panasonic commercial lcd displays made in china

With approximately 8,290,000 pixels, or about four times the pixels of a Full-HD display, images are highly detailed. This dynamic, large-screen display archives true-to-life, finely nuanced images. The 4K display is an excellent choice for meeting rooms where images are often viewed up close, and creates impressive ambience in signage applications for commercial facilities. It can be expected to attract considerable attention.

When installing multiple displays, the Cloning function lets you use a USB memory (or LAN network) to copy the settings of a parent display to other units, thus greatly shortening the setup time.

Playlists and schedules created with Content Management Software can be transferred to displays with USB memory or via LAN. Synchronized playback on multiple displays is also supported.

Compatible with Multi Monitoring & Control Software for addition of new functions, such as automatic searching for map displays and registered devices. Displays and peripheral equipment on the intranet can be controlled and their status can be monitored. Also error notification and error indication can be detected by an indication monitoring function (for a fee) for improved maintenance.

The stylish and slim design complies with the ADA standard (a depth of less than 4-inch (approx.100mm) with brackets) in all important aspects. The narrow bezel displays higher-impact images, further enhancing the 4K picture quality. The slim profile isn"t the least oppressive even when installed in a hanging configuration.

By simply inserting a USB memory stick onto which content has been saved, playback automatically starts. Since it is 4K compatible, it easily provides 4K digital signage without having to use a PC or set-top box. Content can be consecutively played*1 without letterboxing. Content can also be switched via LAN or multiple displays can be operated.*2

Compatible with Multi Monitoring & Control Software for addition of new functions, such as automatic searching for map displays and registered devices. Displays and peripheral equipment on the intranet can be controlled and their status can be monitored. Also error notification and error indication can be detected by an indication monitoring function (for a fee) for improved maintenance.

Playlists and schedules created with Content Management Software can be transferred to displays with USB memory or via LAN. Synchronized playback on multiple displays is also supported.

When installing multiple displays, the Cloning function lets you use a USB memory (or LAN network) to copy the settings of a parent display to other units, thus greatly shortening the setup time.

Panasonic Professional Displays deliver crystal clear images with unrivalled brightness and clarity, from standard-sized flat screens to video walls. With the flexibility to deliver your message indoors and outdoors and interact with your audience, no matter what the surroundings or conditions.

We’ve developed a wide range of professional displays from 43” to 98” for applications including digital signage, rental & staging, education and corporate environments. They’re well designed and well built, with unique technologies made for intensive operation and outstanding performance even in the most challenging environments.

Our energy-efficient technology gives you the freedom to display your message far and wide. We use LED backlighting and IPS Panels to provide high impact, pin-sharp images in all locations. Our digital signage can be viewed from both sides, even in bright places. Our High Definition displays allow wide viewing angles with thin bezels to ensure maximum exposure. And because brightness levels can be adjusted during installation, our displays can be used in any light conditions in venues as varied as train stations, airports, banks, shops and offices. Even our largest format in HD or 4K displays are slimline and light enough to be sited in virtually any location.

With public displays, strength is essential. We put our technology through rigorous testing to withstand both extreme weather and anti-social behaviour: from visibility testing with bright light conditions to resistance to water. We even test the toughness of our 4K screens by hurling an iron ball at them…

Our multi-touch professional LED displays offer simpler operation, more interactivity and a wide range of rich features providing new and exciting opportunities for education, retail or corporate uses. Combining intuitive touchscreen technology, fully interactive whiteboard functionality and cutting-edge wireless connectivity, they bring you and your colleagues closer together. Allowing you to collaborate more efficiently and productively than ever.

OSAKA -- Panasonic is poised to outsource production of televisions to Chinese rival TCL, the world"s third-largest TV maker, in the Japanese electronics group"s latest move to cut costs in a segment where its brand has faded, Nikkei has learned.

A plasma display panel (PDP) is a type of flat panel display that uses small cells containing plasma: ionized gas that responds to electric fields. Plasma televisions were the first large (over 32 inches diagonal) flat panel displays to be released to the public.

