sanitizing touch screen monitors factory

2023-01-03 12:32:11

Make sure that you have the correct touchscreen before following the below steps. It is important to follow the correct procedures for sanitizing your touchscreen in order to maximize their lifespan without damage. In case you are not sure which type of touchscreen you have, check your product manual or get in touch with specialists.

Resistive technology has one of the best reputations for durability. Resistive touch panels go through a series of processes when they are being built, including a hot hydrochloric acid bath, followed by a hot lye bath. These screens are able to withstand opposite ends of the pH balance, which makes them resilient.

Never apply cleaner directly to the touch panel surface; if the cleaner is spilled onto the touch panel, soak it up immediately with an absorbent cloth.

The cleaner must be neither acidic nor alkaline (neutral pH). Never use organic chemicals such as paint thinner, acetone, toluene, xylene, propy, isopropyl alcohol or kerosene. Use of incorrect cleaners can result in optical impairment of touch panel and/or damage to functionality.

PCAP technology is even more durable, thanks to being built with a glass cover. Cover glass has countless advantages including an incredible lifespan. Speaking from a chemical standpoint, glass is virtually indestructible; PCAP screens can withstand both industrial chemicals and household products such as acetone, hexane, laundry detergent, etc.

Using a soft microfiber cloth dampened with a 50% isopropyl alcohol mixed in 50% water solution, or a disinfectant product such as a small amount of hand sanitizer gently wipe the touchscreen clean. Ammonia based glass cleaners (typically 5-10% ammonia), 1: 100 bleach: water solution, or 75% alcohol can also be used to clean the surface of PCAP touch screens.

SAW touchscreens is also simple to sanitize, as it has solid glass on top. For touchscreens on SAW technology you must follow the same disinfecting steps as for PCAP touch screens.

IR touchscreen might have a glass screen plus a bezel that needs to be watched out for during cleaning and disinfecting. Learn more detail on IR technology here.

Using a soft microfiber cloth dampened with 70% isopropyl alcohol gently wipe the touchscreen clean. You can also use a small amount of hand sanitizer.

Be careful not to saturate the infrared bezel around the outside frame of the monitor. If solution gets in, it can damage the touchscreen functionality.

Using a dry portion of the microfiber cloth, gently wipe the touch screen and edges off to remove any lingering cleaning solution. Give the screen a minute or two to air dry, and then wipe it off with the dry portion of the cloth once more.

Once the screen is completely dry, plug it back in and turn it on. Let the device stand for half an hour to let the alcohol residue to evaporate, before using the device again.

Wash the microfiber cloth. To wash the microfiber cloth, soak it in warm, soapy water. The warm water serves to open the fibers and release the grime that may have gathered. Make sure you wash it without a fabric softener, as that can transfer a film to the touch screen, and contradict what you are trying to accomplish. Scrub the cloth lightly while soaking it (not too hard or you will damage the cloth). After soaking, avoid squeezing out any excess water, let the cloth out to air dry or just blow dry it.

sanitizing touch screen monitors factory

During these unprecedented times, it is crucial to stay up to date with any and all methods to stay healthy. Here at TRU-Vu, we value our customers’ health and safety. For this reason, we have put together some guidelines for cleaning and disinfecting TRU-Vu touch screen monitors. This can be achieved without causing any damage to the touch screen

Avoid using abrasive cloths, such as rags or paper towels, as they can spread lint and/or even damage the screen. Instead, use only non-abrasive cloths, such as soft lint-free cloth, in order to avoid scratching the monitor.

Dampen a new clean, non-abrasive cloth with a disinfectant recommended by the CDC: a household bleach solution (1/3 cup of bleach per gallon of water) or Isopropyl alcohol ( 71% to 85% alcohol). Be sure to squeeze any excess liquid off of the cloth. Do not spray the solution directly onto the touch screen.

Apply the solution to a soft cleaning cloth; do not spray directly onto the touch screen. Wear gloves during the cleaning process. Finally, discard both the gloves and the cleaning cloth following the cleaning process.

Certainly, If you have any questions, or require further assistance with cleaning your TRU-Vu touch screen monitor, please contact us at #847-259-2344.

