replacing lcd panel in rice lake 720i free sample

2023-01-03 12:32:11

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

replacing lcd panel in rice lake 720i free sample

0.3 μV/graduation minimum at 7.5 Hz, 1.0 μV/graduation typical at 120 Hz (manual only), 4.0 μV/graduation typical at 960 Hz (manual only), 1.0 μV/graduation recommended

replacing lcd panel in rice lake 720i free sample

0.3 μV/graduation minimum at 7.5 Hz, 1.0 μV/graduation typical at 120 Hz (manual only), 4.0 μV/graduation typical at 960 Hz (manual only), 1.0 μV/graduation recommended

replacing lcd panel in rice lake 720i free sample

All information contained within this publication is, to the best of our knowledge, complete and accurate at the time of publication. Rice Lake Weighing Systems reserves the right to make changes to the technology, features, specifications and design of the equipment without notice.

Reporting Commands ............... . 89 Rice Lake continually offers web-based video training on a growing selection of product-related topics at no cost.

720i Programmable HMI Indicator/Controller Rice Lake continually offers web-based video training on a growing selection of product-related topics at no cost. Visit www.ricelake.com/webinars Visit our website www.RiceLake.com...

10-position screw terminal for J6 (1) 76513 4-position screw terminals for J3 and J5 (2) 76514 6-position screw terminals for J1, J2 and J4 (3) 94422 Capacity label (1) Table 3-6. Universal Model Replacement Parts (Continued) © Rice Lake Weighing Systems ● All Rights Reserved...

Installation From Power Supply Figure 3-8. 720i Universal Model, CPU Board and Backplate Ground wire (13) to backplate (22) Grounding Stack Ground wire from power cord (15) Figure 3-9. 720i Universal Model, Grounding Detail © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller Level Level Parameter Parameter Level Level Parameter Parameter Default value Value Value Value When moving through values below the ﬁrst menu level, press to return to the level above. Press to move to the next parameter on the level above.

720i Programmable HMI Indicator/Controller SCALES Menu Parameter Choices Description Level 2 submenus Allows configuration and calibration of each scale SCALE 1 CONFIG Scale hardware configuration (A/D or serial scale) Level 3 submenus Specifies the number of full scale graduations if SPLIT=OFF. (For multi-range and multi-interval scales ...

AUTOPositive peak, auto print, auto reset. Automatic print occurs when scale load is 0 ± 10 display divisions and at standstill. Following the print command, the peak value is cleared and reset automatically. Table 4-2. SCALES Menu Parameters (Continued) © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller SCALES Menu Parameter Choices Description WZERO WVAL CALIBR WSPAN See Level 4 submenu descriptions in Table 4-5 on page 35 Section 5.2 on page WLIN REZERO Table 4-2. SCALES Menu Parameters (Continued) www.RiceLake.com Visit our website...

8.888888 8.888888 88.88888 88.88888 888.8888 troyoz 888.8888 8888.888 troylb 8888.888 88888.88 88888.88 888888.8 CUSTOM NONE UNITS INTERVL REFRESH 0.100000 number number HOUR Figure 4-8. SCALES Menu, FORMAT Submenu, SPLIT = OFF © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller SCALES Menu, FORMAT Submenu, SPLIT = OFF Parameter Choices Description Level 4, FORMAT submenu DECPNT Specifies the decimal position, display divisions, and units used for the primary units. See Level 5 submenu PRIMAR DSPDIV parameter descriptions.

Decimal point location. Determines the location of the decimal point or dummy zeros in the display. 888.8888 8888.888 88888.88 888888.8 DSPDIV Display divisions. Selects the minimum division size for the ROC units displayed weight. Table 4-3. SCALES Menu, FORMAT Submenu Parameters, SPLIT = OFF (Continued) © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller SCALES Menu, FORMAT Submenu, SPLIT = OFF Parameter Choices Description Multiplier. Specifies the conversion factor by which the primary units are multiplied by to obtain the displayed MULT rate of change units. 0.000001– Section 12.8 on page 110 for information about conversion factors.