Until about 2007, plasma displays were commonly used in large televisions (30 inches (76 cm) and larger). By 2013, they had lost nearly all market share due to competition from low-cost LCDs and more expensive but high-contrast OLED flat-panel displays. Manufacturing of plasma displays for the United States retail market ended in 2014,

Plasma displays are bright (1,000 lux or higher for the display module), have a wide color gamut, and can be produced in fairly large sizes—up to 3.8 metres (150 in) diagonally. They had a very low luminance "dark-room" black level compared with the lighter grey of the unilluminated parts of an LCD screen. (As plasma panels are locally lit and do not require a back light, blacks are blacker on plasma and grayer on LCD"s.)LED-backlit LCD televisions have been developed to reduce this distinction. The display panel itself is about 6 cm (2.4 in) thick, generally allowing the device"s total thickness (including electronics) to be less than 10 cm (3.9 in). Power consumption varies greatly with picture content, with bright scenes drawing significantly more power than darker ones – this is also true for CRTs as well as modern LCDs where LED backlight brightness is adjusted dynamically. The plasma that illuminates the screen can reach a temperature of at least 1,200 °C (2,190 °F). Typical power consumption is 400 watts for a 127 cm (50 in) screen. Most screens are set to "vivid" mode by default in the factory (which maximizes the brightness and raises the contrast so the image on the screen looks good under the extremely bright lights that are common in big box stores), which draws at least twice the power (around 500–700 watts) of a "home" setting of less extreme brightness.

Plasma screens are made out of glass, which may result in glare on the screen from nearby light sources. Plasma display panels cannot be economically manufactured in screen sizes smaller than 82 centimetres (32 in).enhanced-definition televisions (EDTV) this small, even fewer have made 32 inch plasma HDTVs. With the trend toward large-screen television technology, the 32 inch screen size is rapidly disappearing. Though considered bulky and thick compared with their LCD counterparts, some sets such as Panasonic"s Z1 and Samsung"s B860 series are as slim as 2.5 cm (1 in) thick making them comparable to LCDs in this respect.

Wider viewing angles than those of LCD; images do not suffer from degradation at less than straight ahead angles like LCDs. LCDs using IPS technology have the widest angles, but they do not equal the range of plasma primarily due to "IPS glow", a generally whitish haze that appears due to the nature of the IPS pixel design.

Superior uniformity. LCD panel backlights nearly always produce uneven brightness levels, although this is not always noticeable. High-end computer monitors have technologies to try to compensate for the uniformity problem.

Earlier generation displays were more susceptible to screen burn-in and image retention. Recent models have a pixel orbiter that moves the entire picture slower than is noticeable to the human eye, which reduces the effect of burn-in but does not prevent it.

Due to the bistable nature of the color and intensity generating method, some people will notice that plasma displays have a shimmering or flickering effect with a number of hues, intensities and dither patterns.

Earlier generation displays (circa 2006 and prior) had phosphors that lost luminosity over time, resulting in gradual decline of absolute image brightness. Newer models have advertised lifespans exceeding 100,000 hours (11 years), far longer than older CRTs.

Uses more electrical power, on average, than an LCD TV using a LED backlight. Older CCFL backlights for LCD panels used quite a bit more power, and older plasma TVs used quite a bit more power than recent models.

Fixed-pixel displays such as plasma TVs scale the video image of each incoming signal to the native resolution of the display panel. The most common native resolutions for plasma display panels are 852×480 (EDTV), 1,366×768 and 1920×1080 (HDTV). As a result, picture quality varies depending on the performance of the video scaling processor and the upscaling and downscaling algorithms used by each display manufacturer.

The following ED resolutions were common prior to the introduction of HD displays, but have long been phased out in favor of HD displays, as well as because the overall pixel count in ED displays is lower than the pixel count on SD PAL displays (852×480 vs 720×576, respectively).

Early high-definition (HD) plasma displays had a resolution of 1024x1024 and were alternate lighting of surfaces (ALiS) panels made by Fujitsu and Hitachi.

