lcd module parallax factory

The Parallax Serial LCDs (liquid crystal displays) can be easily connected to and controlled by a microcontroller using a simple serial protocol sent from a single I/O pin. The LCD displays provide basic text wrapping so that your text looks correct on the display. Full control over all of their advanced LCD features allows you to move the cursor anywhere on the display with a single instruction and turn the display on and off in any configuration. They support visible ASCII characters Dec 32-127). In addition, you may define up to eight of your own custom characters to display anywhere on the LCD. An onboard piezospeaker provides audible output, with full control over tone note, scale and duration using ASCII characters Dec 208–232.

The LCDs currently for sale are updated to Revision F. Basic functionality remains the same, but power requirements and the layout of the backpack have changed. Please see the documentation for information on your model.

This device can be connected to a PC serial port using a MAX232 line driver. The circuit isn’t supported by Parallax, but it’s possible to make this connection with a few extra parts.

Parallax 20 x 4 serial backlit mono LCD display. The Parallax Serial LCDs are very functional, low-cost liquid crystal displays that can be easily interfaced to and controlled by a microcontroller using a I/O pin. Code examples are included for the BASIC Stamp® and Propeller™ chip. The LCD displays provide basic text wrapping so that your text looks correct on the display. Full control over all of their advanced LCD features allows you to move the cursor anywhere on the display with a single instruction and turn the display on and off in any configuration. They support the same visible characters as the BASIC Stamp Editor"s Debug Terminal (ASCII Dec 32-127). In addition, you may define up to eight of your own custom characters to display anywhere on the LCD. Clear 4 line x 20 character display Turn backlighting on or off with a single command Directly supports ASCII DEC characters 32-127 Eight user-definable custom characters Move the cursor anywhere on the display with a single command Baud mode selector and adjustable contrast on the back of the display Power requirement: +5Vdc, 20mA (light off), 80mA (light on) Selectable UART serial baud rates: 2400, 9600, 19200 Dimensions: 60.2 x 98.1mm Operating temp range: -20 to +70°C

And since they support switching electrically between flat display (2D) and three-dimensional display (3D) modes, they can be used in new products optimized for 3D content as well as for applications where conventional LCDs are presently used.

For example, a 3D LCD computer monitor could display word processor and spreadsheet files in the 2D mode while employing the 3D mode for computer graphics and games.

The distance between the human eyes is about 65 mm, and the images seen by the right and left eyes are always slightly different (binocular parallax).

a line of extreme and ultra-narrow bezel LCD displays that provides a video wall solution for demanding requirements of 24x7 mission-critical applications and high ambient light environments

There are many different types of mechanism designs for LCD panels in the market: with metal frame, without metal frame (Black Tape), Open Cell, etc. AMT optical bonding can support all of them. Based on the structure and size of the touch panel and LCD panel, AMT will choose the most suitable thickness of SOCA for lamination. For optical bonding, AMT can provide Lucent Gel in different thicknesses, including 0.5mm, 0.8mm, 1.0mm, 1.2mm, and 1.5mm. If a thicker SOCA is required, we will discuss closely with the customers to fit their needs.

Some LCD panels on the market tend to have a narrow frame design. When the frame of the LCD panel is very narrow with a thicker SOCA, after optical bonding, a bright line at the edge of the active area might be seen when looking at the LCD panel sideways. AMT uses a special process and optical bonding technology to remove the bright line when you look at it sideways.

Some LCD panel bonding is not necessarily bonding a touch panel, it may use just a cover glass or other plastic material to protect the LCD panel. On the other hand, some products are designed with a three-dimensional plastic mechanism, which cannot use the usual flat lamination process. Not to mention the plastic material is easily deformed by the increase of temperature, and the black plastic mechanism absorbs all the light, and bonding material cannot be cured by UV during lamination. AMT optical bonding technology can provide an excellent solution for this kind of design. We have unique optical bonding technology with specially designed bonding jigs and Lucent Gel, which can work with plastic mechanisms or three-dimensional frames. We can also bond glass or other plastic materials to LCD panels.