mini dvr for fpv with 2.5 tft lcd free sample

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

the mini digital video recorder and mini camera are very small and portable, you could plug the 2.5mm plug camera(in the package ) in sport, pocket,driving as portable mini video audio recorder.

you could use the mini digital video recorder in the rifle camera, ATN night vision camera, Pulsar, Yukon device, when you in the hunting or security action in the night, you also use the video recorder to assist you.

you could use the mini digital video recorder in the FPV, using it to recorder your hobby interest,the video recorder support max 32Gb SD card. It is about 9 hours recording, enough capacity ,enough fun.

DHL,Fedex,UPS,TNT, EMS and Air Mail are available. Most of mini dvr recorder will be sent out within 2 business days. Before sending, all digital video recorder will be checked again to ensure their perfectibility. Usually, the lead-time is 3 – 15 days to the major worldwide countries.

There are a wide variety of digital video recorder that are uniquely designed to suit the varied demands of users. For instance, 5.8ghz fpv dvr monitor are perfect for heightened security since their miniature size allows them go unnoticed to the eyes. At home they serve to monitor your baby"s sleep cycle or how the babysitter handles the baby and can be readily installed in a baby"s favorite doll or toy. Also, in the workplace, 5.8ghz fpv dvr monitor serve to monitor your employees" behavior and work ethics which can significantly increase performance and eliminate unnecessary costs of employing a supervisor. Additionally, mini recorders have found significant utility in the sports and fitness area due to their ease of portability

You can find a 5.8ghz fpv dvr monitor featuring infrared vision and motion detection at a wholesale price. The infrared vision is indispensable for recording in poorly lit conditions and at night. On the other hand, motion detection refers to the ability of the security camera to compare two images captured sequentially and establish whether the differences between them imply motion. When motion is detected, the camera sends you a notification to your email in a timely fashion. Consequently, with a 5.8ghz fpv dvr monitor featuring an infrared lamp and motion detection, you are certain of round-the-clock surveillance and protection.

Innovative technology in a 5.8ghz fpv dvr monitor has revolutionized video recording by use of a video compressing algorithm that economizes the space consumed by the recorded images and videos. It is a well-known fact that the storage space is likely to be filled up very quickly with capturing HD videos and pictures. The wholesale department at Alibaba.com have embarked on stocking 5.8ghz fpv dvr monitor that offer sufficient storage space, such as up to 4 terabits, coupled with a video compressing algorithm. Subsequently, digital video recorders for sale are experiencing a tremendous surge of popularity.

So you are new to FPV drones and wondering where to start? You have come to the right place! This is the first tutorial you should read on this blog, it explains the basics of buying, building and flying an FPV drone for beginners.

I strongly recommend going through the whole tutorial, but if you are feeling impatient, here are the steps to learn about flying FPV drones. Step 2: Download and practice in an FPV simulator of your choice (see my FPV sim recommendations here)

Step 4: Build or buy your first FPV drone or beginner drone kit, ideally something durable. Get 100+ crashes under your belt before seriously investing in something more premium/expensive would save you money

If you need help, don’t hesitate to ask. Just comment down below, google it, or use our forum “https://intoFPV.com“. Get someone experienced to go over your parts list before ordering will potentially save you a ton of money down the road.

An FPV drone is a type of drone that is equipped with a camera that streams live video to a set of goggles worn by the pilot, giving the pilot a real-time “first-person” view of the drone’s as if they were sitting in the cockpit of the aircraft while controlling it on the ground.

FPV drones are commonly used for racing and freestyle flying, as the pilot can navigate through obstacles and perform aerial manoeuvres with greater precision and control than with a line-of-sight view. They are also popular for aerial photography and videography for capturing unique and cinematic footage from perspectives that would be difficult or impossible to achieve with other types of cameras. The pilot can see exactly what the camera sees in real time and adjust the camera’s angle and settings accordingly.

To fly an FPV drone, the pilot wears a set of goggles to view the live video feed from the drone’s camera. The pilot then controls the drone’s flight using a remote controller with joysticks. It’s almost like playing a video game, but if you crash in the game, your PlayStation isn’t going to hit your lounge wall at 100MPH! Believe it when we say, replacing a top tier FPV drone can be just as expensive as a new PlayStation (if not more).

