tft lcd reversing camera instructions in stock

One CCD COLOR 700TVL Weather/Water-Proof Wide Angle Vehicle Rear View Camera With Wide View Angle, Video, and Night Vision. Approx. 2.8" width x 3.0" height x 2.6" length (size includes surface-mount attachment).

Weather and Waterproof casing with the rain shield. Please note: The casing is weather and waterproof under normal use only and doesn"t require any further adjustment on your part. However, the cables may not be weather and waterproof. To make proofing enabled, the cable connections will require additional sealing/protection that you must provide. Remember, improper installation and using the product in opposition to the manufacturer"s instructions and the manufacturer"s defined terms and conditions of normal usage may result in damage to the weather/waterproofing properties of the camera.

Reverse image - set to display a reversed camera image on the monitor by default(for vehicle rear viewing to duplicate the normal view seen in a rear-view mirror)

Caution: The camera is designed to operate within a range of constantly changing voltage levels produced by a vehicle"s battery and alternator (post engine ignition) under normal use conditions. Some vehicles have a very high momentary voltage at the vehicle starting time and the excessive voltage generation at that time might cause damage to the camera. If your vehicle tends to emit high voltage levels during ignition you will need to install a fuse/voltage regulator/etc. to protect your camera. Please consult with a professional vehicle audio/video equipment installers if needed.

There is no optimal height for a back-up camera. The ideal height is based off the specific car or vehicle that you have and your personal preferences, along with its intended application. Some back-up cameras are placed on large service trucks so that they can line up to trailer hitches easier, some are to prevent a blindspot on the road. Depending on your application, it can be placed at any height. Most reversing cameras are a "wide view" style and the specific height location does not always affect the way it functions.

The monitor has 2 channels that have RCA inputs and can be toggled between them by either using the button on the screen or the included remote. If you intend to use this screen while you’re driving down the road or changing lanes you can also use this backup monitor as an observation monitor and some have used it as a security screen to view their backup cameras while they"re parked.

Both can be done by using the menu on the top right of the page. The heavy-duty upgrade gives you an even better LCD screen and protects it with a more durable heavy-duty shell, this is very popular with our commercial fleets. The split screen upgrade will convert the monitor to a 4-input screen and will allow you to see all 4 cameras at once (Features other viewing modes as well)

Our iBeam 4.5 inch mirror monitor replaces your vehicles factory rear-view mirror with a full color LCD screen and mirror in one! Connect up to two video inputs – rear-view camera and a second camera feed, to give drivers additional visibility without the use of an additional monitor on the dash. Display is virtually undetectable when switched off revealing a flawless factory-quality mirror. Includes our most widely used windshield mount – with additional options sold separately.

Wiring Instruction Power On / Off GND (Black) Increase Brightness REVERSE (White) Decrease Brightness Video II Input Source Switching Video I Input ACC (Red) Rear Camera Input To Screen DC 12V...