS page emerging, click PC Health Status, System Hardware Monitor, or similar options. (The category name may vary depending on your system brand.)

Try rebooting your system. Sometimes, only a restart fixes the problem. However, if it doesn’t, you can refer to the Microsoft page to troubleshoot black screen or blank screen errors.

If there is a faulty battery on your system, it may remove all your boot settings. Hence, you can see nothing but only a black screen while booting your system with a damaged CMOS battery.

There could be many reasons for the black screen of death in the Windows system, including graphic card errors, disk errors, unexpected OS behavior, faulty display, malware infection, or peripheral devices malfunctioning. However, the error is fixable.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.