More and more FPV drone pilots are now flying on a professional level (racing, videography, etc), but the majority of us just fly them on our days off as a hobby. The FPV drone hobby has a strong and friendly community. The hobby provides a great opportunity for liked minded people to connect together and share knowledge and experience.

With the help of this guide, you will learn how to build a drone, how to choose components and repair it. You will also learn how to fly your FPV drone and tune it to perform exactly the way you want it to. Building and tuning an FPV drone can be a challenging and rewarding technical experience, as it requires knowledge of electronics, mechanics, and software. The hobby can provide a great opportunity to learn new skills and problem-solving.

Getting into FPV drones is cost-comparable to DJI camera drones. Here are some estimated costs for building a basic FPV drone and getting all the needed equipment: Radio controller + Simulator: $100-$300

So the total cost of building an FPV drone can range from around $400 to $1800 depending on the quality and performance of the components you choose. I showed example of one of the cheapest builds you can get in 2023 (with decent quality components and equipment) in this post.

If building a drone from scratch is too much to swallow, there are also complete ready-to-fly bundles you can buy. They include all the components you will need to start flying, might be lower quality and fewer features, but for a much more affordable price. I will talk about this in a bit more detail later in this article.

Learning to fly an FPV drone in a simulator is a safe and cost-effective way to get started and improve your skills without damaging your real drone or injuring anyone. I strongly recommend getting some flight time in a simulator (ideally 10+ hours) before buying/building your first drone.

Simulators can teach you the basic controls of a FPV drone and build up muscle memory your hands require. The physics of modern FPV simulators are exceptionally realistic, the transition from a simulator to a real FPV drone is relatively indistinguishable. Additionally, simulators allow you to practice advanced manoeuvres and techniques, such as flips, rolls, and acrobatics, without the risk of crashing your drone.

FPV sims are all excellent in their own ways. If you have a decent gaming PC I’d probably recommend Liftoff and DRL, and if you have a low spec PC, then Velocidrone is more likely to work better. Sims like Liftoff and Velocidrone have built-in tutorials to help you learn how to fly and learn Acro mode, which is what you really need.

To fly in an FPV simulator, the first item you should buy is a radio controller that supports FPV simulators. That means USB HID / joystick support that is plug and play without any dongles or adapters.

The word “drone” is being used a lot these days and has become synonymous with any unmanned aircraft with an onboard camera, and sometimes a camera is not even necessary for the title! Other than for military use, most “drones” were historically used for aerial photography (AP) and were large with a heavy payload capacity for carrying cameras and equipment.

The word Multirotor (or Multicopter) covers anything that is a “copter” with more than 1 main motor or propeller. For example, a “tricopter” has 3 motors / rotors, a “quadcopter” has 4, a “hexacopter” has 6 etc. But these are all “multirotors”.

Mini quads are designed to be fast, nimble and crash-resistant, so even when you crash you can usually just pick it up and take off again. This resilience gives pilots the confidence to fly faster, through smaller gaps, and constantly push their limits to the next level.

Since this fantastic invention, we’ve seen huge progress in the power of FPV drones, increasing propeller sizes, higher battery voltage, larger motors, all coming together to give insane power-to-weight ratios of over 15:1! Turning these little toys into insane rockets, the fastest racing drone in the world is capable of reaching 180mph(~290Kmh) in a matter of seconds.

A micro quad is basically an even smaller mini quad that have 3” or smaller propellers, with a frame size (wheelbase) of 150mm or less. There is no rules really, if it’s small, it’s a micro quad :)

5-inch is probably the most versatile type of FPV drone. It has excellent balance between power, efficiency, and agility, and it’s great for both freestyle and racing and even long-range. Components are widely available, and they are physically larger, therefore easier to work with. They are pretty powerful and can easily carry an HD camera such as the GoPro.

4 inch is the middle child. This category started to get more attention when the 250g weight limit was introduced in some countries, while the 4″ is the biggest size that can achieve that without impacting performance too much.

However when building and choosing parts for a 4″ you have to be careful, because there is no parts that are specifically designed for 4″, and you have to use parts either from a 5″ or a smaller 3″.

This results in the lack of standard when it comes to motor mounts and flight controller stack size. Some frames use 13xx-15xx motor while other uses 18xx-22xx motor. (What’s Motor Size) The same goes for the stack, some uses 20mm stack while other uses 30mm stack (flight controller mounting explained).