With over 540 LCD monitors and touch screens on our site, selecting the ideal equipment, or touch screen solution may be a bit overwhelming.To help narrow-down the choices, check out ourAdvanced Search Tool.For example, this enables you filter by your own specific search requirements.

sanitizing touch screen monitors factory

With the heightened focus on sanitizing hard surfaces that your employees or possible guests interact with, many customers have asked us our recommended practices to clean and disinfect CallConnect touch screen call button monitors. But, these guidelines may also apply to other electronic display surfaces such as Point of Sale terminals or walk up customer ticket kiosks. To be safe, we suggest you check with your PoS suppliers on their recommended cleaning and sanitizing suggestions.

Do not get liquids inside the unit. Do not spray directly on the monitor screen. Instead, use wet wipes, a sprayed cloth or a dampened cloth with the excess moisture squeezed off.

Be mindful that the CallConnect call button monitors are touch screen. So as you clean the surface, you may inadvertently change the view. Don’t worry, the monitors are designed to automatically go back to the “home” screen after a certain time period. If you have any questions on cleaning this or other Venue Valet products, please contact us through one of support methods below:

sanitizing touch screen monitors factory

If you regularly use a touch screen monitor or other high-quality computer monitor, you may be wondering how to properly clean the display and whether or not water, paper towels, and other common cleaning agents are appropriate for use. This way, you’ll be able to clean a computer monitor without leaving streaks.

Touch screens can get dirty fast, as our fingers regularly come into contact with grime, dirt, and germs. There are a number of ways to safely clean a touch screen computer monitor, with these steps being not dissimilar to cleaning a standard computer screen.

One of the primary guidelines for safely cleaning a touch screen monitor is to avoid liquids. In other words, do not use water, soap, isopropyl alcohol, liquid sprays, or any liquid-based cleaning agent when it comes to sensitive electronics. The excess liquid could get away from you and seep into the internal components, causing long-term damage to the touch screen device. There are, however, some purpose-built liquid cleaning agents made for touch screen phones and the like. They can be on the expensive side and still come with some risk.

The easiest way to begin the touch screen monitor cleaning process is to purchase a gentle microfiber cloth. These microfiber cloths are the perfect choice for cleaning electronic devices, as the gentle fibers present will not damage the screen as you clean it. The same cannot be said for paper towels, dish rags, and traditional towels. Each of the above items should be avoided in favor of a microfiber cloth when it comes to a touch screen monitor. In other words, keep your old shirts in the dresser and away from your display.

Warning: The same cannot be said for paper towels, dish rags, and traditional towels. Each of the above items should be avoided in favor of a microfiber cloth when it comes to a touch screen monitor

Once you have the microfiber cloth ready to go, the best way to begin the cleaning process is by starting at the center of the touch screen monitor. Take great care to gently wipe the screen in a circular motion until you reach the edges of the display. Repeat this process until your monitor is free from dust, dirt, fingerprints, and other unsightly marks. If you have used a liquid-based cleaning agent, be sure to apply this agent to the microfiber cloth and not the display itself. Additionally, keep the wet side of the microfiber cloth away from the corners of the monitor.

Tip: Once you have the microfiber cloth ready to go, the best way to begin the cleaning process is by starting at the center of the touch screen monitor

sanitizing touch screen monitors factory

The CDC recommends using disinfecting wipes to clean the outside of your touch screen kiosk and surroundings, as well as high-touch areas. A readily available option is the Clorox Disinfecting Wipes. (Be sure they do not contain bleach or other chemicals that can damage the display or paint, and do not use on the touchscreen)

Follow the steps below to safely clean a touch screen to remove oils, dirt, grime, and germs. Please keep in mind that some self-service kiosks have different types of touch screens, so we will go over 4 of the most common kiosk touch-screen types.

Please make sure that you have the correct touchscreen before following the steps. If done incorrectly, the touchscreen monitors may be damaged. If you aren’t sure which type of touchscreen you have, please see your product manual or ask your project manager how to clean a touch screen properly.

(See section 3.0 for more cleaning details)Using a soft cloth (microfiber) dampened with isopropyl alcohol or a mild non-abrasive soap & water solution, gently wipe the touchscreen clean. You can also use a small amount of hand sanitizer. Be careful not to saturate the infrared bezel around the outside frame of the monitor.

