optical viewfinder for 3.2 lcd displays in stock

The HoodLoupe Optical Viewfinder for 3.2" LCD Displays is used to make a close inspection of images as you review them on your DSLR camera"s LCD monitor. The viewfinder isolates the display from ambient light so you will not be distracted by reflections or shadows during use. It will provide full coverage of an LCD monitor up to 3.2" diagonally with a standard (3:2) aspect ratio.

This HoodLoupe is designed to fit the 3.2" LCD monitors of larger DSLR cameras, with a 1:1 magnification ratio. With the same 3:2 aspect ratio as your camera"s LCD, the HoodLoupe allows more of the screen to be used for photo and video display so you can clearly see what you"re shooting without the reflections and glare caused by ambient light.

The lanyard fits around your neck and has a quick-release fastener that allows you to easily remove it. It also comes with a protective carrying case for safe and easy storage, with a built-in belt clip for convenient carrying while on the job.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

When you already own a newer HoodLoupe model with inter-changeable bases and your base is sized for 3.0 inch LCD screens; the H32B base mounts is what you need to fit up to 3.2" LCD screens. The HoodLoupe optical module is placed over the base with the latches snapped into the locking position. You can easily switch between mounting bases to accommodate the LCD screen size you will be viewing for the day. The base integrates with all Hoodman live view mounting plates.

The LCDVF3C 3.2" LCD Viewfinder for Canon DSLR Cameras from Kinotehnik is an optical viewfinder used to shoot either photos or videos with better camera control, and view of 3.2" LCDs. It is an essential accessory that enables photographers to take advantage of the HD video features of Canon"s EOS 5D Mark III, Mark IV, and EOS-1D X DSLR cameras.

At the heart of the LCDVF3C is an achromatic lens pair that consists of two optical components vacuum-cemented together to form a lens which is computer optimized to correct for chromatic aberrations. Its magnetic interface allows rapid mounting and removal without any wear and tear on the camera. All you need to do is apply the adhesive-covered thin metal frame to your camera body and from then on, it"s a simple click-on / click-off solution to attach and remove the viewfinder.

The quality construction and seals of the viewfinder are resistant to splashes of water and dust when attached to the back of the camera, keeping your view of the LCD clean and dust free

The Z-Finder Pro 2.5x for 3.2” screens is our standard Z-Finder Pro 2.5x packaged with a Z-Finder 3.2” Mounting Frame for Small Body DSLRs. This frame is compatible with small body cameras with 3.2” screens like the Canon 5D Mark IV and Mark III and the Nikon D800. This is not a new Z-finder.

The Z-Finder Pro 2.5x for 3.2” screens is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 2.5x for 3.2” screens comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3.2” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.

The 2.5x magnification is recommended in particular for users who are near sighted and may have problems seeing long distances. The Z-Finder Pro 2.5x for 3.2” screens has a diopter range of -4.75 and up (unlimited with extender frames). This is the model we use with our electronic viewfinder packages.

The Z-Finder Pro attaches to your camera with the included Gorilla Plate V2 and Z-Finder 3.2" Mounting Frame for Small DSLR Bodies. (The Z-Finder Mounting Frame can also be attached to our Mini DSLR Baseplate. ) The Gorilla Plate V2 attaches to the bottom of your camera using a ¼ 20” screw and has ¼ 20” screw holes underneath to attach a tripod plate. The metal Z-Finder Mounting Frame attaches to the Gorilla Baseplate using the provided red thumb screws. The Z-finder itself pops on and off the Z-finder Mounting frame. No magnets or glue are used. The metal Z-Finder Mounting Frame is backed with rubber to prevent scratching or slippage. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release.

1. All Z-finder bodies are the same size and can fit on any of our frames. The Z-Finder Pro 2.5x for 3.2” screens comes standard with a 3.2” Z-Finder Mounting Frame for Small DSLR Bodies. That will fit a standard small body DSLR with a 3.2” screen like the Canon 5D MIII or Nikon D800/600. Any other frames need to be purchased in addition to the Z-Finder. You can find a la carte frames for tall cameras, battery grips, 3” LCD screens, and our adhesive frame here. You can find a Z-finder Pro 2.5x packaged with a mounting frame for small body DSLRs with 3” LCD screens (Canon 5D MII/7D/550D, Nikon D5100/3000) here.

2. The tapped holes on the bottom of the Gorilla Plate V2 are offset from the center of the lens for use with some of our equipment. This is only a concern if you are using the Gorilla plate with other rigs that do not have side to side movement and need the matte box in line with the lens/mounting screw hole. To compensate for this issue, you can either use an adhesive mounting frame to attach the Z-finder or add a Gorilla Plate Adapter to your plate. Our Gorilla Plate Adapter centers the tripod holes on the bottom of the gorilla plate. Please note that this adapter does come with a longer 1/4 20" screw that will replace the smaller 1/4 20" screw that comes with the Gorilla Plate. You will need to take your screw out and use the longer one provided with the adapter to attach your camera to the plate.