2-inch and 3-inch are becoming very popular, due in part to regulatory law that makes you register any quad over 250g. The other reason, electronics are getting smaller and more reliable, these small drones can do pretty much anything a 5 inch drone can do (if you are not flying with a GoPro).

Tiny Whoops are small ducted FPV drones that are designed for indoor flying. They typically have a 55mm, 65mm or 75mm diagonal motor distances (wheelbase) and weighs around 20g to 30g including battery. Here are what I think the best tiny whoops are currently on the market.

Tiny Whoops are popular because they are small, lightweight, and easy to fly. They are also relatively inexpensive and low ni power, and are often used for indoor racing. The built in prop guards (aka “ducts”) can protect people and your TV from props and let you bounce off stuff and recover. On the flip side, the ducts make them heavier and reduces performance, making them less ideal for outside use and windy condition.

Most people fly them in Angle mode (stabilized mode) and race them that way too, but they’re not nearly as good for flying in Acro – which is the ultimate goal for those who prefer to fly outside and doing freestyle and racing on full size quads.

The ultra-light (or toothpick) class gets its name from the frame looking like a bunch of toothpicks tied together. As you can probably guess, they are not made to withstand crashes, but to get the most performance out of them. But they are actually pretty crash resistant because they are so small and light.

They can range in performance from “tame” to “extreme” – some of them can approach the level of performance in a traditional 5″ prop mini quad in terms of power to weight and sheer speed.

These are 3″ or smaller drones that are equipped with propellers protectors (ducts), and carries an HD camera like the GoPro for capturing cinematic footage. They are designed for slower and smooth flights, not for freestyle and acro flying.

This category of quad is making a comeback due to the gain in popularity of long-range flying.  It is not to say that you cannot use these for freestyle. These quads are not as agile as the 5-inch and tend to be “more floaty”. The components vary quite a bit for this category depending on the style of flying you want to achieve. A 7″ has higher top speed and can carry more payload than a 5″ for carrying a better HD camera or heavier battery pack.

Typical long range build: 4-6S lipos 1500mAh or li-ion 3000mAh, 22xx-23xx motor 1300-2100kv, equipped with GPS, barometer, 433MHz or 900MHz radio system

For a quadcopter to be considered an X-Class, the frame size should be between 800mm-1200mm (diagonal motors distance).  The props size generally are 9-13 inches.  X-class was created for spectators to be more easily see visually during the race. That’s because the smaller 5-inch FPV drones, which most race events are held for, are extremely difficult to view from the stands.

Beast class uses all the same components of an X-class, but it uses a smaller, sub-800mm frame. Beast class is supposed to perform more like a 5-inch quad than X-class.

These types of quads are not recommended for beginners at all. They are expensive to build and maintain, and they are very dangerous. Remember, with great power comes…..

Octocopter in X8 configuration (just like a quadcopter, but each arm has two motors, so 8 motors in total), usually running 6-8″ propellers. These are designed to carry expensive high end cameras for professional shooting.

As your first build, I strongly recommend building a 5″ FPV drone because it’s the most versatile platform for both freestyle and racing. It’s more than powerful for carrying a GoPro. It’s the most popular size, so it’s relatively easier to get help.

The size of FPV quads have changed quite a bit throughout the years.  At the beginning, 6 inch quads were the normal. Then came 5 inch, which became the common face of FPV for a long time.

Of course, there is always exception to the trend. Long range has brought back 6-7 inch quads. And X-class and Beast class have made 12-13 inch quad popular. It is even hard to call the latter two “mini quads” anymore.

Before choosing parts for your FPV drone build, you should recognize what your goal is (what is your flying style). The common flying styles are: Freestyle

Racing is competing against other pilots flying through a designated course, usually consisting of gates that you have to go through and flags you have to fly around. Get the most powerful parts that can take abuse while keeping the weight to minimum, this is what FPV racing is about (plus the skills).

Long Range is trying to achieve long distance flight. With this style it’s mostly low key cruising, trying to be as efficient as possible by holding throttle steadily to minimize current draw and maximize flight time and distance. Here are some tips to long range flying.

Cinemaphotography in FPV (or cinematic flying) is usually referred to a relaxed flying style without too much acrobatic moves, flying in epic locations such as mountain, over water, car chasing, etc. There is no specific build for cinematic flying,  it all depends on the job. Popular builds for making cinematic footage are:

This hobby is not cheap. A pair of decent FPV goggles can cost $500+, a good radio setup can cost $250+, an FPV drone $300+… and what if you realize you don’t enjoy flying FPV drone after all?

