1.54inch tft display in stock

Touch screen monitors and touchscreen displays are everywhere. Just look around and you"ll notice a 1.54 inch square tft lcd display 320x320 or an LCD display within close proximity to you, (most likely, in the form of a smartphone).

An 1.54 inch square tft lcd display 320x320, or liquid crystal display touch screen, is a display that can recognize a user"s touch through either resistive or capacitive sensing. This technology is probably one of the greatest technological innovations to hit the consumer market and is now an essential element of popular devices and brands across the globe. Thin film transistor (TFT) touch screens and displays have also improved consumer electronics and made this tech more accessible to everyday users.

A TFT touch screen combines the fundamental elements of a 1.54 inch square tft lcd display 320x320 with the advanced imagery TFT technology. These are the variants of 1.54 inch square tft lcd display 320x320 displays that most consumers see and use on a daily basis. While TFT displays use more energy than standard monochrome LCD displays, many models provide brighter and more detailed visuals than conventional screens.

As a popular technology that is now embedded in numerous devices, demand for touch screen LCD displays and related accessories like touch screen controllers is likely to grow. If you"re looking to sell to consumers, retailers, or other businesses, then Alibaba.com is a great choice to source wholesale monitors in bulk.

This display module features high resolution, low power consumption, wide-angle and easy wiring. With a small size of 1.54”, it offers 240x240 resolution. The module employs the IPS screen, which performs excellently in the view angle (80/80/80/80). It supports SPI(4-wire) communication mode and GDI port (work with main-controllers with GDI port), plug, and play. This product can be used in many display applications: waveform monitor display, electronic gift box, electronic weather decorations, etc.

The 1.54” LCD module can be powered by 3.3V~5V, and the maximum power consumption is about 24Ma. It is compatible with multiple main-controllers like UNO, Leonardo, ESP32, ESP8266, FireBeetle M0, etc. When working with M0, the GDI interface should be used, which could effectively reduce wiring steps. Besides, there is an onboard MicroSD card slot for displaying more pictures.

If none of these part numbers meet your requirements in terms of brightness, interface, or connection method, please email us at info@orientdisplay.com.

This is a 240 X 240 pixels TFT display module, with a 1.5inch small size it could be a good fit for small size projects like wearable, IoT or portable devices. The display’s driver IC is ST7789, which you can find many libraries to quickly start with. We’ve tested the display with Adafruit’s library, it works quite well.

The Display interface is SPI, and operating and logic voltage is 3.3V, so it is OK to connect directly with a 3.3V controller board. If you need to make it work with 5V MCU, remember to use a level translator between the display and the controller board.

{"specs":[],"skus":[{"id":6499,"useViewType":false,"productId":258,"templateId":1,"code":"","name":"1.54 inch touch screen, for 1.54 inch e-paper display","stock":0,"price":0.00,"retailPrice":0.00,"weight":0.00,"status":"1","isDefault":"1","createDate":"2023-02-16 10:58:15","updateDate":"2023-02-16 10:58:15","productSkuSpecs":[],"skuId":0}],"specConfs":[]}

It"s only 1.5" diagonal but has a high density 220 ppi, 240x240 pixel display with full-angle viewing. It looks a lot like our 1.44" 128x128 display, but has 4x as many pixels and looks great at any angle. We"ve seen displays of this caliber used in smartwatches and small electronic devices but they"ve always been MIPI interface. Finally, Adafruit found one that is SPI and has a friendly display driver, so it works with any and all microcontrollers or microcomputers!

This lovely little display breakout is the best way to add a small, colorful and very bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.54" display has 240x240 16-bit full color pixels and is an IPS display, so the color looks great up to 80 degrees off axis in any direction. The TFT driver (ST7789) is very similar to the popular ST7735, and our Arduino library supports it well.

Our breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included.