iic i2c twi spi 1602 lcd module port for arduino for sale

This is a I2C Serial LCD Daughter board that can be connected to a standard 16×2 or 20×4 Character Display Module that supports 4-bit mode. All Character Modules sold on our site support 4-bit mode, and nearly all commercially available 16×2 and 20×4 line character modules support it too. This board has a PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on the internet for using this board with Arduino. Do a search for “Arduino LCD PCF8574“. The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one it’s own address).

{"id":1734089769018,"title":"IIC\/I2C\/TWI\/SPI Serial Interface Board Module Port for Arduino UNO R3 LCD1602 2004 Display","handle":"5pcs-iic-i2c-twi-spi-serial-interface-board-module-port-for-arduino-uno-r3-lcd1602-2004-display","description":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eCome with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe backlight and contrast is adjusted by potentiometer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eI2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eCompatible for 1602 LCD 2004 LCD\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupply voltage: 5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt is fantastic for Arduino based project.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eThis is another great IIC\/I2C\/TWI\/SPI Serial Interface.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAs the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you already has I2C devices in your project, this LCD module actually cost no more resources at all. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1PCS*IIC I2C Adapter Serial Interface Board Module\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-19T17:19:31+08:00","created_at":"2018-07-19T17:26:33+08:00","vendor":"diymore","type":"Interface Module","tags":["Arduino","Display","Shield","UNO R3"],"price":399,"price_min":399,"price_max":799,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32645185273927,"title":"1pcs","option1":"1pcs","option2":null,"option3":null,"sku":"010001","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"IIC\/I2C\/TWI\/SPI Serial Interface Board Module Port for Arduino UNO R3 LCD1602 2004 Display - 1pcs","public_title":"1pcs","options":["1pcs"],"price":399,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32645185306695,"title":"5pcs","option1":"5pcs","option2":null,"option3":null,"sku":"0100015","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"IIC\/I2C\/TWI\/SPI Serial Interface Board Module Port for Arduino UNO R3 LCD1602 2004 Display - 5pcs","public_title":"5pcs","options":["5pcs"],"price":799,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_1_373.jpg?v=1588645179","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_2_938.jpg?v=1588645179","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_3_893.jpg?v=1588645179","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_4_653.jpg?v=1588645179"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_1_373.jpg?v=1588645179","options":["Size"],"media":[{"alt":"Iic\/i2C\/twi\/spi Serial Interface Board Module Port For Arduino Uno R3 Lcd1602 2004 Display","id":6678393356359,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_1_373.jpg?v=1588645179"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_1_373.jpg?v=1588645179","width":1000},{"alt":"Iic\/i2C\/twi\/spi Serial Interface Board Module Port For Arduino Uno R3 Lcd1602 2004 Display","id":6678393487431,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_2_938.jpg?v=1588645179"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_2_938.jpg?v=1588645179","width":1000},{"alt":"Iic\/i2C\/twi\/spi Serial Interface Board Module Port For Arduino Uno R3 Lcd1602 2004 Display","id":6678393618503,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_3_893.jpg?v=1588645179"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_3_893.jpg?v=1588645179","width":1000},{"alt":"Iic\/i2C\/twi\/spi Serial Interface Board Module Port For Arduino Uno R3 Lcd1602 2004 Display","id":6678393782343,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_4_653.jpg?v=1588645179"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/010001_4_653.jpg?v=1588645179","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eCome with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe backlight and contrast is adjusted by potentiometer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eI2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eCompatible for 1602 LCD 2004 LCD\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupply voltage: 5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt is fantastic for Arduino based project.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eThis is another great IIC\/I2C\/TWI\/SPI Serial Interface.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAs the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you already has I2C devices in your project, this LCD module actually cost no more resources at all. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1PCS*IIC I2C Adapter Serial Interface Board Module\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}

This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of for Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.

This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.

This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for based project.

This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for based project.

This 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight. It also includes a serial I2C/IIC adaptor board pre-soldered to the back of the LCD. This means it can be controlled with just 2 I2C serial data pins (SDA & SCL) and so requires far less digital IO pins when controlled from a microcontroller. In total the module only requires 4 wires including 5V power and GND. Contrast adjustment is also provided by the daughter board via a potentiometer. If you plan to use this with an Arduino board you can download a compatible library and example sketch from our support forum

These modules are currently supplied with a default I2C address of either 0x27 or 0x3F. To determine which version you have check the black I2C adaptor board on the underside of the module. If there a 3 sets of pads labelled A0, A1, & A2 then the default address will be 0x3F. If there are no pads the default address will be 0x27.

If pressure is applied to the I2C daughter board it is possible for it to bend and come contact with the LCD module. Please ensure when the LCD is installed in your application that no external object is applying pressure to the back of the module.

All orders are processedwithin 24 hoursafter they are placed. Usually, we are able to ship orders the next day. Weekend orders are shipped on the following Monday. You will receive a shipping confirmation email from our system when the shipping information has been uploaded.

Austria, Belgium, Czechia, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Lithuania, Luxembourg, Monaco, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom, etc.

Easy Peasy! Log into your account through the online store, check out the fulfilment status against your recent order. If the order has been fulfilled, click onto the order information & you can find your tracking information here.

Such as the products you buy on our site - can"t simply be shipped freely from country to country. When goods are imported into a different country or customs territory, there is a charge called Customs Duty that must apply. This is charged by the local customs authority where the goods are being imported into.

If Customs Duty is payable to your territory, you"ll be responsible for paying it to the authorities, so SunFounder isn"t involved in this process. Whether Customs Duty is payable, and by how much, depends on a whole lot of different things. For example, many countries have a "low value threshold" below which they do not charge any Customs Duty.

If you do have to pay Customs Duty though, the amount payable is usually calculated based on the value of the goods and the type of goods being imported.

If, for whatever reason, you refuse the customs fee and the parcel is returned back to us. If you"re still unsure on whether you"ll be subject to customs fees, we recommend contacting your local customs office for more info before placing your order!

IIC I2C Serial Interface Board Module LCD1602 Address ChangeableArduino 1602/2004 I2C Interface 4-Wire 1602/2004 screenArduino IIC/I2C Interface LCD1602/2004 adapter plate without LCD screenArduino control board IO port is only 20, plus some sensor, SD card Han, relay modules and more, IO port is not enough,The original 1602/2004 screen requires 7 IO port can drive up, we have developed this module can help you save five IO ports, we send arduino libraryProduct parameters:1. Dimensions: 41.5mm (length) * 19mm (W) * 15.3mm (height)2. Weight: 5g3. PCB Color: Black4. Supply Voltage :2.5-6V5. Supports the I2C protocol6. With backlight power control, can be connected via jumper settings are backlight power. Plug the jumper to connect the backlight off, unplug the jumper to disconnect the backlight power7. Contrast can be adjusted by turning the blue potentiometer clockwise increase, counterclockwise weakened. Potentiometer design on the front, enabling customers to freely adjust anytime8. Modules can be cascaded to cascade up to eight. By short-circuiting A0/A1/A2 modify the device address. The default address is 0x27.Note: Please contact us if you need the Schematic and Datasheet.