sharp memory lcd module for sale

This is a simple breakout board for Sharp"s new Memory LCD displays ( LS013B4DN02,LS013B4DN04, LS013B7DH03 as well as LS027B7DH01). It brings all pins to a 0.1" header and provides necessary caps and resistors. The new revision A2 also adds an optional boost converter for those wanting to run 5V display from sub 3.3V supply. The footprints are there, but parts are not populated to save cost. This is an open source hardware design under CC BY SA license. The display is not included as there are now several types of them, and depending on your needs you would be using a 5V or a 3.3V version or even the larger 2.7" version. Contact me and I"ll point you to a source of displays.

The Adafruit 2.7" 400x240 SHARP Memory Display Breakout is a chonky cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a gray background, and the pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For dark/nighttime reading you may need to illuminate the LCD area with external LEDs.

The 1.3" 168x144 SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a gray background, and pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For dark/night reading you may need to illuminate the LCD area with external LEDs.

Our friends over at Adafruit have made this nifty, little breakout using one of SHARP"s silver monochrome memory displays. This little board houses a 1.3", 96x96 screen that performs similarly to an e-paper display with its ultra-low power usage and an LCD with its fast-refresh rates. The SHARP Memory Display does not include a backlight and is readable in daylight but you may need a little assistance reading it in the dark with an external light source.

The Sharp® 128x128 Memory LCD and microSD Card TI BoosterPack Plug-in Module is based on the LS013B7DH03 super low power TFT display panel from Sharp Electronics and also features a microSD card expansion slot. Both the LCD and SD card can be controlled using the serial peripheral interface (SPI). TI MCU LaunchPad Evaluation Kit developers can use this BoosterPack to display sensor readings, time, graphics, or other information using the LCD’s 128x128 pixels as well as to expand embedded applications with SD card read/write capabilities.

The Adafruit 2.7" 400x240 SHARP Memory Display Breakout is a chonky cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a gray background, and the pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For dark/nighttime reading you may need to illuminate the LCD area with external LEDs.

Traditional graphic display module solutions include bi-stable, cholesteric, and STN technologies. These present a variety of design and performance issues, including high driving voltages, slow response time, image retention, complicated interfaces, and others.

The Memory LCD combines matrix technology with a one-bit memory circuit embedded into every pixel, ensuring information retention upon its writing. This allows the design of products with ultra-low power consumption and extended battery life. It also delivers higher resolution, shock and temperature tolerance than e-paper (electronic paper) displays.

The 1.3" 168x144 SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a gray background, and pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For dark/night reading you may need to illuminate the LCD area with external LEDs.