7 cte tft lcd sd shield for arduino mega for sale

This is SainSmart MEGA2560  + 7 inch TFT LCD module with the TFT LCD shield kit For arduino enthusiasts.It includes one pcs of SainSmart MEGA2560 , 7 inch TFT LCD display and a TFT LCD shield for Arduino MEGA2560.This kit helps you to avoid complicated wiring processes and save you much time to accomplish your goal. You can feel free to enjoy the touch function and SD card function by using our codes.We will provided you the whole document including the example project of the kit. We will supply you the technical support after your purchase.

This is the new MEGA2560 R3. In addition to all the features of the previous board, the MEGA now uses an ATMega16U2 instead of the ATMega8U2 chip. This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

The MEGA2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The MEGA2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.

It is 100% compatible with the normal MCU like ARM AVR PIC and 8051,especially on Arduino family such as Arduino Due and Arduino MEGA2560(R3). The module uses the LCD controller Chip SSD1963 with 7 inch LCD including the touchscreen.

LCD-specificed intialization code is provided, so that you can save time to optimize power control register and gamma curves for best display performance. We have test the provided code, it gives the best display performanace

This is Sainsmart TFT LCD Extend shield for arduino due .Using this shield can help you out of the bothers to use other cables. You just need to plug the module to arduino due through this shield.

The shield defines that all the the data transmit ports are PC1-PC8 and PC12-PC19,the controll pins are PD0-PD3.The perfect design could realize that the data transmits in high speed.The SPI interface is designed in the ISP header of arduino due so that the SPI transfer with DMA could be achieved in high speed with no drag.

This shiled is just for Arduno MEGA2560. If you need the LCD Extend shield for Arduino Due,you need a similar shield which is also provided from our store.

This shiled is just for 7 inch TFT LCD.If you need the LCD Extend shield for 3.2/3.5/...,you need a similar shield which is also provided from our store.

This is SainSmart 7 inch TFT LCD module with the TFT LCD shield kit For arduino enthusiasts. It includes one pcs of 7 inch TFT LCD display and a TFT LCD shield for Arduino MEGA2560(R3). We will provided you the whole document including the example project of Arduino MEGA2560(R3) with the kit. We will supply you the technical support after your purchase.

It is 100% compatible with the normal MCU like ARM AVR PIC and 8051, especially on Arduino family such as Arduino Due and Arduino MEGA2560(R3).The module uses the LCD controller Chip SSD1963 with 5 inch LCD including the touchscreen.

LCD-specificed intialization code is provided, so that you can save time to optimize power control register and gamma curves for best display performance. We have test the provided code, it gives the best display performanace

This is SainSmart TFT LCD Extend shield for Arduino MEGA2560(R3). Using this shield can help you out of the bothers to use other cables. You just need to plug the module to Arduino MEGA2560(R3) through this shield.

The shield defines that all the the data transmit ports are PC1-PC8 and PC12-PC19,the controll pins are PD0-PD3.The perfect design could realize that the data transmits in high speed. The SPI interface is designed in the ISP header of arduino due so that the SPI transfer with DMA could be achieved in high speed with no drag.

This shiled is just for Arduno MEGA2560(R3). If you need the LCD Extend shield for Arduino Due, you need a similar shield which is also provided from our webstore.

This shiled is just for 7 inch TFT LCD.If you need the LCD Extend shield for 3.2"" or 5"", you need a similar shield which is also provided from our store.

The IO of arduino MEGA is officially 5V, TFT LCD use 3.3V IO. This CTE TFT LCD/SD shield for arduino MEGA provides the connection to a TFT LCD Module directly without flying wires.

The shield use TRUE 5v to 3.3V level translation IC, therefore, it is compatible with many TFT LCD modules. Compatibility is highest when compared to ordinary TFT Shield, which use resistors or buffer to "shift" 5V to 3.3V. Compatibility issues may arise when using this method to translate IO level to 3.3V, especially at high write speed.

The shield route all the LCD data pins to port PC1-PC8 and PC12-19, control pins to PD0-PD3, this design can achieve high speed data transfer (three cycles per write strobe to the LCD) to maximize LCD display speed. The SPI interface (for SD or flash control) is route to the ISP header of arduino DUE, so that high speed SPI transfer with DMA can be achieved.

On board SPI flash footprint with adjustable CS selection, for upgrade to include Font IC to draw text to the LCD and also support for SPIFlash library.

Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contacts

So someone provided me an "Arduino Mega 2560", a "CTE TFT LCD/SD for Arduino Due [I just read that from the shield"s PCB xd] {CTE v1.04}", and a TFT LCD Display with an SD Card slot... which is only labeled as "TFT_320QVT_9341"... that"s the only text in the PCB apart from the pins" labels.

The LCD screen can"t be directly plugged into the Arduino as it has more pins than the mega"s digital pins, so I"m assuming that the shield is included to act as an adapter between the screen and the arduino.