A resistive touch screen monitor is composed of a glass panel and a film screen, each covered with a thin metallic layer, separated by a narrow gap. When a user touches the screen, the two metallic layers make contact, resulting in electrical flow. The point of contact is detected by this change in voltage.

Be sure the cloth is only slightly dampened, not wet. Never apply cleaner directly to the touch panel surface; if the cleaner is spilled onto the touch panel, soak it up immediately with an absorbent cloth.

In a Surface Capacitive touchscreen, there is a transparent electrode layer on the top of a glass panel, and covered by a protective layer. When an exposed finger touches the monitor screen, it reacts to the static electrical capacity of the human body, which allows the screen to pinpoint the position of the finger.

A projected Capacitive Touchscreen is similar to Surface Capacitive, but it offers two primary advantages. In addition to a bare finger, it can also be activated with surgical gloves or thin cotton gloves, and it enables multi-touch activation (simultaneous input from two fingers). When a finger comes into contact with the screen, the ratios of the electrical currents change and the computer is able to detect the touch points. This touchscreen is simpler to clean, as it has solid glass on top.

Using a soft cloth (microfiber) dampened with isopropyl alcohol or a mild non-abrasive soap & water solution, gently wipe the touchscreen clean. You can also use a small amount of hand sanitizer.

SAW (Surface Acoustic Wave) touch screen monitors utilize a series of transducers and receivers along the sides of the monitor’s glass plate to create an invisible grid of ultrasonic waves on the surface. When the panel is touched, a portion of the wave is absorbed. This allows the receiving transducer to locate the touch point and send this data to the computer. SAW monitors can be activated by a finger, gloved hand, or soft-tip stylus.This touchscreen is also simple to clean, as it is solid glass on top.

Using a soft cloth (microfiber) dampened with isopropyl alcohol or a mild non-abrasive soap & water solution, gently wipe the touchscreen clean. You can also use a small amount of hand sanitizer.

Infrared touch screen monitors do not overlay the display with an additional screen or screen sandwich. Instead, infrared monitors use IR emitters and receivers to create an invisible grid of light beams across the screen. When an object interrupts the invisible infrared light beam, the sensors are able to locate the touch point. This touchscreen has a glass screen, but there is normally a bezel around the outside that needs to be watched out for during use and cleaning.

Using a soft cloth (microfiber) dampened with isopropyl alcohol or a mild non-abrasive soap & water solution, gently wipe the touchscreen clean. You can also use a small amount of hand sanitizer.

Be careful not to saturate the infrared bezel around the outside frame of the monitor. If solution gets in, it can damage the touchscreen functionality.

If all of the steps have been completed according to the above instructions, your kiosk touchscreen should be cleaned correctly. If there are any other errors that aren’t allowing you access to your kiosk, check the rest of the Knowledgebase, or open a technical support ticket HERE.

The 5 Types Of Touch Screen Technology. Which One Is Best For You?”Tru-Vu Monitors,www.controldesign.com/assets/14WPpdf/1407TouchScreenBasicsComparisons.pdf

“Touch Panels – Cleaning Information.”Resistive Touch Panel Cleaning Information – Fujitsu United States,www.fujitsu.com/us/products/devices/components/touch-panels/information/cleaning-info.html.

sanitizing touch screen monitors factory

As the COVID-19 pandemic rages across the globe, cleaning touch panel surfaces for users" peace of mind has become necessary because the virus can remain viable on surfaces for hours to days. Depending on type and model, AMT has compiled cleaning methods that we will share with you. We recommend carefully using only certain chemicals to clean both AMT projected capacitive (PCAP) and resistive touch panels.

According to US CDC, alcohol and bleach can be used to clean frequently touched surfaces. AMT has a rigorous testing structure for certifying the materials used in our products are suitable in terms of performance, durability, reliability, etc. The touch surface of AMT PCAP and resistive touch panels can withstand both industrial chemicals and household products such as acetone, hexane, laundry detergent, etc.

Ammonia based glass cleaners (typically 5 - 10% ammonia), 1: 100 bleach: water solution, or 75% alcohol can be used to clean the surface of AMT PCAP and resistive touch panels.

