7.0 40 pin tft display 800x480 with touchscreen for sale

This 7.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in consumer electronics, such as miniature TV"s, GPS"s, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability.

This version has a 4-wire resistive touchscreen attached It"s exactly the same TFT display as PID 2353 but with a resistive touch panel so it is a little more expensive.

This is a "raw pixel-dot-clock" display and does not have an SPI/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a 125-150mA constant-current mode boost converter that can go as high as 9V instead of our other small displays that can run the backlight off of 5V.

For that reason, we are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That"s the best way to interface this display to just about any microcontroller (including Arduino & friends) If you want to control with from an HDMI or DVI output, check out our TFP401 driver board. If you are an advanced electronics enthusiast you can try wiring this directly to your processor, but it we don"t have any support or tutorials for that purpose.

This 7.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in consumer electronics, such as miniature TV"s, GPS"s, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability.

This is a "raw pixel-dot-clock" display and does not have an SPI/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a 125-150mA constant-current mode boost converter that can go as high as 9V instead of our other small displays that can run the backlight off of 5V.

For that reason,we are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That"s the best way to interface this display to just about any microcontroller(including Arduino & friends)If you want to control with from an HDMI or DVI output, check out our TFP401 driver board.

We guarantee your satisfaction on every product we sell with a full refund — and you won’t even need a receipt.* We want you to be satisfied with your Micro Center purchase. However, if you need help or need to return an item, we’re here for you!

*If you are a Micro Center Insider or if you have provided us with validated contact information (name, address, email address), you won’t even need your receipt.

ER-TFT070A2-4 is the updated part number of ER-TFT070-4. It"s 800x480 dots 7" color tft lcd module display with ILI6122 driver ic,optional capacitive touch panel with controller and connector,optional 4-wire resistive touch panel screen with connector,superior display quality,super wide view angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, ARM and Raspberry PI.Equivalent with AT070TN90,AT070TN92.

It can be used in any embedded systems,car,mp4,gps,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface. FPC with zif connector is easily to assemble or remove.

This 7" TFT comes with an HDMI adapter board so it can easily be plugged into a Raspberry Pi or other HDMI system. It boasts a wide operating temperature range, a 16:9 aspect ratio, a transmissive polarizer, and a white LED backlight. This LCD has a 12:00 o"clock viewing direction and the screen is anti-glare.

The touchscreen is connected to a host system via the micro USB connector (we recommend our Short USB cable). The display capabilities are done via HDMI, we recommend our small HDMI to HDMI header for a tight interface with the RPi.

This display requires more power than the Raspberry Pi can reliably supply. We"ve used this additional power supply for powering the backlight when controlling it via a Raspberry Pi.

The resistive touchscreen provides a perfect human interface for your applications. Please note that this device"s touch-screen drivers do not seem to be supported by the Android OS.

Unless expressly agreed otherwise with you, we will not commence delivery of an order until we have received cleared payment of the purchase price in full.

We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only.  All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider.

Note- Please make a note during purchase if you require any item urgently. However we cannot guarantee that we will be able to comply with any request.

*Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Rosanna, 3074 as the "from" address - https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.Shipping Destinations

"This 7.0 TFT screen has lots of pixels, 800x480 to be exact, an LED and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in Consumer Electronics, such as miniature TV & # 39; s, GPS & # 39; s, handheld games car displays... A 40 PIN CONNECTOR HAS 8 Red, 8 Green and 8 blue parallel pins, for 24 bit color capability.

This version has a 4 wire resistive touchscreen attached it & # 39; s exactly the same TFT display as PID 2353 but with a resistive touch panel so it is a little more expensive.

"This is a" raw pixels dot clock screen and does not have to SPI/parallel type controller or any kind of RAM. The screen is supposed to be constantly refreshed, at 60 Hz, with a pixel clock, V sync, H sync, etc There are some high end processors such as that used in the Beagle Bone That Can natively support such RGB TTL your display. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as on FPGA. Not only that, but the backlight Requires a 125 150mA constant current fashion boost converter that can go as high as 9 V instead of our other small displays that can run the backlight off of 5 V.

For that reason, we are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That & # 39; s the best way to interface this display to just about any microcontroller (including Arduino & Friends) if you want to control with from an HDMI or DVI output, check out our TFP401 driver board. If you are an advanced electronics enthusiast you can try wiring this directly to your processor, but it we don & # 39; t have any support or tutorials for that purpose.

KWH070KQ38-F04 V.2 is 7 inch LCD Display With Resistive Touch Screen with 800x480 resolution.It can be used for embedded systems, automation, GPS, medical equipment, industrial device and security equipment, etc.It is equipmed with RGB data signal interface. You also can use it with HDMI LCD Controller Board.

desertcart is the best online shopping platform where you can buy Adafruit 7.0" 40-pin TFT Display - 800x480 with Touchscreen [ADA2354] from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the Adafruit 7.0" 40-pin TFT Display - 800x480 with Touchscreen [ADA2354] to and more cities in Bahamas. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Adafruit 7.0" 40-pin TFT Display - 800x480 with Touchscreen [ADA2354] speedily without the hassle of shipping, customs or duties.

desertcart buys Adafruit 7.0" 40-pin TFT Display - 800x480 with Touchscreen [ADA2354] directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy Adafruit 7.0" 40-pin TFT Display - 800x480 with Touchscreen [ADA2354] from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.