10000 weight 8888888 8888880 8888800 8.888888 88.88888 888.8888 troyoz 8888.888 If SPLIT = 3RNG or 3INTVL troylb 88888.88 CUSTOM NONE  Figure 4-9. FORMAT Submenu, SPLIT OFF (Multi-range and Multi-interval Scales) © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller SCALES Menu, FORMAT Submenu, SPLIT  OFF Parameter Choices Description Level 4, FORMAT submenu 8888888 8888880 8888800 8.888888 Decimal point location for first range or interval. Specifies the location of the decimal point or dummy zeroes in DECPT1 88.88888...

Use this parameter only after WZERO and WSPAN have been set. See Section 5.2 on Note page 50 for more information about using this parameter. Table 4-5. SCALES Menu, CALIBR Submenu Parameters © Rice Lake Weighing Systems ● All Rights Reserved...

If PORT = CMD INDUST 720i Batching Version only Selectable token characters 4KEYS KEYPAD If STREAM = LFT or INDUST DISPLAY If PORT = CMD Figure 4-12. SERIAL Menu, Port 4 and Expansion Ports © Rice Lake Weighing Systems ● All Rights Reserved...

IND SC:Industrial (non-legal-for-trade) scale input KEYBD is available only on Port 1; SCALE, IND SC are available only on Port 4 and higher (expansion ports). PORT 2 The keyboard interface is not hot-pluggable. Power-off the 720i before attaching SCALE PORT 4 Note keyboard cable to the Port 1 connector.

KEYPAD Streaming is not supported for RS-485 connections. Note The print key always prints locally. Specifies the stream format used for the streamed data (CMD scale type). The default format is the Rice Lake SFMT format format (see Section 12.6 on page 108).

The unit performs a RESETCONFIGURATION then returns to the setup mode configuration display. KYBDLK Keyboard lock. Specify ON to disable the keypad in normal mode. Table 4-7. FEATURE Menu Parameters © Rice Lake Weighing Systems ● All Rights Reserved...

Display ROC Alibi Setpoint Batch Start SOFTKEYS Batch Stop These features are only available with the 720i Batching version software. Batch Pause Batch Reset Weigh Reports These features are available with the Advanced Truck Mode Only. Management Weigh In Weigh Out These features are available with the Truck Modes 1-6 Only.

Specifies the shift start and end time in 24 hour format (HHMMSS) SHIFT # END DAY START HHMMSS Specifies the day start and end time in 24 hour format (HHMMSS) DAY END HHMMSS Table 4-7. FEATURE Menu Parameters (Continued) © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller FEATURE Menu, REGULAT/INDUST Submenu The INDUST setting of the REGULAT parameter allows customization of several tare, clear, and print functions for use in non- legal-for-trade scale installations. See Section 12.2 on page 103 for more information about regulatory mode functions.

• CLRTAR clears the current tare for the active scale. GROSS • CLRACC clears the active accumulator. PRIM CLRTAR CLRACC * 720i Batching Software Version Only Table 4-9. DIG I/O Menu Parameters © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller Command Description Supported Ticket Formats Note TR1, TR2, and TR3 truck ticket weight data includes keywords INBOUND, KEYED, RECALLED, as necessary. See Section 8-2 on page 64 for Advance Truck commands Setpoint Commands Setpoint captured value ...

720i Programmable HMI Indicator/Controller When printing Shift/Day and Detail All/Pending reports: • AUX3FMT is the header • AUX4FMT is each line for each transaction • AUX5FMT is the footer/total lines When printing Summary Reports: • AUX6FMT is the header • AUX7FMT is the header for Source Reports •...

If any of the Advance Mode features (See Table 8-2 on page 64) are turned off, that field should be removed from the Note Print Format, otherwise a blank field will be printed. © Rice Lake Weighing Systems ● All Rights Reserved...

Specifies the source of the Summary Report SINGLE ID Prints all shifts for the Daily Report SHIFT 1 SHIFT SHIFT 2 Prints select shifts for the Daily Report SHIFT 3 Table 8-5. Reports Menu Parameters © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller Advance Mode Management Menu In Advance Mode the Weigh, Reports and Management softkeys are enabled. The Management softkey is described below. While in a submenu the TARE key can be pressed to go back to the previous menu. If using the PS2 keyboard, the Note ESC key will take you to the previous menu.