Since yesterday, I was trying to get it to work with UTFT (the latest version available) but I never had any luck of getting anything displayed apart from a blank, white screen of nothingness.

IF you had bought directly from CTE in the first instance, you would be looking at a working display already. However, to resolve your problem, you need to whip out your soldering iron, and fix Saincrap"s shoddy workmanship.

I ordered recently a "CTE TFT LCD/SD Shield for Arduino Mega" , which in the photos on ebay was a GENUINE CTE shield, however, when it arrived it had the wonderful words of dread :- "www.sainsmart.com" printed on the shield, and there were random blobs of solder on the jumpers just as you have before you.... I complained and got a refund, but kept the shield which I then fixed by desoldering JP1 and JP3. You should only have solder on JP2, JP4 and JP7!! (and JP9 if you wish to use the SD card).

I am familiar with Sainshit, so I VERRRRYYY closely inspected every inch of the shield BEFORE I even connected it to the Arduino, and certainly did not risk my TFT on it...

With that altered ive managed to upload the UTouch Calibration sketch with no errors, the 7" LCD screen now has the UTouch calibration first screen on asking me totouch screen to continue, its took me 2 weeks to get to this stage lol.

See, im not sure if i have to remove every single/symbol on the line, the info i have read isnt to clear on that point, so for example the above line would look like this :

My next test was to install 2 x SD Cards, one in the LCD and one in the black shield, i did this and ran the same sketch, it uploaded fine, ran the calibration first page but then it froze, so now with the SD Cards in i cant get to the 2nd screen where the smallx` are.

I have tried changing the lines in memorysaver.h and ive literally gone down the list, one at a time and re ran the sketch but the only one that seems to allow me to progress to the 2nd calibration page is the (CTE70CPLD,25,26,27,28), im pretty sure the shield is the correct one #define CTE_DUE_SHIELD 1 so i haven`t bothered altering that.

If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund within 15 days from delivery date. All returned items must be in new and unused condition, with all original tags and labels attached.

All customers should contact us and obtain Return Merchandise Authorization (RMA) number before sending anything to us. We will not be responsible for returned item(s) without notifying us in advance.

Please allow at least seven (7) days from the receipt of your item to process your refund. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your refund has been processed.

If any of the items you have purchased from us is found defective within 1 year from receipt, you are entitled to a repair under warranty. Please kindly provide us with evidence photos or videos of the defective item. After providing such information to our Customer Service team and the problem is acknowledged, you can send the items back to us for a repair.

If you want to cancel an order within 24 hours from confirmation of the payment, you will be entitled to a full refund. It is still possible to cancel an order after 24 hours, provided that it has not yet been shipped. If an order has been shipped, it’s impossible for us to cancel or modify it anymore. If you still want a refund, you required to return the item on it’s arrival.