3. In order for the Gorilla Plate and mounting frame to correctly align with the LCD screen the plate needs to be directly underneath your camera. This means it cannot be used in combination with L brackets like Really Right Stuff or camera specific contour plates like Arca Swiss. You can use an adhesive frame on your camera with our Z-finder and continue using your camera specific plates as usual.

LCDVF 3C is the missing link of the hybrid “photovideography” era. It is an essential accessory that enables today’s photographers to take advantage of the video features of the new generation DSLR cameras. It’s like viewing a 42″ screen from 140cm.

In the heart of the LCDVF is an achromatic lens pair that consist of two optical components vacuum-cemented together to form an achromatic doublet which is computer optimised to correct for on-axis spherical and chromatic aberrations.

The viewfinder has a magnetic mounting interface which allows rapid mounting and demounting without any wear and tear. There are 4 small magnets embedded in the plastic skirt of the LCDVF 3C which will not damage your camera.

The Z-Finder Pro 2.5x for 3.2” screens is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder w...

The Z-Finder Pro 2.5x is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the L...

The Zacuto Sony FX6 Z-Finder is specifically designed to suit the shape and size of the monitor included with the Sony FX6. It is the same optical ...

The Sony FX6 Shoulder Mounting Kit upgrades your Sony FX6 Z-Finder to be able to mount it to your Sony FX6 camera comfortably for shoulder mounted ...

The Canon Z-Finder is an optical viewfinder, specifically designed to attach to the Canon LM-V2 4.3" LCD Monitor compatible with the Canon C300 Mar...

The Canon C200 Z-Finder is an optical viewfinder, specifically designed to attach to the Canon LM-V1 4" LCD Monitor compatible with the Canon C200 ...

The C300/500 Z-Finder is an optical viewfinder, specifically designed to attach to the Canon C300 and C500 cinema camera’s LCD screen. This Z-Finde...

The C300/500 Z-Finder is an optical viewfinder, specifically designed to attach to the Canon C300, C300 Mark II, and C500 cinema camera’s LCD scree...

The Mounting Kit for the C300/C500 Z-Finder allows you to position the LCD screen forward and off the the side in a position to better enable shoul...

The Z-Finder 3.2" Mounting Frame for Small DSLR Bodies with Battery Grips is for use with the DSLR Gorilla plate in  order to attach a Zacuto Z-Fin...

The Z-Finder 3" Mounting Frame for Small DSLR Bodies with Battery Grips is for use with the DSLR Gorilla plate  in order to attach a Zacuto Z-Finde...

The Z-Finder 3.2" Mounting Frame for Small DSLR Bodies is for use with the DSLR Gorilla plate in order to attach a Zacuto Z-Finder to your camera L...

The Z-Finder 3" Mounting Frame for Small DSLR Bodies is for use with the DSLR Gorilla plate V2 in order to attach a Zacuto Z-Finder to your camera ...

The Auto Closing Eyecup includes one rubber eyecup with an automatically closing flap. Great for preventing sun burns to your LCD or Micro OLED! Th...

The LCD Axis Adapter converts your Sony FS5, Sony FX6 or Panasonic EVA1 Z-Finder to a rosette mount to be able to use it with our Rosette based EVF...

MRC8 CREDIT FILTER: Uniformly applied MRC8 to eliminate unwanted glare and ghosting which easily get’s compounded at long exposures. Our MRC8 is structurally harder than the glass itself, providing a protective scratch-resistant layer, shielding the glass from the elements of frequent fieldwork | X2 ND (NEUTRAL DENSITY) FILTER: Our X2 ND 10-stop features critically sharp H-K9L optical glass made in Japan. The moment you pick up X2 ND you’ll immediately feel the craftsmanship and quality. We precisely machine each X2 traction frame from environmentally friendly aluminum, and with it’s matte black finish reflections are absorbed rather than reflected into the lens barrel. | NANOTEC: In addition to state-of-the-art MRC8, our optical engineers developed new nano coating layer technology, called nanotec, from the ground up to repel dirt, water and other elements by beading rather than absorbing and smearing. Set in our completely weather-sealed X2 traction frame the X2 ND was built to withstand the harshest of environmental conditions. | FITMENT: Compatible with all 49mm camera lenses. Your lens thread size will be printed underneath your lens cap or written somewhere on the lens barrel. Make sure you order the correct size otherwise it will not fit your lens. | 25 YEARS SUPPORT: Guaranteed to be free from craftsmanship defects for 25 years. When you activate your 25 Year Ironclad Guarantee online we associate your X2 serial number to you, so any future discussions on this unique filter are tracked, issues recorded and all that stuff which goes into future product design.