720i Programmable HMI Indicator/Controller Kind Description Batch Continuous Percent relative setpoint. Performs functions based on a specified percentage of the target value of a refer- %REL enced setpoint, using the same weight mode as the referenced setpoint. The actual target value of the %REL setpoint is calculated as a percentage of the target value of the referenced setpoint.

720i Programmable HMI Indicator/Controller GROSS –GROSS ACCUM –NET Same as GROSS VALUE SOURCE TRI P BANDVAL HYSTER HIGHER number number number Scale 1 LOWER If TRIP=INBAND If TRIP=HIGHER INBAND GROSS, NET, –GROSS, and OUTBAND TRIP=OUTBAND TRIP=LOWER –NET setpoints only PREACT...

NONE List of available output bits for INVERT 1–32 speciﬁed slot List of available digital I/O slots If SLOT≠NONE If BA TCH=ON Figure 9-3. +REL, –REL, %RELS and RESREL Setpoint Parameters © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller P AUSE and COUNTER setpoints VALUE ACCESS NAME SENSE BRANCH SLOT DIGOUT List of available NONE NONE number NORMAL output bits for speciﬁed slot HIDE 1–30 1–32 INVERT List of available digital I/O slots COUNTER COUNTER If SLOT≠...

1–32 1–32 List of available output bits for INVERT HIDE 1–30 speciﬁed slot List of available digital I/O slots If SLOT≠ NONE Figure 9-5. COZ, INMOTON, INRANGE, and BATCHPR Setpoint Parameters © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller TOD setpoints TIME DURATION SOURCE time entry time entry Scale 1 TOD setpoints only BATCH CLRACCM CLRTARE PSHACCM PSHPRNT PSHTARE ONQUIET WAITSS ACCESS NAME SLOT DIGOUT SENSE NONE NONE List of available NORMAL output bits for 1–30...

720i Programmable HMI Indicator/Controller ALWAYS NEVER BRANCH 1–32 Figure 9-8. ALWAYS and NEVER Setpoint Parameters SETPTS Menu Parameter Choices Description Level 2 submenus GROSS –GROSS –NET ACCUM +REL –REL %REL Specifies the setpoint kind. RESREL GROSS, NET, –GROSS, –NET, ACCUM, ROC, +REL, –REL, %REL, RESREL. and TOD setpoint kinds can be PAUSE used as either batch or continuous setpoints.

Specifies whether the setpoint is used as a batch (ON) or continuous (OFF) setpoint. CLRACCM Specify ON to clear the accumulator when the setpoint is satisfied Table 9-2. Setpoint Menu Parameters (Continued) © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller SETPTS Menu Parameter Choices Description CLRTARE Specify ON to clear the tare when the setpoint is satisfied Specify ON to update the accumulator and perform a print operation when the setpoint is satisfied. Specify PSHACCM ONQUIET to update the accumulator without printing.

720i Programmable HMI Indicator/Controller If no digital input is assigned to BATRUN, batching proceeds as if BATRUN were always on: the batch will start WARNING when the 3-way switch is turned to RUN, but the STOP mushroom button will not function.

Revolution Whenever a PCE process is built, be sure to build a Revolution hardware configuration file using the 720i module so that all configuration parameters match the process. The Revolution file will define any required digital i/o, softkeys, and the print formats (AuxFmt) used.

19. Set the parameters to and select . This will turn our relay on until the target is reached. bit 2 20. Using Revolution, ensure that DIO bit 2 is set to OUTPUT © Rice Lake Weighing Systems ● All Rights Reserved...

For ease in debugging your process, there is an EDP command that will dump the raw list of commands you have sent to the 720i, "SPSUMP." The first half of the list is all the conditions and actions. The second half lists the steps and associated conditions and actions by numeric reference.

The strings can be added to any or all formats and there are 99 of these to use. A Set User Print will fill these fields. They are strings but any type of data, (real, integer, string or DT) can be inserted and the 720i will Text convert it to a printable string.

