1602 lcd display datasheet pricelist

ERMC1602SBS-2 is 16 characters wide,2 rows character lcd module,SPLC780C controller (Industry-standard HD44780 compatible controller),6800 4/8-bit parallel interface,single led backlight with white color included can be dimmed easily with a resistor or PWM,stn- blue lcd negative,white text on the blue color,wide operating temperature range,rohs compliant,built in character set supports English/Japanese text, see the SPLC780C datasheet for the full character set. It"s optional for pin header connection,5V or 3.3V power supply and I2C adapter board for arduino.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and Development Kit at the bottom of this page.

16x2 LCD modules are very commonly used in most embedded projects, the reason being its cheap price, availability, programmer friendly and available educational resources.

16×2 LCD is named so because; it has 16 Columns and 2 Rows. There are a lot of combinations available like, 8×1, 8×2, 10×2, 16×1, etc. but the most used one is the 16×2 LCD. So, it will have (16×2=32) 32 characters in total and each character will be made of 5×8 Pixel Dots. A Single character with all its Pixels is shown in the below picture.

Now, we know that each character has (5×8=40) 40 Pixels and for 32 Characters we will have (32×40) 1280 Pixels. Further, the LCD should also be instructed about the Position of the Pixels. Hence it will be a hectic task to handle everything with the help of MCU, hence an Interface IC like HD44780is used, which is mounted on the backside of the LCD Module itself. The function of this IC is to get the Commands and Data from the MCU and process them to display meaningful information onto our LCD Screen. You can learn how to interface an LCD using the above mentioned links. If you are an advanced programmer and would like to create your own library for interfacing your Microcontroller with this LCD module then you have to understand the HD44780 IC working and commands which can be found its datasheet.

Across Arduino projects, you need a display unit to reflect the output visually. It is perfect to integrate a display that can demonstrate your results in an LCD format. In case your project requires only a little-sized unit, the LCD 1602 LCD Display is likely to be a perfect choice for your Arduino or other projects. It brings simpler solutions that are too, at competitive prices. Users can mount 16 x 2 White on RGB LCD (Liquid Crystal Display) into your innovative projects.

Further, the display under question is a panel that can hold 16 characters divided into two lines with a blue color background. Ultimately, it delivers a crystal-clear presentation with high contrast in the white-color text format. The unit further justices the superiority in many ways. It is quite brilliant when it comes to integrating with Arduino projects. Users will have no hassle to interface the unit with Arduino and other microcontrollers.

On the display presentation, the unit will show the values either in the simple text format or numerical values. The sensor reads the data and conveys it to readers through the LCD display in numerical or text shapes. For instance,it can show the temperature, pressure as well as the number of cycles performed by Arduino.

If you"re looking forward to making your Arduino projects display status messages/readings, implementing the LCD1602 LCD Display is a great thought. In fact, it is the best and common way to embrace your Arduino projects with interface prospects.

Since the LCD 1602 Display presents text/characters only, therefore it is named as character LCD. It integrates an LED backlight that can show 32 ASCII characters in two rows (16 characters on each row).

E (Enable): Simply, this pin is used to enable the display. It processes the incoming data after you set the pin on HIGH. However, it doesn’t consider the data from R/W, RS, and other pins.

16x2 Character LCD - Black on Green is a 16 characters wide, 2 rows character LCD module. It utilizes industry-standard controller, works in 4/8-bit parallel interface. Display area is LED back-lit in yellow color.

This alphanumerics display can be easily interfaced with any host controller such as 8051 derivatives, PIC Series, AVR, ARM series of controllers or using development boards such as Arduino or Raspberry Pi. It fits in quite well for any electronic device design.

This GREEN COLOR 1602 CHARACTER LCD DISPLAY 16X2 LCD DISPLAY is 16 characters wide,2 rows character lcd module,SPLC780C controller (Industry-standard HD44780 compatible controller),6800 4/8-bit parallel interface,single led backlight with yellow green color included can be dimmed easily with a resistor or PWM,stn-lcd positive,dark blue text on the yellow green color,wide operating temperature range,rohs compliant,built in character set supports English/Japanese text, see the SPLC780C datasheet for the full character set.Optional 3.3v or 5v power supply and optional pin header connection.

This Arduino compatible 1602 LCD with Blue Backlight module is probably the simplest textual display for Arduino. It is a 16 characters wide and 2 row LCD module. Compatible with HD44780 interface. A single LED backlight with white text. Can be easily dimmed with a resistor or PWM, stn- blue LCD negative, white text in blue colour. What"s more! it can be used in any embedded systems, industrial device, security, medical and hand-held equipment.