nzxt kraken z63 - liquid cooler with lcd display pricelist

I used the mounting bracket which came with my case to install the radiator and fans. The mounting bracket was put in between the radiator and fans and then I put the screws in to hold everything in place. You can also screw the fans directly onto the radiator if you want. Then you just need to mount the fans into your case. I would suggest at this stage to connect the IN & OUT daisy chain cables. I made the mistake of installing into my case first then found it too hard to connect the cables so had to take eveyting back out to connect the cables. You have to connect the IN cable to your first fan and then the OUT into second and so forth. The first fan needs to be connected directly to your controller unless you already have RGB fans then it"s just a case of daist chaining them all together.

I have an intel CPU so I didn"t need to change the bracket on the pump. If you have AMD all you need to do is swap it for the correct bracket. Before you mount the pump you need to connect the correct backplate to the back of your motherboard. Then you mount the pump to the CPU and motherboard. The pump comes with thermal paste pre applied however I used my own.

Next step is to connect the fans to your motherboard. In my case I have the nzxt controller so I just connected the fans to the splitters connected to the controller. The other option is to connect the cable supplied to the motherboard and then connect the fans to the fan splitters. If you do this then I don"t think you can control the RGB lights as they need to go through the controller.

Once everything was connected I turned pc on to make sure everyting was working then installed the CAM software. The software is intuitive and easy to use. The fan led can by addressed individually however I just went with one colour. There is also RGB lighting on the pump which can also be changed. The temps on idle are between 30-33 degrees. Whilst gaming it"s nornally 40-50 degrees however on certain CPU demanding games it does go higher. Stress testing on Aida 64 the temps were between 65-70 degrees. Temps will vary depending on what CPU you have so my results will likely be different to yours.

This All-in-One (AIO) liquid cooler is ready for high performance CPU"s with the ability to fit in most cases. Show CPU/GPU temperatures or customize with GIFs with the Kraken Z LCD display.2.36” LCD screen capable of displaying 24-bit color

This All-in-One (AIO) liquid cooler is ready for high performance CPUs with the ability to fit in most cases. Show CPU/GPU temperatures or customize with GIFs with the Kraken Z LCD display.2.36” LCD screen capable of displaying 24-bit color

The Kraken Z63 RGB is an all-in-one liquid cooler that combines powerful cooling performance with ultimate personalization. The 2.36" LCD screen on the pump shows the content you choose via NZXT CAM software, such as image, animated gif and CAM system information. With dazzling RGB lighting, the Kraken Z63 RGB gives a fantastic look to any build.