Introducing complete RTF (read to fly) kits that are affordable, and they come with absolutely everything you need to start flying: the drone, radio, FPV goggles, battery and charger.

I recently reviewed the BetaFPV Cetus Pro FPV Kit and it’s a pretty good setup. Don’t even rush to fly the drone, you can connect the included radio controller to your computer and fly FPV simulators such as DRL, Liftoff and velocidrone. Once you get a hang of it in the sim, you should have no problem flying the Cetus micro drone in the house.

Once you outgrow the Cetus drone, consider upgrading to the Emax TinyHawk II Freestyle, it’s great value and flies pretty well. At this point you will have a perfectly functional FPV setup and a well perform micro quad for outdoor flying.

HOWEVER, the problem with RTF kits like these, as good as they are – is that the goggles and the radio controller lack features and are relatively low quality. They work, but won’t give you the full experience. And you will probably soon outgrow them, meaning you will probably end up spending money again. If you have the budget and are confident that you will stay in the hobby, buy the best possible goggles and radio you can afford, so you don’t need to replace them later.

If building a quadcopter from scratch sounds too challenging, there’s an abundance of choice for ready-to-fly quads that perform extremely well. However I do recommend building your first drone for the following reasons: Experience and Skills: The skills and knowledge you will learn from building your own FPV drone can enable you to diagnose, repair and upgrade your FPV drone later on

There are cheap DIY kits, which includes all the parts. These kits tend to be pretty low in quality (you get what you pay for after all), but they are good enough to teach you how to build an FPV drone and fly. But if you want quality stuff, get the parts separately following my recommendations.

Building your own drone requires time and effort to research, acquire parts, and assemble the drone. If you have the time and interest in building your own drone, it can be a fun and rewarding experience. However, if you’d rather spend more time flying and less time building, a pre-built option may be more suitable for you. But there’s no perfect pre-built drone, and the closer they are to perfect, the more you have to pay. And, if you break it… you will have to take it apart, learn how to solder and repair it. So even if you buy a pre-built drone, eventually you’ll have to learn how to build.

Whether you are buying a pre-built drone or building it yourself, you should make a shopping list, and have it checked by someone experienced. If you want some advice on selecting components, ask on my forum IntoFPV forum. We have a wealth of experienced pilots and are always ready to welcome new members and answer questions.

An FPV drone consists of the following parts, I have a buyer’s guide for each component: Frame: a structure where all the components sit on and provides protection to the electronics – how to choose an FPV drone frame

Additionally you will also need the following equipment to fly your quadcopter in FPV: A set of hex screwdrivers (e.g. 1.5mm, 2mm, 2.5mm) for M2/M3 bolts: AliExpress | Amazon

This can be tough for your first build. If you are not sure what to get, it’s a good idea to get what’s popular so if you run into problems, there are more people who might have the answer. Do your research and if in doubt, ask on our IntoFPV forum!

The best way to avoid incompatible hardware would be to follow someone else’s parts list. But for hardware compatibility, it comes down to mounting sizes.

FPV camera sizes differ in width: Full size (28mm), Mini (21mm), DJI (20mm), Micro (19mm) and Nano (14mm). There are some outliers, mostly in the smallest sizes, but those are usually well documented. Which camera size you should get depends on what your frame supports. You may mount other camera size by using 3D printed camera holder.

After you have chosen a frame you should look out for the motor base mounting size. For most motors, it’s 4 screws in a square pattern, measured across (or as a circle measured as its diameter): 19mm (7″ quads), 16mm (5″ quads), 12mm (Ultralight 5″ or heavier3″, 4″ quads), 9mm ( 3-4″ toothpicks), and in a triangle pattern, with the holes spaced 6.6mm apart for whoops/tiny <2″ quads.

There are different types of propeller mount on motor, 5″ or larger quads have a M5 threaded shaft, while motors in micro quads uses T-Mount (a 1.5 or 2mm shaft with two m2 holes on each side), and tinywhoops/<2″ quads may use only a push-on 1 or 1.5mm shaft.

For smaller components like radio receivers, video transmitters, buzzer and capacitors, it’s pretty flexible when it comes to mounting and it’s situational. You can mount them wherever you see fit using basic materials like zip tie, double sided tape etc.