● Cleaning solutions containing bleach, alcohol, and ammonia are corrosive to touch panel surface coatings and ITO film. So, you should not leave the solution on the touch panel surface for more than 2 minutes. Make sure to remove all residue when finished cleaning.

sanitizing touch screen monitors factory

We live in a touchscreen society. From ATMs and grocery store checkouts to airport ticket kiosks and fast-food self-serve ordering stations, there are public touchscreen kiosks and point-of-service (POS) touchpads everywhere. They’re popular because they offer exceptional convenience, allowing people to quickly get the information or item they want without having to wait for human assistance.

The novel coronavirus may survive on some surfaces up to (and perhaps longer than) nine days — and you can catch COVID-19, the disease caused by the virus, simply by touching a contaminated surface and then touching your eyes, nose or mouth. So, it may seem counterintuitive that touchscreen technology can actually enhance safety and deliver peace of mind. But that’s the case if proper care is taken to ensure these surfaces are free of contaminants.

“Using properly cleaned touch kiosks and POS systems rather than interacting with humans is good practice in terms of limiting the spread of germs, even without the specter of coronavirus,” explained ICS CEO Peter Winston. “For instance, using a credit card and touchpad at the grocery store, or Apple Pay on your phone, means you don’t have to hand the cashier cash. Not only is the currency filthy, but the cashier’s hands may be as well — even if they’re periodically cleaned using alcohol-based hand sanitizer. And you can also sufficiently distance yourself, which is essential when not every person out in public is wearing a protective mask.”

Of course, the benefits of avoiding humans in favor of touchscreens only pan out if those screens are cleaned often.(In the current environment, “often” translates to “between every customer.”) Here’s why.

Even though touchscreen technology is providing consumers with desired convenience, touchscreens and touchpads can be vectors of infectious diseases (if not cleaned properly). Scientists have found a plethora of bacteria on touchscreens, from staphylococcus, which causes nasty and often antibiotic-resistant infections, to Enterococcus faecalis (E. faecalis), which causes a soaring number of hospital-acquired infections. (According to the World Health Organization, 99,000 deaths annually in the U.S. are attributed to HCAIs at a cost of $6.5 billion.)

London Metropolitan University in 2018 found that touchscreens in some McDonald’s restaurants carried traces of feces. “It is a serious issue since most customers eat immediately after placing their order and grabbing their bag of chicken nuggets and fries,” Winston said. “Of course, the problem is not unique to McDonald"s. It applies to any outlet that sells food that will be eaten without utensils. Hungry customers are extremely unlikely to not wash their hands after touching the ordering kiosk and before eating their food.”

And, the issue is not unique to food service. Research by Insurance Quotes found an average of 253,857 colony-forming germ units per square inch on airport check-in screens. Enterococcus faecalis (E. faecalis) bacteria, even listeria, have been found on public screens, including those in many hospitals. An E. faecalis infection may cause fever, fatigue, headache, chills, vomiting, and diarrhea. And in more severe cases, can lead to meningitis or urinary tract infections. Listeria in pregnant women, if left untreated, can cause miscarriages and stillbirths.

And, let’s not forget that the germs that cause colds and flu — and the potentially deadly COVID-19 — easily can be spread by touching a surface like a touchscreen that has respiratory droplets on it and then touching your face.

If you’re using a touchscreen, the focus should be on frequent and effective hand washing, as well as disinfecting personal items like credit cards and mobile phones (especially mobile phones, which harbor 10x the germs of toilet seats!) after use. Here’s a helpful tutorial on how to clean your phone without damaging its oleophobic and hydrophobic coatings, which prevent water and oil from damaging the display. (If you have an iPhone, Apple recommends using a 70 percent isopropyl alcohol wipe or Clorox Disinfecting Wipes to gently wipe hard, nonporous surfaces. Avoid bleach.)

If your business owns customer or employee-facing touchscreens — information kiosks, pay-at-the-table credit card processors, handheld and fixed-tablet POS touchscreen systems — the cleaning task is more involved as this equipment rarely gets the same level of sanitation attention as other surfaces in a facility, such as counter tops.

