5 inch tft display datasheet manufacturer

Have your product stand out with the DT050ATFT display - our 5” TFT LCD module with full viewing angle. The full viewing angle feature allows the display contents of the LCD to be visible from practically any angle. It"s a cost-effective enhancement compared to using an IPS display. The 5" TFT has 800 x 480 RGB resolution and supports 24-bit parallel RGB input mode. The LCD uses two driver ICs to drive the display: a source driver with TCON (Ilitek ILI6122) and a gate driver (Ilitek ILI5960). It also is available with either a resistive touchscreen or capacitive touchscreen panel. This 5 inch LCD is an ideal option for a variety of digital devices including video or POS systems.

ER-TFTM050-3 is 800x480 dots 5" color tft lcd module display with RA8875 controller board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 8080 6800 8-bit,16-bit parallel,3-wire,4-wire,I2C serial spi interface. Built-in MicroSD card slot. It"s optional for 4-wire resistive touch panel (IC RA8875 built-in touch controller),capacitive touch panel with controller,font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable.Mounting on board by default. There is no capacitive touch panel connection on the board of ER-TFTM050-3,its capacitive touch panel needs to be connected with your external board.Now we design another new board with capacitive touch connection named_ER-TFTM050A2-3.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for5" TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

VIS050IPS03T is an LCD panel module model that adopts a 5 inch IPS type LCD with 800*480 resolution. CTP (Capacity Touch Panel) and CG(Cover Glass) can be added according to user requirements. Based on the substantial and long-term shipments of 5 inch LCD panels, we can guarantee a stable supply of this 5″ LCD display panel module throughout the life cycle of your product.

Based on the panel’s high-cost performance and excellent storage and operating temperature range, this type of LCD display module can be widely used in smart homes, pos machines, industrial instruments (meters), and small medical equipment and other products.

We have several 5-inch LCD products with different specifications for you to choose from, so as to save your development and customization costs. Welcome to contact us.

Winstar Display 5 inch standard higher resolution TFT LCD model. The dimension is between our standard 4.3 inches and standard 5.7 inches TFT modules, but the WF50B is with a better resolution. The resolution of our existing standard 4.3" is with 480x272 resolution and 5.7" TFT is with 320x240, as to the WF50B is with 800x480 resolution. The display WF50B is a good option for customers while designing a new project which request a better resolution or competitive price. The display WF50B is with outline dimension of 120.7 x 75.8 mm and AA size of 108.0 x 64.80 mm. The WF50B 5" TFT module can be operating at temperatures from –20℃ to +70℃; its storage temperatures range from -30℃ to +80℃. This display WF50BTIAGDNT0 TFT LCD module is a 5 inch diagonal, 800xRGBx480, full color TFT-LCD module.

Search keyword: tft 5, tft 5", 5 tft lcd, 5" tft lcd, 5 inch tft lcd, tft lcd 5, 5 tft display, 5" tft display, 5 inch tft display, tft display 5, tft display 5", 5.0 tft lcd,5"tft

Winstar Display 5 inch standard higher resolution TFT model. The dimension is between our standard 4.3 inches and standard 5.7 inches TFT modules, but the WF50B is with a better resolution. The resolution of our existing standard 4.3" is with 480x272 resolution and 5.7" TFT is with 320x240, as to the WF50B is with 800x480 resolution. The display WF50B is a good option for customers while designing a new project which request a better resolution or competitive price. The 5" touch screen TFT LCD WF50BTIAGDNGD is with outline dimension of 120.7 x 75.8 mm and AA size of 108 x 64.8 mm. The WF50BTIAGDNGD module can be operating at temperatures from –20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

Search keyword: tft 5, tft 5", 5 tft lcd, 5" tft lcd, 5 inch tft lcd, tft lcd 5, 5 tft display, 5" tft display, 5 inch tft display, tft display 5, tft display 5", 5.0 tft lcd,5"tft

We cater to clients across the world. Microtips Technology provides local sales and engineering support in the Americas, Europe, and Asia. We have an expertise in making 5-inch color TFT LCD modules, and we offer these displays in customized specifications. You can contact us for further details regarding pricing, customizations, and design-related queries regarding our low-cost 5-inch color TFT displays.

This 800x480 resolution LCD TFT is equipped with a powerful backlight, providing visibility in bright lighting conditions including the direct sun. The 24-bit sunlight readable display has RGB interface and allows optimal viewing up to 70° from any direction. The Liquid Crystal Display has a built-in ILI6122 controller, FFC connection, is RoHS compliant and has a 10-point mulit-touch capacitive touchscreen.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Equip your display with a custom cut cover glass to improve durability. Choose from a variety of cover glass thicknesses and get optical bonding to protect against moisture and debris.

Our new line of 10.1” TFT displays with IPS technology are now available! These 10.1” IPS displays offer three interface options to choose from including RGB, LVDS, and HDMI interface, each with two touchscreen options as capacitive or without a touchscreen.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.

ER-TFT050-2 is 480x272 dots 5" color tft lcd module display with ILI6482 driver IC,optional 5 points capacitive multi-touch panel with controller GSL1680 and optional 4-wire resistive touch panel screen,superior display quality,super wide view angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, ARM and Raspberry PI .It can be used in any embedded systems,car,mp4,gps,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface. FPC with zif connector is easily to assemble or remove.