TFT/SD Shield for Arduino MEGA 2560 LCD Module SD level translation 2.8 3.2 DUE. www 100% brand new CTE TFT LCD / SD card shield for Arduino MEGA2560 Description: Over 300pcs sold already, highest quality and compatibility, check it out HERE The IO of arduino MEGA is officially 5V, TFT LCD use 3.3V IO. This CTE TFT LCD/SD shield for arduino MEGA provides the connection to a TFT LCD Module directly without flying wires. The shield use TRUE 5v to 3.3V level translation IC, therefore, it is compatible with many TFT LCD modules. Compatibility is highest when compared to ordinary TFT Shield, which use resistors or buffer to "shift" 5V to 3.3V. Compatibility issues may arise when using this method to translate IO level to 3.3V, especially at high write speed. The Shield fits two type of TFT LCD module"s pinout: 1. 40pin version LCD which is commonly used in previous version of TFT Mega shield for Arduino MEGA 2560 2. 32pin version LCD which is commonly used in STM32 development board. (unsoldered) Check the pinout HERE Arduino MEGA 3.3v is 150mA, the output may not be enough for driving larger screen (e.g. 7", 5" LCD modules). Therefore, this shield has a onboard 1A 3.3V regulator to supply enough current to the screen. The shield is compatible with Arduino MEGA 2560 and the following LCD , which is avaliable in our store: 2.2" TFT LCD Module (220x176) 2.8" TFT LCD Module (320x240) 3.2" TFT LCD Module with Font IC (320x240) 3.2" High Resolution TFT LCD Module with Font IC (480x320) 3.5" TFT LCD Module with Font IC (480x320) (Full viewing angle IPS panel) 4.0" TFT LCD Module with Font IC (480x320) 4.3" TFT LCD Module with Font IC (480x272) 5.0" TFT LCD Module with Font IC (800x480) 7.0" TFT LCD Module with Font IC (800x480) The shield support Henning Karlsen"s UTFT library, which can be downloaded here: [link removed by eBay] Together with these SPIFlash , the shield also support Henning Karlsen"s SPIFlash library, which can be downloaded here: [link removed by eBay] To use it on the UTFT library simply: 2.Change the LCD type to your LCD module eg. UTFT myGLCD(CTE50,38,39,40,41); Download shield schematic and information HERE If you using Arduino DUE, the shield is HERE Packing list: 1. CTE TFT/SD Shield for Arduino MEGA 2560 2. 32pin header Features: True 5V to 3.3V level translation using TI SN74ALVC164245 for LCD data lines, TI SN74LVC4245 for LCD control line and SPI lines Highest compatibility. One shield for many types of TFT LCD modules. Drive TFT LCD on arduino DUE by just plugging into arduino MEGA 2560 main board, no flying wires. Compatible with 40-pin version LCD, which is commonly used in TFT Mega shield Also comptabile with 32-pin version LCD, which is commonly used in STM32 development board On board SD card slot On board SPI flash footprint with adjustable CS selection, for upgrade to include Font IC to draw text to the LCD and also support for SPIFlash library On board 1A 3.3V regulator for provide enough current for larger screens LCD power 3.3V and 5V selectable through solder jumpers LCD Backlight (LEDA+) 3.3V., 5V or PWM selectable through solder jumpers About us: We specialized in providing TFT LCD modules embedded systems for fun and creativity. TFT LCD models are tested and selected for sale for greatest quality and cheapest price. Models-specific initialization code is provided to save your time in optimizing power control and gamma values for your TFT LCD. Click HERE to see all my products which may interests you! Shipping: Shipping Service: All items will be sent from Hong Kong by HK Post. Economy Int"l Shipping (This is the default shipping method, unless specified): This shipping use normal airmail post and is not trackable Standard Int"l Shipping (For an additional charge of USD$2.5) This shipping use registered airmail post and is trackable in Hongkong Post and Post Website of some countries. Items will be sent to you as a registered packet. Express Int"l Shipping : This shipping use HK Speed post, DHL, Fedex or UPS. Usually they takes 4-7 workdays. If you need your items to be shipped in this way, please contact us and we will change the shipping charges. Item will ship to your Paypal Confirmed Address, so please make sure your shipping address is correct before you buy item. Buyer need ship to other address (not Paypal confirmed address) should contact us before buying the item. We have no responsiblity for wrong shipping due to shipping address provided wrongly. Normally, import taxes does not apply on samples and small quantities. However, if import duties, taxes and charges imposed, we are not responsible for these charges. Delivery Time: Items will be ship within 3 business days once full payment is settled. The chart shown are not the actual time, they are only for your reference. Delivery time depends on the efficiency and performance of the local post office and customs, We hope you can understand for the uncontrollable shipping time. Country Delivery Time United States 7-12 Working Days United Kingdom 7-14Working Days Canada 7-14Working Days Australia 7-14Working Days France 14-21 Working Days Italy 14-21 Working Days Spain 14-21 Working Days Rest of Europe 14-21 Working Days Asia 7-12 Working Days South America 14-28 Working Days Other countries 21-30 Working Days Payment: We only accept Paypal and we will ship out the items within three days after payment is confirmed Replacement and Exchange 1. Exchange/replace item within 7 days counting from the day you receive merchandise. 2. Buyer will pay the return shipping cost regardless any reasons. No exception. 3. Exchange/replace item if only item is in same condition as when we shipped out. No exception. 4. Unwanted product returns will be subject to a 15% restocking fee and merchandise must be in the unused condition only. Ratings and Feedback: 1. When you receive the shipment and satisfied with the product, please leave us positive feedback and 5 STAR scores DSR. We will do the same for you. 2. Please DO NOT open case with Ebay or leave neutral/negative feedback without any communication with us. If, for any reason you are not satisfied with your transaction, please contact us via Ebay Message or e-mail us and we will do our best to resolve the issue. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (7" diagonal) bright (14 white-LED backlight) and colorfu 800x480 pixels with individual pixel control. As a bonus, this display has a optional resistive touch panel with controller XPT2046 attached by default.

The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you"ll have it running in under 10 minutes! Works best with any classic Arduino (Due/Mega 2560). This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. You can connect more sensors, buttons and LEDs.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" - we"ve written a full open source graphics library at the bottom of this page that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x,y and z (pressure) and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!

For 7 inch screen,the high current is needed.But the current of arduino uno or arduino mega board is low, an external 5V power supply is needed. Refer to the image shows the external power supply position on shield ER-AS-SSD1963.

If you"ve had a lot of Arduino DUEs go through your hands (or if you are just unlucky), chances are you’ve come across at least one that does not start-up properly.The symptom is simple: you power up the Arduino but it doesn’t appear to “boot”. Your code simply doesn"t start running.You might have noticed that resetting the board (by pressing the reset button) causes the board to start-up normally.The fix is simple,here is the solution.