720i Programmable HMI Indicator/Controller Command Description Values SC.SSTIME#1 Standstill time 1–65535 SC.OVRLOAD#1 Overload FS+2%, FS+1D, FS+9D, FS SC.WMTTHRH#1 Weighment threshold grads SC.NUMWEIGH#1 Number of weighments — SC.MAX_WEIGHT#1 Maximum weight — SC.DIGFLTR1#1 SC.DIGFLTR2#1 Digital filtering 1, 2, 4, 8, 16, 32, 64, 128, 256 SC.DIGFLTR3#1...

Section 12.6 on page 108 for more information about custom stream formatting. STR.MOTION# STR.RANGE# STR.OK# STR.INVALID# STR.ZERO# For commands including “#p”, p is the serial port number. Table 11-4. SERIAL Port Serial Commands © Rice Lake Weighing Systems ● All Rights Reserved...

Display or Scale weight source DISPLAY, SCALE REG.HTARE Allow tare in display hold NO, YES REG.ZTARE Remove tare on ZERO NO, YES * 720i Batch Version Software only REG.KTARE Always allow keyed tare NO, YES REG.MTARE Multiple tare action REPLACE, REMOVE, NOTHING REG.NTARE...

Span calibration 0–65535 #n indicates the slot number assigned to the analog output. Single-channel cards are assigned ALGOUT2. Table 11-8. ALGOUT Serial Commands (Valid Only If Analog Output Card Is Installed) © Rice Lake Weighing Systems ● All Rights Reserved...

720i Programmable HMI Indicator/Controller Command Description Values OFF, GROSS, NET, –GROSS, –NET, ACCUM, ROC, +REL, –REL, %REL, RES- REL, PAUSE, DELAY, WAITSS, COUNTER, AUTOJOG, COZ, INMOTON, SP.KIND#n Setpoint kind INRANGE, BATCHPR, TIMER, CONCUR, DIGIN, AVG, TOD, DELTA, CHWEI, PLSCNT, PLSRAT, ALWAYS, NEVER, DINCNT SP.VALUE#n...

DB.DATA. The 720i responds with the entire contents of the database. Returned data is cell-delimited with the pipe character (ASCII 124) and row-delimited with carriage returns (ASCII 13). For example, the following command could be used to return the contents of database 1 in the onboard memory: DB.DATA.1#0...

The db.schema command is used to get or set the structure of a database. DB.SCHEMA. The 720i responds to the command above by returning the following: ,, ,,,... The , , and elements repeat for each column in the database.

Two consecutive decimals send the decimal point even if it falls at the end of the transmitted weight field. — Carriage return — Line feed Table 12-8. Custom Stream Format Identifiers © Rice Lake Weighing Systems ● All Rights Reserved...

32.15075 troy ounces 2.679229 troy pounds 0.001102 short tons 0.000984 long tons 0.001000 metric tons short tons 2000.00 pounds 907.185 kilograms 0.892857 long tons 0.907185 metric tons Table 12-9. Conversion Factors © Rice Lake Weighing Systems ● All Rights Reserved...

Marked 6000/10,000 divisions UK 2893 The 720i complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.

Specifications subject to change without notice. Rice Lake Weighing Systems is an ISO 9001 registered company. 230 W. Coleman St. • Rice Lake, WI 54868 • USA U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319 July 17, 2019 www.ricelake.com...

replacing lcd panel in rice lake 720i free sample

OCS Technologies is a multi-disciplined calibration service provider as well as leading product distributor. We provide a full scope of calibration and metrology solutions in the areas of Dimensional, Electrical, Force, Hardness, Mass, Optical, Pressure, Thermodynamics, Torque, Vision, and Weighing Systems. We’re always adding new product lines to serve our growing customer base.

OCS is accredited by the ANAB National Accreditation Board to the demanding ISO/IEC 17025 standard for calibration laboratories. OCS is a proud member of the National Conference of Standards Laboratories, National Conference on Weights & Measures, American Society for Quality, and the National Association for Proficiency Testing.

replacing lcd panel in rice lake 720i free sample

Cable, Comm DB9F 9 Pin Fem One end stripped and tinned on other end 6' Pin 2 (Brown) Pin 3 (Red) Pin 5 (Yellow) For use with MSI8004HD serial ports to connect to: Scoreboard displays, printers, computers & other equipment that supports RS-232

An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.MSI-9850 CellScale RF Digital Indicator

An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.SCT-1100 and SCT-2200 Advanced Series