Electronic parts have a rated minimal and maximal accepted voltage. Majority of the components can either take 5V or battery voltage (e.g. 7V – 36V or it’s listed as a cell count such as 2S to 6S). “Overvolting” may damage component or even cause fire.

For LiPo batteries, typically a 4S 1500mah (or 6S 1100mAh) on a 5″ drone would give you 5 to 7 minutes of flight time. You can start with a set of 4 batteries for practicing, but you will probably need more later on as you improve and want to fly longer.

After finishing your build, you’d want to configure the drone before flight. There are two components you want to configure, the flight controller and the ESC. You will need to download two different software to configure them because they are running different firmware.

I have tutorials that dive into detail how to do software setup, just do a search on my blog, or follow instructions in one of my build guides. For example this guide for Betaflight: https://oscarliang.com/betaflight-firmware-setup/

The most popular flight controller firmware is Betaflight, and the most popular ESC firmware is BLHeli_S or BLHeli_32 depends on the hardware you have. You can’t go wrong with these choices. Anyway here I will give you an overview of the firmware we use in the hobby.

There are quite a few flight controller firmware available for FPV drone, but it doesn’t matter, just use Betaflight – this is probably what 95% (just a guess) of the people in the hobby use. It’s free, open source, performs very well and being updated frequently. It supports virtually every flight controller available on the market (or should I say most FC are made for Betaflight?). Apart from freestyle and racing, Betaflight has added features geared for long range.

The most popular firmware which runs on 99% of all FPV quad ESCs are either BLHeli_S or BLHeli32. BLHeli32 is newer of the two, and uses a faster processor. Flight performance wise, there is very little difference, but BLHeli32 is more future proof.

There is a camera connected to a VTX, and the VTX broadcasts the video feed wirelessly to a VRX which is either built into the FPV goggles, or added to them as an external module.

Before picking FPV goggles, you should decide on which FPV system you want to pick. It’s not an easy decision, I have a post dedicated to help you decide which FPV system you should get.

There are 4 main FPV systems – analog, DJI (digital), Walksnail Avatar (digital) and HDZero (digital). The digital FPV systems offer 720p feeds (some even offer 1080p), while analog video quality is noticeably worse with static and breakups throughout your flight.

I’ve been flying digital FPV system since the initial release in 2019. Video image quality is so much clearer and sharper, there is no breakup and it’s more robust against multi-pathing interference. If you want the full FPV experience, digital FPV system is the way to go.

Despite lower image quality, analog still offers some advantages such as low cost and the lower latency which is preferred by hardcore racers. Also analog allows for much smaller VTX and antennas, making it more suitable for micro size FPV drones like Tiny whoops.

5.8GHz (5800MHz) is the frequency band that we commonly use for broadcasting the video feed. The frequency we use for radio control is on 2.4GHz, there’s almost no interference between radio and video.

Typically video transmitters and receivers support 40 channels or more. This allows multiple people flying at the same time. Spectators can also tune into FPV drones and watch the actions.

If you crash, you should unplug the battery as soon as you pick it up. If you walk back to your seat with the quad powered on, it will interfere your buddy’s video signal if they are still flying (because your transmitter is now much closer to your friend’s receiver than their own quad is).

When you fly behind a tree, or a hill, your signal will get weaker or even drop completely as you are outside of the Fresnel Zone. When this happens you might have video breakup or static on the screen. The problem becomes more pronounced with higher transmission frequencies. That’s why your 2.4GHz radio signal normally has longer range than your 5.8GHz video feed (given the same power and same antenna gains).

Remember that since most mini quad frames are made of carbon fibre, it helps to mount your antennas as far away from the frame as possible to avoid getting blocked (not just frame, but any electronic components for that matter such as your HD camera). Antenna positioning and placement are key.

DVR footage from an analog feed is far from 1080p HD quality, let alone 4K quality. Most of the beautiful footage you see online is usually recorded with a separate HD camera.

The most popular way is to put a GoPro (or similar camera) on the drone with a 3D printed TPU mount. You can also use an FPV camera system like the Runcam Split or Caddx Tarsier, that can record HD videos at the same time.

Lastly, the new kid in town is going digital with the DJI FPV system.  With the DJI system, you are seeing HD FPV feed and record in 720p which is still far better than analogue.

