sharp memory lcd module supplier

Sharp’s Memory LCD is the perfect solution for compact handheld, wearable, and other small-screen applications. Embedded, 1-bit memory in every pixel allows for an always-on display capable of delivering high-contrast, high-resolution content with ultra-low power consumption. A lightweight, two-glass design plus an integrated driver in the panel provides an exceptionally thin module. Incorporating the Memory LCD into a design is simple with 3-wire SPI serial interface (SI, SCS, SCK).

Sharp memory lcd is one of the most widely used mobile phones. As it"s clear from the image, sharp memory lcd is easy to find and with new functions, it can be used for smart phones, and more. Tinted glass is a transparent, tinted glass- and, to prevent the damage from the degrading color the sharpness lcd is one of the widely used online cameras.

Sharp memory lCD is available in a variety of colors, such as crystal, clear glass, and plastic. With all the colors of Alibaba.com, sharp memory lcd provide a easy-to- install option and have a different range of colors.

The Adafruit 2.7" 400x240 SHARP Memory Display Breakout is a chonky cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD.

This model has a gray background, and the pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For dark/nighttime reading you may need to illuminate the LCD area with external LEDs.

Sharp Memory LCDs are high pixel density, low power displays that don"t need backlights. They draw in the region of 100uA while idle, so are perfect for always-on, battery-powered applications.

Espruino toggles the VCOM pin (if specified) every 5 seconds. Sharp recommend 1 second but the longer time period allows Espruino to enter Deep Sleep and save a lot of power.

Our friends over at Adafruit have made this nifty, little breakout using one of SHARP"s silver monochrome memory displays. This little board houses a 1.3", 96x96 screen that performs similarly to an e-paper display with its ultra-low power usage and an LCD with its fast-refresh rates. The SHARP Memory Display does not include a backlight and is readable in daylight but you may need a little assistance reading it in the dark with an external light source.

Sharp"s Memory-in-Pixel LCDs are the perfect solution for compact handheld, wearable, and other small-screen applications that require a battery. Choose from multiple sizes in 64-color, plus monochrome.

Consumers and device manufacturers demand low power consumption for long battery life and high resolution from their mobile displays. Sharp LCDs deliver, with a broad range of models and resolutions including HD720, FHD, WQHD, and even 4k2k for brilliant and immersive mobile experiences.

This unparalleled performance comes from research and development, combined with the manufacturing facilities needed to bring new technologies to market. Take for instance Sharp’s revolutionary new approach to touch displays, in-cell touch technology. Now being produced in the Mie Plant No. 3 as LTPS (CG silicon) and IGZO panels, these new displays integrate touch circuitry and LCD drivers into the LCD module itself. Without a separate touch layer required, displays – and devices – can now become even thinner.

The Sharp® 128x128 Memory LCD and microSD Card TI BoosterPack Plug-in Module is based on the LS013B7DH03 super low power TFT display panel from Sharp Electronics and also features a microSD card expansion slot. Both the LCD and SD card can be controlled using the serial peripheral interface (SPI). TI MCU LaunchPad Evaluation Kit developers can use this BoosterPack to display sensor readings, time, graphics, or other information using the LCD’s 128x128 pixels as well as to expand embedded applications with SD card read/write capabilities.