Later HDTV plasma televisions usually have a resolution of 1,024×768 found on many 42 inch plasma screens, 1280×768 and 1,366×768 found on 50 in, 60 in, and 65 in plasma screens, or 1920×1080 found on plasma screen sizes from 42 inch to 103 inch. These displays are usually progressive displays, with non-square pixels, and will up-scale and de-interlace their incoming standard-definition signals to match their native display resolutions. 1024×768 resolution requires that 720p content be downscaled in one direction and upscaled in the other.

Every pixel is made up of three separate subpixel cells, each with different colored phosphors. One subpixel has a red light phosphor, one subpixel has a green light phosphor and one subpixel has a blue light phosphor. These colors blend together to create the overall color of the pixel, the same as a triad of a shadow mask CRT or color LCD. Plasma panels use pulse-width modulation (PWM) to control brightness: by varying the pulses of current flowing through the different cells thousands of times per second, the control system can increase or decrease the intensity of each subpixel color to create billions of different combinations of red, green and blue. In this way, the control system can produce most of the visible colors. Plasma displays use the same phosphors as CRTs, which accounts for the extremely accurate color reproduction when viewing television or computer video images (which use an RGB color system designed for CRT displays).

Plasma displays are different from liquid crystal displays (LCDs), another lightweight flat-screen display using very different technology. LCDs may use one or two large fluorescent lamps as a backlight source, but the different colors are controlled by LCD units, which in effect behave as gates that allow or block light through red, green, or blue filters on the front of the LCD panel.

Contrast ratio is the difference between the brightest and darkest parts of an image, measured in discrete steps, at any given moment. Generally, the higher the contrast ratio, the more realistic the image is (though the "realism" of an image depends on many factors including color accuracy, luminance linearity, and spatial linearity). Contrast ratios for plasma displays are often advertised as high as 5,000,000:1.organic light-emitting diode. Although there are no industry-wide guidelines for reporting contrast ratio, most manufacturers follow either the ANSI standard or perform a full-on-full-off test. The ANSI standard uses a checkered test pattern whereby the darkest blacks and the lightest whites are simultaneously measured, yielding the most accurate "real-world" ratings. In contrast, a full-on-full-off test measures the ratio using a pure black screen and a pure white screen, which gives higher values but does not represent a typical viewing scenario. Some displays, using many different technologies, have some "leakage" of light, through either optical or electronic means, from lit pixels to adjacent pixels so that dark pixels that are near bright ones appear less dark than they do during a full-off display. Manufacturers can further artificially improve the reported contrast ratio by increasing the contrast and brightness settings to achieve the highest test values. However, a contrast ratio generated by this method is misleading, as content would be essentially unwatchable at such settings.

Each cell on a plasma display must be precharged before it is lit, otherwise the cell would not respond quickly enough. Precharging normally increases power consumption, so energy recovery mechanisms may be in place to avoid an increase in power consumption.LED illumination can automatically reduce the backlighting on darker scenes, though this method cannot be used in high-contrast scenes, leaving some light showing from black parts of an image with bright parts, such as (at the extreme) a solid black screen with one fine intense bright line. This is called a "halo" effect which has been minimized on newer LED-backlit LCDs with local dimming. Edgelit models cannot compete with this as the light is reflected via a light guide to distribute the light behind the panel.

Plasma displays also exhibit another image retention issue which is sometimes confused with screen burn-in damage. In this mode, when a group of pixels are run at high brightness (when displaying white, for example) for an extended period, a charge build-up in the pixel structure occurs and a ghost image can be seen. However, unlike burn-in, this charge build-up is transient and self-corrects after the image condition that caused the effect has been removed and a long enough period has passed (with the display either off or on).

The first practical plasma video display was co-invented in 1964 at the University of Illinois at Urbana–Champaign by Donald Bitzer, H. Gene Slottow, and graduate student Robert Willson for the PLATO computer system.Owens-Illinois were very popular in the early 1970s because they were rugged and needed neither memory nor circuitry to refresh the images.CRT displays cheaper than the $2500 USD 512 × 512 PLATO plasma displays.