LOS and FPV are two very different ways of flying. However, it is tremendously useful to be able to control your quad in line of sight. Remember that your FPV system can fail, so having at least some skill at LOS flying will help you get your craft back in control in an emergency. Once you start to feel comfortable with how to move the quad around in line of sight, you can move on to FPV. With that said, this is just a safe way to go, you can start FPV without ever flying in line of sight, it’s all up to you.

Finally, I cannot stress enough how useful FPV simulators are. They really help beginners pick up the basic skills needed very quickly. Sims can dramatically reduce the cost of broken parts as well due to trying maneuvers or tricks that are beyond your capability and just other pilot errors. Here is a list of popular FPV simulators.

It takes time to relate what you learn on a simulator to an FPV drone in real life. Don’t worry it might take a few days, then it will just click and all of a sudden the sky becomes your oyster!

Acro mode might seem hard at first, but once you have learned it you are free to control your quad exactly how you want it. Betaflight has an Acro Trainer mode that will help you get used to Acro without the ability to flip or spin out of control.

Alternatively you can always switch on your video receiver first, and check which channels are being used before you switch on your video transmitter.

With proper equipment and frequency management, normally up to 8 people can fly at the same time, but typically 4 pilots is more common for an interference free race.

Remember that these racing mini quads are really FAST and powerful! They can cause some nasty injuries to people and animals, and damage to property. We have zero tolerance for people ignoring safety rules, because it does not only affect the pilot and victim, but also the reputation of this hobby. Check your local rules and regulations regarding FPV, RC and Model Flying in general

But if Blackbox is too complicated for you, you can also try to tune it without Blackbox. You won’t be able to push your quad’s performance as far, but you will see some improvements from the default settings.

After the order is shipped, you will receive a notification email containing the tracking number (you need to register BETAFPV website when placing the order). You can enter the tracking number to check your package shipment status below. Please contact BETAFPV customer support for help if you are not able to track it.

We will notify you if we are unable to ship batteries to your location. For expedited shipping like DHL, stand-alone batteries are prohibited to be shipped.Devices packed with less than or equal to two batteries like drones are available to be shipped. Devices in which Batteries contained like transmitters or goggles are accepted to be shipped without limits.

Packed with: Package contains equipment + cells or batteries that are NOT installed in the equipment. For example, BNF drones with batteries or RTF drone kits.

Contained in: Package has lithium batteries contained in equipment (properly installed in the equipment they are intended to operate). For example, radio transmitter or goggles.

Shipping time might be delayed for 3-7 days for transportation to remote regions. It might be 7 days longer if ships to islands area like Hawaii, Puerto Rico, Canary Islands etc.

Delay or delivery failure because of the consignee’s actions. These actions include, but are not limited to: changing the address after shipment, entering an unknown address or wrong address, entering incorrect contact information, and refusing to receive, etc.

Delay due to force majeure. “Force majeure” means an unforeseen, inevitable, or insurmountable objective situation and other objective conditions that cause delayed shipping, including, but not limited to: national or regional air or ground transportation system controls or interruptions (e.g., weather reasons), communication system interference or malfunction, government actions, postal administration policy changes, wars, earthquakes, typhoons, floods, fires, heavy rain, heavy fog, and other similar events.

We offer free standard shipping on orders of $99.99 or more. If your order does not qualify for free shipping, the shipping fee will be charged $5 on orders of $20 - $99.98; charged $10 on orders of less than $20. (Shipping fee will be different when delivering to remote countries/regions.)

If there will be a significant delay in the shipment of your order, we will contact you via email. Please make sure your email address is available and remember to check the email for the notification.

The nation cannot be changed once an order has been placed. If you need to change these details, please cancel the order and purchase again. Please contact BETAFPV customer support in 24 hours after placing the order if you need to change order product information or address.

You can contact BETAFPV customer support for canceling if your order has not been shipped. If your order has been shipped less than 24 hours, please contact the customer service to help. We will try to hold your order from the shipping company.

When it comes to recording the journey of your FPV flights, there are two main approaches: on-board and ground station. The FXT DVR is suitable for both thanks to its built-in battery, small size, and low weight. Moreover, it has a WiFi connection which allows controlling the HD FPV DVR remotely with your mobile device.

For newbies, the FXT brand probably does not say too much, but I think if you are in the “business” for a long time you probably already have at least one FXT product. Personally, I own one of their VTX, but they are also manufacturing many other drone accessories (like cameras, receivers, goggles, and monitors).