{"id":4683172544597,"title":"NZXT Kraken Z73 Liquid AIO CPU Cooler 360mm RL-KRZ73-01","handle":"nzxt-kraken-z73-liquid-aio-cpu-cooler-360mm-rl-krz73-01","description":"\u003cul\u003e\n\u003cli\u003eWater Block Dimensions(LxWxH): 79 x 79 x 52 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Block: Copper, Housing: Plastic\u003c\/li\u003e\n\u003cli\u003ePump Motor Speed \u0026amp; Power: 800 – 2,800 + 300 RPM, 12V DC, 0.3A\u003c\/li\u003e\n\u003cli\u003eRadiator Dimensions: 121 x 394 x 27mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminum\u003c\/li\u003e\n\u003cli\u003eTube Length: 400mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Ultra-low Evaporation Rubber with Nylon Braided Sleeve\u003c\/li\u003e\n\u003cli\u003eCap Display Orientation: Software adjustable Default and -90° orientation\u003c\/li\u003e\n\u003cli\u003eDisplay Panel Active Area: 2.36” (60mm) diameter\u003c\/li\u003e\n\u003cli\u003eDisplay Color: 24-bit true color LCD\u003c\/li\u003e\n\u003cli\u003eDisplay Resolution: 320 x 320 px\u003c\/li\u003e\n\u003cli\u003eDisplay Brightness: 650 cd\/m²\u003c\/li\u003e\n\u003cli\u003eFans Aer P120\u003c\/li\u003e\n\u003cli\u003eQuantity: 3\u003c\/li\u003e\n\u003cli\u003eDimension: 120 x 120 x 26mm\u003c\/li\u003e\n\u003cli\u003eSpeed: 500-2,000 + 300 RPM\u003c\/li\u003e\n\u003cli\u003eAir Flow: 1 8 . 2 8 - 7 3 .1 1 C F M\u003c\/li\u003e\n\u003cli\u003eAir Pressure: 0 .1 8 - 2 . 9 3 m m - H₂O\u003c\/li\u003e\n\u003cli\u003eNoise: 21-36dBA\u003c\/li\u003e\n\u003cli\u003eBearing: Fluid Dynamic Bearing\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 12V DC, 0.32A, 3.84W\u003c\/li\u003e\n\u003cli\u003eConnector: 4-pin PWM\u003c\/li\u003e\n\u003cli\u003eLife: 60,000 hours \/ 6 Years\u003c\/li\u003e\n\u003cli\u003eCompatible Socket \u0026amp; CPU Intel Socket LGA 1200, 1151, 1150, 1155, 1156, 1366, 2011, 2011-3, 2066\u003c\/li\u003e\n\u003cli\u003eIntel Core i9 \/ Core i7 \/ Core i5 \/ Core i3 \/ Pentium \/ Celeron\u003c\/li\u003e\n\u003cli\u003eAMD Socket AM4, sTRX4*, TR4*(*Threadripper bracket not included)\u003c\/li\u003e\n\u003cli\u003eAMD Ryzen 7 \/ Ryzen 5 \/ Ryzen 3 \/ Ryzen 9 \/ Threadripper\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2022-11-03T20:41:55+08:00","created_at":"2020-06-02T02:18:54+08:00","vendor":"NZXT","type":"Cooling Solutions","tags":["AIO","Cooler","Cpu Cooler","Liquid Cooler","Liquid Cooling","Nzxt"],"price":1530000,"price_min":1530000,"price_max":1530000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32394959355989,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"06022004","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"NZXT Kraken Z73 Liquid AIO CPU Cooler 360mm RL-KRZ73-01","public_title":null,"options":["Default Title"],"price":1530000,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2227\/7667\/products\/KrakenZ731.jpg?v=1591035535","\/\/cdn.shopify.com\/s\/files\/1\/2227\/7667\/products\/KrakenZ73.jpg?v=1591035536"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2227\/7667\/products\/KrakenZ731.jpg?v=1591035535","options":["Title"],"media":[{"alt":null,"id":7032589451349,"position":1,"preview_image":{"aspect_ratio":1.0,"height":350,"width":350,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2227\/7667\/products\/KrakenZ731.jpg?v=1591035535"},"aspect_ratio":1.0,"height":350,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2227\/7667\/products\/KrakenZ731.jpg?v=1591035535","width":350},{"alt":null,"id":7032589484117,"position":2,"preview_image":{"aspect_ratio":1.778,"height":720,"width":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2227\/7667\/products\/KrakenZ73.jpg?v=1591035536"},"aspect_ratio":1.778,"height":720,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2227\/7667\/products\/KrakenZ73.jpg?v=1591035536","width":1280}],"content":"\u003cul\u003e\n\u003cli\u003eWater Block Dimensions(LxWxH): 79 x 79 x 52 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Block: Copper, Housing: Plastic\u003c\/li\u003e\n\u003cli\u003ePump Motor Speed \u0026amp; Power: 800 – 2,800 + 300 RPM, 12V DC, 0.3A\u003c\/li\u003e\n\u003cli\u003eRadiator Dimensions: 121 x 394 x 27mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminum\u003c\/li\u003e\n\u003cli\u003eTube Length: 400mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Ultra-low Evaporation Rubber with Nylon Braided Sleeve\u003c\/li\u003e\n\u003cli\u003eCap Display Orientation: Software adjustable Default and -90° orientation\u003c\/li\u003e\n\u003cli\u003eDisplay Panel Active Area: 2.36” (60mm) diameter\u003c\/li\u003e\n\u003cli\u003eDisplay Color: 24-bit true color LCD\u003c\/li\u003e\n\u003cli\u003eDisplay Resolution: 320 x 320 px\u003c\/li\u003e\n\u003cli\u003eDisplay Brightness: 650 cd\/m²\u003c\/li\u003e\n\u003cli\u003eFans Aer P120\u003c\/li\u003e\n\u003cli\u003eQuantity: 3\u003c\/li\u003e\n\u003cli\u003eDimension: 120 x 120 x 26mm\u003c\/li\u003e\n\u003cli\u003eSpeed: 500-2,000 + 300 RPM\u003c\/li\u003e\n\u003cli\u003eAir Flow: 1 8 . 2 8 - 7 3 .1 1 C F M\u003c\/li\u003e\n\u003cli\u003eAir Pressure: 0 .1 8 - 2 . 9 3 m m - H₂O\u003c\/li\u003e\n\u003cli\u003eNoise: 21-36dBA\u003c\/li\u003e\n\u003cli\u003eBearing: Fluid Dynamic Bearing\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 12V DC, 0.32A, 3.84W\u003c\/li\u003e\n\u003cli\u003eConnector: 4-pin PWM\u003c\/li\u003e\n\u003cli\u003eLife: 60,000 hours \/ 6 Years\u003c\/li\u003e\n\u003cli\u003eCompatible Socket \u0026amp; CPU Intel Socket LGA 1200, 1151, 1150, 1155, 1156, 1366, 2011, 2011-3, 2066\u003c\/li\u003e\n\u003cli\u003eIntel Core i9 \/ Core i7 \/ Core i5 \/ Core i3 \/ Pentium \/ Celeron\u003c\/li\u003e\n\u003cli\u003eAMD Socket AM4, sTRX4*, TR4*(*Threadripper bracket not included)\u003c\/li\u003e\n\u003cli\u003eAMD Ryzen 7 \/ Ryzen 5 \/ Ryzen 3 \/ Ryzen 9 \/ Threadripper\u003c\/li\u003e\n\u003c\/ul\u003e"}