Includes one single-channel transmitter and one receiver, paired. In165312 cludes an RS-232 cable, a 2 m load cell cable and 2 m indicator cable/ 5 lb

replacing lcd panel in rice lake 720i free sample

The Rice Lake 720i is a mid level programmable indicator suitable for many industrial weighing applications when storing data, advanced networking or operator prompts are required. A full numeric keypad and 4 programmable softkeys make it easy for operators to follow prompts, enter tare values, enter truck IDs or change menu settings. Standard PCE software includes 6 Truck In/Out modes for use with truck scales.Standard communication options include a keyboard port, two independent RS-232 ports and functionality for 20mA serial communication on one port for applications that require long distance serial communications such as remote displays on truck scales. Controlling external devices is possible with the 8 digital inputs/outputs. Option cards are available for additional communication ports, additional digital inputs/outputs or analog output. The 720i also has the functionality for local and remote operation when two units are connected together. With a NEMA 4X/IP66 rated enclosure constructed of heavy gauge stainless steel this indicator is able to handle harsh environmental conditions.

replacing lcd panel in rice lake 720i free sample

Rice Lake Weighing Systems SURVIVORÂ® truck scales are commonly referred to as the Toughest Scales on EarthÂ®. They are designed to provide reliable performance under the most demanding conditions. SURVIVOR truck scales are built with more structural steel, a superior support structure and innovative design features that provide consistent accuracy, less downtime and longer scale life. Each SURVIVOR is built with the exclusive five-step finishing process. Take a look at some of the different Rice Lake Survivor truck scale models below.

The SURVIVOR OTR Series truck scale is an outstanding design that incorporates the most advanced engineering and production technology to manufacture the highest quality vehicle weighing system in the marketplace.

The ATV is rigidly constructed for heavy-duty weighing, yet lightweight and compact for convenient portability. The pre-assembled modules (available in lengths from 10 â€“ 30 ft.) and unique self-seating hinge connectors provide easy installation, expansion and relocation for your growing business.

The SR concrete or steel deck modes are ruggedly designed with massive outboard beams available in a bolted or welded design. Load cells and mounting assemblies are easily accessed in the rugged, reinforced load cell pocket, through side access.

The PT Series truck scale is available in many standard sizes to satisfy most requirements, but we also understand that pit-type installations often involve replacing and existing mechanical or electronic scale.

SURVIVORÂ® M Series Levertronic Scales combine innovative features with time-proven durability that only a mechanical scale can deliver. In a market crowded with scales manufactured to compete on price alone, SURVIVOR M Series Scales are built from the ground up for lasting performance under the most extreme conditions.

SURVIVOR railroad track scales incorporate Rice Lakeâ€™s best-in-class weighbridge design to create a rugged, accurate heavy duty weighing system. Used in static weighing operations, the SURVIVOR RT Pit Type railroad track scale and the SURVIVOR PL Modular Type railroad track scale excel in high-accuracy, legal-for-trade weighing and meet AREMA and Cooper E-80 design specifications.

Rice Lakeâ€™s livestock scales are built from the ground up for lasting performance under the most severe circumstances. Whether you choose the RoughDeckâ„¢ SLV for single animal weighing or the SURVIVORÂ® AG, LV or LS, youâ€™re getting the Toughest Scale on EarthÂ®.

Take a look below at “Six Facts” regarding heavy capacity solutions from Rice Lake. Did you know for applications where steel is preferred or downtime is critical, a great choice would be the SURVIVORÂ® OTR Steel Deck. Operational within a day, this easy-to-install steel deck scale sets the standard for truck scale design and performance, keeping downtime to a minimum. Tightly spaced wide flange I-beams form the industry’s strongest weighbridge design, weighing as many as 250 trucks per day for 25 years without a trace of weighbridge fatigue.

Weighbridge design and the weight of structural steel used directly affect the life of a truck scale. Many truck scale designs incorporate low grade, non-certified steel and an inferior design to reduce the cost and decrease production time. These reductions also reduce the life of the scale. Rice Lake SURVIVORÂ® series truck scales utilize up to 30% more steel than most competitive models and incorporate a longitudinal highway bridge design. More I-beams are strategically placed longitudinally with the traffic flow to ensure tire support regardless of truck position.

