lippert insight lcd display factory

Complete your Insight Powered by OneControl® Camera system with the 7” Touchscreen Display Monitor so you can see what’s going on behind your RV for added safety when backing up and traveling down the road.

This anti-glare and scratch resistant display monitor includes a suction cup mount that lets you place your screen right on your vehicle’s dash or windshield, keeping it up and out of your way. When your monitor is turned on, it finds your Insight system’s WiFi signal and then easily pairs to your camera. And when you’re not using Insight, you can simply remove the screen and store it away to have more space on your RV’s dash.

The built-in speaker on the monitor connects to your microphone from your rear camera so you can be more aware when reversing your RV. The display screen also allows you to configure backup grid lines, making it easier for you to maneuver your RV. And with a high-speed 2.4 GHz/ 5 GHz wireless digital connection, you’ll always have a clean, crisp image to view during your adventures.

USER-FRIENDLY —To operate, simply turn your monitor on and the display will automatically link with your Insight system’s Wi-Fi and your display screen to your camera

We purchased a 2022 Reflection 280RS which came prewired for a Furrion Backup Camera. I have seen that the newest 2022 Reflections now come standard with a camera versus just the mount and wiring, and the camera integrates with the Lippert One Control System. I wanted to buy a Furrion Camera, but when I go onto Amazon as well as other sites, all the cameras look to come with a separate 7 inch (More or less) monitor. I dont want a separate monitor, but would rather just route the picture diect to my phone through the One Control Software.

Does anyone know what model Furrion camera is sold without a monitor that integrates to the Lippert One Control software and where I can order online?

I am new to the forum having purchased a 2022 Reflection 295RL in April 2022. This is my first post. I have had issues with the INSIGHT Backup/Observation Camera part # 2020112846 from the beginning. We did not have the best PDI with the dealer and the camera did not work when attempting to connect after getting the trailer home. I did online research and discovered a number of posts about this camera system. I placed a call to GD Customer support and in their opinion the camera was either bad DOA or was not getting power. This was determined using my cell phone to look for an "INSIGHT_D06DA7" network after powering up the rig running lights while connected to my truck. The INSIGHT_ network never showed up.

This was in June and the dealers did not have an opening for months. I decided to take the verify power route. In my research I discovered the truck connection cord 15A fuse jumper 12V+ to the running lights circuit HACK, allowing me to get 12V power to the running lights without having my truck in place. After removing the camera from the backwall I installed the 15A fuse jumper. I checked the power at the camera connection and had 13.2V DC. I pulled the power jumper, reconnected the camera reinstalled the power jumper. With the running lights on the INSIGHT_ network showed up on my Phone. I had to make a security setting change to allow connection to the INSIGHT_ network on my phone. After that I was able to connect to the camera through the COMPASS application. I quickly realized that using my phone for the backup/observation camera was not going to work for me. To Small for me. I ordered the Lippert One Control LCD Display for the INSUIGHT Camera. After receiving the LCD Display, I installed it in my truck, powered up the trailer using the 15A fuse jumper, turned the camera on and connected to the camera.