To avail a warranty you need to ship the products back to “nextstore.com.kw”; product manuals, instructions and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with the recipient/buyer’s country standards, specifications, and labeling requirements; The recipient/buyer is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from nextstore.com.k, the recipient/buyer is the importer of record and must comply with all laws and regulations of the destination country.

Your privacy is important to us in regards to how information about your order is used and shared. International customers should be aware that cross-border shipments are subject to opening and inspection by customs authorities.

Also, we may provide certain order, shipment, and product information, such as but not limited to titles, for our international carriers, and such information may be communicated by the carriers to customs authorities in order to facilitate customs clearance and comply with local laws.

The above terms also apply to the shipment of any replacement product that might be shipped due to a problem with the original shipment. If you return a product to us, you will be the exporter from the destination country. Title and risk of loss will be transferred to us upon receipt at our end. For additional information please use the "Contact Us" form.

You are responsible for assuring that the product can be lawfully imported to the destination country. When ordering from nextstore.com.kw, the recipient/buyer is the importer of record and must comply with all laws and regulations of the destination country. Orders that are shipped to countries outside the State of Kuwait may be subject to import taxes, customs duties and fees by the destination country’s authorities. The recipient/buyer of an international shipment may be subject to such import taxes, customs duties and fees, which are levied once a shipment reaches your country. Additional charges for customs clearance are only bearable by the recipient/buyer; we have no control over these charges and cannot predict the amount. Customs policies vary from country to country; you should contact your local customs office for further information. When customs clearance procedures are required, it can cause delays beyond our original delivery dates estimated.

You will receive a tracking number once your order is shipped. The shipping method and courier information for your package will be listed in your account and in your shipment confirmation e-mail. Blink will make sure that it will dispatch your package with in the same time frame mentioned under the product purchased. nextstore.com.k will not be responsible for any delay in delivery incurred by the courier service.

Supported processor socketsLGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1366 (Socket B), LGA 2011-v3 (Socket R), LGA 2066, Socket AM4, Socket TR4, Socket sTRX4

Supported processor socketsLGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1366 (Socket B), LGA 2011-v3 (Socket R), LGA 2066, Socket AM4, Socket TR4, Socket sTRX4

These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. They help us to know which pages are the most and least popular and see how visitors move around the site. Most of these cookies collect and process aggregated (anonymized) information without identifying individuals. If you do not allow these cookies we will not know when you have visited our site, and will not be able to monitor its performance.

Just by using CAM"s elegant user friendly software interface, you can do more than simply customize settings; you can now display your favorite animated gifs or system information, allowing for total customization.

Now that you have multiple CPU cooler with screen designs to choose from, you can express yourself in a way that suits your taste through the Kraken’s new 2.36-inch LCD screen with 24 bit color.

CAM’s software is easy to use, allowing you to manage your computer’s performance and appearance. With simple controls, you can customize your NZXT Kraken Z63 with LCD with ease.

A chamfered intake and fluid dynamic bearings are the best choices for high performance cooling. And without a doubt, radiator fans are an essential part of the liquid-cooling process.

The included Aer P chamfers and fluid dynamic bearings are the perfect choice for high performance NZXT water cooling: quiet, long-lasting, and powerful.

The fully programmable display makes it simple to place the pump where it needs to be, and rotate it without affecting the display orientation or image.

Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. With the fully programmable display, the pump can be rotated to fit the needs of your motherboard without affecting the direction of the logo or image.