Proper touchscreen cleaning requires a frequent sanitizing protocol using suitable disinfectants and cleansers that will not harm your valuable devices. Jeff LeBlanc, Director of User Experience at touchscreen kiosk manufacturer Advanced Kiosks, says the company tell its customers that hand sanitizer can be used to clean almost all monitors and components to ensure a clean touchscreen. “We recommend they use a damp cloth to wipe the monitor. They’re told not to saturate the cloth or surface of the monitor or any components, and to avoid any openings or ports.”

LeBlanc’s firm developed detailed instructions on how to safely clean a variety of touchscreen monitor types, including surface acoustic wave, projected capacitative and infrared. For instance surface capacitative touchscreens, commonly found in retail environments, have a transparent electrode layer on the top of a glass panel, covered by a protective layer. “When an exposed finger touches the monitor screen, it reacts to the static electrical capacity of the human body, which allows the screen to pinpoint the position of the finger,” LeBlanc said.

“Regardless of the type of customer-facing touchscreen your business utilizes, as the owner the onus is on you to make sure your restaurant’s Coke Freestyle beverage dispenser or your bodega’s digital cash register or your fuel franchise’s gasoline pump — or any other public screen you control — is clean and ready for customer use,” Winston said.

“Touchscreens are of immense benefit to businesses, their customers and their employees in terms of convenience, ease of use and easy access to essential information," Winston stressed. "Let’s make sure they don’t become a source of anxiety or disease transmission.”

sanitizing touch screen monitors factory

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

But, not everything gets the attention it needs when it comes to cleanliness.It"s essential that we clean ourtouchscreens as much as we clean our hands.

4. Use your best judgment and clean your screens as often as you feel is necessary to protect yourself your employees and prevent the spread of disease.

Do you remember the last time you cleaned the screen of your smartphone or tablet?If the answer is never or you can"t remember, you may want to keep reading.

Unless you"re washing your hands every time before and after touching your phone, tablet, or laptop screen, any bacteria or germs that may be on your hands can spread to that surface.

When business is booming, it"s unreasonable to ask cashiers, wait staff, bartenders, managers, or anyone else who may use the POS system to wash their hands before touching the screen every time.

Don"t use abrasive cloths, paper towels, or tissue paper that can easily scratch the touchscreen. Scratches may be minor, but they can worsen over time, damaging and dulling the screen. Use microfiber cloths instead, which are specially designed to clean sensitive surfaces. We"ll talk more about this later.

Don"t press too hard while cleaning the screen and damage your device. Use light continuous wiping to avoid permanent damage to the screen"s functionality.

Let"s start with your POS system. To effectively clean and disinfect these screens, you"ll first need to make or purchase a cleaning solution consisting of 80% alcohol and 20% water.

Power off the system and unplug it from the wall. Eliminate any residual static electricity from the computer by touching a metal part of the case, not any inside components. It is essential to clear this static electricity first to prevent a shock to yourself or damage to the machine.

Spray your cloth with the cleaning solution. DO NOT spray the cleaning solution directly on the screen. The liquid concentration could soak between the thin layers and cause black spots to appear on the screen.

With a circular motion, gently wipe the screen surface to remove any dirt or residue from the glass. Using a circular motion can help prevent streaking.

sanitizing touch screen monitors factory

Since COVID-19 hit, we’ve been getting more requests about how to disinfect touchscreen surfaces. It is important to realize touchscreens are sensitive to chemicals and having liquid applied to them.

Touchscreen display modules are not sealed and can be damaged if liquids are sprayed or poured directly onto the surface. Cleaning cloths should be wrung of excess liquid prior to using on device surfaces.

Avoid Isopropyl alcohol at concentrations greater than 70% and non-diluted bleach or ammonia solutions. The use of incorrect solutions can result in visual impairment of touchscreen, discoloration, and damage functionality.

If further cleaning is needed, use a commercially available product such as Klear Screen or Glass Plus to dampen a clean, dry, non-abrasive cloth or use pre-moistened wipes designed for cleaning electronics. Avoid contact with the edges of the film or glass, and with the flex tail.

sanitizing touch screen monitors factory

As touch screen terminals, kiosks, and tablets become increasingly frequent in the way retail stores and restaurants do business, and with COVID-19’s arrival in the United States, touch screens need to be frequently and thoroughly sanitized to reduce the risk of spreading infection.

