nzxt kraken z63 - liquid cooler with lcd display brands

This All-in-One (AIO) liquid cooler is ready for high performance CPU"s with the ability to fit in most cases. Show CPU/GPU temperatures or customize with GIFs with the Kraken Z LCD display.2.36” LCD screen capable of displaying 24-bit color

I used the mounting bracket which came with my case to install the radiator and fans. The mounting bracket was put in between the radiator and fans and then I put the screws in to hold everything in place. You can also screw the fans directly onto the radiator if you want. Then you just need to mount the fans into your case. I would suggest at this stage to connect the IN & OUT daisy chain cables. I made the mistake of installing into my case first then found it too hard to connect the cables so had to take eveyting back out to connect the cables. You have to connect the IN cable to your first fan and then the OUT into second and so forth. The first fan needs to be connected directly to your controller unless you already have RGB fans then it"s just a case of daist chaining them all together.

I have an intel CPU so I didn"t need to change the bracket on the pump. If you have AMD all you need to do is swap it for the correct bracket. Before you mount the pump you need to connect the correct backplate to the back of your motherboard. Then you mount the pump to the CPU and motherboard. The pump comes with thermal paste pre applied however I used my own.

Next step is to connect the fans to your motherboard. In my case I have the nzxt controller so I just connected the fans to the splitters connected to the controller. The other option is to connect the cable supplied to the motherboard and then connect the fans to the fan splitters. If you do this then I don"t think you can control the RGB lights as they need to go through the controller.

Once everything was connected I turned pc on to make sure everyting was working then installed the CAM software. The software is intuitive and easy to use. The fan led can by addressed individually however I just went with one colour. There is also RGB lighting on the pump which can also be changed. The temps on idle are between 30-33 degrees. Whilst gaming it"s nornally 40-50 degrees however on certain CPU demanding games it does go higher. Stress testing on Aida 64 the temps were between 65-70 degrees. Temps will vary depending on what CPU you have so my results will likely be different to yours.

The Kraken Z63 RGB is an all-in-one liquid cooler that combines powerful cooling performance with ultimate personalization. The 2.36" LCD screen on the pump shows the content you choose via NZXT CAM software, such as image, animated gif and CAM system information. With dazzling RGB lighting, the Kraken Z63 RGB gives a fantastic look to any build.

The Kraken Z63 RGB is an all-in-one liquid cooler that combines powerful cooling performance with ultimate personalization. The 2.36" LCD screen on the pump shows the content you choose via NZXT CAM software, such as image, animated gif and CAM system information. With dazzling RGB lighting, the Kraken Z63 RGB gives a fantastic look to any build.

Just by using CAM"s elegant user friendly software interface, you can do more than simply customize settings; you can now display your favorite animated gifs or system information, allowing for total customization.

Now that you have multiple CPU cooler with screen designs to choose from, you can express yourself in a way that suits your taste through the Kraken’s new 2.36-inch LCD screen with 24 bit color.

CAM’s software is easy to use, allowing you to manage your computer’s performance and appearance. With simple controls, you can customize your NZXT Kraken Z63 with LCD with ease.

A chamfered intake and fluid dynamic bearings are the best choices for high performance cooling. And without a doubt, radiator fans are an essential part of the liquid-cooling process.

The included Aer P chamfers and fluid dynamic bearings are the perfect choice for high performance NZXT water cooling: quiet, long-lasting, and powerful.

The fully programmable display makes it simple to place the pump where it needs to be, and rotate it without affecting the display orientation or image.

Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. With the fully programmable display, the pump can be rotated to fit the needs of your motherboard without affecting the direction of the logo or image.

The all-new Kraken Z Series lets you personalize your all-in-one liquid cooler like never before. Through CAM’s unique software interface, you can do more than simply fine-tune settings; you can now display your favorite animated gifs or CAM system information, allowing for total customization. Backed by a 6-year warranty, the Kraken Z series provides superior performance in liquid cooling, simple installation, and a look that is uniquely your own.

With a bright, 2.36” LCD screen capable of displaying 24-bit color, you can now completely customize the look of your CPU cooler. Whether it’s a funny gif or CAM data, you can use your Kraken to express yourself in an exciting new way.

CAM’s elegant, user-friendly software makes you the master of your PC. With simple-to-use, intuitive controls, you can manage your Kraken’s performance and appearance with ease.

The included Aer P radiator fans are designed for liquid-cooling perfection. Featuring a chamfered intake and fluid dynamic bearings, they deliver silent operation, long-term reliability, and powerful cooling performance.

Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. With the fully programmable display, the pump can be rotated* to fit the needs of your motherboard without affecting the direction of the logo or image.

The all-new Kraken Z Series lets you personalize your all-in-one liquid cooler like never before. Through CAM’s unique software interface, you can do more than simply fine-tune settings; you can now display your favorite images and animated gifs, or CAM system information, allowing for total customization.

With a bright, 2.36” LCD screen capable of displaying 24-bit color, you can now completely customize the look of your CPU cooler. Whether it’s a funny gif or CAM data, you can use your Kraken to express yourself in an exciting new way.

CAM’s elegant, user-friendly software makes you the master of your PC. With simple-to-use, intuitive controls, you can manage your Kraken’s performance and appearance with ease.

The included Aer P radiator fans are designed for liquid-cooling perfection. Featuring a chamfered intake and fluid dynamic bearings, they deliver silent operation, long-term reliability, and powerful cooling performance.

CUSTOMIZE YOUR BATTLESTATION: With a bright, 2.36” LCD screen capable of displaying 24-bit color, you can now completely customize the look of your CPU cooler

STAY IN CONTROL: CAM’s elegant, user-friendly software makes you the master of your PC with simple-to-use, intuitive controls, you can manage your Kraken’s performance and appearance with ease

INCREDIBLE PERFORMANCE: Featuring a chamfered intake and fluid dynamic bearings, they deliver silent operation, long-term reliability, and powerful cooling performance

SIMPLE INSTALLATION: With the fully programmable display, the pump can be rotated* to fit the needs of your motherboard without affecting the direction of the logo or image

Gather more information about NZXT Kraken Z63 280mm AIO Liquid Cooler and make your mind to purchase it. If you make your mind to do so, then must come back on this website to grab the best discount over this product. You can also have a look on other NZXT products.