Burroughs Corporation, a maker of adding machines and computers, developed the Panaplex display in the early 1970s. The Panaplex display, generically referred to as a gas-discharge or gas-plasma display,seven-segment display for use in adding machines. They became popular for their bright orange luminous look and found nearly ubiquitous use throughout the late 1970s and into the 1990s in cash registers, calculators, pinball machines, aircraft avionics such as radios, navigational instruments, and stormscopes; test equipment such as frequency counters and multimeters; and generally anything that previously used nixie tube or numitron displays with a high digit-count. These displays were eventually replaced by LEDs because of their low current-draw and module-flexibility, but are still found in some applications where their high brightness is desired, such as pinball machines and avionics.

In 1983, IBM introduced a 19-inch (48 cm) orange-on-black monochrome display (Model 3290 Information Panel) which was able to show up to four simultaneous IBM 3270 terminal sessions. By the end of the decade, orange monochrome plasma displays were used in a number of high-end AC-powered portable computers, such as the Compaq Portable 386 (1987) and the IBM P75 (1990). Plasma displays had a better contrast ratio, viewability angle, and less motion blur than the LCDs that were available at the time, and were used until the introduction of active-matrix color LCD displays in 1992.

Due to heavy competition from monochrome LCDs used in laptops and the high costs of plasma display technology, in 1987 IBM planned to shut down its factory in Kingston, New York, the largest plasma plant in the world, in favor of manufacturing mainframe computers, which would have left development to Japanese companies.Larry F. Weber, a University of Illinois ECE PhD (in plasma display research) and staff scientist working at CERL (home of the PLATO System), co-founded Plasmaco with Stephen Globus and IBM plant manager James Kehoe, and bought the plant from IBM for US$50,000. Weber stayed in Urbana as CTO until 1990, then moved to upstate New York to work at Plasmaco.

In 1994, Weber demonstrated a color plasma display at an industry convention in San Jose. Panasonic Corporation began a joint development project with Plasmaco, which led in 1996 to the purchase of Plasmaco, its color AC technology, and its American factory for US$26 million.

In 1995, Fujitsu introduced the first 42-inch (107 cm) plasma display panel;Philips introduced the first large commercially available flat-panel TV, using the Fujitsu panels. It was available at four Sears locations in the US for $14,999, including in-home installation. Pioneer also began selling plasma televisions that year, and other manufacturers followed. By the year 2000 prices had dropped to $10,000.

In the year 2000, the first 60-inch plasma display was developed by Plasmaco. Panasonic was also reported to have developed a process to make plasma displays using ordinary window glass instead of the much more expensive "high strain point" glass.

In late 2006, analysts noted that LCDs had overtaken plasmas, particularly in the 40-inch (100 cm) and above segment where plasma had previously gained market share.

Until the early 2000s, plasma displays were the most popular choice for HDTV flat panel display as they had many benefits over LCDs. Beyond plasma"s deeper blacks, increased contrast, faster response time, greater color spectrum, and wider viewing angle; they were also much bigger than LCDs, and it was believed that LCDs were suited only to smaller sized televisions. However, improvements in VLSI fabrication narrowed the technological gap. The increased size, lower weight, falling prices, and often lower electrical power consumption of LCDs made them competitive with plasma television sets.

Screen sizes have increased since the introduction of plasma displays. The largest plasma video display in the world at the 2008 Consumer Electronics Show in Las Vegas, Nevada, was a 150-inch (380 cm) unit manufactured by Matsushita Electric Industrial (Panasonic) standing 6 ft (180 cm) tall by 11 ft (340 cm) wide.

At the 2010 Consumer Electronics Show in Las Vegas, Panasonic introduced their 152" 2160p 3D plasma. In 2010, Panasonic shipped 19.1 million plasma TV panels.

Panasonic was the biggest plasma display manufacturer until 2013, when it decided to discontinue plasma production. In the following months, Samsung and LG also ceased production of plasma sets. Panasonic, Samsung and LG were the last plasma manufacturers for the U.S. retail market.