Powering off the system and unplugging it from the wall is crucial. Drain any residual static electricity from the PC by touching a metal part of the case, notany of the components inside. Any residual static electricity has the potential to give you a shock or do permanent damage to the machine.

NEVER spray the glass cleaner directly onto the display. The liquid will seep into the corners and in between the thin layers. This will cause black spots to appear on the touch screen. Never use ammonia-based glass cleaners, such as Windex, on your touch screen. The ammonia will destroy the screen membrane and cause permanent discoloration. In more severe cases, it will result in touch screens not working appropriately.

Never dry with paper towels, facial tissues, or abrasive cloth. These items can cause tiny scratches in the touch screen. Always use a dry, clean, microfiber cloth to gently dry the screen.

During crises, such as the COVID pandemic, it’s critical to sanitize your touch screen devices as often as possible. For devices like rugged tablets that are handled by staff members each shift, consider cleaning them at the end of each shift. For fixed-terminals or self-service kiosk, consider cleaning at least once a day.

sanitizing touch screen monitors factory

70% IPA is the most compatible formulation for sensitive touch screen equipment in healthcare. It is the most referenced formula in equipment manufacturer’s instructions for use. PDI has performed extensive compatibility work on touch screen materials and equipment to confirm compatibility. Easy Screen wipes are compatible with polycarbonate, glass, aluminum silicate, acrylic, stainless steel and more!

[Cleaning the screen of your mobile device with a wipe containing alcohol may reduce the lifespan of any anti-fingerprint coating. Please check your device manufacturer’s cleaning instructions.]

It is recommended that all high-touch surfaces be routinely cleaned and disinfected between uses, or anytime they become visibly soiled. The use of PDI’s Sani-Cloth® brand disinfecting wipes are generally safe on computer keyboards and mice, however they are not intended for use on touchscreen monitors. PDI’s Easy Screen® Cleaning Wipe was specifically developed for use on touchscreen equipment, and PDI performed extensive testing on touchscreen materials to confirm compatibility. Its 70% IPA formula is the most referenced formula in equipment manufacturer’s instructions for use. Easy Screen wipes are also compatible with polycarbonate, glass, aluminum silicate, acrylic, stainless steel and more!

[Cleaning the screen of your mobile device with a wipe containing alcohol may reduce the lifespan of any anti-fingerprint coating. Please check your device manufacturer’s cleaning instructions.]

Sani-Cloth, Sani-Prime and Easy Screen products DO NOT carry California Proposition 65 Warning. Proposition 65, officially known as the Safe Drinking Water and Toxic Enforcement Act of 1986, requires the state to maintain and update a list of chemicals known to the state to cause cancer or reproductive toxicity.

sanitizing touch screen monitors factory

Do you know most of the computer screens that you see in everyday life cannot be effectively cleaned or disinfected with household bleach, alcohol, or any other ammonia-made products?

In this article, we will explain why most of the monitors can’t be cleaned by household cleaning products, and introduce why AG Neovo’s monitors with NeoV glass screens can be cleaned safely.

How to clean monitor screens safely is always a concern by the users. They may not understand what kinds of household cleaning products can be used to clean the LCD screen. Stronger cleaning products will strip away most computer screens’ anti-reflective or anti-glare coatings, leading to permanent clouding on them. But, if you are using the AG Neovo’s monitors with NeoV optical glass screen, you will not be worried about cleaning the screen.

The glass screen coating of NeoV monitor is undamaged by alcohol, acid and alkali cleaning household products – this allows users in all environments to be assured that the optical hard glass can be frequently cleaned off of harmful germs without incurring screen damage.

NeoV optical glass is placed in front of the LCD panel, ensuring there is no gap between the panel and the bezel. This sealed design also prevents any splashed liquid from getting on the screen or flooding into the panel via the gap when cleaning monitors.

Rub the cloth on the screen in small circles to make sure that the alcohol is well-distributed. Make sure you avoid putting direct pressure on the glass.

