48v lcd display factory

With years of experience in production ebike display, GREEN PEDEL can supply a wide range of ebike display. ebike display can meet many applications, if you need, please get our online timely service about ebike display. In addition to the product list below, you can also customize your own unique ebike display according to your specific needs.

Even though you can see onlysix (6) main readings on the display, there isfourteen (14) usable functionsyou can access and adjust based on your needs.

Po2 – Km or miles per hour:depending on your location, you can select to display the speed in km (“0” ) or mph (“1”). For this to work properly, you need to set the size of your ebike wheels.

Po3 – Voltage of battery and motor:this is where you will specify the volts of your battery and motor. You can select 24v, 36v and 48v. Normally, the SW900 is set to 36v so make sure you select the right voltage grade.

Po4 – Display sleep mode:this come from zero to 60 mins. In this case, zero means your controller will stay on all the time and if 60 mins, it will shut down after 1 hr of no operation (this will not happen if you are riding your electric bike though).

P06 – Wheel size selection:this is where you establish the size of your wheels in inchs. This is important in order to display the right speed you are traveling.

An intuitive, color display shows you your speed, battery charge, pedal assist level, distance traveled and more. Above that it also allows you to control your ebike"s class rating, integrated lights, and more! Sync to the Aventon app to share your trips with your friends! Even plug in your

We are charger controller factory for both LCD controller and led controller , including low voltage solar controller and high voltage solar controller. Voltage  is available from 12 V to 384 V.