Load cell pockets that are welded or bolted to exterior I-beams allow excessive bending and flexing, causing damage to the weighbridge. Bumper bolts loosen and break. Check rods bind. Rice Lakeâ€™s SURVIVORÂ® series truck scales are designed with the load cell pocket integrated into the steel structure of the scale. The pocket is built inside the outer I-beam, offering a more durable, long-lasting load cell pocket. The SURVIVORÂ® series scales feature the G-Forceâ„¢ self-checking mounting system, eliminating the need for check rods or bumper bolts.

Closed-bottom weighbridge designs with both top and bottom plates, typically using lighter weight components, create cavities that tend to hold moisture causing rusting of internal components. Rice Lakeâ€™s SURVIVORÂ® steel deck truck scales feature an open-bottom design providing unrestricted airflow eliminating rust causing moisture buildup, which accelerates rusting of internal steel and imminent scale failure.

Harsh environments and corrosive materials can quickly deteriorate improperly finished truck scale components. Rice Lakeâ€™s SURVIVORÂ® series truck scales are steel shot blasted according to the highest industry standards to remove mill scale and surface imperfections. An asphalt emulsion undercoating is applied to all non-visible steel surfaces on all steel deck models to protect against moisture damage. High-performance epoxy primer and specialized hard-coat alkyd enamel is applied to all visible steel surfaces for a car-like finish that protects the scale from the elements.

Replacing truck scales on existing foundations or fitting truck scales to unique locations or space limitations need not incur extra design fees. Rice Lakeâ€™s SURVIVORÂ® series truck scales can be custom-built to fit almost any application.

These truck scales are only a part of the equation. Rice Lake offers not only the scale, but also the complete solution for your weighing application. From automated ticketing and truck transaction data collection systems to intelligent controllers like the 920i, to advanced cell diagnostics. And of course no truck scale is complete without a Ticketpress ticket printer and Laserlight Remote Display.

replacing lcd panel in rice lake 720i free sample

M2000A indicators have proven themselves to operate effectively and optimize scale performance in any industrial weighing application. Today, thousands of M2000A indicators are in service on everything from extreme capacity railroad and vehicle scales to precision portioning and check-weighing scales.

A wide range of standard and optional features allows the indicator to be easily customized for a variety of customer needs. This versatility makes the M2000A the ideal choice for both new installations and existing system upgrades.

It’s reliable and durable:Proven design hold up to the tough environments and demands of industrial weighing5 available enclosure models to suit any application

One scale channel, one serial port. The M2000A-1 has the same high performance and most of the features and functions of the M2000A, but at a reduced price. Best suited to single scale applications where speed and reliability are a must. M2000A-1 indicators are most often found on floor scales, bench scales and as parts of sophisticated weighing systems where Smart1 Microcontrollers or PC computers control the system operations.

A wide range of standard and optional features allows the indicator to be easily customized for a variety of customer needs. This versatility makes the M2000A-1 the ideal choice for both new installations and existing system upgrades.

This option is reliable and durable:Proven design hold up to the tough environments and demands of industrial weighing5 available enclosure models to suit any application

The M2000D Digital Weighing System converts the weak, sensitive analog signals from standard (non-proprietary) load cells to strong, interference-resistant digital data inside the DLC (Digital Load Cell Converter) Module. Digital signals allow for extra long cable runs and individual load cell communication, improving system performance and accuracy while reducing calibration and troubleshooting time.

Lightning Protection and Transient Voltage Suppression are also key features of the Digital Weighing System as multi-stage protection is built in to both the DLC and the indicator. 4000 Volt optical and power isolation protects the valuable load cells, saving costly service bills.

This option is reliable and durable, providing:Proven design hold up to the tough environments and demands of industrial weighing5 available enclosure models to suit any application

From factory floors to far-away fields, the MAX indicator combines flexible power options, a weather-proof enclosure, high contrast LCD display, and selectable weighing modes like Livestock/Dynamic Weighing to offer a versatile choice for all types of portable weighing applications and environments.

Western Scale engineers have poured over the MAX, specifying battery-friendly components and designing the unique PowerMAX operating platform that intelligently regulates power resources and extends battery life. Combined with Western Scale"s traditional functionality, the MAX maximizes the features that make it a great choice for mobile weighing in any location.