The Centre for Disease Control and Prevention (CDC) states that to clean and disinfect surfaces that are frequently touched, users should use diluted household bleach, alcohol-based solutions, or other recognised disinfectants. While this isn’t often the case with most computer screens, the NeoV is capable of withstanding the PH levels of bleach and ammonia products (12 and 11PH respectively), which means the monitor can be effectively disinfected and cleaned by household disinfectants.

Rubbing Alcohol:It’s not recommended to use alcohol to clean the most of monitor screens because it contains corrosive substances to damage the coating on the LCD panels. But AG Neovo’s NeoV series monitors are with glass screens on the front to withstand up to 95% alcohol, so it is safe to use above 70% alcohol to clean or disinfect.

Windex: It’s not safe to use Windex for most of the monitors on the market, but it’s safe to use Windex to clean AG Neovo’s NeoV monitors. Spray Windex on the microfiber, and gently wipe the glass surface, just like cleaning the windows at home.

Clorox Wipes, Lysol Wipes: It’s safe to use Clorox, Lysol disinfecting wipes or other household disinfectants to clean NeoV computer screens. Because the optical hard glass on the front of LCD panels pass acid and alkali resistant tests to withstand bleach, ammonia-type household disinfectant products, like Clorox, Lysol wipes, with high PH levels.

Whether you’re working from home, in public, at school, at transportation hubs, in offices, and so on, it’s imperative to disinfect your environment, including monitors, on a regular basis. The NeoV features are specifically suited for this environment. How often you clean monitors should be based on how and where you are using them.

Home and office displays are used daily and can often be situated close to other work stations or in busy areas of the house. Regular disinfecting and cleaning LCD screens is advised.

It’s natural for laboratory monitors to come into contact with a wide range of different solutions and materials, and thus it’s important to regularly clean your monitor. Luckily, with the NeoV Optical Hard Glass, any splash of acid or alkali fluids will carry no eroding effects on your screens.

School monitors could be used by dozens of children each day. It’s imperative that all monitor screens are sanitised accordingly to keep students safe.

It goes without saying that all medical environments need to be clean at all times. Each day monitors will need to be disinfected to stop the manifestation of germs that may begin to congregate on the screen. There are few monitors out there that perform better than NeoV when it comes cleanliness – with the monitor passing the 99% alcohol test.

It’s vital that monitors situated in crowded environments are regularly cleaned to ensure that germs aren’t given the chance to build up. When it comes to public transport, it’s likely that commuters and travellers are going to come in relatively close contact to the monitors that you’re using.

sanitizing touch screen monitors factory

An industrialtouch screen is an industrial monitor with a touch function. When the industrial environment is harsh or the user operates improperly, it will cause the industrial touch screen to malfunction, so it is necessary to carry out regular cleaning and maintenance. So, what are the correct cleaning methods? How to clean the touch screen without causing damage?

(3) If the screen is particularly dirty or greasy, you may need to use a cleaning solution. Mix a small amount of mild soap or alcohol-based cleaner with water, and use a soft, damp cloth to gently wipe the screen. Avoid using harsh cleaners or abrasive cloths, as these can damage the screen.

(6) It"s important to handle the touch screen gently and avoid applying too much pressure, as this can damage the screen. If you are unable to remove dirt or stains using the above method, you may need to contact the manufacturer for additional cleaning instructions.

In order to avoid unnecessary troubles, please do not use too hot water to clean the screen. Do not use any cleaner containing ammonia unless the industrial display manufacturer has explicitly indicated the touch screen of the product. Ammonia may damage the screen. Avoid spraying liquid or water directly on the screen. Instead, spray it on the superfine fibers, squeeze it to remove any excess liquid, and then wipe the screen carefully. Do not use tissue or toilet paper. They contain wood fibers that scratch the surface of any plastic product. You may not see scratches for the first time, but as time goes on, your screen will look like you clean it with very thin steel wool, which will make the image looks dark and a little blurred. Don"t press too hard when cleaning the screen, you may damage the monitor.

These are some small tips for cleaning industrial touchscreen monitors. Besides, users should pay attention to correct operation when using industrial monitors, so as to avoid damage to the industrial touch screen as far as possible.

sanitizing touch screen monitors factory

You Might Also Be Interested In