Panasonic Liquid Crystal Display (PLD) announced a plan to terminate LCD panel production by the end of 2021 and hold an auction of the production equipment in its 8.5th-generation (8.5G) plant located in Himeji, Hyogo Prefecture of Japan. The equipment comprises approximately 1,000 pieces of production machinery, with the number of auction items totaling 9,000, including apparatuses that can be used by non-semiconductor and non-LCD panel manufacturers.

As reported by Japanese media, PLD has added equipment of front-end process to the auction, including machines of color filter production, mid- and small-size panel assembly, module packaging, and analysis and testing, as well as cleanrooms. The 8.5G production line of PLD’s Himeji plant can produce 40,000–50,000 panels per month; the said equipment was initially used to manufacture LCD panels and then turned to produce advanced medical LCDs in 2016.

Amid fierce competition in the market, PLD outsourced the production of mid- and low-end TVs to TCL, the third largest TV manufacturer in China, so as to lower its business cost. Additionally, Panasonic Group has considered merging or downsizing its production bases in Japan and abroad; in the present fiscal year, for example, the company’s plants in India and Vietnam will suspend TV production.

News has revealed that Panasonic used to be a giant LCD business and has been one of the top Japanese companies with more than 100 years of history (others include Sony, Toshiba, and SHARP). However, facing changes in the display industry with increasing popularity of large-size panels and ultra-HD monitors, this ex-leader has been slow in transformation and stuck to the original LCD production. Consequently, the corporation continues to witness a decline in profits and is under huge pressure. Regarding the present auction plan, Panasonic officially revealed that because of fierce competition and changes in the entire market, the company has decided to stop LCD production despite its intention to invest in new product development.

Osaka, Japan-based Panasonic has been a significant force in the TV business for decades. Like many Japanese manufacturers, they manufactured their own LCD panels for cost and quality control. But competition in that business has been heating up for years, and Japanese manufacturers have had to deal with currency issues increasing their costs, a worldwide softening of demand, and brutal competition from mass manufacturers out of South Korea and China.

This decision means that there will only be two factories remaining in Japan making panels for TVs – both owned by the troubled Sharp Corp. Sharp has one LCD panel production facility in the Mie Prefecture, and another at its Sakai factory in the Osaka Prefecture which was jointly owned by Taiwan’s Hon Hai Precision Industry Co (better known as Foxconn).

While Panasonic will stop making LCD panels for TV sets, it will continue to make specialty LCD panels for other uses, such as for vehicles and medical devices. The company is said to be enjoying greater growth, and more profitability, in these other businesses.

Of the 1,000 people working at the plant, the company hopes to preserve their jobs by reassigning them to other Panasonic factories in other divisions. A smaller contingent will be retained to make those specialty panels, as the company expects the total output to drop by 75%.

Ironically, Panasonic will continue to make LCD flat panel TVs. However, after September these sets will employ panels made by someone else – most likely a South Korean or Chinese company. I guess if you can’t beat them…join them.

Despite the fact that Panasonic has been producing television sets for a very long time. The question of who makes the TVs seems not entirely appropriate, but nevertheless it is not so. Many companies turned their brands over to other companies and stopped producing televisions.

Panasonic – switched to a mixed model for the production of TVs, some models of TVs are produced by other companies according to the outsourcing scheme. A part is made at the enterprises of Panasonic.

Until 2016, Panasonic manufactured displays for its TVs in its own factory, which was part of Panasonic Liquid Crystal Display Co., Ltd. In 2016, the company decided to stop the production of panels for TVs. Panasonic announced that due to the unprofitable production of television displays and increased competition from Chinese and Taiwanese companies, a decision was made to stop production. In fact, this means that the production quality of television panels, for example by BOE or AU Optronics, is commensurate with the quality of production of their own screens. At least visually.

Therefore, since 2017, Panasonic TVs have screens manufactured by other companies. And in 2019, Panasonic decided to completely close Panasonic Liquid Crystal Display Co., Ltd, this will happen in 2021. Panasonic plans to focus more on manufacturing equipment for the industry.