Disclosure: I received this HD FPV recorder as part of a product review collaboration with FXT Technology. Although the product was offered for free, all the opinions in this review remain my own.

I received the package in about 3 weeks after tracking number confirmation. Being curious if I received the latest version with a built-in battery I immediately unwrapped the package. While the box was printed with the most important features, there is no mention of being self-powered. Damn, I said, and switch-it ON – guess what? it turned ON without an external power source :)

Besides the DVR and its user manual, there are only two AV cables (Jack to 3 x RCA and Jack to Jack) included in the box. Yes, you will need to make/build/purchase your own power/charging cable. IMHO, a micro USB charging port would be more appropriate instead of that standard DC socket. Here, I should also mention that both cables have 3.5mm 4-pin jacks. This could be an issue if your FPV monitor/goggles have a 2.5mm jack socket like my Eachine LCD5802S.

The FXT DVR measures about 40 x 60 x 19 mm and weighs only 41 grams (without mounting accessory). It comes with a removable belt-clip which allows to attach it to your FPV gear. In the case of on-drone installation, you can remove the clip easily. While on the left side you have AV-In, AV-Out, and DC (7-28V) sockets, on the right side you have a micro SD slot and a two-position Power switch. It has two status LEDs: blue for recording (around the shutter button) and green for WiFi status (right-up corner). Overall, the build quality is excellent and the piano black finish makes it look like a deluxe product.

In order to explore the full potential of the FPV recorder, you need to install the FXT-DVR APP on your portable device. The tool is available for both popular mobile operating systems (download from Google Play or Apple APP store). After installation you need to look for “FXT-DVR” hotspot, the default password is “12345678“. The WiFi LED has 3 states: OFF – WiFi disabled, flashing – No client connected, ON – Client connected.

In addition to the live view, the APP allows managing recorded files (download, delete, or play). Through the FXT-DVR APP, you can also start/stop recording for both, DVR memory or Phone memory.

Due to the wide range of voltage input, you can use as an external power source any 2-6S LiPo battery. The internal battery allows about 90 minutes of continuous recording. Unfortunately, there is no battery level indicator, just a beeper when the battery is near empty.

I used my FullSpeed TinyLeader drone and Eachine LCD5802S FPV monitor for the tests. In order to connect the DVR to the monitor, I need it to make a 2.5mm to 3.5mm cable.

Just to check if its working, I also connected the out of the DVR to the in of the monitor. It worked and thankfully no overlay (OSD) added to the video feed.

While recording, the LED around the “camera” buttons flashes. There is also a recording indicator on the up-left corner of the APP screen. BTW, you can’t start recording without SD card nor a valid video source.

Recorded files are silky smooth. The 60 fps makes one hell of a difference. Bit rate is about 16 Mbps. A 4GB micro SD card can store approximately 90 minutes of recording. If you fly and record all day long, 16 GB should be a good option. Later I will upload to YouTube a comparison video between the Eachine and FXT DVR captures.

From now on, the FXT-DVR replaced my two existing FPV recorders and became my go-to option for my all FPV flights. I like that is self-powered and the 60 fps recording makes the videos much smother.

Currently, there is a wide range of FPV DVRs on the market. There are very affordable models with a starting price of $15, but they came without housing and require soldering. If you search for drone DVR’s you will find out that most of them feature only VGA (640 × 480) resolutions with 30 fps. Also, none of the DVR’s on the market have a built-in battery and WiFi APP control like the FXT DVR.

Many popular camera brands offer “split” FPV cameras with DVR. This approach is OK till you want to upgrade the camera – wiring the DVR board with another camera model is quite difficult.

SurveilZone provide thousands of products at incredible prices. We sell not only top quality products, but give our customers a positive online shopping experience. SurveilZone was founded in 2011 at ShenZhen(China), focusing on foreign trade e-commerce. We work to make your life more enjoyable.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

MIR = Mail in Rebate, IR = Instant Rebate. Prices are in Canadian dollars. Canada Computers & Electronics is not responsible for typographic or photographic errors. Prices and specifications are subject to change without notice. Promotional pricing is valid while quantities last. Logos and trademarks are copyrighted and the property of their respective owners. Canada Computers & Electronics is independently operated in Quebec. © 2003 - 2023 Canada Computers & Electronics. All rights reserved.