It offers maximum stability:Digital Filtering for advanced stability and fast weight readingsPreset filtering configurations for different dynamic weighing applications

Best suited to bench and floor scales, the M1 is a basic, 5 button indicator that features the same high resolution and speed found in other Western instruments. A compact stainless steel enclosure and large display make the M1 a useful and suprisingly versatile indicator for simple weighing applications.

The M1 packs big processing power in a small package, making use of advanced features like digital filtering, customized tickets and programmable macros to continue meeting customer requirements into the future.

From food processing, to manufacturing and packaging, the Lightspeed Checkweigher Indicator is at home in any process environment where speed and accuracy are vital to maintaining production flow.

Unique digital filtering is employed to deliver rock-solid readings to production line workers without having to wait for time consuming settling or averaging. The 3 color bargraph can also be used to convey OVER, UNDER and ACCEPT weight data at a single glance. Store products, print statistical reports and more. Combine with the Lightspeed Scale Base to form a complete bench-top checkweighing system.

It features Dynarrest:Digital Vibration Filtering for advanced stability and speed in busy work areasFast readings increase productivity and efficiency

The DF3500 weighs a continuous load on a running belt to display flow rate and total delivered weight. Scale weight and belt speed readouts may also be selected. A pulse encoder is utilized for variable speed belts. Fixed speed belts use a centrifugal force switch or a pulsed idler switch. The display update rate is automatically determined from the encoder input rate. The flow rate is averaged for a steady display. Two setpoints are provided for each rate and total. Pulse outputs for a mechanical counter with "clear" feature and 4-20mA analog output for flow rate are also available.

Rice Lake"s well-rounded indicator, controller and weight display selection is led by the impressive and adaptable 920i, delivering more features, more programmability, and more power for your process. The 920i combines performance-driven circuitry, simplified architecture, and customized display features to take your system further. Choose from our universal, panel mount, or wall-mount style.

Up to ten different screens can be programmed to change with any given process, while graphic icons and messages show setpoint and function status. The multi-channel display feature shows the weight on an individual scale or a combination of totalized scales. When used in batching/mixing applications, one 920i is capable of handling multiple scale, flow temperature and pulse. It can control hundreds of I/O setpoints, queuing such things as gates and conveyors. The 920i"s complete database capability stores your important data and files.

Control of multiple scales and operations simultaneously, such as gates, conveyors, batching/mixing operations etc., as determined by timed intervals, temperature, weight and more.

Rice Lake"s 820i is more than a digital weight display. It"s also a high-powered programmable controller for automation of complex industrial processes.

For the most comprehensive combination of function and price, Rice Lake"s 820i is the instrument of choice. This versatile intelligent model boasts a powerful yet easy-to-use interface that can operate and display up to two scales simultaneously. The 820i allows users to automate formula selection, batch start up, data recall, or any frequently used process. Available in both universal and panel-mount versions.

Built-in software functionality includes programmability for alibi tracking, 25 definable print formats, and multi-range (interval). The 820i also conveniently stores up to 1,000 truck in/out records for recall at any time and simplifies truck scale data management with six truck modes and keyed tares.

The 720i from Rice Lake is an affordable path to gaining the function and ability of our more advanced intelligent indicators. From basic weighing and data collection to recipe formulation, inventory management and traceability, choose Rice Lake"s 720i. Advanced programmability using ProAction (PCEE) and enhanced data base storage make the 720i ideal for a wide variety of weighing applications. Available in both universal and panel-mount configurations.

The IQ plus 355 is a solid all-around indicator featuring the durability of a stainless steel enclosure and simple five-key operation. This basic weight indicator also offers analog output with the added ability to power as many as eight 350 ohm load cells or sixteen 700 ohm load cells. The IQ plus 355 is a solid choice for many industrial weighing needs.

VIRTUi provides the functionality of a basic weight indicator and puts it directly onto your computer screen. This PC-based solution is NTEP-approved and enables users to monitor cell diagnostics, set next calibration alerts, configure gross/net print formats as well as remotely view load cell status via a web browser when used with iQUBE.

replacing lcd panel in rice lake 720i free sample

You Might Also Be Interested In