Panasonic TVs in Russia are manufactured by TPV using an outsourcing scheme. TPV also bought a Philips TV brand license. The assembly plant is located in the village of Shushary. At this enterprise, only entry-level televisions are assembled. Televisions made in Russia are offered for the domestic market of Russia, can be delivered to nearby countries.

Panasonic orders the production of televisions from the Turkish concern Vestel. These are mainly entry-level televisions. Vestel-made televisions are shipped to Africa, and some models may go on sale in other countries.

The Pilsen TV factory provides European countries with televisions. LED and OLED TVs are assembled at the factory. This is a Panasonic factory, in addition to TVs, the factory also produces Blu-ray players, and since 2018, a line for the production of heat pumps and air conditioners has been opened.

In Mexico, Panasonic manufactures televisions for Latin America and Canada, about 20% of the manufactured televisions are sold domestically in Mexico. There was information that Panasonic would sell a factory in Mexico, but in the end, the production of televisions continued in Mexico. But in smaller volumes since Panasonic does not sell its TVs in the United States. The factory also produces audio equipment. According to information in the press for the American continent, about 300,000 TV sets are produced per year.

In China, Panasonic manufactured TVs until 2016. Due to the financial crisis in the company and difficult competition with Chinese manufacturers. It was decided to close factories in China. For the Chinese market, it was decided to produce TVs according to the outsourcing scheme.

In Malaysia, there are about 20 Panasonic enterprises, as well as research centers. Televisions manufactured in Malaysia are sold in Africa, Asia, the Middle East, Japan and Australia. In Malaysia, the main production of components and assembly of finished products is concentrated.

TOKYO, April 12 (Reuters) - Japan"s Sharp Corpsaid it would begin selling 3D-capable LCD TVs in Japan this summer, the latest consumer electronics maker to enter the market for what is expected to be the industry"s next growth driver.

“We are now one step closer to such things as 3D displays with the world’s best quality or the ultimate display,” Sharp Executive Vice President Masafumi Matsumoto told a news conference on Monday.

Demand for 3D TVs will likely grow more than 10-fold to 27 million units in 2013 from an estimated 2.5 million units this year, according to research firm DisplaySearch.

Sharp said high response speeds of its 3D TV use LCD panels help eliminate double-contour ghost images known as “crosstalk”, which often occur with 3D images.

Sharp plans to start making advanced 3D displays for cellphones and other mobile devices this year that do not require special glasses, betting that demand for 3D images will grow beyond movie theatres and living rooms to portable machines.

Matsumoto did not disclose how many LCD TVs Sharp aims to sell this financial year, but he said the company had achieved its LCD TV sales target of 10 million units for the year that ended on March 31, and plans to boost LCD TV output substantially this year.

Separately, rival Panasonic announced on Monday that it has started operating a new LCD plant in Japan three months ahead of schedule to capitalise on a recovery in the global flat TV market.

Following the announcements, shares of Sharp closed down 1.3 percent at 1,188 yen and Panasonic ended down 0.7 percent at 1,413 yen, underperforming the Tokyo stock market"s electrical machinery index, which edged up 0.1 percent. (Additional reporting by Nobuhiro Kubo and Taiga Uranaka; Editing by Michael Watson)

Sony Corp"s and Panasonic Corp"s ambitions for higher earnings this year depend on convincing Yin Weiguang, a retired construction worker in Beijing, that he chose the wrong television.

Sony and Panasonic, the world"s two largest makers of consumer electronics, are slashing some TV prices by a third in China after being outsold 6-to-1 by Shenzhen-based Skyworth. Sony aims to double TV shipments in China this fiscal year, and Panasonic expects 50 percent growth in the world"s second- largest market for flat-panel TVs.

Panasonic, the world"s biggest maker of plasma TVs, may cut prices of some models in China as much as 50 percent this year, Hitoshi Otsuki, senior managing director of the Osaka-based company"s overseas operations, said in an interview last week.

Sales of liquid-crystal-display (LCD) TVs in China will rise 15 percent to 45.5 million next year and overtake North America shipments, according to DisplaySearch estimates. China will become the biggest flat-panel TV market, including plasma sets, in 2012, according to the Austin, Texas-based researcher.