fix danby silouhette lcd panel quotation

I own a 2012 Danby silhouette dbc2760bls wine fridge that was working great until one night I had to manually shutoff the circuit breaker that the fridge was plugged into. When I turned the breaker back on the fridge did not turn on (there is power coming from the original plug and I have plugged it into many working outlets with no luck.   If anyone has any ideas on if this is something that might be an easy fix to at least try before calling a repair place I would greatly appreciate it..

If your Danby wine cooler isn"t cooling we"re here to help! Usually there"s a few common causes that can be fixed so you can get yourwine fridgeback to perfect health again!

Fear not, your wine collection is OK for days or even weeks outside of a perfectly controlled temperature environment (unless it"s VERY hot or cold) but we want to help you to fix the problem fast so you can get back to enjoying your wine collection again.

Your wine cooler is probably not cooling due to one (or a combination) of the following issues with: the power supply, thermostat, external heat sources (oven), a ventilation blockage, lack of airflow, a fan problem or the door. If after all our advice you still haven"t identified / fixed the problem it"s best to contact the Danby technical support team.

Switch the unit OFF and ON. If the fridge doesn"t light up there"s probably a major issue with the mains power or the PSU circuit board in the product (that"ll likely need replacing if it"s faulty). If that"s the case you"ll need to seek the help of Danby directly or a qualified refrigeration technician.

If the the Danby wine fridge thermostat is working correctly it"s responsible for making the condenser, evaporator, fan and compressor work - so it"s super important!

A quick check you can make is to ensure the Danby wine cooler is not near a sunny spot or heat source which can wreak havoc with the internal temperature regulation linked directly back to the thermostat.

If it"s abuilt in wine coolerthe front air vent grille should not be blocked under any circumstances- check air is flowing into the vent using your hand - you should feel a draft. If there is a blockage or the vent is obstructed, freeing the vent should fix the cooling issue.

The door seal maybe broken or poorly positioned. You may be able to easily repair or reposition the seal or get a new seal fitted - which can usually be supplier or purchased via Danby.

Finally, if none of the above points resolve the cooling issue thencontact a local refrigeration engineer or the Danby manufacturer helpline. The problem and fix can then be identified during a repair visit. This maybe included as part of your products warranty but you"ll need to check this with the manufacturer, Danby.

I have two Danby Silhouette Wine Coolers that came with my house when I purchased it. I live in a townhome complex and the builder used these same wine coolers in all of our units. They all have stopped working (8 in total). My neighbors have replaced theirs but I am determined to find a solution to repair mine. It seems such a waste for a big machine to stop working and not have a repair. I have had a Danby recommended repair company come out to look at them but they said the unit is discontinued and they can not get the parts any more. It really is such a shame to waste so many $1200 units. I would greatly appreciate any assistance this wonderful community can provide and help me find a way to save these beautiful coolers.

What should my next steps be? I am located in Houston, TX if anyone is located here I would love the opportunity to pay for your help in fixing these two units.

If you have purchased a dehumidifier manufactured by GD Midea on behalf of Danby, please visit this website or call 1-800-600-3055 to determine if your unit is affected. Depending on the age of your unit, GD Midea will provide a partial refund or replacement unit to purchasers of these dehumidifiers in exchange for consumers taking these products out of service.

Your favorite white or red wines will have a fine home in this superior free-standing wine cooler designed to cool up to 36 bottles of wine. Danby’s 3.2 cu. ft. wine chiller is a stylish and sophisticated addition to your kitchen, bar, restaurant, or café. The bright LED interior-light display is perfect for showmanship, ensuring you can find the next bottle you’ll indulge in easily. Your wine collection is well protected due to the attractive shatter-resistant tempered glass door trimmed in platinum. Features include a convenient automatic-defrosting system and five removable strong black storage shelves. In addition, the thermostat allows you to easily program and maintain the internal temperature anywhere between 42.8°F – 57.2°F (6°C – 14°C). Plus, it comes with a reversible door swing allowing you to open it from the left or right-hand side depending on your preference.

I have two Danby Silhouette Wine Coolers that came with my house when I purchased it. I live in a townhome complex and the builder used these same wine coolers in all of our units. They all have stopped working (8 in total). My neighbors have replaced theirs but I am determined to find a solution to repair mine. It seems such a waste for a big machine to stop working and not have a repair. I have had a Danby recommended repair company come out to look at them but they said the unit is discontinued and they can not get the parts any more. It really is such a shame to waste so many $1200 units. I would greatly appreciate any assistance this wonderful community can provide and help me find a way to save these beautiful coolers.

What should my next steps be? I am located in Houston, TX if anyone is located here I would love the opportunity to pay for your help in fixing these two units.

Beverage Factory is an Authorized Danby Dealer, which means you will receive the full support of both companies should you need it. For more information about Authorized Dealers and questions about Danby products, please call 1-800-710-9939.

Ready, set, relax. Danby"s SPRBC031D1SS model offers luxurious beverage chilling in a slim 15" of width and 3.1 cubic feet of storage. This compact beverage center won"t demand too much space and brightens up your interior surroundings with a crystal clear beverage display. The flush fit integrated stainless steel refrigerator cabinet will blend into your cabinet-flanked nooks and alcoves, keeping your beverages as supremely cool as it looks.

This beverage center boasts a cutting-edge temperature management system. Superior fan-forced cooling removes the risks of interior climate fluctuations and inconsistencies, while the advanced airflow system efficiently dissipates heat to considerably improve the longevity of the cooling system.The purest level of refreshment has been perfected in this refrigeration center. Unique technology consistently preserves your beverages at 36° F, which is the ideal temperature to serve drinks to family and friends. Temperature can be individually adjusted using a digital control panel, allowing you to set the temperature as low as 36°F or as high as 64°F depending on your storage needs.

After a thorough analysis, Danby reimagined the interior liner of their wine and beverage models. Unlike the competition, who merely place interior rails into an existing liner, their liner has been designed with extruded rails to securely mount their new floating shelves. The liner has been redesigned to minimize strain on the shelf system, create less friction, and extend the life of the ball bearing tracks. Their Prowave integrated wine storage system safeguards larger bottles. Most importantly, the innovative design has set the stage for further development of future generations.